FCC ID: 2ALJ3AP32X HAN Access Point

HAN AP321 and AP321e Installation Guide Summary of Installation Steps WLAN Planning. Usually, a comprehensive site survey is required before installation, such as installation location, brackets, cables, power source, etc. Unpack the AP box and check all contents Install the AP bracket on ceiling or wall Installing the AP Connecting required cables Power connection Verifying post-installation connectivity AP provisioning Access points are radio transmission devices and are subject to governmental regulation. Network administrators who are responsible for the configuration and operation of access points must comply with local broadcast regulations. Specifically, access point must use channel assignments appropriate to the location where the access point will be deployed. Package Contents Name Qty Access Point Quick Start Guide Installation Guide Regulatory Compliance and Safety Information User Guide Info Card Unit Pcs Pcs Pcs Pcs Pcs 1 1 1 1 1 Optional AccessoriesTo be ordered separately Name OAW-AP-MNT-B OAW-AP-MNT-C Description Indoor mounting kit, Type B1(9/16") and B2(15/16") for T shaped ceiling rail. Indoor mounting kit, Type C1(Open Silhouette) and C2 (Flanged Interlude), for other shaped ceiling rail mounting. Indoor mounting kit, Type W wall and ceiling mounting with screws. OAW-AP-MNT-W Figure1: Product Packing Item 1 2 Item 1 2 3 Figure 2: AP321 Front View Figure 3: AP321e Front View Figure 4: AP321e Include Antennas Front View Figure 5: Install the external antenna on AP321e. Inform your HAN sales representative of incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials. Use these materials to repack and return the unit to the supplier if needed. Additional mounting kits for use with the AP321 series access points are sold separately. Contact your ALE sales representative for details. Hardware Overview The following sections outline the hardware components of the AP321 and AP321e Series access point. The external antennas is sold separately. The AP321 and AP321e access point is equipped with hidden LED display that indicates different status with different color. For the details of the LED status, please refer to the Quick Start Guide. LED Console Port Pinout Figure 6: AP321 and AP321e Back View Connector Pin Signal Name Function Power 3 4 5 6 TXD GND GND RXD Transmit Ground Ground Receive 1 2 3 4 5 6 7 8 Pins not listed are not connected. Note: The serial console port allows you to connect the AP to a serial terminal or a laptop for direct local management. This port is an RJ-45 female connector with the pinouts described in Table 3. Currently for use by Service & Support only. The OAW-AP1320 series access point supports direct DC power adapter

(48V DC nominal, sold separately) and Power over Ethernet (PoE). The DC power connector port is located on the back of the device, as shown in Figure 6. The PoE allows the Ethernet port to draw power from an IEEE 802.3at compliant source. OmniAccess Stella AP supports the power adapter provided by ALE ONLY. Before You Begin Pre-installation Checklist Refer to the sections below before beginning the installation process. Before installing your OAW-AP1320 Stellar access point, be sure that you have the following items:

8-conductor, CAT5 or better UTP cable of required length. One of the following power sources:

IEEE 802.3at compliant Power over Ethernet (PoE) source

(PoE switch or PoE injector), best with 2.5GbE PoE port. AC-DC adapter (sold separately)output voltage DC 48V, output current 0.5A A terminal or a notebook Identifying Specific Installation Locations You can mount the OmniAccess Stellar AP on a ceiling rail or on a wall. You should first determine the location of the installation. The installation position is located at the center of the required coverage area and should be free from obstructions or obvious sources of interference. Minimize the number of obstructions (such as walls) between the AP and user terminals. Electronic equipment or devices (such as microwave ovens) which may produce radio frequency noise should be away from the installation position of the AP. It is strictly prohibited to install around stagnant water, water seepage, leakage or condensation. Avoid cable condensation or water seepage along the cables connecting to the AP. AP Installation Refer to mounting kits installation Guide. Verifying Post-Installation Connectivity The LED on the AP can be used at this point to verify that the AP is receiving power and initializing successfully. AP321 and AP321e Connections Table 1 External Interfaces Item Name Specifications DC Power Socket 2.5 Gigabit Eth0 1 Gigabit Eth1 Console The AP has a single 48V DC power jack socket to support powering through an AC-to-DC power adapter, If PoE is not available, an optional AC-DC adapter kit (sold separately) can be used to power the AP. 1x 100/1000/2.5GBASE-T autosensing (RJ-45) port, Power over Eth0 (PoE) 1x 10/100/1000BASE-T autosensing (RJ-45) port, Power over Eth1 (PoE) The console port is an RJ-45 female connector and can be used to connect to a terminal for direct local management. Note: Currently for use by Service & Support only. USB USB 2.0 host interface (Type A, output current 0.5A ) Reset Security Lock Slot Factory reset. Press reset button for 5s, AP LEDs will quickly flashing for 3s, then AP will restart and restore factory configurations. The AP is equipped with a security lock slot for additional security. Table 2 Ethernet Port Pinout Connector Pin Signal Name PoE 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 RJ45_DA+

