FCC ID: 2BAMH-SV200 2.0 Soundbar System

2.0 Sound Bar User ManualModel: SV200M-0805Please read this guide before using the product. ENG - ii Accessibility Contact VIZIO for accessibility support at:

Email: accessibility@vizio.com Phone: 1-877-698-4746 Binding Arbitration Agreement and Class Action Waiver This purchase is subject to full VIZIO Terms and Conditions, including Binding Arbitration Agreement and Class Action Waiver, which may be viewed at vizio.com/en/terms/terms-of-service. By using this device, you accept those Terms and Conditions. You have the right to opt out of the Binding Arbitration Agreement and Class Action Waiver within 60 calendar days of your purchase. Please refer to the Limited Warranty section of this User Manual or view the full VIZIO Terms and Conditions for opt-out instructions. ENG - iii IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. Heed all warnings. Follow all instructions. Do not use this Unit near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other Unit (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the ends where the plug is located, near convenience receptacles, or where they exit from the Unit. Only use attachments/accessories specified by the manufacturer. Use only with the stand, tripod, or bracket specified by the manufacturer, or sold with the Unit. When a cart is used, use caution when moving the cart/Unit combination to avoid injury from tip-over. Unplug this Unit during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the Unit has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Unit, the Unit has been exposed to rain or moisture, does not operate normally, or has been dropped. To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit. Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners. Always use the accessories recommended by the manufacturer to ensure compatibility. When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage. Slots and openings in the back and bottom of the Unit are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided. Never push any object into the slots and openings on your Unit. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit. Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation. WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort. When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord. Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be located near your Unit and be easily accessible. Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. ENG - iv IMPORTANT SAFETY INSTRUCTIONS Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Unit yourself. Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock. Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock. Ensure that the power cord and any other cables are unplugged before moving your Unit. When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time, unplug the power cord. To reduce risk of electric shock, do not touch the connector with wet hands. Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator. Read and follow all warnings printed on the Unit. WARNING: This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture. If the main wall plug or the appliance coupler is disconnected, the disconnected device will remain readily operable upon reconnection to an appropriate power source. CAUTION: Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type. Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire. No open flames, such as lighted candles, should be placed on the Unit. The ventilation should not be impeded by covering the ventilation openings with items,such as newspapers, table-cloths, curtains, etc. The equipment shall be used at maximum 35 degree C ambient temperature. WARNING: To reduce the risk of fire or electric shock, do not expose this Unit to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the appliance that may be sufficient magnitude to constitute a risk of shock to persons. The an exclamation point within equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Warning: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. ENG - v TABLE OF CONTENTS Package Contents ...................................................................................................................................... 1 Controls & Connections ............................................................................................................................ 2 Using the Mobile App or On-screen Menu ............................................................................................... 8 Proper Placement ...................................................................................................................................... 9 Mode & Level Settings ............................................................................................................................... 10 Using Button Combinations ...................................................................................................................... 12 Programming the Sound Bar .................................................................................................................... 13 Bluetooth Pairing ....................................................................................................................................... 14 Using Bluetooth Mode ............................................................................................................................... 15 Product Registration and Support ........................................................................................................... 21 Help & Troubleshooting ............................................................................................................................. 22 Limited Warranty ....................................................................................................................................... 23 Legal & Compliance ................................................................................................................................... 26 Specifications ............................................................................................................................................ 27 ENG - vi Package Contents VIZIO Sound Bar Power Cable 2 x QuickFit Screws Quick Setup Guide Get easy setup videos and more. Scan with your phone camera or QR reader. Connect. Plug in the power cable to power on your sound bar. 1 vizio.com/qr/V20xt-K6 HOME THEATER DISPLAY | QUICK START GUIDE Installation Guide | Models:

Digital Optical Out Digital Optical 2 Then use the included digital optical cable to connect to your TV. Unlock the best picture and audio quality with a VIZIO SmartCast TV. Scan here to shop our V-series TVs:

More questions?

Get customer support help and view the User Manual here:

support.vizio.com HDMI Cable Quick Setup Guide ENG - 1 Controls & Connections Back of Sound Bar Back of Sound Bar Power Port

*You can also use this port to connect a Voice Assistant device. See Connecting to a Voice Assistant on page 16 for more information. ENG - 2 Controls & Connections USB** In

**Supports .WAV and .MP3 file format playback only. ENG - 3 Controls & Connections Side of Sound Bar Power Press to turn on or off. Input Press to change the audio source. Bluetooth Input Hold to pair.

