FCC ID: 2AFG6-NFC01 Module

Guangzhou Shirui Electronics Co.,Ltd. Confidentiality Level: Confidential SPECIFICATION MODEL : SRT.NFC.01 Sales Territory : Globe Product Type : Module Document Encoding : 22092738 Approved by Shikun Checked by HW Approved by DC Please send the original back to us after you have approved and signed. Approved by customer Comments Approved by Companys seal Customers Name:

CVTE REVISION HISTORY VERSION DATE BOARD ID PAGE DESCRIPTION AUTHOR V0 2022.09.27 SRT.NFC.01 B22291 All First Issued. Lucia CVTE Content 1. CRITICAL MATERIALS of TV Part ....................................................................................... 1 2. CONFIGURATION & GENERAL PRECAUTIONS .............................................................. 2 3. DESCRIPTION ......................................................................................................................... 2 4. MECHANICAL DIMENSION ................................................................................................. 3 5. Safety warning .......................................................................................................................... 4 6. Module integration instructions ................................................................................................ 8 CVTE SRT.NFC.01 1. CRITICAL MATERIALS of TV Part The table is for reference only, specific to prevail in kind. NAME TYPE BRAND BACKUP BACKUP Crystal,27.12MHz, 10ppm, 20pF,SMD3225,SMD, SPXO CF271200201723 Crystal,12MHz, 20ppm, 20pF,SMD3225,SMD, CF271200201723 JWT

JWT

QR-ZZPJ-017A 1 CVTE 2. CONFIGURATION & GENERAL PRECAUTIONS SRT.NFC.01 Relative humidity: 80%. Storage temperature: -10~60C. Operation temperature: 0~40C. 3. DESCRIPTION NFC is a near-field wireless communication technology that enables near-field communication, allowing the rapid exchange of a small amount of data between two objects. NFC mainly consists of three components: NFC sensor, NFC controller, and NFC protocol. The NFC sensor is used to detect the signal of another NFC device. When the NFC device is detected, it will pass the signal to the NFC controller, which will control the communication and data exchange of the NFC device and pass the data to the NFC protocol stack, which is responsible for processing and encrypting the data. Our NFC device mainly exists as a card reader, which recognizes external devices such as NFC cards and then performs some customized operations. QR-ZZPJ-017A 2 CVTE 4. MECHANICAL DIMENSION Ver. A0 SRT.NFC.01 CNT NOTE:

1.4.52mm QR-ZZPJ-017A 3 CVTE 5. Safety warning Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the SRSM.ENV_SENSOR.01 user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Non-modification Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. QR-ZZPJ-017A 4 CVTE SRSM.ENV_SENSOR.01 IC Radiation Exposure Statement for Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1.Lappareil ne doit pas produire de brouillage;

2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cet quipement est conforme aux limites d'exposition aux rayonnements ISED RSS-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2AFG6-NFC01 or Contains FCC ID: 2AFG6-NFC01. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. When the module is installed inside another device, the user manual of this device must contain below warning statements:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

QR-ZZPJ-017A 5 CVTE SRSM.ENV_SENSOR.01

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The final end product must be labelled in a visible area with the following:

The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labelled to display the Industry Canada certification number of the module, preceded by the words Contains transmitter module, or the word Contains, or similar wording expressing the same meaning, as follows:

Contains transmitter module IC: 22166-NFC01 The module must be installed in TB65GA, OTS-PCAP65V3T1, TB75GA, OTS-PCAP75V3T1, TB86GA, OTS-PCAP86V3T1. The end user manual shall include all required regulatory information/warning as show in this manual. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Summarize the specific operational use conditions This is a limited module, the module can be used in Interactive Intelligent Panel. The input voltage of the module is nominally 5V. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. This module is standalone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a standalone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. QR-ZZPJ-017A 6 CVTE SRSM.ENV_SENSOR.01 Le produit final doit tre tiquet dans une zone visible avec ce qui suit :

L'tiquette de certification Industrie Canada d'un module doit tre clairement visible en tout temps lorsqu'il est install dans l'appareil hte, sinon l'appareil hte doit tre tiquet pour afficher le numro de certification Industrie Canada du module, prcd des mots Contient un module metteur , ou le mot "Contient", ou une formulation similaire exprimant le mme sens, comme suit :

