FCC ID: 2AFG6-SI07A WiFi Module

All pictures in this manual are for reference only, the actual product shall prevail WiFi Module User Manual Table of Contents 1. Special Statement ......................................................................................................................... 1 2. Safety Warning ............................................................................................................................... 1 3. Federal Communication Commission Interference Statement ..................................... 2 4. FCC Caution ..................................................................................................................................... 3 5. Non-modification Statement ...................................................................................................3 6. IC Radiation Exposure Statement for Canada ..................................................................... 4 7. Declaration of Toxic and Hazardous Substances in Electronic Information Products ................................................................................................................................................ 6 8. Installation Steps ........................................................................................................................... 8 9. Software Settings .......................................................................................................................... 9 10. Key Specifications .................................................................................................................... 10 1. Special Statement Intellectual property statement: the hardware design and software programs of this product are copyright protected. Anyone copying the contents of this product and instructions without the authorization of this company will bear the corresponding legal responsibilities. This manual is for reference only. The actual final functions are subject to the actual ordering of the customer and the actual functions of the product received. The pictures are for reference only, please refer to the actual product. The company reserves the right to make improvements on and changes to the product appearance and design without prior notice. 2. Safety Warning Before operating this equipment, please read and observe the following precautions carefully to prevent improper operation. Do not use the device in dusty and humid places to avoid causing internal circuit failures. Do not place the device near heating objects such as electric heaters. This device and accessories may contain some small parts, please keep them out of the reach of children to avoid danger. The device is not waterproof, please keep it dry. 1 The working temperature of this equipment is 0~40, and the working Please contact professional maintenance personnel for all maintenance humidity is 10~90%RH. services. Do not insert any sharp objects into the device. Do not drop or hit the device to avoid damage to the device. 3. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 2 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 4. FCC Caution following two conditions:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. 3 5. IC Radiation Exposure Statement for Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1.Lappareil ne doit pas produire de brouillage;

2.Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil ettoutes les personnes. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems 4 Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Hereby, Guangzhou Shirui Electronics Co., Ltd. declares that the radio equipment type SI06 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.seewo.com. This symbol, affixed to the product or its packaging, indicates that the product must not be processed with househlod waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal centre or the store where the product was purchased. 5 6. Declaration of Toxic and Hazardous Substances in Electronic Information Products Toxic and harmful substances or elements Part Name Metal shell Circuit board Wire Structure Pb Hg Cd Cr(VI) PBB PBDE Indicates that the content of the toxic and hazardous substance in all homogeneous materials of the part is within the limit requirement of GB/T 26572. Indicates that the content of the toxic and hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement of GB/T 26572. Note1.All parts marked with "" in the table are in compliance with the EU RoHS directive 2.Circuit board components: including printed circuit boards and their parts, electronic components, solder joints, etc.;

3.Depending on the product model, the product you purchased may not contain all the above components;

4.The environmental protection use period of this product is 10 years, some detachable parts have different environmental protection use periods, and these 6 environmental protection use periods are separately attached to the corresponding parts;

product description. 5.The environmental protection use period of the product/component only applies to the use of the product/component under the conditions specified in the 7 7. Installation Steps before installation. be keep. WarningBe sure to disconnect the power cord of the conference panel 1) Removal wireless model board of the conference panel bottom,screw should 2) Insert the wireless module fully into the slot at the bottom of the conference panel. 8 3) After installing the wireless module, attach the screws to both sides of the wireless module. NoteThis wireless module must be inserted into the upper slot to work for the conference panel. 8. Software Settings After the installation is completed, turn on the conference panel and the wireless module will run automatically. 1) Click on the sidebar menu " Settings". 2) Set the menu to select the"Network"- "Wireless Hotspot" menu. 3) Click on icon, can turn on/off the wireless hotspot function. 9 NotePlease refer to the rear nameplate for the model approval code identification 9. Key Specifications 1Wi-Fi Wi-Fi Operating Mode: AP+STA Wi-Fi Support Version: 802.11 a/b/g/n/ac Wi-Fi Working Frequency: 2.4G&5G Wi-Fi Working Distance: 0~12 Meters 2Bluetooth Bluetooth Support Version4.2 Bluetooth Working Frequency2.4GHz Bluetooth Working Distance0~10 Meters of this equipment. 10

REVISION V1.0 DESCRIPTION NEW DATE REVISED BY 2020-12-10 REVISIONS RECORD 65.0mm R1.0mm FCC ID:2AFG6-SI07A IC:22166-SI07A CAN ICES-3(B)/NMB-3(B) CMIIT ID:XXXXXXXXXX WiFi Module/

Model No./ : SI07A S/N:

XXXXXXXXXXXXXXXX

Manufacturer:Guangzhou Shirui Electronics Co.,Ltd Made in China

. 2 0 0 m m

Guangzhou Shirui Electronics Co., Ltd Date: 2020/12/4 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) f) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

g) h) i) j) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: Guangzhou Shirui Electronics Co., Ltd Contact Name: Sarah Sun Title of Person: Regulatory Engineer Address: 192 Kezhu Road, Scientech Park, guangzhou Economic Technology Development District Guangzhou China

Guangzhou Shirui Electronics Co., Ltd Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AFG6-SI07A To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation BOM list Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Guangzhou Shirui Electronics Co., Ltd Contact Name: Sarah Sun Title of Person: Regulatory Engineer Address: 192 Kezhu Road, Scientech Park, guangzhou Economic Technology Development District Guangzhou China Date:2021/1/11