CAR A/V ENTERTAINMENT SYSTEM Before using this product, please read the manual carefully and keeping for safely. CONTENTS Source display DVD operation Radio operation DVB-T operation (optional) Caution: For safety using this product, please read this manual, due to technical improvements to the design specifications and change, without notice. Not Read Disc SPECIFICATIONS CONTENTS TV operation (optional) USB and SD card operation Menu Setting NAVI and IPOD operation Bluetooth operation AUX input and Bluetooth operation Main Unit Power Supply DC12V(11V-16V) Current consumption <15A Stand-by current Operational temperature range
-20 C~+70 C
<10mA Audio Section Rated output 45W x 5ch Maximum power output:45Wx5ch Compatible speaker impedance:4 Line output voltage:2Vrms DVD player section D/A conversion:24 bits Frequency response:
20Hz~20KHz 3dB Total harmonic distortion:0.05%(1KHz) Signal to noise ratio: 75dB Dynamic range: 75dB
DVD disc content format(CD VCD SVCD JPG DVD MP4 MPEG DIVX...) DVD disc audio format(AG-3 5.1 WMA MP3 ADPCM MPEG1/2Audio) Sampling frequency: 44.1KHz 48KHz 96KHz Input way: YUV Resolution: 720 x 480 AV Inputs/Outputs Video------- 1Vp-p(75 ) Audio------- 500mVrms NAVI R.G.B inputs ------- 0.7Vp-p(75 ) Sync inputs-------- 5Vp-p Audio inputs --------500mVrms(MAX) Resolution: 800 x 480 FM Stereo Radio Section U.S. Standard:: 87.5-107.9MHz Outside U.S.:87.5-108MHz Usable sensitivity:10dB (S/N=30dB) Stereo separation:30dB S/N ratio(S/N):>50dB AM Section Frequency Range U.S. standard:530-1710kHz Outside U.S. :531-1629kHz Usable Sensitivity 33dB (S/N=20dB) Image rejection ratio >50dB USB/SD card support memory card with content format:
JPG.MP4.MPEC.DIVX.MP3. USB1.1/USB2.0 port do not support movable hard disk. Bluetooth specs. 1)wireless menu: Bluetooth 1.2 version is original version. 2)Support Bluetooth Mode:HFP1.0,HSP,A2DP 1.0,AVRCP1.0 3)Frequency:Open 2.4G,1SM frequency 4)Effective range(open environment):at least 10 M away (30ft) 5)Sensitivity of Receiver:<-84 dBm at le-3 BER 6)Fitting Name: SUM-BMA19 7)Fitting Password:1234 Car Camera installation guide Camera Video extension line (3m) Camera supply cable 1.Connect supply terminals of Car camera and reversing light on back and pay attention to: (red line is connected positive line) 2.Be connected the other end (black plug) to supply connecting pin (red) of Car camera after good power connection. 3.Then packing with isolating tape . 4.Be connected 3m video extension line to video connecting pin of camera. 5.Then packing with isolating tape . 6.Be connected the other end of 3m extension line to video input terminals of the host back. (with marked: CAMERA IN) and then use isolating tape to pack. 1 W I R I N G D I A G R A M SAFETY CAUTION To avoid causing damage to user and others or property loss ,now please be noted as following :
Such mark content indicate the forbidden item which is not allowed. Such mark content indicate the forced item which must be performed. Please ask the special technician for this unit to install and match wire for special technician and experience, please be accredited to sales agent to install and match wire to ensure safety . G F E D C B A Power wire output terminal Power wire output terminal
Driver is not allowed to operate unit and watch picture when he is driving. Can not use unsafe part to mount and connect to ground. If meet with thunder , Ensure not to touch antenna or anywhere plug , which may lead to touch electricity dangerous. Don't damage wire, wire damage may cause broken wire or short circuit which lead to fire and accident. Don't use the unit at location where there is much rain water damp or dust. Don't put hand to insert moving parts which may jam finger and hurt. IF the wasted battery need to be disused please deal with them to follow your rules where you live. The unit is applied to car with DC 12V cathode ground. It can not be used in car with DC24V(such as large type truck and low temperature diesel oil engine) which may cause fire and trouble. Ensure to use the fuse with specified capacity and replace fuse by special technician , not to operate by hand. Must take off car storage battery cathode wire during this case, it may cause touch electric-shock dangerous or hurt due to short circuit. For safety, it must be used with handed brake connection wire if it is not followed the correct notes for installation matching wire, the unit can not be operated normally, it may lead to traffic accident. The antenna must be firmly installed without falling, if there is no sufficient stick for mounting part it will be fallen during travelling the course of travelling, it's better to check it frequently. The specified method must be followed to install and match wire , Otherwise it may cause fire and trouble. GLOSSARY
Language OSD Language
:English Video Subtitle Audio DVD Menu Audio Misc Exit Setup
:English
:English
:English Language Aspect Ratio
:4:3 View Mode
:Auto fit Video Audio Misc Exit Setup Language 5.1CH
:Off Video Audio Misc Exit Setup Language Use Default Settings Screen Safer Memory Play
:On
:Off Video Audio Misc Exit Setup Remote Control Instruction Power key 1 Mute/Eject key 2 Open/Close key 4 Scan/Auto.M/Search key 6 AUX source key 9 Radio/TV Band key 11 SYS/Setup key 12 NAVI source key 15 DVD Setup key 16 STEP/SLOW key RANDOM key 19 20 Number keys 29 EJECT PWR MUTE OP/CL A.M. SCAN GO TO PRE-
PRE+
ENTER AUX CONT SEEK-
AUX ZM IN BAND LCD SETUP EXIT RADIO TV SYS SETUP CLEAR SEEK+
ZM OUT MENU LIGHT EPG TP.AS/TA FAV TP TEXT RDS NAVI DVD SETUP DIGEST TITLE PTY2 A-B REPEAT LANG PTY+
PBC SUB.TI POSI.S Pg Up PTY -
3 DEF F2 6 MNO ZOOM Pg Dn AF ANGLE PAUSE RECALL PTY1 PROG RANDOM POSI 2 ABC F1 5 JKL STEP SLOW DEST 1 DAY/NIGHT 4 GHI F3 7 PQRS MAIN.S NAVI.S SYSTEM 8 TUV 9 WXYZ N/P R/L List key 26 LIST LOUD 10+RTN INFO MODE R/L 0 AUDIO DISP Car AV System 4 3 Volume keys 5 Skip M.SCAN keys 7 8 Enter key 4-way control keys 10 14 13 18 17 22 21 23 24 Seek/Fast Playback key Play/Pause key Stop/Clear key Title key Digest key Subtitle key Repeat key Zoom key Angle key 25 TV system key 27 28 Audio key Display/Mode key
(4:3/16:9) BASIC INTRODUCE Set Hour of Clock - +
Set Minute of Clock - +
MENU SETTING System setting interface BASIC OPERATION DIMMER HIGH BASIC OPERATION USB Operation SD Card Operation