Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide Copyright2008 Haier Technologies Co.., Ltd All Rights Reserved Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission as Haier Technologies Co.., Ltd. Statement The contents of this manual maybe different with the cell phone please according the cell phone. Haier Technologies Company reserves the right to revise this document or withdraw it at any time without prior notice. Safety Precautions Please read these simple guidelines. Not following them may be dangerous or illegal. Do not switch the phone on when Mobile Phone use is prohibited or when it may cause interference or danger. Do not place your phone and its accessories in containers with strong electromagnetic field. Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. Hospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force. Do not use the phone at a refueling point. Do not use near fuel or chemicals. Follow any restrictions. Wireless devices can cause interference in aircraft. Keep the phone and all its parts, including accessories, out of the reach of small children. Use only approved batteries and chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life. Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. 1 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide Phone appearance Keys and Functions Press To
Enter the recent call list in idle mode. Dial or answer a call. Press and hold to switch your phone on/off. End a call during a phone call. Reject an incoming call. Return to standby. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen. Quick into Radio, Profiles, Messages menu and Names list Control the cursor directions Increase or decrease the volume during a call. Enter numbers and characters. Press and hold the 1-9 keys to dial speed-dial phone numbers. Press 1-99 keys followed by # key and then press the send key to dial speed-dial phone numbers. Select a submenu item labeled with the corresponding number. Enter the * symbol. Press and hold to lock the keypad in idle mode, and press 123 to 2 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide unlock. Activate symbol mode. Enter the # symbol. Press and hold to enable or disable the Silent profile. Press to switch between different input method in writing mode. Screen Icons Icon Description Network signal strength New message received Alarm clock on No signal Ringer mode One beep mode Icon Description Battery power level Memory for messages full Scheduler enabled Call connected Silence mode Headset profile Installing the Battery 1. Place the battery in the battery compartment. 2. Close the battery cover by sliding the cover upwards. Removing the Battery 1. Turn off your phone. 2. Remove the battery cover by sliding the cover downwards. 3. Use your fingernail to gently lift the upper edge of the battery outwards. 4. Take out the battery. 3 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide Charging the Battery Insert the charger output into charging port of the bottom of the phone 1. Plug the charger transformer into a standard outlet. 2. 3. The rolling of the electric quantity bar indicates that the phone begins to charge. 4. When the battery level full and stop rolled, the phone will display Battery full. 5. After charging is complete, switch off the electric supply and pull out the chargers jack. Using the Function Menu 1. In idle mode, press to display the Menu interface. 2. Press to scroll to a menu item. 3. Press to display the menu. 4. Display the submenu in either of the ways:
Press to scroll to a submenu item and press to display the submenu. 4 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide Press the number key corresponding to the number of a submenu to display it. 5. Press to return to the previous menu or quit the function menu. Press to return to the idle screen. Making a call 1. Dialing Select a desired entry from the names list or directly type in the phone number in idle mode, press 2. Making an international call
Press key several times until "+" appears on screen. key to dial.
Enter the country code, area code (without prefix zero) and phone number.
Press key to dial. 3. Ending a call You can end a call by pressing key. Receiving a call 1. Press key or any key (need setting) to answer the call. Or press
[Silence] key once to close incoming ringer, then press
[Accept]
key again to receive the incoming call. 2. Press
[Ignore] key or key to reject the incoming call. Phone Lock The phone lock code is used to protect your phone from unauthorized use. It can be set automatically to lock your phone each time it is switched on or when in idle mode. In this condition, you can only dial emergency call. Emergency call number is: 911. When phone is locked, to unlock user must enter the preset security code (The default code is 000000). Radio With this feature, you can use your phone to tune, save channels, and listen to FM radio stations when headset is plugged into your phone. 5 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide In radio main interface, you can use the key to switch FM sound on/off and use the key to switch between earphone pattern and speaker pattern, and you also can use key to switch between common mode and prestore mode. the By default, the radio is in common mode. Here in radio main interface press up/down navigation key to adjust the volume and press left/right navigation key to move 0.1 MHz forwards/backwards along the current FM band. You can select Search up/down option to search an available channel forwards/backwards along the current FM band. When there are radio channels saved in channel list, phone allows you to set radio to prestore mode. Here in radio main interface press up/down navigation key to adjust the volume and press left/right navigation key to search the next frequency which is saved in channel list. Changing the Text Input Method Your phone provides eZi input method. You can enter alphanumeric characters when working with the names or when you are using the message service, etc. Under the text-editing mode, press the key to switch the input method. Entering Character (Abc/abc/ABC) By pressing the key and choosing Abc, abc or ABC, you can enter uppercase and lowercase letters, and you can also press and hold the numeric keys to input numbers directly. 1) The Abc option allows you to type the first letter of each sentence in uppercase. When you have typed the first letter, Abc will be changed to abc automatically. 2) The abc option allows you to type in lowercase letters. 3) The ABC option allows you to type in uppercase letters. You can press desired numeric key, once to input a character, twice to display the second character, by analogy to finish the text. Entering Character (en/En) By pressing the to type in all the characters of that word. key and choosing en or En, you can create a word without having 1) The en option allows you to type predictive text in English with the first letter of each sentence in lowercase. 2) The En option allows you to type predictive text in English with the first letter of each sentence in uppercase. When you have typed the first word, En will be changed to en automatically. Associated words should be displayed after you have to type in a single letter or first few letters of the word you want to input. Then you can insert the desired word by pressing the key or 4-ways navigation keys and single pressing corresponding numeric key. 6 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide Entering Number (123) 1. In text-editing mode, press the top-right corner of the screen. key several times until 123 is displayed at the 2. Press the numeric keys to input numbers. Entering Symbols key to enter the special character library. 1. Press the 2. Press 4-ways navigation keys to view the symbol you need. 3. Press the corresponding numeric key to select. 7 Qingdao Haier Telecom Co. Ltd. D2100_multi-links_User Guide Annex I: RF Exposure Information The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device (FCC ID: SG70901HC-D2100) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.311 W/kg and when properly worn on the body is 0.502 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. 8