FCC ID: 2AFG6-SA05 Android Module

Android Module User Manual Android Module 1. Safety and Precautions Before using the device, please read this instruction carefully in avoidance of any potential dangers or operations that may may cause faults to the product. Usage Environment Do not place the product in dusty and humid environments in case of internal circuit fault. Do not place the product near heating devices (such as electrical heater). Normal operating temperature is 0~40 , normal operating humidity is 10%~90%RH. Children Safety The product and accessories may contain some tiny components. Please place them beyond the reach of children in avoidance of swallowing danger. Waterproof Function The product is not waterproof . Please keep it dry. Maintenance and Care Maintenance of this product should be only performed by qualified technicians. Do not insert any sharp objects into this product. Please avoid of intense hit or drop on the product. Before moving the product, please unplug the AC power cord from power socket. To avoid damages caused by frequent startup and shutdown, wait for at least 30 seconds before restaring the product. All the operations such as removal or installation shall be implemented on the electrostatic discharge (ESD) worktable, because some precision components are sensitive to electrostatic discharge. If there is no ESD worktable, please take the following measures to minimize possible damages from electrostatic discharge:

Wear an antistatic wrist strap during operation;

Always touch the metal chassis of frame of the corresponding products before removal or installation of any components. 2. Installation Steps Items Function Description 6. Statements Warning:

Please make sure the power cord is disconnected before conducting the following operations. The image shown in this manual is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. Screw off and take off the metal plate. 7. RF & Power 1 2 3 4 5 6 WIFI antenna interface Working indicator light, normal working is blue USB3.0 interface, to connect USB devices, such as mobile hard disk, U disk, USB keyboard and mouse, USB drives, etc Micro SD card slot Netrwork interface, connecting RJ45 port to connect to the Internet (it can only work in Android system for Internet) Recovery slotonly for professional maintenance personnel Frequency Range Output Power (Max.) 2402 to 2480 MHz (BT) 6.92 dBm 2412 to 2462 MHz 17.35 dBm 5150 to 5250 MHz 5725 to 5850 MHz 19.75 dBm 19.25 dBm Software: V1.0.0 Antenna Type:Dipole Antenna Gain: BT/ 2.4G Wifi 2.55dBi;5G wifi 3.87dBi Antenna Impedance:50 5150-5250MHz is only for indoor use. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body. Insert the Android module as showed on the left picture. Screw down the module as showed on the left picture.The installation is finished. 4. Power Power supply mode: DC IN Voltage range: 12/19V Power supply current: 1.5A 5. Connection and Settings USB equipment connection Do not plug or unplug wires or other devices when the unit is powered on. Note:

The android module can only work when the unit is in Android channel. 3. External Interface 1 2 3 4 5 Network cable connection USB Equipment Router and other network signal output RECOVERY USB3.0 microSD LAN 6 RECOVERY USB3.0 micro SD LAN Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. This End equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ISED This device complies with license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This radio transmitter (IC: 22166-SA05) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 22166-SA05) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Caution:

(i)

(ii)

(i) Avertissement:

The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725- 5850 MHz shall be such that the equipment still complies with the EIRP limits specified for point-to-point and non-point-to-point operation as appropriate;

les dispositifs fonctionnant dans la bande de 5150 5250MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 5850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et l'exploitation non point point. Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps.

V1.0 R 3 0 7 R4 86 R4 Android Module Model No.: SA05 Supply source:

12/19V 1.5A CAUTION: TO PREVENT ELECTRICAL SHOOK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOT IN USE. DANGEROUS HIGH VOLTAGE INSIDE. FCC ID: 2AFG6-SA05 IC: 22166-SA05 5 3 1 70.6 R 4 1. 75#

2. 86*70mm 3. SA05-P01-K10301-V1.0 SA05--seewo mm label location

Declaration of Authorization We Name: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, City: Guangzhou State: Guangdong Country: China Declare that:

Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Android Module Type designation: SA05 Trademark: SEEWO FCC ID: 2AFG6-SA05 on our behalf. Date: 2020-07-22 City: Guangzhou Name: Sarah Sun Function: Regulatory Engineer Signature: . Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<2020-07-22>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AFG6-SA05 For the product stated above, we request that the following information be held confidential;

SA05 Model name Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) Name: Sarah Sun Company: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, Guangdong, China Phone: +86-13640798230 Fax: +86-20-82086168 E-Mail: sunxueping@cvte.com

< Guangzhou Shirui Electronics Co., Ltd >

<192 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China>

Date: 2020-07-22 FCC ID: 2AFG6-SA05 Model Number: SA05 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Guangzhou Shirui Electronics Co., Ltd declare that this EUT (FCC ID: 2AFG6-SA05) doesnt have Ad Hoc mode function on on-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Sarah Sun/Regulatory Engineer Company: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China Tel: +86-13640798230 Fax: +86-20-82086168 E-Mail: sunxueping@cvte.com