U802T Users Manual Contents 1. 2. 3. 4. 5. 6. 7. 8. Installation Windows Vista --------------- 2 UI Features Introduction -------------------- 9 Data Connection & Disconnection ------- 10 Voice call Connection & Disconnection- 13 SMS Sending -------------------------------- 18 SMS Receiving ------------------------------- 25 Phonebook ------------------------------------- 33 Settings ----------------------------------------- 38 8-1. Data Service Terminal -------- (39) 8-2. SOUND --------------------------- (40) 8-3. SMS ------------------------------- (42) 8-4. LOCK ------------------------------ (43) 8-5. TONE ------------------------------ (44) 8-6. VOICE ----------------------------- (45) 8-7. Others ----------------------------- (47) 9. Information ------------------------------------- 48 9-1. USE -------------------------------- (49) 9-2. CALL HISTORY----------------- (50) 9-3. MODEM --------------------------- (51) 10. TATA Indicom Web Page Connection-- 52 11. About ------------------------------------------- 53 12. Un-Installation Windows Vista --------- 55 13. Health and Safety Information ------------58 1. Installation Windows Vista 1. Click Next button to install U802T 2. Select the path to be installed (Recommend to use the default location) and click Next button 1. Installation Windows Vista 3. Select the Program Folder then Click Next button to continue the installation 4. Before Installation, please remove the modem then Click Next button 1. Installation Windows Vista 5. Please wait for the Installation progress 6. Connect your U802T Modem into USB port 1. Installation Windows Vista 7. Please Check & Click the Orange color box as the above to install U802T driver 8. Please Check & Click the Orange color box as above to install U802T USB Data Modem driver 1. Installation Windows Vista 9. Please Check & Click the Orange color box as the above to install U802T DIAG Port driver 10. Please Check & Click the Orange color box as the above to install U802T GUI Port driver 1. Installation Windows Vista 11. Please Click Next button after finishing all the Installation of 3 drivers 12. Click Finish button to complete the installation of U802T 1. Installation Windows Vista 13. Open the Device Manager for Checking out the driver has installed correctly 14. When you start the GUI, the screen will be displayed as above (The default banner is TATA Indicom) 2. UI Features Instruction Data Voice SMS SMS Receive Phonebook Settings Information www.tataindicom.com About 3. Data Connection & Disconnection 1. To change the screen for Data Connect (Internet), please click the Data Icon 2. To connect the Data (Internet), please click the Connect button Before connecting to Data, Must check the valid ID, Password & numbers (Please see 8-1. Data Service Terminal Settings) 3. Data Connection & Disconnection 3. Wait for the Data Connecting (Internet) process. After connected properly, the Internet Browser will be started 4. If the Data Connection is properly connected, the Connected Message will be displayed as the above 3. Data Connection & Disconnection 5. To disconnect the Data Connection (Internet), Click Disconnect button 6. To click Yes button for disconnect, but No for cancellation of the disconnection 4. Voice call Connection & Disconnection 1. For Voice call, click the Voice Icon 2. When you click the Voice call button, the above screen with dial-pad will be displayed 4. Voice call Connection & Disconnection
-Voice call Menu-
Call End Cancel Volume (Voice) Silent (When Silent mode) Tone Silent (When Voice calling) Voice Mute (When Voice calling) Volume (Sound & Key Tone) 4. Voice call Connection & Disconnection 3. To make a Voice call, STEP Dial to wish numbers, STEP Confirm the numbers, STEP Press call 4. Calling Screen 4. Voice call Connection & Disconnection 5. When successfully connected to wish numbers , the screen would be changed as the above 4. Voice call Connection & Disconnection 6. To disconnect the Voice call, press End Icon. 7. When disconnected properly, the screen would be changed as the above 5. SMS Sending 1. To send SMS, just click the SMS Icon 2. SMS Screen 5. SMS Sending
-SMS Sending Menu-
ADD SAVE All Clear Cancel Send 5. SMS Sending 3. To send SMS, STEP Type wish message, STEP Choose Message type 4. STEP Type the numbers that you want to send message, STEP Press Send Icon 5. SMS Sending 5. SMS Sending process screen 6. After Sending SMS, a result window would be shown whether succeeded or failed 5. SMS Sending 7. Click Add Icon when you desire to send the same SMS to several phone numbers If you use this function, the new screen will be pop-up as the Right 5. SMS Sending 8. Type a desired call number and click Add Icon to another desired numbers 9. After input numbers as much as desired, just press the Confirm Icon to send message 5. SMS Sending 10. If you want to search a call number from computer, click a Search Phonebook button 11. Select the category and browse the phone number 6. SMS Receiving 1. When new SMS is received, the New Message window will be pop-up. 2. If there is a un-read messages, Message Icon will be displayed as the above until checking the message The received SMS will be saved on Received SMS box 6. SMS Receiving 3. To check the new SMS, click SMS Receive Icon. The read message is automatically saved 4. When you check the message, the time &
sender information is displayed as the above 6. SMS Receiving 5. From the category, You can also check not only Received SMS but also Sent SMS & Unsent SMS & Drafts information 6. SMS Receiving 6. If you desire to save the Received / Sent number to Phonebook , just press Save Icon then the Right screen will be pop-up 7. Fill in the information as your desire Then press Confirm Icon to save 6. SMS Receiving 8. You can also directly forward the number (Choosing From or CB) for Voice call with the Call Icon 9. Calling process screen 6. SMS Receiving 10. When you press the Forward Icon, the received message can be delivered to another desired number 11. Type your desired number to forward the message 6. SMS Receiving 12. If you want to reply to sender number, just choose From or CB from above field then click Reply Icon 13. Type your message on the screen same as SMS Sending Instruction 6. SMS Receiving 14. If you want to delete individual SMS, select SMS to be deleted and click Delete button 15. You can select not only Received SMS but also Sent SMS & Temp SMS in the category then easily delete whole saved messages with clicking Delete All Icon 7. Phonebook 1. If you want to add / remove the call number from phonebook, Click Phonebook Icon 2. When click the Phonebook Icon, Phonebook window will be pop-up as the above 7. Phonebook 3. Select the location where the lists saved 4. If you want to delete all of specific groups numbers at once, just select the desired GROUP then click the Delete All Icon 7. Phonebook 5. If you want to delete an individual phone number, select the number and click Delete button 6. If you want to save new call number, just click Add Icon then easily store new number After filling, just click Confirm to save 7. Phonebook 7. If you want to modify the stored number & details, just click Modify button 8. When you want to make a call from Phonebook, Select the number then just click the Call Icon 7. Phonebook 9. When you want to send a SMS from Phonebook, Select the number then just click the SMS Icon as the above 8. Settings 1. If you want to check or modify the settings, just click Setting Icon as the above 2. When you start the Setting, the new window will be pop-up as the above 8. Settings 8-1. Data Service Terminal The step to setup is as the circle order To connect to Server, you should input valid ID & Password only The Number should be #777 8. Settings 8-2. SOUND 1. With Setting Menu, you can set the Bell Sound &
SMS Receiving Alarm from SOUND tab The step to setup is as the circle order 8. Settings 8-2. SOUND 2. SMS Receiving Alarm is to be setup as the Circle order 8. Settings 8-3. SMS The step to setup is as the circle order When receiving SMS, can be setup as just 1 time alarm only or alarm every 2 minutes or alarm off When receiving SMS, can be setup checking it from Pop-up window or History list (Change) If Delivery Ack is setup as On, can get the confirmation of receiving SMS from receiver when SMS sending If want to delete the saved SMS automatically by desired period, you can setup the period as you want 8. Settings 8-4. LOCK 1. You can setup Lock for Call-Limit The Password can be setup using numbers from 4 to 8 digits The step to setup is as the circle order 8. Settings 8-5. TONE The step to setup is as the circle order You can setup the length of Button Sound Long / Short You can setup Connection Sound On / Off when call receiving or sending. You can setup Disconnection Sound On / Off when call disconnecting You can setup Ring Sound On / Off when you receiving call by earphone 8. Settings 8-6. VOICE Auto Answer On (5 seconds) / Off Call Waiting setup Activate / Disactive Call Forwarding setup (You can changed other number, reference to next page) The step to setup is as the circle order Call Forwarding Number setup (You can changed other number, reference to next page) Lock for Voice call 8. Settings 8-6. VOICE Call Waiting and Call Forwarding Number Setting You can changed default Number 8. Settings 8-7. Others The step to setup is as the circle order Window UI Style setup as Regular / Free Banner Setup Default (TATA Indicom) /
