all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 1.64 MiB | ||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info |
1 2 3 | User Manual | Users Manual | 1.64 MiB |
NAUTIZ X4 Manual
. NAUTIZ X4 Manual CONTENTS [REFERENCE : THE BOOKMARK IS NOT CLEARLY DEFINED YET]
1. 2. 3. 4. INTRODUCTION 4 Trademarks 4 About the NAUTIZ X4 Handy Terminal 4 Accessories 5 SAFETY REGULATIONS HW 5 General Safety Rules 6 2.1. Power Supply 6 2.2. Laser Safety 6 2.3. 2.4. LED Safety 8 FCC RF Exposure 8 2.5. CB Scheme 8 2.6. FCC Part 15 Regulation 8 2.7. 2.8. Canadian Compliance 8 Radio Compliance 9 2.9. WEEE Compliance 10 2.10. 2.11. China Compliance 10 GETTING STARTED 11 Install the Battery 11 3.1. 3.2. Charge the Batteries 12 LED Indicators 13 3.3. Guidelines for Battery Pack Use and Disposal 13 3.4. Turn Your Device On 14 3.5. 3.6. Desktop 14 Indicator Icons 15 3.7. Using the Stylus 16 3.8. Selecting Program 16 3.9. 3.10. Pop-Up Menus 16 Using Windows Explorer 16 3.11. GET TO KNOW YOUR DEVICE 17 4.1. Feature of Your Device 17 NAUTIZ X4 Handy Terminal 17 4.2. Front Panel Layout 17 4.3. Display Backlight 19 4.4. 4.5. Keypad Backlight 20 Using Screen Protectors 20 4.6. Installing Your Screen Protector 20 4.7. Back Panel Layout 23 4.8. 4.9. Left Side Panel Layout 24 Installing Memory Cards 25 4.10. Right Side Panel Layout 26 4.11. Top Panel Layout 26 4.12. 4.13. Bottom Panel Layout 27 Peripherals and Accessories 28 4.14. USB ActiveSync Cable 28 4.15. Li-ion Battery Packs 28 4.16. 4.17. Battery Power 28 Main Battery Pack 28 4.18. 1 handheld NAUTIZ X4 Manual 5. 6. 7. 8. 9. 4.19. 4.20. 4.21. 4.22. 4.23. 4.24. Managing Main Battery Power 29 Resetting the Terminal 30 Suspend Mode 30 Memory Allocation 31 Care and Cleaning of the Products 31 NAUTIZ X4 Technical Specifications 31 USING THE KEYPAD 32 5.1. Numeric Keypad Layout 33 Navigation Keys 33 5.2. Basic Keys 33 5.3. Alpha/Numeric Modes 34 5.4. 5.5. Alpha Indicators on the Numeric Keys 34 BLUE Key Combinations ! . 5.6. 5.7. Program Buttons 35 USING THE IMAGE ENGINE 35 Overview 35 6.1. Available Image Engines 36 6.2. 6.3. Depth of Field 36 Supported Bar Code Symbologies 37 6.4. Activating the Engine 38 6.5. Using Demos 38 6.6. 6.7. Decoding 39 To Decode a Bar Code 38 6.8. Sample Bar Codes 39 6.9. Omni-Directional Scanning Positions 39 6.10. 6.11. Capturing Images (IT5300SR Engine Only) 39 USING THE LASER ENGINE 39 7.1. Overview 39 Available Laser Engines 40 7.2. Depth of Field 40 7.3. Supported Bar Code Symbologies 40 7.4. 7.5. Activating the Engine 41 Using Demos 41 7.6. Decoding a Bar Code 41 7.7. Sample Bar Code 41 7.8. 7.9. Scanning Positions 42 USING SCANWEDGE 42 Overview 42 8.1. 8.2. Enabling ScanWedge 42 USING CONTROL PANEL 43 9.1. System Properties 43 General 43 9.2. Memory 43 9.3. Device name 43 9.4. 9.5. Copyrights 43 Power properties 43 9.6. 9.7. Battery tab 43 2 handheld NAUTIZ X4 Manual 9.8. 9.9. 9.10. 9.11. 9.12. 9.13. 9.14. 9.15. 9.16. 9.17. 9.18. Power off tab 44 CPU Power Setting Tab 45 Alerts Tab 45 Wakeup Source Tab 45 Program Button properties 45 Program Buttons Tab 46 Key define Tab 46 Backlight Properties 46 Battery power Tab 47 External power Tab 47 Keyboard backlight Tab 48 10. COMMUNICATION 49 Communication Options 49 Installing Additional Software 50 Connecting the USB ActiveSync Cable 50 ActiveSync Communication 51 Communication Type 51 Hardware Requirements for Setup 53 Software Requirements for Communication 51 Setting Up the Host Workstation 51 Communicating with the Handy Terminal 52 Synchronizing with the Host Workstation 52 Exploring the Terminal from the Workstation 53 Adding Programs via ActiveSync 54 Wireless Radios 54 Connecting the Terminal to a Wireless Network 54 WLAN (802.11b/g/n Radio) 55 Adding Programs from the Internet 55 10.1. 10.2. 10.3. 10.4. 10.5. 10.6. 10.7. 10.8. 10.9. 10.10. 10.11. 10.12. 10.13. 10.14. 10.15. 10.16. 11. WLAN CLIENT 55 Enabling the WLAN Radio 55 Establishing a Connection 56 Using the Scan feature 56 11.1. 11.2. 11.3. 12. BLUETOOTH HANDLER 55 Enabling the Bluetooth Radio 55 Connecting to Other Devices 56 Pairing Bluetooth Devices 56 Setting Up a Bluetooth Printer 56 12.1. 12.2. 12.3. 12.4. 13. SINGLE SLOT DOCKING CRADLE/SINGLE SLOT ETHERNET CRADLE DEVICE 56 Overview 56 Battery Charging 57 Power Supply 57 Front Panel 57 Back Panel 58 Powering the Single Slot Docking Cradle or Single Slot Ethernet Cradle Device 59 Charging theBattery 59 Technical Specifications 59 13.1. 13.2. 13.3. 13.4. 13.5. 13.6. 13.7. 13.8. 3 handheld NAUTIZ X4 Manual 1. Introduction Thank you for purchasing NAUTIZ X4 handy terminal. This manual generally provides you with the safety information and basic features and operations of the NAUTIZ X4 device. Please read all safety precautions and this manual carefully before using your handy terminals and peripherals to ensure safe and proper use. Trademarks The official name of Windows XP is Microsoft Windows XP Operating System. The official name of Windows Vista is Microsoft Windows Vista Operating System. The official name of Windows 7 is Microsoft Windows 7 Operating System. Microsoft, Windows, Windows Embedded Handheld 6.5 Pro, ActiveSync, and the brand names and product names of other Microsoft products are trademarks of Microsoft Corporation in the US and other countries. Other company and product names given in this manual or displayed in this software may be the trademarks of their respective companies. About the NAUTIZ X4 Handy Terminal The new NAUTIZ X4 is the latest generation handy terminal device, combining a pocket sized rugged form factor built on Microsoft Windows Embedded Handheld 6.5 Pro operating system. The NAUTIZ X4 is designed for retail warehousing and logistics applications where maximum performance and durability is required in compact handheld device. The NAUTIZ X4 handy terminal is available in different types depending on the options. Types :
1. 14244-GSM : 1D/2D, GSM/UMTS, Numeric/Qwerty Key 2. 14244-GSM-R : 1D/2D, GSM/UMTS, Numeric/Qwerty Key, RFID 3. 14244-CDMA : 1D/2D, CDMA, Numeric/Qwerty Key Configuration of Part Name :
Model name XXX NX4 Scanner option phone option Keypad option XX X X
-
-
RFID option
-
-
X
- 1D-N4313 G-GSM N-Numeric
- R-RFID
-
-
-
Language option X E-English
- 2D-N5603 C-CDMA Q-Qwerty
- 0-not install
- G-German
-
-
-
-
-
-
-
-
F-French I-Italian
- S-Spanish 4 handheld NAUTIZ X4 Manual Accessories P/N Description Standard battery NX4-1004 NX4-1007 Homebase office docking station (Single Slot Cradle) NX4-1008 Ethernet base (Single Ethernet Cradle) Quad Battery Charger NX4-1015 Micro-usb cable NX4-1010 AC adapter NX4-1005 Handstrap NX4-1023 Wrist Lanyard NX4-1024 NX4-1011 Stylus and tether q Cradles (including DC 5V 4A Adaptor) Single Slot Cradle Single Ethernet Cradle q Batteries 4000mAh Battery Pack, Standard Capacity q Power Supply AC Adaptor, INPUT: AC100~240V 50/60Hz, OUTPUT: DC5V 1.8A with MicroUSB type q Cables MicroUSB ActiveSync Cable q Others Stylus Pen and tether Wrist Lanyard Handstrap NAUTIZ X4 handy terminal contains the following items basically:
Handy terminal MicroUSB ActiveSync Cable 5V/1.8A AC Adaptor with MicroUSB type AC Plugs Battery Pack Stylus Pen and tether Wirst Lanyard Handstrap LCD Screen Protection Film Quick Start Guide NOTE: Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is NOTE: Rechargeable battery packs are not initially charged or discharged. Before you begin to use, you must charge the battery packs first. See not covered under the warranty Paragraph 3.2. 2. Safety Regulations Symbols in this manual 5 handheld NAUTIZ X4 Manual In this manual, some important items are described with the symbols shown below. Be sure to read these items before using this equipment. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate serious injury, or serious damage, or fire in the equipment or surrounding objects. injury, partial damage to the equipment or surrounding objects, or loss of data. NOTE Indicates information to which you should pay attention when operating the equipment. This section outlines the safety precautions associated with using NAUTIZ X4 handy terminal. NOTE: NAUTIZ X4 handy terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to read this manual carefully before performing any type of connection to the handy terminal and operate them according to the agency guidelines described in the manual. 2.1. General Safety Rules CAUTION Use only the components supplied by the manufacturer for the specific NAUTIZ X4 being used. Do not attempt to disassemble the NAUTIZ X4 handy terminal, as it does not contain parts that can be repaired by the user. Any tampering will invalidate the warranty. When replacing the battery pack or at the end of the operative life of the NAUTIZ X4 handy terminal, disposal must be performed in compliance with the laws in force in your country. Before using the devices and the battery packs, read this manual carefully. Do not submerge the NAUTIZ X4 handy terminal in liquid products. 2.2. Power Supply The power supply for this device has met applicable KCC/CCC safety requirements. Please adhere to the following safety instructions per UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. WARNING DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. Use only Handheld-approved power supply. Use of a non-Handheld-approved power supply may be dangerous and the warranty does not cover damage to the device caused by non-Handheld-approved power supply. The package includes international AC plugs. The AC plugs must be plugged in the power supply before the power supply itself is plugged on the wall outlet. The power supply is intended to be correctly oriented in a vertical or horizontal or floor mount position. Laser Safety 2.3. CAUTION 6 handheld NAUTIZ X4 Manual A Class 2 laser is safe because the blink reflex limit the exposure to no more than 0.25 seconds. It only applies to visible-
