User Manual (HB-USP-GT2-B) User Manual Model : HB-USP-GT2-B 44-10, Techno10-ro, Yuseong-gu, Daejeon 305-510, Korea. TEL) 042-862-5882 FAX) 042-932-9624
- 1 -
User Manual (HB-USP-GT2-B) Chapter 1. Overview 1.1 Overview of Product HB-USP-GT2-B is a sink node that receives data from HB-USP-GT1L-B via wireless communication and transfer data to universal monitoring program(LDP) via ethernet. 1.2 Composition of Product Name Quantity Remark Main body (HB-USP-GT2-B) Power adaptor LAN cable RF antenna 1 1 1 1 Input : AC100~240V(50/60Hz) Output : DC5V 4A UTP cable (1m) Helical antenna(2.4GHz, 2.85 dBi)
* : Direct current 1.2.1 Main Body HB-USP-GT2-B consists of RJ45 port, power terminal, RF antenna, and LED.
- 2 -
User Manual (HB-USP-GT2-B) 1.2.2 Power Adaptor Power adaptor is a device that supplies power to operate the main body of sink node. Power input is AC 100~240V (50/60Hz) and output is DC5V, 4A. 1.2.3 LAN Cable LAN cable is used to connect the main body with a monitoring device (PC, etc.) 1.2.4 RF Antenna RF antenna is used to transmit or receive electromagnetic waves.
- 3 -
User Manual (HB-USP-GT2-B) Chapter 2. Product Description 2.1 Specifications Specifications of this product are as follows. Hardware Microprocessor Memory Clock speed RF Ethernet Ethernet Interface Protocol Communication Speed Connector RF Interface Protocol Baudrate Communication distance Frequency range Transmit power Antenna Analog Sensor Power Supply Voltage Power and Environment Input voltage range Operation Temperature Storage Temperature Case materials Weight Dimension STM32F205 (32bit, ARM cortex-M0) 128Kbyte program memory 64KByte SRAM 120MHz Bluetooth W5500 TCP/IP, UDP/IP 10Base-T (10Mbps) RJ45 Bluetooth 2.0 + EDR, Class2 921,600 bps 50m 2402MHz ~ 2480MHz 1dBm(Typical) Helical, 2.85 dBi, SMA type DC 5V
~ 60
~ 70 4.8V ~ 5.2V
-20
-30 ABS (Acrylintrile-Butadiene-Styrene) 150 g 84 x 89 x 30 mm (W x H x D), except RF antenna
- 4 -
2.1.1 Name of Each Part Name and function of each part of this product are as follows. User Manual (HB-USP-GT2-B) Power terminal This is power input terminal to operate the main body of sensor node. Power adaptor provided upon purchase is connected to this terminal. Ethernet communication port This port is used to transfer sensor data to general monitoring program. The provided LAN cable is used to connect this port to a monitoring device (PC, etc.). LEDs This product has 3 LEDs.
- LED #1 : Not function
- LED #2 : Blink 2~3 times per second
- LED #3 : Blink 1 time per 4 seconds Antenna This antenna is used to transmit or receive electromagnetic waves. The gain is 1dBi.
- 5 -
FCC Compliance Statement This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment.