W07I98M-RTC1 7 inch Tablet PC Quick Start Guide Version: 1.0 W07I98M-RTC1 7 inch Rugged Tablet PC Users Manual W07I98M-RTC1 Accessory Item Description 2 piece of 2 Cell Li-Polymer Battery Pack Note Hot-swappab le for battery change 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for System Driver Utility. 1 piece of 12V Adapter w/ Standard Power Cord. Euro / U.S. Std type, 1.8m Operation System Packing List Item Description 1 piece of CD for Recovery CD for Operation System (Windows 7 or Windows XP embedded). 1 piece of Windows 7 or Windows XP embedded Recovery Users Guide. Note Optional with Windows XP embedded preinstalled Optional with Windows XP embedded preinstalled Users Manual Rugged Table PCs 2 W07I98M-RTC1 IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully before using the product and save for later reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Clean the product with a damp soft cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the screen. Do not use this product near water. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. (For AC version only) Do not defeat the purpose of the grounding-type plug. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. Do not attempt to service this product by yourself, as opening or removing covers may expose you to dangerous voltage points or other risks and will void the warranty. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
When the power cord or plug is damaged or frayed. If liquid has been spilled into the product. If rainy or water has been exposed to the product. If the product does not operate normally that the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or the cabinet has been damaged. If the product exhibited a distinct change in the performance, that indicates a need for service. Users Manual Rugged Table PCs 3 W07I98M-RTC1 Copyright Notice Copyright 2008 Winmate Communication Inc., ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Winmate Communication Inc. reserves the right to make any product changes without notice, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Winmate Communication assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. Winmate Communication Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. Warranty Winmate warrants that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. If the customer discovers a defect, Winmate will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service. If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December). For example, the serial number 1W08Axxxxxxxx means October of year 2008. Users Manual 4 W07I98M-RTC1 Customer Service We provide service guide for any problem as follow stepsFirst, visit the website at http://www.winmate.com.tw to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may have the following information ready before you call
Product serial number Peripheral attachments
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. Please do not hesitate to call or e-mail us. Notice 1. Do not touch the LCD panel surface with sharp or hard objects. 2. Do not use abrasive cleaners, waxes or solvents for cleaning, use only a dry or damp, soft cloth. 3. Use only with a high quality, safety-approved, AC/DC power adapter. Users Manual 5 W07I98M-RTC1 Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis Users Manual 6 UL Safety Announcement UL Classification: Class I mark: with respect to electronic shock; Fire and hazardous material only in accordance with the regulation of UL-60950 and CAN/CSA C22.2 No. 601.1.
Power Supply Announcement The Handheld Rugged Tablet PC Power Supplies are supported by Power Adapter and Battery Pack, the power rating announcement and manufacturer information list as below. Power Adapter Manufacture: EDAC Power Electronics Co Ltd Model: EA1050C-120 Input Rated: 100-240Vac, 1.8A, 50-60Hz. Output Rated: DC 12V, 4.16A. Battery Pack Manufacture: JHT energy International Co Ltd Model: RTB-1 Rated: 2600mAh DC 7.4V
Power Notice!
(1) Please aware of the power code of adapter need to be connected to the Earth ground.
(2) Please notice the Power Standby mode when push power button at least 4 seconds to go to sleep status. (See Chapter 2.1 Starting and Stopping the Tablet PC) Users Manual Rugged Tablet PCs W07I98M-RTC1
Battery Notice!
WARNING Do not fix or replace battery, it may cause explosion! Only use with specified battery by following the manufacturers user manuals instruction. Users Manual 8 W07I98M-RTC1 Contents IMPORTANT SAFETY INSTRUCTIONS................................................3 CHAPTER 1 SPECIFICATION ......................................................................12 1.1 SYSTEM SPECIFICATION........................................................................................................12 1.2 HOW TO USE THE TABLET PC...............................................................................................13 1.3 LED INDICATOR ....................................................................................................................14 1.4 USING THE BATTERY PACKS .................................................................................................15 1.5 THE BATTERY LIGHT SIGNAL INSTRUCTION........................................................................19 CHAPTER 2 SOFTWARE OPERATION.....................................................22 2.1 TURNING ON AND OFF THE TABLET PC...............................................................................22 2.1.1 TURN ON THE TABLET PC..................................................................................................22 2.1.2 TURN OFF THE TABLET PC ................................................................................................22 2.2 HOW TO USE THE SOFTWARE UTILITY ......................................................................................23 2.3 HOT TAB SOFTWARE UTILITY FUNCTIONS..............................................................................24 CHAPTER 3 TABLET PC POWER MANAGEMENT............................34 3.1 ABOUT AC ADAPTER .................................................................................................................34 3.2 CHARGING AND CHECKING CHARGING STATUS......................................................................35 3.3 POWER-SAVING TIPS ................................................................................................................38 CHAPTER 4 EXPANDING YOUR TABLET PC ...................................40 4.1 HOW AND WHEN TO USE BIOS SETUP...................................................................................40 4.2 BIOS FUNCTIONS .....................................................................................................................41 4.2.3 Boot Menu.......................................................................................................................44 4.2.4 Security Menu................................................................................................................45 4.2.5 Exit Menu ........................................................................................................................46 Users Manual 9 W07I98M-RTC1 CHAPTER 1 Specification Users Manual 10 W07I98M-RTC1 This User Manual cover the use of an W07I98M-RTC1 with Microsoft Windows 7 and Windows XP E OS, but other operating systems can also be used. Please contact your supplier for further information. The W07I98M-RTC1 is a compact high performance, low weight rugged Tablet PC designed for outdoor fieldwork purpose. The W07I98M-RTC1 can survive in severe environmental conditions including vibration, shock, moisture and temperature variations. The W07I98M-RTC1 is suitable for use in harsh environments such as construction sites, warehousing, defense, manufacturing and field service. The W07I98M-RTC1 is delivered with two batteries and an AC adapter. Users Manual 11 W07I98M-RTC1 CHAPTER 1 SPECIFICATION This Chapter introduces the W07I98M-RTC1 specification. 1.1 System Specification System Processor Intel ATOM Z530 BIOS Chipset Memory AMI System BIOS Intel US15W 1 x SODIMM, Max 2GB DDR2 400/533 (Default 512MB) LAN Controller Realtek RTL811B Chipset, 10/100/1000 Mbps Storage PATA interface support Mini-PCIe interface SSD
(Default 32GB) Audio Audio out for headset, Micro-in for microphone jack,1.5W Speaker (Internal) I/O Connectors Left I/O Port Right I/O Port In Front Control 1x Micro-In, 1x Audio Out,1x Giga LAN, 1x USB, 1x DC Power Jack 1x RS232, 1x USB Control Button 1x Power On/Off, 1x Menu, 1x Up, 1x Down, 1x Left, 1x Right 3x Programmable Hotkeys LED indicator 1x Power Status, 1x HDD Status, 2x Battery Status, 1x Wireless Status Display Specification Size 7 (16:9) Resolution 1024x600 Brightness 600 nit Touch 4 Wire Resistive Touch Power Management Power Input 12 V DC @ 4.16A Power 9W Consumption Battery Li-Polymer 7.4V 2S1P, 2600mAh /2S2P, 5200mAh Adapter 100-240V, 50-60Hz, 12VDC Users Manual 12 W07I98M-RTC1 Wireless Communication WLAN 802.11b/g/n (USB Half-Mini-Card.) built-in Bluetooth Bluetooth (internal by usb module) WWAN PCI Express full size (Type F1) mini-card form factor 3G Modem Supported frequency range WCDMA Release 99HSDPA Release 5HSUPA Release 6 GPRSEGPRSCDMA2000 1X CDMA2000 1xEV-DO(for Optional) GPS MTK GPS Solution (internal UART module) (for Optional) 1.2 How to Use the Tablet PC This section describes how to control this Tablet PC. 1 Components Function Description Power On Button PUSH 4 seconds to turn on the tablet pc See Other Intro. Users Manual 13 W07I98M-RTC1 Shows the Power Status, HDD Status, Left and Right Battery Status, and Wireless Status Push Menu function to show Brightness, Volume,Battery status and Wireless Enable/Disable. 6 programmable Hot-key functions for user to define by application, default first short push key (F1 short) will turn-on Outlook Express Cotrol the up, down, left, right and Enter function. 2 LED Indicator 3 Menu 4 5 F1 F3 Hotkey Up/Down/
Left/
Right/OK Button 1.3 LED Indicator Power mode Green: System Turn On. No Light : System Turn Off No Light: 100% full charge or power on with AC adapter Orange Light: Product under charge Green Light: Discharging battery between 3% ~ 100%
Battery Status Red Light: Discharging batery under 3%
Red light : Battery Absent Storage Status Green Light blinking: HDD is using Wifi status Green Light blinking: Wifi is using No Light: Wifi is not working Users Manual 14 W07I98M-RTC1 1.4 Using the Battery Packs This section describes the details of using the battery packs. Using the Battery Packs Before you use your Handheld tablet PC on the road, you will have to charge the battery packs, the battery packs begins to charge as soon as the Handheld tablet PC is connected with the external power source. Please fully charge the batteries before using them in the first time. The new battery packs must 100% charged before the Handheld tablet PC is disconnected with the external power source. The battery pack is fully charged when the battery light indicator turns OFF. It takes about couple of hours to fully charge the battery when the Handheld tablet PC is turned OFF. Battery Care The Handheld tablet packs like all rechargeable batteries, it have limit on the number times it can be fully recharged. Fully draining and charging the battery once a day in each day will leave the batteries last over a year, but rechargeable time limits are based on your environmental temperature, humidity, and how your tablet PC is used. The ideal environmental temperature range between 10C and 29C
(50F and 85F). Battery Power System The Handheld tablet PC is designed to work with two removable battery packs located inside the battery pack compartment. The fully charged batteries pack will provide several hours of battery life, which can further extended by using power management features through the BIOS setup. The battery system implements the power management software which allows the battery to accurately report the amount of charge percentage left in the battery. Charging the Battery Pack You can charge the battery pack by using the power adapter. When the power adapter is plugged in, the inserted batteries packs automatically recharges whether your tablet PC is ON or OFF. It takes Users Manual 15 W07I98M-RTC1 about couples of hours for battery to receive fully charge when the power is OFF but takes twice as long when the tablet PC is in use. When the red charge LED indicator in flashing, charging is required. The battery is charging when the red LED is solid, when the LED is turned OFF, the battery pack is fully charged. Insert the battery pack Step 1 Insert the battery pack into the battery slot. Step 2 Press down the compression lock into the tablet pc. Users Manual 16 W07I98M-RTC1 Step 3 Press the latch down to fasten the battery on the tablet PC To remove the Battery Step 1 Press the latch up to loose the battery pack on the tablet PC Step 2 Press up the compression lock from the tablet pc. Users Manual 17 W07I98M-RTC1 Step 3 Take the battery pack from the battery slot.
**Caution Do not use the stylus pen to open the service window under normal situation . Users Manual 18 W07I98M-RTC1 1.5 The Battery Light Signal Instruction 1. The two battery packs charging procedure. Battery Light Signal When the tablet pc is connected with the power source, the battery packs are starting to charge. A. Battery Charging Mechanism:
1. The battery packs are both at low power level a. If first batterys power level is higher the second battery than 10%, the PC will charge the second battery first. b. If both batteries power level differences are lower than 10%, the PC will charge two batteries at the same time. 2. If one battery is full charged, the other is at low power level, the PC will charge the battery which is at low power level. 3. If both batteries are full charged, the PC will shut down the charging current. Users Manual 19 W07I98M-RTC1 B. Battery Discharging Mechanism:
1. If the battery on the right is full charged (>3%), the PC will select the right one as the power source. 2. If the battery on the left is full charged (>3%), the PC will select the left one as the power source. 3. If the both batteries are full charged, long push the F3 hot tab to switch the battery power source. 4. When the batterys power level is under 3%, the PC will automatically switch the power source to the other battery. 5. When both batteries power level are under 3%, the PC will turn off the power automatically to protect the battery pack. Battery Light Signal: Charging Low Power Battery Left(#1)\Right(#2) Left: 3%~100%
Right:
3%~100%
Use Left :
Use Right:
Left: 0%~3%
Right: 0%~3%
Right :No battery Use Left:
Use Right:
Switch to Left Turn off the PC Left:
Turn off the PC Use Left :
Switch to Right Use Right:
Use Right: Turn off the PC Turn off the PC Left: No battery Users Manual 20 W07I98M-RTC1 CHAPTER 2 Software Operation Users Manual 21 W07I98M-RTC1 CHAPTER 2 SOFTWARE OPERATION This Chapter will guide you how to operate the Tablet PC, including start / stop the PC, and how to use menu function including basic hardware function adjustment and the Hot Tab hotkey utility software that is very easy & helpful for operating the computer. Power On/Off Switch 2.1 Turning On and Off the Tablet PC 2.1.1 Turn on the Tablet PC 1. Place your tablet PC on a flat and stable surface or hold the tablet PC on your hand. 2. Make sure the tablet PC is either connected with AC power adapter or the battery pack with power. 3. Press the power button at least for 4 seconds to turn it on. 2.1.2 Turn off the Tablet PC Turn off the tablet PC power source by using the Shut Down command of your operating system.
**Caution If you have to turn the tablet PC on again immediately after turning it off, please wait for at least for five seconds. Be sure to know that turn the tablet PC off and on rapidly can damage the whole device. Users Manual 22 W07I98M-RTC1 2.2 How to use the software utility Hot-Tab Hotkey Function Function Description Function Adjustment Show Current Brightness Show current Volume Show current Battery Usage and Two BTR status Show current on/off of Wireless\ Bluetooth mode Click Right/Up to decrease brightness(Or Drag by Touch) Click OK to confirm and eliminate UI. Click Left/
Down button to increase brightness
(Or Drag by Touch) Click OK to confirm and eliminate UI. Use touch button to select all kind of wireless communication function and the led indicator on the membrane Enable/ Disable PUSH Menu 1st Time 2nd Time 3rd Time 4th Time 5th Time Show software version for a. Hot TAB Utility version b. BIOS / EC version Lock/Unlock all button function Push 4 seconds to Lock all button**(not including Touch) LONG PUSH 4 sec Push 4 seconds to Unlock back to normal operation Users Manual 23 W07I98M-RTC1 2.3 Hot TAB Software Utility Functions 2.3.1 F1 Hot TAB functions will show four functions A. The first is virtual mouse B. Screen rotation C. Onscreen Keyboard Users Manual 24 W07I98M-RTC1 D. F2 to F3 functional Hot key You can use Browse and choose the execution program file. 2.3.2 Power Manage function 2.3.3 System Information 1. When you press menu 5th time, you can see the system information. Users Manual 25 W07I98M-RTC1 2. Low battery warning notice:
Users Manual 26 W07I98M-RTC1 2.3.4 Connecting to a Wireless Network To connect to a wireless network:
1. Push Menu function and making sure the Wireless function is On. 2. By using the defult build-in module, the Windows Wireless Network Connection will be disabled. The Ralink wireless connection utility is recommended in our Tablet PC systems. Users Manual 27 W07I98M-RTC1 3. Right-click the Ralink utility in Windows system tray and choose Launch Configu Utility. 4. The Ralink Utility program will detect all wireless links automatically and show each status, choose one you want to link and click Connect. Users Manual 28 W07I98M-RTC1 5. Log in password if necessary, and click OK to enter detail connection quality status. 6. Log in password if necessary, and click OK to enter detail connection quality status. Users Manual 29 W07I98M-RTC1 2.3.5 Using the Bluetooth Wireless Feature We apply Bluetooth 2.1+ EDR module for default function of the Tablet PC series. Depending on your application, the Bluetooth module can give you capability for short-range wireless communicaitons between devices without requiring a cable connection. The transmission can go through walls, pockets and briefcases as long as two devices are within range around 10 meters. Following the easy step to connect to the Bluetooth communication. 1. Choose HotTab AP Menu function and making sure the Bluetooth function is On. 2. After installing the driver utility, the Bluetooth shortcut will shown on screen, double click the shortcut and it will search any bluetooth device automatically. Or double click Search Devices to search again. Users Manual 30 W07I98M-RTC1 3. Choose the bluetooth device you want to connect, and left click to choose Connect. Then the device will be connected to the module. 4. When under connecting, left click to check the connection status, or choose Unplug to remove the connection. Users Manual 31 W07I98M-RTC1 2.3.6 Using the 3G Feature We apply a PCI Express full size 3G module for default function of the Tablet PC series. Depending on your application, the 3G module can datacard and host PC software combination deliver multiband CDMA2000 1xEV-DO, UMTS, and GSM wireless wide area network (WWAN) connectivity in a single hardware configuration. 1. Choose HotTab AP Menu function and making sure the 3G Module is On. 2. After installing the driver utility, the 3G shortcut will shown on screen, double click the shortcut and it will search any bluetooth device automatically. Or double click Search Devices to search again. 3. Choose HotTab AP Menu function and making sure the 3G Module is On. Users Manual 32 W07I98M-RTC1 CHAPTER 3 Tablet PC Power Management Users Manual 33 W07I98M-RTC1 CHAPTER 3 TABLET PC POWER MANAGEMENT 3.1 About AC Adapter Our Tablet PC support one set of AC adapter and power code by country area. Please confirm with your dealer for appropriate power code if necessary.