light lasers (400700 nm). Class-2 lasers are limited to 1mW continuous wave, or more if the emission time is less than 0.25 seconds or if the light is not spatially coherent. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even though reflective surfaces such as mirrors, etc. The laser light is visible to the human eye and is emitted from the window indicated in the figure. Laser output window Laser Light Label IMEI label LED window Camera window S/N label
(Model If the above laser light label is attached to your device, it indicates the product contains a laser engine or laser aimer that emits the laser light. The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of NAUTIZ X4 handy terminal. Laser Safety Statement This product has been tested in accordance with and complies with CDRH 21 CFR 1040.10 and 1040.11 and IEC 60825-
1 Ed 2 (2007) except for deviations pursuant to Laser Notice No 50, dated June 24, 2007. LASER LIGHT. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCTS. 1 mW MAX OUTPUT: 650nm. For installation, use and maintenance, it is not necessary to open the device. WARNING: Do not attempt to open or otherwise service any components in the optics cavity. Opening or servicing any part of the optics cavity by unauthorized personnel may violate laser safety regulations. The optics system is a factory only repair item. WARNING: Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light. 7 handheld This device complies with CB Scheme IEC 60950-1 NAUTIZ X4 Manual WARNING: Use of optical systems with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes, eye glasses and magnifying glasses. LED Safety 2.4. The LED output on this device has met IEC62471 LED safety and certified to be under the limits of a CLASS 1 LED product. 2.5. FCC RF Exposure This device complies with FCC RF exposure guidelines set forth for an uncontrolled environment. For body worn operation, this device has been tested and meets the RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on. 2.6. CB Scheme 2.7. FCC Part 15 Regulation Pursuant to part 15 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by Handheld could void your authority to operate the NAUTIZ X4 handy terminal. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. To maintain compliance with FCC RF exposure guidelines for body-worn operation, do not use accessories that contain metallic components. Canadian Compliance 2.8. 8 handheld NAUTIZ X4 Manual This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Body-worn operation, This device was tested for typical body-worn operations with the back of the phone kept 1.5cm between the users body and the back of the phone. To comply with IC RF exposure requirements, a minimum separation distance of 1.5cm must be maintained between your body and the back of the phone. Do not use third-party belt-clips, holsters, and similar accessories containing metallic components. Body-worn accessories that cannot maintain 1.5cm separation distance between the users body and the back of the phone, and have not been tested for typical body-worn operations, may not comply with IC RF exposure limits and should be avoided. Le prsent metteur radio a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-
dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Port prs du corps : cet appareil a t test pour un fonctionnement normal du tlphone port prs du corps, c'est--dire avec un espace d'1.5 cm laiss entre l'arrire du tlphone et le corps de l'utilisateur. Pour se conformer aux exigences d'exposition aux RF de la norme IC, une distance minimale d'1.5 cm doit tre maintenue entre le corps et l'arrire du tlphone. N'utilisez pas de pinces pour ceinture, d'tuis et autres accessoires tiers similaires contenant des composants mtalliques. 2.9. Radio Compliance NAUTIZ X4 RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC). 9 handheld NAUTIZ X4 Manual This device is marked with in accordance with the Class II product requirements specified in the ordance with the Class II product requirements specified in the R&TTE Directive, 1999/5/EC. The device is intended for use throughout the European Community; PAN European R&TTE Directive, 1999/5/EC. The device is intended for use throughout the European Community; PAN European R&TTE Directive, 1999/5/EC. The device is intended for use throughout the European Community; PAN European Frequency Range: 2.402 ~ 2.480 GHz. Restrictions for use in France are as follows:
are as follows:
Indoor use: maximum power (EIRP*) of 100 mW for the entire 2.400 ~ 2.4835 GHz Indoor use: maximum power (EIRP*) of 100 mW for the entire 2.400 ~ 2.4835 GHz Indoor use: maximum power (EIRP*) of 100 mW for the entire 2.400 ~ 2.4835 GHz Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400 ~ 2.454 GHz band and maximum power (EIRP*) Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400 ~ 2.454 GHz band and maximum power (EIRP*) Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400 ~ 2.454 GHz band and maximum power (EIRP*) of 10 mW for the 2.454 ~ 2.483 GHz band. of 10 mW for the 2.454 ~ 2.483 GHz band. The CE mark on the device indicates that the system has been tested to and confirm with the provisions noted the device indicates that the system has been tested to and confirm with the provisions noted the device indicates that the system has been tested to and confirm with the provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/EC Low Voltage Directive within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/EC Low Voltage Directive within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/EC Low Voltage Directive, 1999/5/EC (R&TTE), and 2011/65/EU (RoHS) 1999/5/EC (R&TTE), and 2011/65/EU (RoHS). Handheld shall not be responsible for use of our product with equipment (i.e., power supplies, personal shall not be responsible for use of our product with equipment (i.e., power supplies, personal shall not be responsible for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. 2.10. WWAN In radio systems configured with mobile computers and In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum requirem frequencies are correctly set to be compliant with the spectrum requirements of the country. The Radio modules used in ents of the country. The Radio modules used in this product automatically adapt to the frequencies set by the system and do not require any parameter settings this product automatically adapt to the frequencies set by the system and do not require any parameter settings this product automatically adapt to the frequencies set by the system and do not require any parameter settings .The TYPE field shows the correspondence between field shows the correspondence between NAUTIZ X4 types and radio modules:
HSPA+
HSPA+, or Evolved High-Speed Packet Access, is a technical standard for wireless, broadband telecommunication. HSPA+
Speed Packet Access, is a technical standard for wireless, broadband telecommunication. HSPA+
Speed Packet Access, is a technical standard for wireless, broadband telecommunication. HSPA+
enhances the widely used WCDMA (UMTS) based 3G networks with higher speeds for the end user. enhances the widely used WCDMA (UMTS) based 3G networks with higher speeds for the end user. enhances the widely used WCDMA (UMTS) based 3G networks with higher speeds for the end user. 2.11. WEEE Compliance WEEE Compliance dance with the European Commission Directive 2012/19/EU of the European Parliament 12/19/EU of the European Parliament Information for the user in accordance with the European Commission Directive 20 and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE) and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE) This product has required the extraction and use of natural resources for its This product has required the extraction and use of natural resources for its production. It may contain hazardous production. It may contain hazardous substances that could impact health and the environment, if not properly disposed. In order to avoid the dissemination of substances that could impact health and the environment, if not properly disposed. In order to avoid the dissemination of substances that could impact health and the environment, if not properly disposed. In order to avoid the dissemination of those substances in our environment and diminish the pressure on the natural resources, we encour those substances in our environment and diminish the pressure on the natural resources, we encour those substances in our environment and diminish the pressure on the natural resources, we encourage you to reuse, If the product is disposed according to the Directive, it will recycle and recover the product. If the product is disposed according to the Directive, it will If the product is disposed according to the Directive, it will avoid potentially negative consequences to the environment and human health which otherwise could be caused by incorrect disposal consequences to the environment and human health which otherwise could be caused by incorrect disposal consequences to the environment and human health which otherwise could be caused by incorrect disposal. The product marked with crossed out wheeled bin must be disposed separately from municipal waste. ct marked with crossed out wheeled bin must be disposed separately from municipal waste. ct marked with crossed out wheeled bin must be disposed separately from municipal waste. For more detailed information about disposal, reuse, and recycle system, contact your local or regional waste For more detailed information about disposal, reuse, and recycle system, contact your local or regional waste administration. 10 handheld NAUTIZ X4 Manual 3. Getting Started 3.1. Install the Battery The HANDY TERMINAL is shipped with the battery packaged separate from the unit. Follow the steps below to install the battery. 1. Remove the battery compartment door by moving the doors locks right and lifting up the bottom of door. Recess of hanging Battery door lock 2. Insert the battery well with the battery cells facing top. 1 3. Replace the battery door to start from bottom to top doors lock downwards. 