(See Bluetooth Pairing for more information.) ENG - 4 Volume Increase or decrease the loudness of the audio. 1 Choose the best possible connection cable type and connect it to your TV.*

Back of Sound Bar First-time Setup HOME THEATER DISPLAY | QUICK START GUIDE Installation Guide | Models:

Be sure the TV port is an audio output, not an audio input.

*Not all TVs have the audio outputs shown. To connect the soundbar directly to your other devices (Blu-ray player, game system, etc.) see your devices user manual. BEST HDMI Cable ENG - 5 HOME THEATER DISPLAY | QUICK START GUIDE Installation Guide | Models:

First-time Setup 2 Connect the power cable to the soundbar AC IN as shown. Plug the power cable into an electrical outlet. Back of Sound Bar ENG - 6 6 8 First-time Setup ENG - 7 Using the Mobile App or On-screen Menu ENG - 8 Proper Placement For the best sound experience, position the soundbar as shown. The soundbar should be close to ear level. Soundbar is centered below the TV. ENG - 9 Using Button Combinations There are other functions that are triggered by different button combinations on the soundbar. Function Factory Reset Buttons are located here. Description Reset the soundbar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth(

) and Volume Down () buttons for 5 seconds. Note: This will erase all settings and preferences that you have set. Eco Power Mode When the Eco Power mode setting is enabled, the soundbar will automatically power down after a period of inactivity. When disabled, the soundbar will remain powered on until you turn it off. To enable/disable this function, Press and Hold the Power (

) and Volume Down () buttons for 5 seconds. Note: Eco Power Mode setting is OFF by default. Speaker Test Press and Hold the Bluetooth( ) and Volume Up (+) buttons for 5 seconds. A voice will begin calling out each speaker beginning with left (Left and Right). If any of these are missing, check the connection and run the speaker test function again. ENG - 10 Programming the Sound Bar ENG - 11 Bluetooth Pairing To pair the soundbar with a Bluetooth device:

1. Press and hold the Bluetooth button on the soundbar or remote control for three (3) seconds. 2. Search for the soundbar (SV200M) using your Bluetooth device. For more information, refer to the user documentation that came with the device. 3. Now you can play audio from your Bluetooth device. Volume can be controlled on both your source device and the soundbar. Bluetooth Device Button Located on the side of Sound Bar The LED indicators on the display panel on the front of the soundbar will light up sequentially from bottom to top and back again. Once the device is paired, the LED indicators will stop flashing. ENG - 12 Using Bluetooth Mode 1. Your soundbar supports music streaming from devices with Bluetooth capability.

(Device compatibility will vary, see your devices documentation for more information.) 2. Once you have paired your source device to the soundbar your device should remain paired (within range). 3. If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically. 4. If the input is changed, the Bluetooth device will disconnect (will stay connected if Auto VA BT is on). Maximizing Signal A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection. Try the following if your sound quality is less than optimal:

If you hear any break-up or disconnect while streaming music from your device, move the source device closer to the soundbar. Be sure that there are no solid obstructions in the line-of-sight between the soundbar and the source device. Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range. Your soundbar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone. Reduce the volume levels on your device and on the soundbar before pressing Play. High volume levels can damage your hearing. ENG - 13 Wall Mounting 1 2 Place the included Wall Mounting Template against the wall under your TV. Mark the two bracket holes using a pencil. 729999-000558 Install the screws to the wall. Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls). Suggested screw size:

4.5mm diameter 25 mm minimum length Screws for wall mounting are not included. Use the screw type and length noted above and on the Wall Mounting Template and appropriate to your homes construction. If in doubt, consult a professional installer. ENG - 14

* Do not use any of the included screws for the wall mount installation. These are not intended for mounting. 3 3 Attach one end of the provided HDMI cable to the HDMI eARC port on your soundbar. Attach the other end to your TVs ARC/eARC port.Slide the wall mount slots on the rear of the Wall Mounting Slide the soundbars wall mount slots over the installed screws. Wall Mount Slots 729999-000558 ENG - 15 QuickFit Mounting Your soundbar may be attached directly to the bottom of QuickFit compatible VIZIO TVs. For additional information and VIZIO TV compatibility, visit www.vizio.com/quickfit. Before you begin 58 (0.625) Before you begin, please ensure that your TV wall mount provides at least 58 (0.625) of clearance between the back of your TV and the wall. 1 Locate the thumb screws inside the included accessory bag and screw them into the bottom of your QuickFit compatible VIZIO TV. 2 Rotate the soundbar so that it is upside down with the orange tab on the left. C R A e TV TO TV HDMI OUT

