FCC ID: 2AFG6-UCS15 Integrated video conference terminal

110*170mm-2mm 770*170mm 128g+

--6 V1.0 V1.1 V1.2 V1.3 V1.4 V1.5 2022-5-17 2022-5-19 2022-5-24 2022-5-25 2022-5-25 2022-6-10 1 2 3.0(Device)3.0(Device): Connect USB host, support video input, upgrade system, etcEmpty MouseWireless mouse 13 seconds3s 23.0(Device) USB Type-CUSBDP IN,HDMI PIR WF20220527470 AUX IN/OUT AUDIO OUT Safety Warning and Precautions Statement 1. Product function Before using and operating this device, please read thoroughly and comply Intellectual property right statement: The patents cover the hardware Please familiarize yourself with the interface and buttons of the device with the following precautions in order to prevent accidents or abnormal design and software of this product. Anyone reproduces the product or the before using this device. operation. contents of this instruction without prior written permission from the Company shall be liable to legal prosecutions. Operating Environment The description, illustrations, etc. in this document may subject to DO NOT place the product in dusty and humid environments in case of change per the latest product specification and performance. internal short circuit. The product images are for illustrative purposes only and may slightly DO NOT place the product near heating devices(such as lectrical heater). differ in appearance, colour, size, etc. from the actual product. Operating temperature is 0-40, operating humidity is 10%-90%RH. The company reserves the rights to improve and change the 1 2 3 4 65 appearance and design of the product without notice. 7 8 9 10 11 12 Children Safety The product and accessories may contain some small parts. Please keep Accessories introduction them from children to avoid accidental swallowing or danger. Please check the following items in the product box. Power Supply Please use the standard power adapter. Keep Dry The product is NOT waterproof. Please keep it dry. HDMI cable1 Remote control1 Power adapter1 Wall-mounted components1 Peeping cover1 NoteAll the pictures in this manual are for reference only, subject to our available products. Maintenance Please contact technical support for maintenance services. DO NOT insert any sharp or pointed object into the device. Prevent the device from falls and collisions with other objects, which may Integrated Video Conference Terminal cause damages. User Manual 1 2 3 4 5 6 7 8 13 Camera Indicator light PIR: In power-on mode, it will automatically enter standby state if no moving object is detected within 3meters within 30minutes;

In standby mode, it automatically starts up when detecting moving objects within 3meters. Lockhole 9 AUDIO OUT: Used for external audio equipment. 10 11 3.0(Host): Connect USB devices such as U disk, USB keyboard and mouse, USB drives, etc. 2.0(Host): Connect USB devices such as U disk, USB keyboard and mouse, USB drives, etc. 3.0(Device): Connected to a computer, can access the device's camera, speaker, and microphone. 12 Note: Directly connected to the computer's USB Type-C interface

(Use original USB cable), can support DP IN, display content output from the HDMI interface. 13 Wall-mounted components 2. Camera Usage Method 1:

Place on the desktop. Method 2:

Wall-mounted: Fix the bracket onto the Wall with screws (Figure 1). 5. Remote Control 1 3 4 6 7 9 8 11 2 5 6 6 6 10 13 12

(Figure 2) 3. Connection Please connect the device as shown below before use. Display Device click OK to shut down, click cancel to cancel the current operation;

Press and hold for 3s to enter the shutdown state. HDMI Cable 2. : Camera Switch, enable or disable the camera. 1. : Power Button Short press: external display device will show 10s countdown shutdown, LAN: Connect RJ45 terminals, support POE power supply. Method 3:

DC: Used for 12V power input power supply. Position the bracket to the bottom of the Integrated Video Conference Terminal by hand. Please use HDMI cable to connect this product to the monitor. After cable connection, plug in power cord, and press the power button on the back of the product or use remote control. cancelled in response to preset bit switching. HDMI OUT: Connect to the devices with HDMI input function. Place the Integrated Video Conference Terminal with the bracket on the After successful startup, the product functions can be used. POWER: Double-click to enter the Bluetooth remote control top of the matching display equipment and adjust the bracket to clamp the matching state. display device (Figure 2). Hold down to set the preset mode. Default: can be adjusted freely, but cannot be saved. To switch to any mode, hold down to save it in the corresponding mode.

(Figure 1) 4. Quick Start Integrated video conference terminal 3. : AutoFraming, turn on and off AutoFraming, which automatically frames the scene according to the number of attendees. 4. : Presets Short press cycle to switch the preset function (mode 1, mode 2, mode 3). If Autoframing is on when pressed, Autoframing will be automatically 5. : Menu Button, open the menu function. It contains application switch, Bluetooth remote control pairing instructions If the pairing fails, the following message is displayed. You need to hold Federal Communication Commission Interference This equipment complies with FCC radiation exposure limits set forth for an Pour se conformer aux exigences de conformit CNR 102 RF exposition, recently used application, task clearing and other functions can be operated. Pair the wireless remote control and press the mouse button down the combination key "Home Button + Return Button" again to initiate Statement uncontrolled environment. This equipment should be installed and operated une distance de sparation d'au moins 20 cm doit tre maintenue entre 6. Direction Button 7. OK Button:

