1E0671-1 MCR2.9 1E0671 LCM User Manual Version 1.00 29.4.2015 HABERL ELECTRONIC Kochstrae 2 94424 Arnstorf
+49 8723 9622-0 info@haberl-electronic.de Artikel: 1E0671-1 Bezeichnung: MCR 2.9 Inhalt User Manual Seite 1 von 9 Introduction ................................................................................................................................................3 Specifications .............................................................................................................................................4 General Specifications ..........................................................................................................................4 RFID Specifications: ...............................................................................................................................4 Pin Assigment .........................................................................................................................................5 FCC Compliance .........................................................................................................................................6 Precautions of Use ....................................................................................................................................7 Technical Assistance .................................................................................................................................8 Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 User Manual Seite 2 von 9 This document and its contents are proprietary to haberl electronic GmbH & Co. KG and are intended solely for the contractual use of its customer in connection with the use of the product(s) described herein and for no other purpose. This document and its contents shall not be used or distributed for any other purpose and/or otherwise communicated, disclosed, or reproduced in any way whatsoever without the prior written consent of haberl electronic. The instructions in this document must be strictly and explicitly followed by qualified and properly trained personnel in order to ensure the proper and safe use of the product(s) described herein. All of the contents of this document must be fully read and understood prior to using such product(s). FAILURE TO COMPLETELY READ AND EXPLICITLY FOLLOW ALL OF THE INSTRUCTIONS CONTAINED HEREIN MAY RESULT IN DAMAGE TO THE PRODUCT(S), INJURY TO PERSONS, INCLUDING TO USERS OR OTHERS, AND DAMAGE TO OTHER PROPERTY. HABERL ELECTRONIC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE IMPROPER USE OF THE PRODUCT(S) DESCRIBED HEREIN (INCLUDING PARTS THEREOF OR SOFTWARE) OR ANY USE OF SUCH PRODUCT(S) OUTSIDE THE SCOPE OF THE EXPRESS WRITTEN LICENSES OR PERMISSIONS GRANTED BY HABERL ELECTRONIC IN CONNECTION WITH CUSTOMERS ACQUISITION OF SUCH PRODUCT(S). 20153 haberl electronic GmbH & Co. KG , All rights reserved. Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 User Manual Seite 3 von 9 Introduction The MCR2.9 and the LCM is a compact module designed for use with the Carsharing System of BMW vehicles. It will be used for short range reading of high and low frequency (HF and LF) tags to identify the Carsharing user. Another function of the reader is, when the car is not used, that the mounted LEDs shows the status of the car (booked, available). The module consists of a radio module and a printed loop antenna and a coil for both RFID-
frequencies, an LIN and CAN interface, IR-proximity sensor for wakeup, a microcontroller as host processor and the LEDs as indicator of the vehicle condition There are 2 versions 1E0671:
LCM with a can interface (LIN is not connected to the cable) 1E0671-1:
MCR2.9 with a LIN interface (CAN is not connected to the cable) Figure 1 - front view MCR 2.9 Figure 2 back view MCR2.9 Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 User Manual Seite 4 von 9 Specifications General Specifications Height:
Diameter:
Weight:
Electrical rating:
19mm 78mm 61g Input Voltage: 9-18V DC Input Current: 120mA Operating temperature:
-40C to +85C Storage temperature:
-30C to +70C Relative Humidity:
Host Interface:
RFID Specifications:
Frequency range:
Protocols supported:
5% to 95% non-condensing LIN, High Speed CAN 125 KHz and 13,56 MHz 125 KHz:
HITAG 1,2,S 13,56 MHz:
Legic,ISO14443 A/B, Sony Felica, HID, ISO15693 Read range1 (typical maximum) 125 KHz:
13,56 MHz:
up to 70mm up to 80mm 1 Read and write range varies based on tag performance and environmental conditions. Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 Pin Assigment User Manual Seite 5 von 9 1E0671-1 MCR2.9 with LIN Interface PIN Description 1 2 3 4 GND LIN-Bus Vbat_out Vbat_in 1E0671 MCR2.9 with CAN Interface = LCM PIN Description GND Vbat not connected not connected CAN-H CAN L 1 2 3 4 5 6 Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 User Manual Seite 6 von 9 FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Device Labeling:
The Label contains FCC ID: 2AELV-1E0671-1 Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 User Manual Seite 7 von 9 Precautions of Use Avoid using the RFID Reader in the presence of strong electomagnetic waves. The RFID Reader supplies power to the card or tag using an electromagnetic wave to communicate with the card or tag. The presence of strong electromagnetic waves affects communication between the RFID Reader and card or tag, causing reduced access area or inability to access the card. Test the RFID Reader using the actual power source in the installation location environment before use. Keep precision devices that might be affected by electromagnetic waves away from the RFID Reader. Because the RFID Reader constantly emits an electromagnetic wave of about 125 KHz and 13.56 MHz, placing precision devices that might be affected by electromagnetic waves near the reader can cause malfunction or failure of the devices. When operating the reader, keep precision devices away from the RFID Reader. If such precision devices must be located near the RFID Reader, shield the precision devices with a metal cover and test the devices to check for any influence. Avoid using multiple RFID Readers in proximity to each other. The RFID Reader supplies power to the card or tag using an electromagnetic wave to communicate with the card or tag and constantly emits an electromagnetic wave of about 125 KHz and 13.56 MHz. Using multiple readers in proximity to each other causes interference, interrupts communication between the card and reader, and prevents access to the card. Safety Information To maintain compliance with the FCC RF exposure guidelines, install and operate this equipment with a minimum distance of 20 cm between the radiator and your body. Use only with the supplied antenna. Unauthorized antenna, modification, or attachments can damage the transmitter and violate FCC regulations. Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-
Artikel: 1E0671-1 Bezeichnung: MCR 2.9 User Manual Seite 8 von 9 Technical Assistance Haberl electronic general contact information:
Haberl electronic GmbH & Co. KG Kochstrasse 2 D-94424 Arnstorf Tel. +49-8723-9622-0 Fax: +49-8723-9622-33 Email: info@haberl-electronic.de Druckdatum: 06.05.15 Erstelldatum:
Ersteller :
Version:
1E0671-1 MCR2.9 user manual Doku Nr.: 3D032-