**Caution 1. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the tablet PC. A reverse procedure may damage the AC adapter or tablet PC. 2. Always hold the plug head when you unplug the connector, Never pull on the cord. 3. The AC adapter is designed for use with your tablet PC only. Connecting the AC adapter to another device can damage the adapter. The adapter operates on any voltage in the range of 100~240 V AC. The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because the tablet PC runs on DC power input, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. Users Manual 34 W07I98M-RTC1 3.2 Charging and Checking Charging Status 3.2.1 Charging the Battery Pack The battery pack is the internal power source for the tablet PC. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the tablet PC. When your applications often access peripherals, you will experience a shorter operating time. NOTE:
1. Charging will not start if the batterys temperature is below 0
C
F). It is also recommended not to charge the battery when
(32 temperature is above 45
C (113
F) 2. To prevent damage, the charging process may stop and the Battery Charge Indicator flashes red when the environmental temperature gets above 55
C (131
F) 3. The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the tablet PC. Users Manual 35
W07I98M-RTC1 3.2.2 Regulating the Battery If the battery is used frequently, recommend you to regulate the battery every month. And if you have following conditions, please regulate the battery immediately:
The battery status is incorrect battery level.
The battery pack is not use above one month.
The battery work time have striking change. Following the step by step to set up Battery Calibration in BIOS. 1. Enter to the Tablet PC BIOS setup, select in Advanced option. 2. Enter to the Battery Calibration, press OK to go next. When you Push OK to start Battery Calibration, following below indicated to regulate the battery. 3. Please plug-in an AC adapter to supply power,it will recalibrate the gauge of battery now. 4. Initialize battery and adjust LCD brightness. It is charging the battery, the waiting time depend on the battery level between few second and four hours. 5. While the battery is fully charged, please remove the AC adapter and LEAVE the Battery RUNNING OUT OF POWER that normally need to wait for few hours. 6. While the power level running out, you can charge the battery again. When the battery is fully charged, its finished to regulate. You can turn on the tablet PC to normal use. Users Manual 36 W07I98M-RTC1 3.2.3 Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10 %
(Windows default setting) of its charge remaining. The tablet PCs Battery Charge Indicator ( ) blinks red to alert you take actions. NOTICE:
1. You can set up the Battey Low threshold and signals under Windows. Immediately save your data upon Battery Low. The remaining operating time depends on how you are using the tablet PC. If you are using the audio subsystem, PC card, hard or USB flash disk, the battery might run out of charge very quickly. 2. Always respond to Battery Low by placing your tablet PC on the Standby or Hibernation mode, turning off the tablet PC, or connecting the AC adapter. CAUTION:
1. If you do not take any action, the tablet PC will automatically hibernate and turn off. 2. If you are using a PC card, do not access the card during battery low periods. The access may takes longer time than battery to run out of charge, thus making your access to the card fail. 3. If you fail to save your data when the battery completely runs out of charge, then you will lose your data. Users Manual 37 W07I98M-RTC1 3.3 Power-Saving Tips The following are some Power-Saving Tips suggestions to maximize the batterys operating time.
Do not disable Power Management.
Decrease the LCD brightness to the lowest comfortable level.
Shorten the length of time before Windows turn off the display.
USB devices use power just by being connected. If you use a USB mouse, you can save power by disconnecting the mouse and using the optional touchscreen pen.
If you use a USB flash drive, unplug it when you are not using it.
If you work with an application that uses a PC card, exit the application when you finish using it.
If you have a PC card installed, remove it when not in use. Some PC cards drain power even while they are inactive.
Deactivate the Wireless LAN function if you are not using it (see Chapter 2).
Deactivate the Bluetooth wireless feature if you are not using it (see Chapter 2)
Turn off the tablet PC when you are not using it. Users Manual 38 W07I98M-RTC1 CHAPTER 4 Expanding Your Tablet PC Users Manual 39 W07I98M-RTC1 CHAPTER 4 EXPANDING YOUR TABLET PC 4.1 How and When to Use BIOS Setup For enter to the Tablet PC BIOS setup, you need connect to external usb keyboarb, press Del key when the prompt appears on the screen during start up. The prompt screen shows only few seconds so need press Del key quickly.
**NOTICE Updated BIOS version may be published after the manual is released. Check with the latest version of BIOS on website. You may need to run BIOS setup utility when the below status. 1. Error message on sreen indicate to check BIOS setup. 2. Restoring the factory default settings. 3. Modifing the specific hardware specification 4. Want to opttimize the specification. To control the keyboard to select BIOS utility setup, you need Keyboard Icon Function Description Selects a menu title Selects an item or option Go to the sub-menu when available Opens or closes the option window when an item is selected To leave sub-menu and return to main menu.
, Enter Esc
**NOTICE You can press the F1, F9, F10, /+, and Esc keys by connecting a USB keyboard to your tablet PC. Make sure that the item Legacy USB Support under the Main menu is set at Enabled (default). Users Manual 40 W07I98M-RTC1 4.2 BIOS Functions 3.2.3 Main Menu The main menu contains the information of the Tablet system including BIOS version, processor, system memory, time, and date. 4.2.2 Advanced Menu The advanced menu contains the configuration information of CPU, IDE/ SATA, ACPI, APM Configuration and Battery Calibration(see Chapter 3.2.4 for detail). Users Manual 41 W07I98M-RTC1 1. CPU Configuration 2. IDE/ SATA Configuration Users Manual 42 W07I98M-RTC1 3. ACPI Configuration 4. ACPI Configuration Sets the Resume On LAN and Resume On RTC Alarm function.
(1). Resume On LANDisable or Enable LAB GPI to generate a wake event.
(2). Resume On RTC Alarm NoteThe LAN Resume function only works in AC mode, not works in Users Manual 43 W07I98M-RTC1 battery mode. 5. Battery Calibration The detail of Battery calibration is show in chapter 3.2.4. 4.2.3 Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a boot device from which to load the operating system. A brief description of button usage is listed next:
Users Manual 44 W07I98M-RTC1 Chck the Hard Disk Device in Hard Disk Drives. 4.2.4 Security Menu Change Supervisor Password, Change User Passwaord and Clear User Password. Users Manual 45 W07I98M-RTC1 4.2.5 Exit Menu The Exit menu displays ways of exiting BIOS Setup utility. After finishing with your settings, you must save and exit so that the changes can take effect. Save Canges and Exit saves the changes you have made and exits BIOS Setup utility. Discarding Changes and Exit exits BIOS Setup utility without saving the changes you have made. Discard Changes restores the previous values for all the items. Load Optimal Default loads the factory default values for all the items. Users Manual 46 W07I98M-RTC1 FCC regulatory statements, notices and warning IMPOTANT SAR INFORMATION Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the FCC of USA. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *
Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when worn on the body, as described in this user guide, is 0.529 W/Kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Part 15 Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulations. These limits are designed to provide reasonable protection Users Manual 47 W07I98M-RTC1 against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
. Relocate this device
. Increase the separation between the device and the receiver
. Connect the device into an outlet on a circuit different from that of other electronics. Consult the dealer or an experienced radio technician for help. FCC Radiation Exposure Statement Important Note: To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located or operating in conjunction with any other transmitter. Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Users Manual 48