Navigation keys Control the top, bottom, left and right of the camera. 8. : Return Button Return to previous page Or hold down the combination key "Home Button + Return Button " for 3s. are designed to provide reasonable protection against harmful interference Class B digital device, pursuant to Part 15 of the FCC Rules. These limits body. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile a pairing:

This equipment has been tested and found to comply with the limits for a with a minimum distance of 20cm between the radiator and any part of your l'antenne de cet appareil ettoutes les personnes. in a residential installation. This equipment generates, uses, and can Non-modification Statement:

satellite systems radiate radio frequency energy and, if not installed and used in accordance Changes or modifications not expressly approved by the party responsible Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont The pairing prompt interface will pop up. Press Return or Home to exit the with the instructions, may cause harmful interference to radio communica-

for compliance could void the user's authority to operate the equipment. rservs uniquement pour une utilisation lintrieur afin de rduire With the home button, long press 3s to achieve Bluetooth pairing function. page, as shown in the figure:

9. : Turn on/off the microphone 10. : Home Button Return to the home page With the return button, long press 3s to achieve Bluetooth pairing. 11. : Volume Button Adjust system volume Hold down the OK button and then press volume+or volume- to adjust the wireless mouse sensitivity. 12. : Wireless mouse, turn on/off the wireless mouse 13. : Digital Zooming, digital camera focus, zoom in or zoom out the After long press again for 3s, videobar will automatically pair with the remote control. You can press the Return Button or the Home Button to exit picture can use the direction button to move the picture perspective; Mutually the page. exclusive with Autoframing. For the pair-connected remote control, long press the combination key ence by one or more of the following measures:

licence-exempt RSS(s). Operation is subject to the following two

"Home Button + Return Button " for 3s to disconnect:

Reorient or relocate the receiving antenna. conditions:

tions. However, there is no guarantee that interference will not occur in a les risques de brouillage prjudiciable aux systmes de satellites mobiles particular installation. If this equipment does cause harmful interference to ISED Radiation Exposure Statement for Canada utilisant les mmes canaux. radio or television reception, which can be determined by turning the This device contains licence-exempt transmitter(s)/receiver(s) that comply Hereby, Guangzhou Shirui Electronics Co., Ltd. declares that the radio equipment off and on, the user is encouraged to try to correct the interfer-

with Innovation, Science and Economic Development Canadas Equipment is in compliance with Directive 2014/53/EU. Increase the separation between the equipment and receiver. 1.This device may not cause interference. Connect the equipment into an outlet on a circuit different from that to 2.This device must accept any interference, including interference that may which the receiver is connected. cause undesired operation of the device. Consult the dealer or an experienced radio/TV technician for help. Lmetteur/rcepteur exempt de licence contenu dans le prsent FCC Caution:

appareil est conforme aux CNR dInnovation, Sciences et Dveloppe-

ment conomique Canada applicables aux appareils radio exempts de This device complies with Part 15 of the FCC Rules. Operation is subject to licence. Lexploitation est autorise aux deux conditions suivantes :

the following two conditions:

1.Lappareil ne doit pas produire de brouillage;

(1) This device may not cause harmful interference, and 2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le

(2) this device must accept any interference received, including interfer-

brouillage est susceptible den compromettre le fonctionnement. ence that may cause undesired operation. This equipment complies with ISED RSS-102 radiation exposure limits set Caution: The user is cautioned that changes or modifications not expressly forth for an uncontrolled environment. This equipment should be installed approved by the party responsible for compliance could void the user's and operated with a minimum distance of 20cm between the radiator and authority to operate the equipment. any part of your body. This symbol, affixed to the product or its packaging, indicates that the product must not be processed with household waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal center or the store where the product was purchased. Integrated Video Conference Terminal

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AFG6-UCS15

(1) DFS Device:

Master N/A Client with Radar detection capability Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) 2412-2462 5745-5825 5755-5795 5775-5775 5180-5240 5190-5230 5210-5210 5260-5320 5270-5310 5500-5700 5510-5670 Active Scanning

(the device can transmit a probe

(beacon)) Yes No Yes No Yes No Yes No Yes No Yes No Yes No No Yes No Yes No Yes No Yes passive scanning

(where the device is can listen only with no probes) No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes Ad Hoc Mode capability Access point capability Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No No No Yes No Yes No Yes No Yes No Yes No Yes No Yes No No Yes No Yes No Yes No Yes

(3) Country code selection ability Yes No If yes, please explain how it was implemented:

(4) Meets 15.202 requirement Yes No pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

Guangzhou Shirui Electronics Co., Ltd 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China Date: 2022-10-10 FCC ID: 2AFG6-UCS15 Model Number: UC S15, MS******(*=0-9,A-Z or blank), UC S******(*=0-9,A-Z or blank) To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Guangzhou Shirui Electronics Co., Ltd declare that this EUT (FCC ID: 2AFG6-UCS15) doesnt have Ad Hoc mode function on on-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name / Title: Sarah Sun / Regulatory Engineer Company: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China Phone: +86-13640798230 E-Mail: sunxueping@cvte.com