(eARC) To detatch your soundbar 3 Plug the power cable into a nearby wall outlet and connect the soundbar to the HDMI eARC port on your QuickFit compatible VIZIO TV. ENG - 16 4 Align the soundbar with the thumb screws inserted into your TV as illustrated in step 2. Push the soundbar in until it locks in place. To detatch the soundbar, hold it from the bottom and push up to release, then pull it away from your TV. Product Registration and Support Register your soundbar. Scan with your phone camera or QR reader. Customized Support Get assistance quickly with your information on hand. News and Offers Take advantage of the latest news and special offers from VIZIO. Updates and Enhancements Stay up-to-date with important product updates and notifications. More questions? Find answers at:

SUPPORT.VIZIO.COM ENG - 17 Help & Troubleshooting There is no power. Ensure the power cord is securely connected. Press the POWER button on the remote control or on the top of your soundbar. Plug a different device into the electrical outlet to verify that the outlet is working correctly. Increase the volume. Press VOLUME UP on the remote control or on the top of your soundbar. Press MUTE on the remote to ensure the soundbar is not muted. Press INPUT on the remote or on the top of your soundbar to select a different input source. There is no sound. When using the Digital Optical input, if there is no audio: (A) try setting the TV output to PCM or (B) connect directly to your Blu-ray/other source, some TVs do not pass through digital audio. On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM. Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TVs user manual for more detailed information. If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. I hear buzzing or humming. The remote isnt working. ENG - 18 Ensure all cables and wires are securely connected. Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device. Connect your device to a different input on the soundbar. Replace the remote batteries with new ones. Point the remote directly at the center of the soundbar when pressing a button. If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. Limited Warranty UNITED STATES By using this VIZIO product, you accept all VIZIO Terms and Conditions, including all the Terms of Warranty, BINDING ARBITRATION AGREEMENT, and Class Action Waiver. If you do not agree to the terms of this warranty, do not use the VIZIO product and, within thirty (30) days of the date of purchase, return it for a refund to the authorized retailer where you purchased it. You have the right to opt out of the Arbitration Agreement and Class Action Waiver within 60 calendar days of your purchase. Please refer to the full section Binding Arbitration Agreement; Class Action Waiver below for more details and instructions for opt-out. Full Terms and Conditions may be viewed at vizio.com/en/terms/terms-of-service. How Long This Warranty Lasts For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase. What This Warranty Covers VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIOs user guides and manuals. Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico). The product must also be located in the country where it was purchased at the time of warranty service. How to Get Service Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Customer Support by going to support.vizio.com and selecting Contact Us. You can also call Customer Support (US): 855-209-4106. Your Obligations Before Service You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer. VIZIOs Responsibilities If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIOs option and sole discretion. Replacement parts and VIZIOs labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer. Types of Service Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. ENG - 19 Limited Warranty What This Warranty Does Not Cover This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues;

(f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold AS IS, CLEARANCE, FACTORY RECERTIFIED, or by a non-authorized reseller. What to Do If You Are Not Satisfied With Service If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator. Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCTS SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award pUnitive or other damages not measured by the prevailing partys actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY. NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING. ENG - 20 Limited Warranty Opt-Out Instructions IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty

(60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and

(3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section titled Binding Arbitration Agreement; Class Action Waiver (U.S. Residents) will not apply. Exclusions and Limitations TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIOS NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. How the Law Applies This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law. General No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the entire section titled Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) will not apply. This warranty applies to the maximum extent not prohibited by law. Changes to Warranty This warranty may change without notice, but any change will not affect your original warranty. Check www.vizio.com for the most current version. ENG - 21 Legal & Compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice:

1. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. FCC RF Radiation Exposure Statement 1. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 3. FCC RF Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Battery Disposal and Recycling You must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/ or a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit vizio.com/environment or call (800) 374-3473.. Software Licenses All software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other applicable terms of use. By using the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be updated from time to time and are available to view at vizio.com/terms and vizio.com/privacy, respectively. Export Regulations Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (US). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received. 2023 VIZIO, Inc. All Rights Reserved. This User Manual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. To review the most updated version of this User Manual and the associated Quick Start Setup guide, go to vizio.com. VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc. ENG - 22 Legal & Compliance Specifications Sound Bar:

One 1.67" x 2.77" (42.3 x 70.3 mm) Full Range Driver for each channel (1 for left, 1 for right, ) HDMI (eARC) Connections:

Bluetooth One USB (Supports .WAV and .MP3 format only) Sound Pressure Level* (System):

93 dB Frequency Response (System):

70 Hz - 20 KHz Voltage:

100-240Vac, 50/60Hz Compliances:

cTUVus/FCC Class B/CEC

*Sound pressure level measured using pink noise at 1 meter, c-weighted. ENG - 23 The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VIZIO Inc. is under license. Other trademarks and trade names are those of their respective owners. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, TruVolume, Virtual:X, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. 2021 DTS, Inc. ALL RIGHTS RESERVED. ENG - 24 2023 VIZIO INC. ALL RIGHTS RESERVED. 231231BT ENG - 25

DATE:2023/1/2 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint BlueAsia of Technical Services(Shenzhen) Co.,Ltd And Building C, No. 107, Shihuan Road, Shiyan Sub-District, Baoan District, Shenzhen,

(Name of Agent company name and address) to act as our Guangdong Province, China I certify that this application for equipment certification. in the preparation of agent submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with GUANGZHOU YIZHI ELECTRONICS CO.,LTD.And ROOM 401,BUILDING 8,NO.481,TAINAN ROAD,NANSHA DISTRICT,GUANGZHOU CITY, GUANGDONG PROVINCE(Applicant Name and address)

<Signature>

NameEric Liu TitleCertification Supervisor CompanyGUANGZHOU YIZHI ELECTRONICS CO.,LTD.

DATE2024.1.2 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BAMH-SV200 Product Name: 2.0 Soundbar System Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameEric Liu TitleCertification Supervisor CompanyGUANGZHOU YIZHI ELECTRONICS CO.,LTD.

GUANGZHOU YIZHI ELECTRONICS CO.,LTD.

(date)2024/1/2 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCCID:2BAMH-SV200)

[GUANGZHOU YIZHI ELECTRONICS CO.,LTD.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

<Signature>

NameEric Liu TitleCertification Supervisor CompanyGUANGZHOU YIZHI ELECTRONICS CO.,LTD. GUANGZHOU YIZHI ELECTRONICS CO.,LTD.

(date)2024/1/2 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCCID:2BAMH-SV200)

[GUANGZHOU YIZHI ELECTRONICS CO.,LTD.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

<Signature>

NameEric Liu TitleCertification Supervisor CompanyGUANGZHOU YIZHI ELECTRONICS CO.,LTD.

US AGENT LETTER OF ATTESTATION US Agent:

Company Name: Vtrek Inc. Contact Name: Ronnie Wong Address:4200 Chino Hills Parkway,Ste.145-145 City/Province/Zip:Chino Hills,California 91709-3782 Telephone No: +1 (949) 572-3099 Email:ronniewong@yizhitech.net FRN: 0034753863 TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 This letter is to confirm that we have accepted the responsibility to act as US agent representative on behalf of the (GUANGZHOU YIZHI ELECTRONICS CO.,LTD. noted below for all future FCC certification/registrations obtained during the period of this agreement, which ends at the specified date below. As per US agent, we are aware of the requirements involved as outlined in FCC Equipment Authorization Program in their Report and Order FCC 22-84 and the clause 2.911 Application requirements. Applicant Company name:GUANGZHOU YIZHI ELECTRONICS CO.,LTD. FRN: 0033559568 FCC ID: 2BAMH-SV200 Contact Name: Eric Liu Address:ROOM 401,BUILDING 8,NO.481,TAINAN ROAD,NANSHA DISTRICT,GUANGZHOU CITY, GUANGDONG PROVINCE Telephone No: 020-39009921 Email: lxf@yizhitech.net The Applicant acknowledge the acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Date: 2024.1.15 Applicant Contact Name:Eric Liu Title: Certified Engineer Signature US Agent Contact Name: Ronnie Wong Title:CEO Signature 1/1