Custom If you select the Custom option, you can write your own characters up to 16 digits 9. Information 1. With Information Icon, you can see the status of Data using history, Voice call history & Modem information 2. When you click Information Icon, new window will be pop-up as shown 9. Information 9-1. USE 1. Information USE Tab, you can check your DATA Status information as like the above 9. Information 9-2. CALL HISTORY 1. Information DETAIL Tab, you can check your Voice call Incoming, Outgoing, Missed & Data Usage Information Also you can easily connect Voice call & SMS Sening using the Phone Number which is saved in the history 9. Information 9. Information 9-3. MODEM 9-3. MODEM 1. Information MODEM Tab, you can see the Modem Status. When you click Modem Status button, you can check the Hardware Version, Firmware Version & PRL Version 10. TATA Web Page Connection 1. While your U802T is connected to Data, and you would like to connect to TATA Indicom Web Page, just click the TATA Indicom lcon on the GUI Screen Only one step to click will lead you to TATA Indicom Web Page
(www.tataindicom.com) 11. About 1. With About Icon, you can check the Modem Information & GUI version as like the Right Screen 11. About 2. On About Information, you can register your Information to Modem as like the Right Screen 3. When you finish the filling, just click Confirm Icon 3. When you finish the filling, just click Confirm Icon 12. Un-Installation Windows Vista 1. If you want to uninstall U802T Modem & Drivers from your computer, you can select the Program My Computer Uninstall Tab, then select U802T shield as like the above Note: It doesnt require for U802T to be connected in USB port 12. Un-Installation Windows Vista 2. My Computer Program modify, repair or remove the program, Select the Remove Then when the new pop-up is displayed, click to Yes as like the Right Screen. Note: It doesnt require for U802T to be connected in USB port 12. Un-Installation Windows Vista 3. When you complete the Un-installation, Please select Yes, I want to restart my computer now then click Finish Note: It doesnt require for U802T to be connected in USB port 13. Health and safety Information
* Operating enviornment Remember to follow any special regulations in force in the area you are in, and always turn off your modem whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the modem to another device, do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position
* Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless modem. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15cm be maintained between a wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. If you have any reason to suspect that interference is taking place, turn off your modem immediately. 13. Health and safety Information Hearing aids Some digital wireless devices may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. Other medical devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information Turn off your modem in health care facilities when regulations posted in these areas instruct you to do so Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of ant equipment that has been added to your vehicle.
* Care and maintenance
-Keep your modem and accessories out of the reach of small children and pet. They may accidentally damage these things or choke on small parts
-Keep your modem dry. Precipitation, humidity, and liquids contain minerals that corrode electronic circuits. 13. Health and safety Information
-Do not drop, knock or shake the modem. Rough handling can break internal circuit boards.
-Do not store the modem in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics.
-Do not store the modem in cold areas. When the modem warms up to its normal operating temperature, moisture can form inside the modem, which may damage the modems electronic circuit boards.
-Do not put the modem in or on heating devices, such as a microwave oven, stove, or radiator. The modem may explode when overheated. RF EXPOSURE INFORMATION Your USB Modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluate on of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.*Tests for SAR are conducted with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a wireless device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The highest SAR value for this CDMA Dongle is 0.376 W/kg (CDMA CELLULAR). The FCC has granted an Equipment Authorization for this CDMA Dongle with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov /oet / fcc id after searching on FCC ID : SG7U802T. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &Internet Association (CTIA) web-site at http://phonefacts.net.*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6watts/kg
(W/kg)averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any agitations in measurements. In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. For more information about RF exposure, please visit the FCC website at www.fcc.gov WARNING!
Read this information before use Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ tv technician for help.