FCC ID: 2AFG6-WL10A Sensor Box

Safety Warning Statement Before using and operating this device, please read thoroughly and comply with the following

(1) Intellectual property right statement: The hardware design and software of this product precautions in order to prevent accidents or inaccurate operations. are covered by the patents.Anyone who reproduces this product or the content of the DO NOT charge or use the device in dusty or wet conditions, to prevent internal circuit

(2) This manual is for reference only, and the actual function of the final product is subject to instruction without the authorization of the Company shall assume legal liabilities. the actual function of the product received by the customer. Placement failure. Keep the device away from heat sources such as an electric heater.

(3) The picture is for reference only, please refer to the actual product. The company Normal operating temperature is 0-40, normal operating humidity is 10%-90%RH. reserves the right to improve and change the appearance and design of the product without Children Safety notice. The product and accessories may contain some small-part. Please place them beyond the Sensor Box reach of children in avoidance of swallowing danger. Water Precaution Maintenance The product is not waterproof, please keep it dry. When the equipment is damaged, please do not disassemble it for repair without permission, please call customer service to report for repair. Please contact professional service personnel for maintenance services. DO NOT insert any sharp or pointed object into the device. Prevent the device from falls and collisions with other objects, which may cause damages. Sensor Box User Manual NoteAll the pictures in this manual are for reference only, subject to our available products. 1.Installation Procedure disconnected before installation. Warning: Please make sure the power cord of the Interactive Flat Panel (IFP) is 1) Position the Sensor Box to the bottom of the IFP in the direction of the arrow.

-- Consult the dealer or an experienced radio/TV technician for help. touch.com. 2) Lock the Sensor Box to the bottom of the IFP with screws. 3) Complete assembly. FCC FCC Radiation Exposure Statement Federal Communication Commission Interference Statement The equipment complies with FCC radiation exposure limits set forth for an uncontrolled This equipment has been tested and found to comply with the limits for a Class B digital environment. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and This device complies with Part 15 of the FCC rules. Operation is subjected to the following used in accordance with the instructions, may cause harmful interference to radio communi-

two conditions: (1) this device may not cause harmful interference, and (2) this device must cations. However, there is no guarantee that interference will not occur in a particular accept any interference received, including interference that may cause undesired operation. installation. If this equipment does cause harmful interference to radio or television reception, Changes or modifications not expressly approved by the party responsible for compliance which can be determined by turning the equipment off and on, the user is encouraged to try could void your authority to operate the equipment. to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

(1) This product can be used in Europe without restrictions.

-- Increase the separation between the equipment and receiver.

(2) Hereby, [Name of manufacturer] declares that the radio equipment type [designation of

-- Connect the equipment into an outlet on a circuit different from that to which the receiver type of radio equipment] is in compliance with Directive 2014/53/EU. The full text of the EU is connected. declaration of conformity is available at the following internet address: https://clever-

(3) Frequency Range:11.810-15.310MHz

(4) Max. transmitting power:25 dBA/m (for 3m distance)

REVISION V1.0 DESCRIPTION New DATE REVISED BY 2021/11/29 REVISIONS RECORD m m 5 3 Sensor Box WL10A Model No.:

Supply source :

Serial No.:

5V 300mA XXXXXXXXXXXXXXXXXXXXX Brand owner/Manufacturer: Guangzhou Shirui Electronics Co.,Ltd. Address: No.192, KeZhu Road, Science Park, Economic -Technological Development Area, Guangzhou,Guangdong,China FCC ID2AFG6-WL10A Manufacture date : 2020-XX MADE IN CHINA 2021102021-10 60 mm SN 1. 75#

2. 6035 mm 3. 4. 5. 6. RoHS 7. 6095%

24 TOLERANCE UNLESS OTHERWISE SPECIFIED GUANGZHOU SHIYUAN ELECTRONIC CO.,LTD.

=CRITICAL DIM DRAWING No. WL10A-G02-Q53403-V1.0 -

N/A N/A PART NAME MATERIAL SEEDRAWING MAT'L SEE NOTES:

TECHNOLOGY SEEDRAWING DRAWN CHK'D NOTES:

SCALE SIZE SHEET UNIT 1:1 N/A 1/1 mm APP'D

Location:

Guangzhou Shirui Electronics Co., Ltd 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China DATE : Jan. 20, 2022 Guangzhou Shirui Electronics Co., Ltd. 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China Attn: Director of Certification On our behalf, I appoint below company and person:

Authority to Act as Agent Name Position Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address Damon Hu Manager Tel / Fax E-Mail 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel: +86-0769-38826678-850 Damon_hu@dgddt.com to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. Applicant name Guangzhou Shirui Electronics Co., Ltd. Address 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China Yours sincerely, Signatory Sarah Sun Name Position Regulatory Engineer Company Name Guangzhou Shirui Electronics Co., Ltd. Address 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China

+86-13640798230 / +86-20-82086168 Tel / Fax E-Mail sunxueping@cvte.com

C5266091_X8_Ed.1 Letter of Authorization Guangzhou Shirui Electronics Co., Ltd. Company: Guangzhou Shirui Electronics Co., Ltd. Address: 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China Product Name: Sensor Box Model Number: WL10A, WL10B FCC Identifier: 2AFG6-WL10A We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Sarah Sun Date: 2022/01/20 Title: Regulatory Engineer Signature of applicant:

1/1

Guangzhou Shirui Electronics Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AFG6-WL10A To Whom It May Concern, C5266091_X10_Ed.1 Date: 2022/01/20 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. Above mentioned document contains detailed system and equipment description are the equipment. The public considered as proprietary information in operation of disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

1/1 Name: Sarah Sun Title: Regulatory Engineer

Guangzhou Shirui Electronics Co., Ltd Declaration of difference The difference between the two models is that the WL10A has one more power module in hardware and one more power socket in appearance than the WL10B. Other hardware and software parts are identical. Date: 2022/01/20 To Whom It May Concern:

The Product: Sensor Box Model No.: WL10A, WL10B Yours sincerely, Signatory Name Position Company Name Address Tel E-mail Sarah Sun Regulatory Engineer Guangzhou Shirui Electronics Co., Ltd 192 Kezhu Road, Scientech Park, Guangzhou, Economic Technology Development District, Guangzhou, China

+86-13640798230 sunxueping@cvte.com 1/1