Contient le module metteur IC : 22166-NFC01 Le module doit tre install dans TB65GA, OTS-PCAP65V3T1, TB75GA, OTS-PCAP75V3T1, TB86GA, OTS-PCAP86V3T1. Le manuel de l'utilisateur final doit inclure toutes les informations/avertissements rglementaires requis, comme indiqu dans ce manuel. Informations manuelles l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir d'informations l'utilisateur final concernant la manire d'installer ou de retirer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations/avertissements rglementaires requis, comme indiqu dans ce manuel. Rsumer les conditions d'utilisation oprationnelles spcifiques Il s'agit d'un module limit, le module peut tre utilis dans Interactive Intelligent Panel. La tension d'entre du module est nominalement de 5V. L'intgrateur OEM doit tre conscient de ne pas fournir d'informations l'utilisateur final concernant la manire d'installer ou de retirer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Ce module est modulaire autonome. Si le produit final implique plusieurs conditions de transmission simultanes ou diffrentes conditions de fonctionnement pour un metteur modulaire autonome dans un hte, le fabricant de l'hte doit consulter le fabricant du module pour la mthode d'installation dans le systme final. QR-ZZPJ-017A 7 CVTE SRSM.ENV_SENSOR.01 6. Module integration instructions This module will be installed in the lower left corner of the back of the commercial display. The RFID reader is connected to the motherboard in the commercial display, and the motherboard module provides DC voltage power supply for the RFID reader. This device is only used for integration in the following cases:

(i)The module has a PCB antenna and must be installed at a distance of 20 cm between the antenna and the user;

(ii)This module shall not work with or share with any other similar or identical NFC module with antenna;

(iii)This module can only be used with commercial displays originally tested and included in certified models;

Changes or modifications made to the equipment without our express approval may invalidate the FCC/IC authorization. QR-ZZPJ-017A 8 CVTE

Interactive Intelligent Panel Model No.: TB65GA Supply source: 100-240V~ 50/60Hz 4.04 XXXXXXXXXXXXXK S/N:

Guangzhou Shirui Electronics Co.,Ltd Made in China CAUTION CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOTIN USE. DANGEROUS HIGH VOLTAGE INSIDE. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B) Contains FCC ID: 2AFG6-NFCO1 IC: 22166-NFCO1 UK cA

& Ce FE

Interactive Intelligent Panel Model No.: TB75GA Supply source: 100-240V~ 50/60Hz 4.5A XXXXXXXXXXXXXK S/N:

Guangzhou Shirui Electronics Co.,Ltd Made in China CAUTION CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOTIN USE. DANGEROUS HIGH VOLTAGE INSIDE. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B) Contains FCC ID: 2AFG6-NFCO1 IC: 22166-NFCO1 UK cA

& Ce FE

Interactive Intelligent Panel Model No.: TB86GA Supply source: 100-240V~ 50/60Hz 5.0A XXXXXXXXXXXXXK S/N:

Guangzhou Shirui Electronics Co.,Ltd Made in China CAUTION CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOTIN USE. DANGEROUS HIGH VOLTAGE INSIDE. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B) Contains FCC ID: 2AFG6-NFCO1 IC: 22166-NFCO1 UK cA

& Ce FE

3V3_STB_MCUg Ma PCB_Code

@ GN, . a, u4 Di2c: SDA | De = DET1 | y Tl @ os SWCLK1

for) Ds & usb DP@ SHUI! aN O >'@ @USB_DM SonoaR I2C_SCL_SENSOR_MCU Oo Oo

~ @ 126. SDA_SENSOR_MCU UP_TX1@ J M2

@ UP_RX1@ @ MCU_ GND1 7 MCU_INT3V3_OUT 4 2, 8-38 D4 IC:22166-NFC01 FCC ID:2AFG6-NFCO01

PREDIA Touch Flow Model No.: OTS-PCAP65V3T1 Supply source: 100-240V~ 50/60Hz 4.0A S/N:

OACTINM XXXXXXXXXXXXAXXXXXAXXRXXK, Cex Odin Groep B.V. Expolaan 50, 7556BE, Hengelo, the Netherlands Made in China b CAUTION i) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOTIN USE. DANGEROUS HIGH VOLTAGE INSIDE. CAN ICES-003(B)/NMB-003(B) Contains FCC ID: 2AFG6-NFCO1 Contains IC: 22166-NFC01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Type Approved Safety Regular Production Surveillance TOVRheinland CERTIFIED wowwrtuv.com 1D 2060000000

PREDIA Touch Flow Model No.: OTS-PCAP75V3T1 Supply source: 100-240V~ 50/60Hz 4.5A S/N:

OACTINM XXXXXXXXXXXXAXXXXXAXXRXXK, Cex Odin Groep B.V. Expolaan 50, 7556BE, Hengelo, the Netherlands Made in China b CAUTION i) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOTIN USE. DANGEROUS HIGH VOLTAGE INSIDE. CAN ICES-003(B)/NMB-003(B) Contains FCC ID: 2AFG6-NFCO1 Contains IC: 22166-NFC01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Type Approved Safety Regular Production Surveillance TOVRheinland CERTIFIED wowwrtuv.com 1D 2060000000

PREDIA Touch Flow Model No.: OTS-PCAP86V3T1 Supply source: 100-240V~ 50/60Hz 5.0A S/N:

OACTINM XXXXXXXXXXXXAXXXXXAXXRXXK, Cex Odin Groep B.V. Expolaan 50, 7556BE, Hengelo, the Netherlands Made in China b CAUTION i) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR SCREWS. NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: DISCONNECT ELECTRICAL POWER PLUG FROM WALL OUTLET WHEN NOTIN USE. DANGEROUS HIGH VOLTAGE INSIDE. CAN ICES-003(B)/NMB-003(B) Contains FCC ID: 2AFG6-NFCO1 Contains IC: 22166-NFC01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Type Approved Safety Regular Production Surveillance TOVRheinland CERTIFIED wowwrtuv.com 1D 2060000000

GuangzhouShiruiElectronicsCo.,Ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:05052023 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AFG6NFC01

[GuangzhouShiruiElectronicsCo.,Ltd](theapplicant)certifiesthattheequipmentforwhich authorizationissoughtisnotcoveredequipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Sincerely, SarahSun GuangzhouShiruiElectronicsCo.,Ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:05052023 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AFG6NFC01

[GuangzhouShiruiElectronicsCo.,Ltd](theapplicant)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofits subsidiariesoraffiliates)asanentityproducingcoveredequipment. Sincerely, SarahSun

Guangzhou Shirui Electronics Co., Ltd Date: 2023.02.27 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AFG6-NFC01 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description 4. Schematics 5. Block Diagram 6. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature Sarah Sun

Guangzhou Shirui Electronics Co., Ltd Declaration of Similarity We, the undersigning company Company Name: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, guangzhou conomic Technology Development District, Guangzhou, China Declare that:

Product description:Module Type designation: SRT.NFC.01 Trademark: N/A Hereby we confirm the below information. Host: Interactive Intelligent Panel(TB65GA, OTS-PCAP65V3T1 TB75GA, OTS-PCAP75V3T1, TB86GAOTS-PCAP86V3T1). The SRT.NFC.01 module will be placed inside TB65GA, OTS-PCAP65V3T1 TB75GA, OTS-PCAP75V3T1, TB86GA OTS-PCAP86V3T1. The Six Host differences are different in size and trademark. In this certification, TB65GA was selected as the test Host. on our behalf. Date:

2023-05-05 City:

Guangzhou Name:

Sarah Sun Function:

Regulatory Engineer Signature:

Guangzhou Shirui Electronics Co., Ltd Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: 2AFG6-NFC01 Items to be covered by Limited Single modular transmitters. 1. The modular transmitter must have its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). Answer from applicant No. Please refer to External Photos. YES, U5 PN7160 is used for the function. No, the modular does not have its own power supply regulation. YES, it is internal antenna. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, the module is tested in a stand-alone configuration as the test photos show. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). YES, please refer to the exhibition label sample for this module. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. there are very strict operational and 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. YES, please refer to the user manual. YES, RF exposure statement is attached in the user manual. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Host model: TB65GA, OTS-PCAP65V3T1TB75GA, OTS-PCAP75V3T1, TB86GAOTS-PCAP86V3T1 (Interactive Intelligent Panel) Host size: 65inches 75inches86inches Module installation location:

Name and surname of applicant (or authorized representative): Sarah Sun Date: 2023-05-05 Signature: ___________________________

Guangzhou Shirui Electronics Co., Ltd Declaration of Authorization We Name: Guangzhou Shirui Electronics Co., Ltd Address: 192 Kezhu Road, Scientech Park, guangzhou conomic Technology Development District, City: Guangzhou Country: China Declare that:

Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Module Type designation: SRT.NFC.01 Trademark: N/A FCC ID: 2AFG6-NFC01 on our behalf. Date: 2023-02-27 City: Guangzhou Name: Sarah Sun Function: Regulatory Engineer Signature: .

GuangzhouShiruiElectronicsCo.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-05-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AFG6-NFC01 Guangzhou Shirui Electronics Co., Ltd (the applicant) certifies that, as of the date of the filing of the application, TianHeng Consulting, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Guangzhou Shirui Electronics Co., Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. TianHeng Consulting, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Sincerely, Designated U.S. Agent Information:

Name: TianHeng Consulting, LLC FRN: 0033401258 Contact Person: Hualing Dong Address: 392 Andover Street, Wilmington, MA 01887, United States Tel.: +1 617-997-4010 Email: tianhengconsulting@gmail.com U.S. Agent Signature:

Applicant:

Company Name: Guangzhou Shirui Electronics Co., Ltd FRN: 0024773087 Grantee Code: 2AFG6 Contact Name: Sarah Sun Address: 192 Kezhu Road, Scientech Park, guangzhou Economic Technology Development District, Guangzhou, China Tel.: +86-13640798230 Email: sunxueping@cvte.com Applicant Signature:

Hualing Dong, President