RJ45_DA RJ45_DB+

RJ45_DC+

RJ45_DC RJ45_DB RJ45_DD+

RJ45_DD PoE-

PoE-

PoE+

PoE+

PoE+

PoE+

PoE-

PoE-

Table 3

HAN Access Point AP321 and AP321e Regulatory Compliance and Safety Information xxxxxx-xx Rev. A

*xxxxxx-xx Rev. A*

Introduction

[REMAINING SECTIONS INTENTIONALLY LEFT BLANK]

This document contains domestic and international regulatory compliance information for the access point. To ensure that this device complies with the regulatory standards for your region, please refer to the content below. FCC Part 15:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product may not be collocated or operated in conjunction with any other antenna or transmitter This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. California Proposition 65 Warning WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

hon 2 @ GED Model: ap32te Rev. A CERTIFIED Input: 48V = 500 mA O-G-@

HANA (4) CE PN:1HA01010058AAAA Ce UNIAN) Fee 19: 241-s3arsax SN:SSZ180900001 UIQ NA A ree MAC@ 34:E7:08:00:00:00 UUM NOAA tal BLE MAC@ 34:E7:0B:00:00:1F ACRE SA PARA IRA] Pane HAN Networks Co., Ltd. Made in China hon 2 @ GED CERTIFIED Input: 48V = 500 mA eee HANA (4) CE PN:1HA01010058AAAA a Model: AP324 UMUC] * P+ 28t9arsox SN:SSZ180900001 CUM NCAT A Pe MAC@ 34:E7:0B:00:00:00 BLE MAC@ 34:E7:0B:00:00:1F ALES APA IRA] ane HAN Networks Co., Ltd Made in China

101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China HAN Networks Co., Ltd Date: 2020.02.10 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2ALJ3AP32X Confidentiality Request Pursuant to FCC 47 CRF 0.457(d) and 0.459, Section 10, HAN Networks Co., Ltd. requests that a part of the subject FCC and/or IC application listed below be held permanently confidential and permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Operational Description Further, the Applicant has spent substantial effort in developing this product, some aspects of which are deemed to be trade secret and proprietary. Having the subject information easily available to our competitors in this market would negate the advantage we have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Sincerely yours, Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com

HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China Pursuant to Sections 0.457 and 0.459 of the commission's rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

Federal Communications Commission Authorization and Evaluation Division Data: 2020.02.10 Confidentiality Request FCC ID: 2ALJ3AP32X Test Setup photos Thank you, Sincerely yours, Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com

HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China Description of Permissive Change Federal Communications Commission Authorization and Evaluation Date: 2020/02/10 Division Ref: Description of Permissive Change Applicant: HAN Networks Co., Ltd This is to request a Class II permissive change for HAN Access Point, FCC ID: 2ALJ3AP32X to enable DFS channels. No modification to the previously type approved RF circuit was required to accommodate this change. For reference, original FCC grant was issues on Dear Examiner, 02/06/2020. If you have any questions regarding this application, please feel free to contact me. Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com

HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China AGENCY AUTHORIZATION LETTER Date: 2020.02.10 FCC ID: 2ALJ3AP32X We, the undersigned, hereby authorize MRT Technology (Suzhou) Co., Ltd to act on our behalf, to act on our behalf in all manners relating to FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by MRT Technology (Suzhou) Co., Ltd within the scope of this authorization shall have the same effects as our own. Name Representative of agent: Marlin Chen Agent Company name: MRT Technology (Suzhou) Co., Ltd Address: D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, City: Suzhou Country: China If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com

HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China Non-SDR (Software Defined Radio) Cover Letter Date: 2020.02.10 Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an 1. Can the RF parameters of the device be altered through software?

2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

3. Is the device capable of operating in any other in any other way than granted, or will be, SDR. Yes - go to 2. No, not an SDR Yes Yes, must be an SDR. No - go to 3. No No granted?

Yes, - go to 4. No - go to 5. 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. No, Not an SDR No Final conclusion:

According to the above questions reply, we can confirm this HAN Access Point, FCC ID:

2ALJ3AP32X must be a Non-SDR. The equipment can only support one exclusive regulation. The hardware devices will be locked to the activated regulatory domain and cant be modified by any third party through configuration changes or software upgrades. The client only need to download the software/firmware from official website, and these software/ firmware shall be authentication protocol by the manufacturer. Signature:

Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com

HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China Date: January 06, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2ALJ3AP32X ATTESTATION Product: HAN Access Point Model: AP321, AP321e HAN Networks Co., Ltd does not provide any means to control or software to allow operation outside of the USA frequency band when sold in the United States. Sincerely, Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com

HAN Networks Co., Ltd 101-A16, 1st Floor, Building 3, No.9 compound, Yongfeng Road, Haidian District, Beijing, P.R. China Federal Communications Commission Authorization and Evaluation Division Data: January 06, 2020 Confidentiality Request FCC ID: 2ALJ3AP32X Pursuant to Sections 0.457 and 0.459 of the commission's rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos User Manual Internal Photos Thank you, Sincerely yours, Lawrence Lu / Chief Compliance Engineer HAN Networks Co., Ltd. TEL: +86-010-58627921 E-mail: li.lu@han-networks.com