2 1 2 11 handheld NAUTIZ X4 Manual NOTE: Two points of Battery guide stopper must be pertinently inserted to rear cover battery guide stopper hole NOTE: The battery door must be installed prior to booting the unit. WARNING: Use only Handheld-approved Li-Ion battery packs. Unauthorized battery may result in damage not covered by the warranty. 3.2. Charge the Batteries Handy Terminals ship with only main battery pack significantly charged of power. Charge the main battery pack with the Handy Terminal charging cable for a minimum of 4 or 6 hours depending on your battery before initial use. 1. Attach the appropriate plug adapter to the plug of the power cable. 2. Insert the plug into the appropriate power source. Plug the Handy Terminal power cable into the USB Jack on the side end of the unit. WARNING: Use only Handheld-approved peripherals, power cables, and power adapters. Unauthorized peripherals, cables, or power adapters may cause batteries to explode or damage your device. DO NOT attempt to charge damp/wet handy terminals or batteries. All components must be dry before connecting to an external power source. Batteries must be charged at a temperature ranging from 0~45 (3). If you dont follow the guide, it might have a harmful effect on the battery life. CAUTION: After the battery has been charged, disconnect the DC Power Jack from the terminal. If you stay on that plug in use, it is possible to break the power code. NOTE: Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge them. NOTE: If you remove the battery pack or it completely discharges, you have 30 minute window of time to insert a charged battery pack before the battery completely discharges. 12 handheld NAUTIZ X4 Manual 3.3. LED Indicators The red LED is ON while charging the battery and the green LED is ON when the battery is fully charged. Alternatively, it is also possible to recharge the battery pack by using the single slot cradle, the single Ethernet cradle or the 4-slot battery charger. During the charging process the LED positioned at the upper side of the display is red constant. Once the charging process has been completed this LED is green constant. If the battery pack is removed from the handy terminal, it can be recharged by inserting it into the rear slot of the single slot cradle, the single Ethernet cradle or the 4-slot battery charger. 3.4. Guidelines for Battery Pack Use and Disposal The following are general guidelines for the safe use and disposal of batteries:
Standard batteries must be charged at a temperature ranging from 0 to 45(3). Store the terminal and the spare batteries between 20 to 30 C (68 to 86 F) in order to maintain optimal battery performance. The battery level may not be displayed correctly for some minutes after the disconnection if the handy terminal is disconnected from power supply before the charging cycle is completed. The handy terminal could get warm during charging. This is normal and does not mean a malfunction. To achieve the best battery life, turn off the radios not in use. Rechargeable battery packs is not initially charged. Therefore the initial operation to perform is to charge them. See below. By default, the battery pack is disconnected at the factory to avoid damage due to excessive draining. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. WARNING: DO NOT attempt to charge damp/wet handy terminals or batteries. All components must be dry before connecting to an external power source. WARNING: Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines. WARNING: Storage of batteries for long time at fully charged status or at fully discharged status should be avoided. Only in case of long storage, in order to avoid deep discharge of the battery, it's recommended to partially recharge the battery every two-
three months to keep the charge status at a medium level. WARNING: Installing, charging and/or any other action should be done by authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion. Do not place the battery pack in or near a fire or heat; do not place the battery pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot weather; do not place the battery pack in microwave ovens, dryer, high pressure containers, on induction cookware or similar device. Doing so may cause the battery pack to generate heat, explode or ignite. Using the battery pack in this manner may also result in a loss of performance and a shortened life expectancy. Use only a Handheld approved power supply. The use of an alternative power supply will void the product warranty, may cause product damage and may cause heat, explode or ignite. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Do not use the battery pack in any other manner outside its intended use in Handy Terminal and peripherals. 13 handheld NAUTIZ X4 Manual WARNING Do not short-circuit the battery pack contacts connecting the positive terminal and negative terminal. This might happen, for example, when you carry a spare battery pack in your pocket or purse; accidental shortcircuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the contacts of the battery pack (these look like metal strips on the battery pack). Shortcircuiting the terminals may damage the battery pack or the connecting object. Do not apply voltages to the battery pack contacts. Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts or shocks. Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on a hard surface, you should take it to the nearest Authorised Repair Centre for inspection before continuing to use it. Do not replace the battery pack when the device is turned on. Do not remove or damage the battery packs label. Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised. Collect and recycle waste batteries separately from the device in comply with European Directive 2006/66/EC, 2011/65/EU, 2012/19/EU and subsequent modifications, US and China regulatory and others laws and regulations about environment. NOTE: In order to guarantee an adequate operating autonomy, when replacing the battery pack the handy terminal checks the battery energy level. If the battery is not sufficiently charged, handy terminal does not turn on. In this case, either substitute the battery pack with a charged one (sufficiently charged) or insert handy terminal into a powered cradle or plug it into the direct power supply. 3.5. Turn Your Device On If you apply the power to your device, it turns on by itself. Do NOT press any keys or interrupt while turning on process. When the process is complete, the Desktop appears, and the terminal is ready for use. 3.6. Desktop NOTE: You can access the Desktop any time by tapping the Change Views icon in the command bar and selecting Desktop on the popup menu Tap the touch screen once to zoon in the upper menu 14 handheld NAUTIZ X4 Manual 3.7. Indicator Icons The command bar, located at the upper of application screens, provides access to many system functions and programs. Icons 15 handheld Meaning Open the start menu Access the Wireless Manager Open the Scanner option menu Indicates the Keypad value Shows phone signal mode Shows the volume Indicates the Battery Control Panel (CPL) Indicates Clock & Alarm CPL zoom in/ out NAUTIZ X4 Manual Access the Bluetooth radio Left and right arrows are used to scroll through additional icons Icon Meaning Indicates AC connection mode Indicates WAN (Phone) connection mode Indicates Sound connection mode Indicates LAN / Bluetooth mode Indicates Keypad mode Using the Stylus 3.8. The terminal comes with a stylus included in a loop on the Lanyard. Use this stylus (or your finger) to select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the same as a click. Tap Drag Tap & hold Tap the touch screen once to open menu items and select options. Hold the stylus on the screen and drag across the screen to select text and images. Tap and hold the stylus on an item and a pop-up menu appears. On the pop-up menu, tap the action of the task you want to perform. WARNING: Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and may cause damage not covered by the warranty. Selecting Program 3.9. Tap Start -> Programs. To open a program, tap the icon on the menu. 3.10. Pop-Up Menus You can quickly choose an action for an item using the pop-up menus. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2. Lift the stylus and tap the action you want to perform. The contents of pop-up menus change according to the program you are using. 3.11. Use Windows Explorer to navigate through the files on your system. Start menu -> File explorer Using Windows Explorer Move files by tapping and holding on the file, and then tapping Cut, Copy or Paste on the pop-up menus that appear. 16 handheld NAUTIZ X4 Manual 4. Get to Know Your Device Feature of Your Device 4.1. The following list outlines a few of the feature included in your device. 4.2. NAUTIZ X4 Handy Terminal Operating Systems: Microsoft Windows Embedded Handheld 6.5 Pro Micro Processor: Cortex-A8 1GHz RAM Memory: 512MB FLASH Memory: 1GB 3.5 VGA Display: 480x640 Transmissive TFT Resistive Industrial Grade Touch Screen Keyboards: Numeric, Qwerty Micro SDHC Expansion Memory Card Interface: Support up to 32 GB Power Supply : MicroUSB power adaptor Interfaces : Micro-USB connector : USB 2.0 High Speed HandyLink connector: USB 2.0 High speed Client, Host (USB Host for Ethernet Cradle), Charging Scan Engine:
1D engine: N4313 2D engine: N560X Battery: Li-ion battery, 3.7V/4000mAh/14.8Wh IP65 certified enclosures Audio: Integral Microphone, Earpiece, Loud, Speaker, 3.5pi 4pole Jack for Ear-Mic headset BT: Bluetooth Radio 2.1+EDR with Internal Antenna WLAN: 802.11 b/g/n Radio with Internal Antenna Notification LEDs 1) Power indications, 2) Scan reading indications & OS notifications Notification Camera flash Sensors Acceleration sensor Vibration
: 5M pixel Light/Proximity
:
P/N : NX4-1DGN-0-E/
2DGN-R-E/ NX4-2DGN-0-
GSM/GPRS/EDGE :
UMTS/HSPA+: Five P/N : NX4-1DCN-0-E CDMA : Dual Band, US GPS: Standalone and 4.3. Front Panel Light/Proximity sensor 17 handheld Motor CMOS camera with AutoFocus and LED sensor and NX4-2DGQ-R-E/ NX4-2DGQ-0-E/ NX4-
E Quad band, 850/900/1800/1900MHz band, 800/850/900/1900/2100MHz 800/1900MHz Assisted GPS Layout LED Touch screen display NAUTIZ X4 Manual LED Indicator Shows the information needed to operate your device as follows:
Note: The LED is user-programmable. LED Color Meaning Red Lights when main battery is charging. Receiver Scan key Keyboard
(33-key numeric) Blinks, when the battery is very low (<10%), Lights when the battery is low (<20%), Blinks as Red/ Green by turns when it is no battery or not recognized Lights when the PDA resets Lights when main battery charging has completed. Blinks as Red / Green by turns when it is no battery or not recognized Green Blue Lights when a scan Pass Lights when PDA wakes up Red Lights when a scan fails Lights when PDA suspends Keypad 18 handheld NAUTIZ X4 Manual 33 numeric keypad (includes side scan and volume, power button). 55 qwerty keypad (includes side scan and volume, power button). Microphone The integrated microphone can be used for audio recording and phone call. Touch Screen Display The display is a LCD (Liquid Crystal Display) with a Capacity touch screen. The 3.5 VGA (Video Graphic Array) is transmissive active matrix color and backlit. The resolution is 480 x 640; see Display Backlight on paragraph 4.4. For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends on which one is most appropriate for your application. While there is a great deal of variation in different applications, you generally achieve greater accuracy with the stylus for buttons or icons that are close together. WARNING: Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and may cause damage not covered by the warranty. 4.4. Display Backlight The intensity of the backlight of the touch screen display may be changed, and the backlight may be programmed to turn off after the terminal has been idle for a specified period of time. To adjust the intensity of the backlight while on battery power, tap Start -> Settings -> System -> Backlight. Screen Backlight - Battery/External Power Move the slider to adjust the screen backlight while on battery power. You may turn the screen backlight off if the device is not used for a designated period of time by checking the option and designating the desired time period. You may also turn on the screen backlight when a button is pressed or the screen is tapped by selecting the appropriate checkbox. NOTE: Using the backlight option while on battery power substantially reduces battery life. You may make the same changes when on external power by tapping the External tab. 19 handheld NAUTIZ X4 Manual 4.5. Keypad Backlight To turn on the keypad backlight, check the checkbox. The duration of backlight of keypad synchronizes with LCD backlights. 20 handheld 4.6. Using Screen Protectors Handheld defines proper use of the terminal touch panel display as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel. Handheld also mandates use of the proper stylus, which is one that has a stylus tip radius of no less than 0.8mm. Use of the stylus included with the terminal is recommended at all times. 4.7. Installing Your Screen Protector When installing a screen protector, use a flat plastic card (e.g., credit card) to apply the screen protector smoothly and remove any air bubbles. 1. Press the Power key to put the terminal in suspend mode. 2. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth, Make sure nothing is on the touch panel. 3. Blue tag with backing film: Peel off this mask before application. NAUTIZ X4 Manual 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel. NOTE: To reposition the screen protector, lift up gently and reapply. 5. Yellow tag with cover film:
Please peel off this mask after application completed. 6. Press gently but firmly. Use the card a necessary to smooth out any air pockets or bumps after allocation 21 handheld NAUTIZ X4 Manual 7. Press the Power key to weak the terminal and check the touch panel with the stylus. 8. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector. 9. Press the Power key to put the terminal back in suspend mode. 10. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 11. Press the Power key to wake the terminal again. 12. For maximum performance, recalibrate the screen Tap Start > Settings > System > Screen 13. Tap Recalibrate the follow the instructions on the screen. 22 handheld NAUTIZ X4 Manual 4.8. Back Panel Layout Speaker Battery cover Lanyard mount hole Wire spring mount hole LED window Camera window The HANDY TERMIANL comes with Wrist Lanyard. You can attach it to the device. The HANDY TERMIANL comes with Hand strap. You can attach it to the device. Wrist Lanyard Hand strap Finger Saddle This is a slightly depressed and angled area of the back housing that is designed to cradle or saddle your finger while holding the terminal. This unique ergonomic design makes the terminal comfortable to hold and helps prevent you from accidentally dropping the terminal. Installed Battery For information about installing the battery, see Install the Battery on paragraph 3.1. For information about battery power, see Battery Power on paragraph 4.17. 23 handheld NAUTIZ X4 Manual Speaker The integrated speaker sounds audio signals as you scan bar code labels and enter data, but emits no ambient noise on system activity (i.e., processor, memory access, radio traffic, etc.). The speaker can also be used for playing sounds (e.g., WAV or MP3 files). The speaker meets the following SPL levels at 10cm:
500Hz80dB 1kHz90dB 4kHz90dB Stylus and tether HANDY TERMINAL is shipped with a stylus inserted in a loop on the tether. Store the stylus in the Lanyard when youre not using it; see Using the Stylus on paragraph 3.8. Left Side Panel Layout 4.9. Volume Up/Down button SCAN button Side Button You can set the volume using the Volume Button and scan using the Scan button. 4.10. Installing Memory Cards The HANDY TERMINAL supports Micro Secure Digital (SD) memory cards up to 32GB. Sandisk, Kingstone and ATP micro SD recommended To access the Micro SD card slot and insert the card, proceed as follows:
1. Press the Power key to put the terminal in Suspend Mode; see Suspend Mode on paragraph 4.23. 2. Remove the battery door on the back of the unit. 3. Remove the battery and open 4. Insert the SD card with the label facing upward. NOTE: To remove an installed SD card, tap on the edge lightly to unlock the card; the card will pop out just enough for you to grab its edge and 5. Tap the Power key to resume operation. 24 handheld pull it out. NAUTIZ X4 Manual 6. To verify that the operating system recognizes the new memory card, open Windows Explorer and navigate to My Device\Storage Card. WARNING: Follow proper ESD precautions to avoid damaging the SD. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it. Do not use the Micro SD card slot for any other accessories. It is highly recommended to lock the card holder even if the card is not present. 4.11. Right Side Panel Layout Ear jack socket Function button Scan button Side Button You can use the Programs Buttons option in the Control Panel to change the functionality of the side buttons. Scan function is assigned by default (Scan button). 3.5pi 4pole Jack. This connector supports Ear-Mic headset 4.12. Top Panel Layout EarJack Image engine window (with engine) Image Engine Window 25 handheld NAUTIZ X4 Manual The angled image engine reads and decodes most popular bar code symbolizes. For more information, see Using the Image Engine on paragraph 6. 4.13. Bottom Panel Layout I/O connector HandyLink Connector USB port The HandyLink mechanical connector is designed to work exclusively with HANDY TERMINAL peripherals and cables. This connector powers the terminal, charges the main battery, and facilitates communication. This connector supports High speed USB 2.0 communication (up to 480 Mbps) Through this connector, you can communicate with a host workstation via Microsoft ActiveSync; see ActiveSync Communication on paragraph 10.4 The I/O connector supports the following signals:
Pin Description Direction DC IN +5V DC IN +5V NC GND USB Host +5V Enable USB Host D+
USB Host D-
USB Host Detect GND NC GND GND CRADLE Detect USB Client D+
USB Client D-
USB Client +5V 26 handheld IN IN OUT IN/OUT IN/OUT IN IN IN/OUT IN/OUT IN NAUTIZ X4 Manual NOTE: Signals referenced are for a DTE device. USB Port This connector supports High speed USB 2.0 communication (up to 480 Mbps) Also external power from the MicroUSB Adaptor that is included with the terminal. When connected to the Handy Terminal MicroUSB Adaptor, the terminal is powered and the main battery pack is charging. 4.14. Peripherals and Accessories The following items are sold separately and enhance your HANDY TERMINALs capabilities. Single Slot Cradle This charging and communication cradle supports USB, enabling your terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base, its battery pack charges in five hours for the standard capacity 4000mAh pack. For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12. Single Ethernet Cradle The Single Ethernet cradle is used to charge the battery, to power the battery charging system in the terminal, and can be used to communicate data from the terminal to a PC/laptop via the Ethernet port. For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12. 4.15. USB ActiveSync Cable The MicroUSB ActiveSync Cable is used when communicating between the terminal and a host computer to transfer data via the USB interface. 4.16. Li-ion Battery Packs The Li-ion battery pack provides the main power supply for the terminal. 4.17. Battery Power The intelligent battery technology inside the terminal features of battery power:
The battery pack The battery works to prevent data loss when the terminal is used over long periods of time. The battery must be charged to full capacity before using the HANDY TERMINAL for the first time!
Charge the main battery pack with the Handy Terminal charging cable for a minimum of 5 hours depending on your battery before initial use. 27 handheld NAUTIZ X4 Manual 4.18. Main Battery Pack There are two Li-ion battery packs available for the HANDY TERMINAL:
Standard Capacity: Li-ion 3.7V/4000mAh/14.8Wh The Li-ion battery pack is the primary power source for the Handy Terminal as well as for the internal backup battery. Changing the Main Battery Pack Before installing a battery pack, press the Power key to put the terminal in Suspend Mode so that operations are suspended before removing the main power source. Always put the terminal in Suspend Mode prior to changing the battery. The HANDY TERMINAL is shipped with the battery separate from the unit. You will need to loosen the Lanyard, remove the battery door, insert the battery, and replace the battery door. NOTE: The battery door must be installed prior to booting the unit. 4 1 2 Main battery pack 3 Charging Options When the battery is installed in the terminal, you can use any of the peripherals listed below to charge the battery. AC Power Supply to USB Port direct. 28 handheld NAUTIZ X4 Manual Single slot docking cradle/Single slot Ethernet cradle Insert the battery in the spare battery charging well in the back of either the Handy Terminal slot cradle or Handy Terminal Ethernet cradle. Charging Time The standard capacity 4000mAh Li-ion battery pack requires five hours to charge to full capacity. 4.19. Managing Main Battery Power must replace the discharged battery with a fully charged battery or apply AC power to the terminal. Data and files saved on the Handy Terminal may be stored in RAM memory; therefore, maintain a continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the Handy Terminal. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and begin recharging the battery. NOTE: If the main battery is low and the terminal is in Suspend Mode, pressing the Power button does not wake the HANDY TERMINAL; you Checking Battery Power Tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge status of the main battery NOTE: You can also check battery power by tapping Start -> Settings -> System -> Power. 4.20. Resetting the Terminal There are three types of system resets: a Soft Reset, a Hard Reset, or a Factory Reset. The soft and hard resets preserve all data stored in the file system. 29 handheld NAUTIZ X4 Manual Soft Reset (Warm Boot) A soft reset re-boots the terminal without losing RAM data, terminates all running applications, reloads the OS, and launches Autoinstall, which re-initializes any CAB or REG files in \AutoInstall\Cabfile folder. You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making changes to certain system settings, or 4) to install new CAB or REG files. To perform a Soft Reset:
1. Press the Power button for 3 seconds and choose the Soft Reset on the power menu . 2. When the reset is complete, the Desktop appears. Hard Reset (Cold Boot) CAUTION: A hard reset erases all of the data and applications stored in RAM memory, reloads the OS, and launches Autoinstall, which installs any CAB or REG files in the \AutoInstall\Cabfile. Hard resets automatically launch a soft reset as part of the boot process if there are CAB files present. To Perform a Hard Reset:
1. Press the Power button for 3 seconds and choose the Hard Reset on the power menu. 2. When the reset is complete, the Desktop appears. To perform a Hard Reset if the terminal has stopped responding, press and hold the Power button for 8 seconds until the terminal starts to re-boot. CAUTION: To prevent data loss, back up all user data to an SD card or external memory device before performing an upgrade or factory reset. Factory Reset To Perform a Factory Reset:
1. Perform a Hard Reset 2. The terminal will reboot automatically and you will see first booting screen 3. Press 1277 when version information is displayed and then you will enter bootloader menu. 4. Press 12 to perform a factory reset. 5. When the clean boot is completed, do a touch calibration. 4.21. Suspend Mode Suspend Mode suspends terminal operation. The terminal appears to be off when in Suspend Mode. The terminal is programmed to go into Suspend Mode automatically when inactive for a specified period of time. You can set this time period in the Power setting. To suspend and resume operation, press the Power button. You may also press the front Scan key to wake a suspended device unless the battery door has been removed and replaced. 30 handheld NAUTIZ X4 Manual 4.18. NOTE: You should always put the terminal in Suspend Mode when you change the battery pack; see Changing the Battery Pack on paragraph Troubleshooting Suspend/Resume If the terminal does not wake when you press the Power button, the main battery might be too low to resume operation. To check, remove the battery and install a fully charged battery or connect the terminal to a Handy Terminal charging peripheral. 4.22. Memory Allocation You can verify file storage and program memory in System Properties. 1. Tap Start -> Settings -> System -> Memory tab. 4.23. Care and Cleaning of the Products When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. 4.24. NAUTIZ X4 Technical Specifications Model NAUTIZ X4 Operating System Microsoft Windows Embedded Handheld 6.5 Pro Application Software Tools and Demos Processor Memory Cortex-A8 1GHz 512MB RAM X 1GB Flash Storage Expansion User accessible Micro SD memory card slot. 3.5 in. transmissive active matrix 65K color LCD with backlight, VGA (480 x 640) 1D engine: N4313 2D engine : N560x Numeric , Qwerty Built-in microphone and speaker High speed USB 2.0 from cradle (or I/O cable) Display Scan Engine Keypad Audio I/O 31 handheld NAUTIZ X4 Manual Battery Standard Li-ion battery 3.7V / 4000 mAh / 14.8 Wh Expected Hours of Operation 8.5+ hours (with scan and continuously transmitting if using new standard Li-ion battery) Charging 5V input through MicroUSB port. Expected Charge Time Standard Capacity: 4000mAh approx. 5 hours Charging Peripherals MicroUSB Adaptor Single Slot cradlesingle-bay terminal charge/communicate Single Ethernet cradlesingle-bay terminal charge/communication base
(Via Ethernet connection) Quad Battery Charger WPAN WLAN WLAN Security WWAN GPS Operating Temperature Charging Temperature Bluetooth Class II (10 m) v2.1 Enhanced Data Rate (EDR) with internal antenna. Dual Mode 802.11 b/g/n (11 Mbps/54 Mbps) with internal antenna Wi-Fi Certified, 802.1X, WPA2, EAP, WEP, LEAP, TKIP, MSD, EAP-TLS, EAP-TTLS, WPAPSK, PEAP, CCXv4 P/N : NX4-1DGN-0-E/ NX4-2DGQ-R-E/ NX4-2DGQ-0-E / NX4-2DGN-R-E/ NX4-2DGN-0-E GSM/CDMA : Quad band, 850/900/1800/1900MHz UMTS/HSPA+: Five band, 800/850/900/1900/2100MHz P/N : NX4-1DCN-0-E CDMA : Dual Band,US 800/1900MHz Standalone and Assisted GPS
-20 to 55C 0~45 (3)) Storage Temperature
-25C to 70C 95% humidity, non-condensing High impact resistant PC/ABS housings Magnesium alloy internal chassis with component shock mounts 1.22m multiple drops to concrete, MIL-STD-810G, Method 516.6, Procedure 3.3 ft (1.0m) tumbles (500 drops) Air: 15kV Direct: 8kV Independently certified to meet IP65 standards for moisture and particle resistance H; 157.4mm x W; 74.2mm x L; 25.8mm(top) 1) 1D ; 348g 5g (with Accessaries) 2) 2D ; 352g 5g (with Accessaries) Humidity Construction Drop Tumble ESD Environmental Dimensions Weight 32 handheld NAUTIZ X4 Manual Scanner / Decode Capabilities 1D Laser model: N4313 laser engine. Decodes all standard 1D codes. 2D engine model: N560X 2D Imager. Decodes all standard 1D, 2D, Postal, and OCR codes. 5. Using the Keypad 5.1. Numeric Keypad Layout Scan key Keyboard
(29-key numeric) 5.2. Navigation Keys Located in the center of the keypad for easy access with either hand, the navigation keys enable you to move the cursor up and down lines and from character to character. 5.3. Basic Keys Name Function BLUE(ALPHA) Toggles the keypad between alpha (upper and lowercase) and numeric modes. Indicator changes accordingly on the command bar. Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Window Shows the start menu directly. Begin dialing. Start an action. Hang up. Cancels an action. Performs the same function as the Enter key on a workstation. Send End Enter 33 handheld NAUTIZ X4 Manual Power Scan Space Suspends and resumes the terminal. Activates the image engine to scan a bar code or take an image. Moves the cursor one space forward. If you are typing text, it moves the text one space forward as well. Alpha/Numeric Modes 5.4. The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric and alpha modes. Pressing the ALPHA key once locks the keypad in numeric mode, alpha mode (lowercase), or alpha mode (uppercase). The command bar on the screen displays an icon that indicates the alpha/numeric status of the keypad. Icon Keypad Status Lowercase alpha mode. Uppercase alpha mode. Numeric mode. 5.5. White Indicators on the Numeric Keys
(Please refer to Handheld Keyboard Specification v1.5 document) The mode is changed as Numeric / Upper / Lower when you press the white key, you can type each number/ capital letter/small letter in the sequence Each number key display the characters typed when you press that key in alpha mode. Note that when typing in alpha mode, you must use the same multi-press method you would use when typing letters on a phone keypad. Each key press types the next letter in the sequence as displayed by the alpha indicator. 5.6. Program Buttons Buttons can be programmed to execute different functions using the Program Button program in the Control Panel. The following buttons on the HANDY TERMINAL are programmed for the listed function. Key Combination Function 34 handheld NAUTIZ X4 Manual FSCAN LSCAN RSCAN F1 F2 F3 F4 SPACE STARTMENU BACK SPACE ENTER VOL+
VOL-
CAMERA BACKLIGHT VIBRATOR LOCK Do Scan Do Scan Do Scan No Action No Action No Action No Action Space Start Menu Key Bksp Key Return Key Volume up Volume down Camera Backlight Vibrator Lock 6. Using the Image Engine 6.1. Overview The HANDY TERMINAL contains an N560X 2D image engine that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding or a N4313 1D laser engine that reads all popular 1D bar codes. The image engine can also capture digital images, such as signatures and pictures. NOTE: It may not read the barcode due to specular reflection if scanning from directly above. Try again after changing angle. NOTE: It may not read the barcode, if this handy terminal is too close to or too far from the barcode even if the barcode is within the aiming range. Move the handy terminal toward or away from the barcode slowly and try again. The aiming range is for reference only. NOTE: It may not read the barcode if the barcode surface is curved. Scan the barcode at the center of the aiming range. NOTE: It may not read the barcode if the barcode surface is dirty. Try again after cleaning the barcode. NOTE: It may not read the barcode if the image engine window is dirty. Try again after wiping the window with a cotton swab or similar soft object gently. NOTE: It may not read the barcode according to the direct sunlight or the brightness of the surrounding. Try again away from the direct sunlight. Try again after adjusting the brightness of the surrounding if indoors. 35 handheld It may not read the barcode if it is black on silver background. Try again after changing angle or adjusting the brightness of after changing angle or adjusting the brightness of NAUTIZ X4 Manual NOTE: It may not read the barcode if it is blue on white background. Try again after changing angle or adjusting the brightness of It may not read the barcode if it is blue on white background. Try again after changing angle or adjusting the brightness of It may not read the barcode if it is blue on white background. Try again after changing angle or adjusting the brightness of the surrounding. NOTE: It may not read the barcode if it is black on silver background. Try again the surrounding. NOTE: Bar codes printed on glossy or laminated paper are best read at angles greater than 5 prevents bright illumination reflections from being prevents bright illumination reflections from being returned to the Laser Engine.. NOTE: Performance may be impacted by bar code quality and environmental conditions Performance may be impacted by bar code quality and environmental conditions NOTE: Misreading may occur, if the bar code isnt positioned correctly. Recommended scanner beam positions are as follows Misreading may occur, if the bar code isnt positioned correctly. Recommended scanner beam positions are as follows Misreading may occur, if the bar code isnt positioned correctly. Recommended scanner beam positions are as follows Bar codes printed on glossy or laminated paper are best read at angles greater than 5 in relation to the Laser Engine. This in relation to the Laser Engine. This 6.2. Available Image Engines Image Engines The HANDY TERMINAL is equipped with a The HANDY TERMINAL is equipped with an N560X. 6.3. Depth of Field Depth of Field for N560X 36 handheld NAUTIZ X4 Manual NOTE: Test Condition: Room Temperature (Approx. 23C), 0 Lux. New picture : N5600-IM Rev E.pdf base. 6.4. Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies 37 handheld Codabar Code 11 Code 128 Code 39 MSI Trioptic Code Code 32 Pharmaceutical (PARAF) Matrix 2 of 5 Telepen GS1-128 ISBT 128 Straight 2 of 5 (Industrial) UPC-A (Coupon Code) UPC-E1 Straight 2 of 5 (IATA) NAUTIZ X4 Manual 2D Symbologies Composite Codes OCR Postal Codes Code 93 / 93i EAN-8 EAN-13 Interleaved 2 of 5 Reduced Space Symbology UPC-A UPC-E Aztec Code Data Matrix MaxiCode MicroPDF417 PDF417 QR Code and Micro QR Code Han Xin EAN.UCC Composite Codablock F TCIF Linked Code 39 (TLC39) OCR Postnet British Post(BPO) Canadian Post Australian Post Japanese Post Planet Code KIX (Netherlands) Post China Post Korea Post 4-CB(4-State Customer Barcode) ID-Tag(UPU 4-State) 6.5. Activating the Engine When a scanning application is open, press the Scan key to activate the image engine. 6.6. Using Demos Handy Terminal Demos are software utilities loaded on all Handy Terminal terminals that demonstrate the advanced features of the terminal. There are two Demos that feature the image engine: Image Demo and Scan Demo. To access these demos, tap Start -> Demos. Select Scan Demo to verify decoding, or Select Image Demo to verify imaging (not available on device using the N4313 laser engine). 38 handheld NAUTIZ X4 Manual Decoding 6.7. The Handy Terminal supports Full-area Imaging decode mode. area Imaging decode mode. Full-area Imaging area imaging the Handy Terminal supports omni-directional aiming meaning that a With full-area imaging the Handy Terminal supports omni obtained from many positions. For details, see Omni obtained from many positions. For details, see Omni-Directional Scanning Positions on 6.8. To Decode a Bar Code To Decode a Bar Code Directional Scanning Positions on paragraph 6.10. directional aiming meaning that a positive read can be 1. Tap Start -> Demos -> Scan Demo. 2. Position the Handy Terminal over one of the 2. Position the Handy Terminal over one of the Sample Bar Codes on paragraph 6.9. A range of 410 inches (1025 cm) from the bar code is recommended. 25 cm) from the bar code is recommended. 3. Project the aiming brackets by pressing and holding the 3. Project the aiming brackets by pressing and holding the Scan key. The Scan LED lights red. 4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve 4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve 4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve optimal decoding; Omni-Directional Scanning Positions Directional Scanning Positions on paragraph 6.10. 5. When the bar code is successfully decoded, the decode LED 5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps. lights green and the terminal beeps. 6.9. Sample Bar Codes Sample Bar Codes You can use the following bar codes to verify decoding:
You can use the following bar codes to verify decoding:
Code 39 Code 39 PDF 417 6.10. Omni-Directional Scanning Positions Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. aiming pattern frames the bar code to provide you with the best scanning performance. aiming pattern frames the bar code to provide you with the best scanning performance. NOTE: To achieve the best read, the aiming beam should be centered horizontally across the bar code. To achieve the best read, the aiming beam should be centered horizontally across the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil size) should be read farther from the unit. il size) should be read farther from the unit. 39 handheld NAUTIZ X4 Manual 6.11. Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image. This is normal; the captured image has a higher resolution. File Formats The Handy Terminal supports BMP file format only. 7. Using the Laser Engine 7.1. Overview The HANDY TERMINAL (N4313 laser version) contains a laser diode that emits a beam toward an oscillating mirror that scans through the code and the reflected light is bounced off of two mirrors back to the collector. The laser version reads all popular 1D bar codes. See Overview on paragraph 6.1 also. NOTE: Performance may be impacted by bar code quality and environmental conditions. 7.2. Available Laser Engines The HANDY TERMINAL can be equipped with an N4313 laser engine (depending on the configuration purchased). 7.3. Depth of Field Depth of Field for N4313 Near Distance
(in/cm) 5in / 12.7cm 4.1in / 11.7cm 4.1in / 10.4cm 3.4in / 8.7cm 1.9in / 4.7cm 1.9in / 4.7cm Reference Range Far Distance
(in/cm) 5.4in / 13.8cm 7.2in / 18.4cm 10.7in / 27.4cm 14.5in / 36.9cm 16.8in / 42.8cm 19.9in / 50.4cm Code Size Code 39 4 mil Code 39 5 mil Code 39 7.5 mil Cede 39 10 mil UPC 13 mil, 100%
Code 39 15 mil 40 handheld NAUTIZ X4 Manual Code 39 20 mil Code 39 40 mil
(*)
(*) 25.5in / 64.6cm 26.7in / 67.5cm 31.8in / 80.8cm
(*) Code 39 55 mil NOTE: Test Condition: Room Temperature(Approx. 20C), 450 ~ 500 Lux. NOTE: * = dependent on width of bar code. 7.4. Supported Bar Code Symbologies Symbology Type 1D Symbologies Symbology Name Codabar Code 39 Interleaved 2of 5 Nec 2of5 Code 93 Straight 2of5 Industrial Straight 2 of 5 IATA Matrix 2 of 5 Code 11 Code 128 GS1 128 Telepen UPC A UPC E EAN 13 EAN 8 MSI Plessey GS1 Databar Omnidirectional GS1 Databar Limited) GS1 Databar (Expanded China Post Trioptic 7.5. Activating the Engine When a scanning application is open, press the Scan key to activate the laser engine. 7.6. Using Demos Handy Terminal Demos are software utilities loaded on Handy Terminals that demonstrate the advanced features of the terminal. To access these demos, tap Start > Demos. Select Scan Demo to verify decoding Decoding a Bar Code 7.7. 1. Tap Start > Demos > Scan Demo. 2. Position the Handy Terminal over one of the Sample Bar Codes on paragraph 7.8. A range of 4-10 inches (10-25 cm) from the bar code is recommended. 3. Project the aiming beam by pressing and holding the Scan key. The Scan LED lights red. 4. Center the aimer beam horizontally over the bar code and highlight all of the vertical bars of the bar code. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements
(mil size) should be read farther from the unit. 41 handheld NAUTIZ X4 Manual 5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps. 7.8. Sample Bar Code You can use the following bar code to verify decoding:
7.9. Scanning Positions The aiming beam must be aimed across the entire bar code to provide you with the best scanning performance. The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil size) should be read farther from the unit. 8. Using ScanWedge 8.1. Overview ScanWedge sends data from the installed scan engine(N4313 or N560X) to the foreground application as keystrokes or clipboard. The foreground application is the open software application whose window is currently active on the display. As a result, you can check decoded bar code data with Microsoft WordPad. 8.2. Enabling ScanWedge ScanWedge is enabled by default in Handy Terminal Tap the ScanWedge icon once Command Bar Menu
. ScanWedge initializes and enables. Tap icon in taskbar to open the command bar menu. 42 handheld NAUTIZ X4 Manual Menu Item Sub Item This item Enables and disables the audio notification for decode/data reception. There is one sound for success and another sound for an error. Enables and disables LED notification for decode/data reception. Enables and disables Vibrator notification for decode/data reception. Specifies the method to use when sending the decoded message to the foreground application Send decoded bar code data as Keyboard event(stroke) Send decoded bar code data to clipboard(copy & paste) Add nothing at end of decoded bar code data Add CRLF at end of decoded bar code data Add Space at end of decoded bar code data Add Tab at end of decoded bar code data Enable Auto Scan feature Enable Continuous Scan feature Open Scanner setting applet Disable Scanner trigger Close Scan wedge Notification Result Type Terminator Beep LED Vibrator Keyboard Event Clipboard None CRLF Space Tab Auto Scan Continuous Scan Setting Disable Scanner Close 9. Using Control Panel
-
-
-
-
-
9.1. System Properties Refer to the System control panel for information related to the system. 43 handheld NAUTIZ X4 Manual 9.1.1. Version 1. Select 2. Start > Settings > System > About > Version tab to determine the following information about your PDA:
Operating system Processor Memory Expansion slot 9.1.2. Device ID Your device uses this information to identify itself to other computers. Terminal Serial Number will be in Device Name section by default. You can modify it 9.1.3. Copyrights Portions of this software are based on NCSA Mosaic. 44 handheld NAUTIZ X4 Manual 9.2. Power properties 9.2.1. Battery tab To see main battery level indicators open Start > Settings > System > Power icon . Set up the USB charging and On / Off Advanced tab 9.2.2. To adjust power management settings, 1. Set idle time when on battery power before device suspends. 2. Set idle time when on external power before device suspends. 3. To exit, press OK from the command bar, or press the < ENT > key on the keypad. NOTE: To save battery life it is recommended to set idle time as short as possible. CPU Power Tab 9.2.3. To adjust CPU power settings, 1. Auto Power : Enable automatically CPU power control to maximize battery life. 2. Manual Power : CPU Clock can be fixed by User. 45 handheld NAUTIZ X4 Manual Alerts Tab 9.2.4. Adjust the level of main battery for Low battery message and Critical battery message. By default, 20% is set for Low battery message and 10% is set for Critical battery message. Wakeup Source Tab 9.2.5. Enable Wake(Resume) resources from suspend(Sleep) mode By default, all available resources are enabled. Battery Info Tab 9.2.6. To see battery information, Start > Settings > System > Power icon> Battery Info Tab Indicate Capacities, Voltage, Estimated time, Serial number etc. 9.3. Program Button properties 9.3.1. 1. Select Program Buttons Tab Start > Settings > Control Panel > Program buttons 2. Chose its type:
Default button will be assigned default function. No function button does not have any functions. Scan key button is used as Scan key. Application click on Open button and select application to bind with this key. 4. To exit, press OK from the command bar, or press the Key define Tab
< ENT > key on the keypad 9.3.2. Apply and Set the key which is already defined 46 handheld Up/Down Control Tab NAUTIZ X4 Manual 9.3.3. Customize the way the Up/Down control repeats Delay before first repeat (Short/Long) Repeat rate (Slow/Fast) NOTE: It is useful for a customer to want to remap keyboard. 9.4. Backlight Properties Modify display and keyboard backlight brightness. Also set backlight options (i.e. turn off time). To modify backlight settings open:
Start > Settings > Control Panel > Backlight 9.4.1. Modify display backlight settings when device runs on batteries. Battery power Tab Set display brightness level Set backlight timeout time. Available options:
10 sec 30 sec (by default) 1 min 2 min 3 min 4 min 47 handheld NAUTIZ X4 Manual 5 min Enable to turn on backlight when a button is pressed or the screen is tapped NOTE: To extend battery life it is recommended to set display backlight turn off time as short as possible. NOTE: To extend battery life it is recommended to set display backlight brightness level as low as possible. 9.4.2. Modify display backlight settings when device runs on external power. External power Tab Set display brightness level Set backlight timeout time. Available options:
Unchecked (By default) 1 min 2 min 5 min 10 min 15 min 30 min Enable to turn on backlight when a button is pressed or the screen is tapped Keyboard backlight Tab 9.4.3. Enable Keyboard backlight when button is pressed By default this is turned off. Scanner Settings 9.5. To change the Scanner configuration parameter as follows:
Tap the Scanwedge icon in the System Tray to open the menu shown in image on the right and select Settings to open the Scanner Settings applet or Start > Settings > System > Scanner Settings 48 handheld NAUTIZ X4 Manual 49 handheld NAUTIZ X4 Manual 9.5.1. Scanner Settings Applet Tab Section Option Description Trigger timeout (sec) Enable Auto Scan Specifies the trigger time out in seconds. If a barcode is not decoded within the specified timeout, the default Notifier indicates that decoding is failed Enable Auto Scan with specified interval. Auto Scan interval (sec) Set Auto Scan interval time. Continuous Scan Enable Center Window
(IT5300SR device only) Enable Continuous Scan without any interval. Enable Center window. Bar codes are decoded only if they are within the specified windows Decode Mode(IT5300SR device only) Standard:
Quick Omni (By default):
Delay Before Decoding(IT5300SR only) device Start to decoding after specified milliseconds Values: 0(default), 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000 User Message Terminator Power Save Mode Select Result Type User Message Keyboard Event Clipboard(default) Select the desired barcode end method from the pull down list. Values: None, CRLF, Space, Tab Select Power Save Mode OFF SLEEP HIBERNATE(default) Power Save TimeOut
(sec) 1~65535 Volume Good read Bad read Enable Good read Set sounds volume. Set sound to indicate good read. Set sound to indicate bad read. Enable visual scan indicators. Set vibration time after good read. Scanning Basic Wedge mode Power Save Options
(N4313 device only) Beep If enabled plays audio sound LED Vibrator Notification 50 handheld NAUTIZ X4 Manual If enabled
- Turn on LED for good/bad scan indicator Barcode ID Bad read Transmit Barcode ID Wedge Label Prefix Suffix Set vibration time after bad read. Enable to transmit predefined barcode ID in Detail tab Enter Prefix to be sent prior to the decoded/received data. Enter Suffix to be sent after the decoded/received data Symbologies Select barcode types you want to read There is Enable All and Disable All to enable/disable all symbologies Tab Section Option Description Enable this code Barcode ID Details Specifies or enable available detail settings in symbologies Length Redundancy(N4313 only) device Tap/enable this checkbox to enable the selected bar code type. Enter the desired features you wish to transmit as bar code ID Set the minimum and maximum lengths from the pull-down lists. If the numbers are the same, acceptable bar codes will only be that length. Not all types will have this option enabled. If you are encountering errors when reading some bar codes, you may want to adjust the redundancy count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code Specifies Barcode engine type, Firmware revision, Decider revision, API revision About Load Factory Default After modifying the current settings, if you wish to return to the factory defaults, tap the Load Factory Default button. 51 handheld NAUTIZ X4 Manual 10. Communication 10.1. Communication Options Handy Terminal offers several communication options including Microsoft ActiveSync and wireless radios. USB Connector The MicroUSB connector on bottom side supports USB 2.0 High speed HandyLink Connector (Wired Communication) The mechanical connector on the bottom panel connects the terminal to various Handy Terminal communication peripherals that connect to a host workstation via USB (1.1 or higher), thus enabling ActiveSync communication. For more information, see ActiveSync Communication on paragraph 10.4. Wireless Radios (Wireless Communication) HANDY TERMINALs can be equipped with an 802.11b/g/n Bluetooth radio and WWAN. For more information, see Wireless Radios on paragraph 10.14. 10.2. Installing Additional Software Handy Terminal is shipped with the operating system, radio drivers, and custom software (CICO) already installed. These are the default programs that install when your terminal first boots up. You can install additional software programs on the terminal provided that the following parameters are met:
The software program was created for a Windows CE device. The terminal has enough memory to store and run the program. The program has an EXE, CAB, or DLL extension. When selecting programs, verify that the program and version of the program are designed for the Windows Embedded Handheld 6.5 Pro and the terminals processor. You can verify your processor by tapping Start -> Settings -> System ->
About -> Version tab. Make a note of the information in the Processor field. To install additional software, you can use the communication options described in this chapter. Adding Programs via ActiveSync (paragraph 10.13). Adding Programs from the Internet (paragraph 10.17). 10.3. Connecting the USB ActiveSync Cable To facilitate USB communication between the Handy Terminal and the host workstation, you may connect your unit to a host by using either the USB ActiveSync cable, the optional Single Slot Docking Cradle or the optional Single Slot Ethernet Cradle. If you use the Communication Cable, slide the cable unit onto the bottom of the terminal lining up the terminals micro-USB connector with the cable units connector. 52 handheld NAUTIZ X4 Manual 10.4. ActiveSync Communication To synchronize, ActiveSync 4.1 or higher must be installed and configured for the appropriate communication type on the host workstation and the Handy Terminal. Handy Terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Handy Terminal to the host workstation (via Handy Terminal peripheral) to initiate communication. NOTE: You can download the most current version of ActiveSync (for Windows XP) or Windows Mobile Device Center (Windows Vista, 7) from www.microsoft.com. WARNING: When communicating via ActiveSync, your terminal is designed to be connected to the host workstation with a Handheld communication peripheral. We recommend use of Handheld peripherals, power cables, and power adapters. Use of any non-Handheld peripherals, cables, or power adapters may cause damage not covered by the warranty. 10.5. Communication Type The HANDY TERMINAL supports the following type of communication via ActiveSync through its I/O connector on the bottom panel:
USB The USB cable and hardware peripherals allow the Handy Terminal to communicate with a workstation through a USB port or to a network through a USB hub. The Handy Terminal supports high-speed USB communication (USB 2.0); maximum data transfer rate is 480 Mbps. The Handy Terminal defaults to USB communication out of the box. 10.6. Hardware Requirements for Setup AC Adaptor (if needed) USB ActiveSync Cable (for USB communication) ActiveSync v4.1 or higher (for Windows XP), Windows Mobile Device Center (for Vista and Windows 7) installed on the host workstation Windows XP, Windows Vista, Windows 7 computer. 53 handheld NAUTIZ X4 Manual 10.7. Software Requirements for Communication To sync successfully, ActiveSync must be configured for the same communication type on both the host workstation and the Handy Terminal. ActiveSync must be setup on your workstation before you initiate synchronization from the terminal for the first time. 10.8. Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by selecting File -> Connection Settings. For USB communication, check Allow USB connections. 10.9. Communicating with the Handy Terminal After setting up both the workstation and the terminal, ActiveSync connection should be automatic. 1. Connect the Handy Terminal to a communication peripheral, such as the Handy Terminal Docking cradle. 2. The Handy Terminal automatically opens ActiveSync or Windows Mobile Device Center to establish a connection. 10.10. Synchronizing with the Host Workstation After setup, synchronization begins automatically whenever the terminals mechanical connector connects to a Handy Terminal peripheral that is connected to a host workstation with ActiveSync installed. 10.11. Exploring the Terminal from the Workstation When the terminal and desktop computer are connected, open the main ActiveSync window (on the desktop), and click Explore. The Mobile Device folder opens in Windows Explorer. 54 handheld NAUTIZ X4 Manual The Handy Terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive. 10.12. Adding Programs via ActiveSync WARNING: When selecting programs, verify that the program and version of the program are designed for the Windows Embedded Handheld 6.5 Pro and the terminals processor. You can verify your processor by tapping Start -> Settings -> System -> About -> Version tab. Make a note of the information in the Processor field. Generally, software for Windows Embedded Handheld 6.5 Pro devices must be installed to the host workstation first, then transferred to the Handy Terminal. 1. Download the program to the workstation from either the Internet or the install CD. You may see a single *.exe or setup.exe file, a *.cab file, or *.dll. (There may also be several versions of files for different device types and processors.) 2. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 3. Connect the terminal to the workstation via a Handy Terminal communication peripheral. If the File is an Installer An installer program is one that installs to the workstation and the terminal simultaneously; one process installs to both devices. 1. On the workstation, the *.exe or *.setup.exe file. The installation wizard begins. 2. Follow the directions on the workstation screen. The installation process includes transferring the software to the terminal via ActiveSync. If the File is Not an Installer Some programs cannot be installed on workstations because they are designed exclusively for Windows Embedded Handheld 6.5 Pro devices. In these cases, the appropriate files must be stored on the host workstation and transferred to the terminal via ActiveSync Explore. NOTE: If an error message stating that the program is valid but designed for a different type of computer appears when you try to install the program on the workstation, the program is not an installer. 1. If you cannot find any installation instructions for the program in the Read Me file or documentation, open ActiveSync or Windows Mobile Device Center on the workstation and click Explore. 2. On the workstation, navigate to the workstation folder containing the program file(s) and copy them to the Program Files folder on the terminal. If you want the program to persist through hard resets, save the program to the Autoinstall \ Cabfile folder(\AutoInstall\Cabfile). 3. On the terminal Desktop, File Explorer in Windows Menu navigate to the folder where the program is located. 4. Tap on the program file to install it. If you copied the file to the Autoinstall\Cabfile folder, you can choose to install the program by performing a hard reset. The program installs as part of initialization. 55 handheld NAUTIZ X4 Manual 5. After installation is complete, access the program by tapping Start -> Programs, and the program appears on the Programs screen. Tap the icon to open the program. 10.13. Wireless Radios There are four radio options: 802.11b/g/n Bluetooth, Phone and GPS. 1. 802.11 b/g/n (WLAN configuration): Integrated Wi-Fi (802.11b/g/n Radio), up to 72.2Mbps 2. Bluetooth (WPAN configuration): Integrated Bluetooth v2.1+EDR 3. Phone (WWAN configuration): 3G WWAN HSPA+Module 4. GPS: Module inherent to HSPA+ Module NOTE: NAUTIZ X4 does not provide all Bluetooth profiles. 10.14. Connecting the Terminal to a Wireless Network You connect the terminal to a wireless network through the on-board radio (802.11b/g/n Bluetooth and/or Phone). Each radio has its own configuration program and requires specific information about the wireless network to connect. Successful connection depends on your network infrastructure about which you will need specific information from your network administrator. applet NOTE: 802.11 b/g/n radio module is off by default, in order to avoid wasting energy, you can switch it off using the Wireless Communications NOTE: Suspending the terminal powers off the 802.11 b/g/n radio and drops the radio connection. When the terminal resumes, depending on the radio power mode and security protocol selected, it may take up to 30 seconds for the 802.11 b/g/n radio drivers to re-associate the radio to the network. NOTE: Area coverage and radio performance may vary, due to environmental conditions, access points types or interference caused by other devices (microwave ovens, radio transmitters, etc.). If necessary, please turn off the WALN or Bluetooth. NOTE: Radio performance may vary if using WLAN, Bluetooths and Phone and phone imultaneously. If necessary, please turn off either WLAN or Bluetooth and/or Phone.. 10.15. WLAN (802.11 b/g/n Radio) HANDY TERMINAL has a 2.4 GHz 802.11 b/g/n WLAN (Wireless Local Area Network) radio that uses Direct Sequence Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g/n, Wi-Fi compliant products including access points (APs), workstations via PC card adapters, and other wireless portable devices. By default, the 802.11b/g/n radio is powered-off (i.e., disabled) out of the box To power it on (i.e., enable), press the vertical arrow (bottom right corner of screen) and select Turn Wireless LAN On. The enable/disable state of the radio will survive subsequent soft and hard resets. The next step is to configure the connection parameters of the radio to connect to a wireless network. Configuring the WLAN Radio The WLAN radio is configured in the Handheld WLAN Client, which you access by the program icon in the command bar. 56 handheld Adding Programs from the Internet NAUTIZ X4 Manual 10.16. When you have established a network connection (whether via Wireless LAN, Bluetooth, or activeSync), you can access the Internet and download additional software programs. When selecting programs, verify that the program and version of the program are designed for Windows Embedded Handheld 6.5 Pro and the terminals processor. You can verify your processor by tapping Start -> Settings -> Control Panel
-> System -> General tab. Make a note of the information in the Processor field. 1. Open Internet Explorer and navigate to the programs location. You may see a single *.exe or setup.exe file, or several versions of files for different device types and processors. 2. Select the program version that matches your Handy Terminal and processor. 3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 4. Download the program to the terminal directly from the Internet. You would normally store the program in the Program Files folder unless another location is required by the program. 5. On the terminal, the installer file; e.g., the *.exe file. 6. The installation wizard for the program begins. 7. Follow the directions on the screen to complete installation. 11. WLAN Client 11.1. Enabling the WLAN Radio The WLAN Driver must be enabled for the radio to transmit a signal. You cannot connect to a network unless the radio is enabled. There are two ways in order to enable WLAN Driver, Wi-Fi Turn on/off from Wireless Manager and from PWC Control. 1. Start -> Setting -> Connections -> Wireless Manager -> Select Wi-Fi. 2. Start -> PWC -> Power On button tap in Status page. 57 handheld NAUTIZ X4 Manual 11.2. Establishing a Connection 1. Tap Start -> PWC . 2. Tap the Config Tab on PWC. 3. Tap New button on top of Config Tab. 4. Type in SSID on Network Window. 5. Select a specific Security method from the drop-down list according to the Access Point(AP) 6. Select Encryption method according to Security setting 7. Tap OK after type in keys or passwords. 8. you may find SSID appears on Config Tab list. 9. Select SSID and tap Connect button. 58 handheld NAUTIZ X4 Manual 10. The Status tab appears displaying the connection status. 11.3. Using the Scan feature 1. The active Config Tab queries for AP lists for devices in range of the terminal, and AP results appears on the Scan window with SSID, Channel, Signal Strength, Flags information. 2. Tap the Access Point after youve selected an item. once you tap the Setting button, it opens the Network Window. 3. If you select Access Point from queried lists, basic Security, Encryption will fill automatically with previous set AP information. You can select/enter additional information and tap OK. 59 handheld NAUTIZ X4 Manual 12. Bluetooth Handler Bluetooth wireless technology is a short-range communications technology to connect portable and/or fixed devices while maintaining high levels of security. 12.1. Enabling the Bluetooth Radio 1. Select the device panel indicated by the UP arrow in the lower, right portion of the display. 2. Tap Turn Bluetooth On. The Bluetooth icon appears in the task bar. NOTE: In order to avoid wasting energy, the Bluetooth, module is off by default. If you need to have Bluetooth working, the module must be NOTE: Suspending the terminal powers off the Bluetooth radio and drops the Bluetooth connection. When the terminal resumes, it takes NOTE: Area coverage and Bluetooth radio performance may vary, due to environmental conditions or interference caused by other devices approximately 10 seconds for the Bluetooth radio driver to re-initialize the radio. powered on using the Wireless Communications applet.
(microwave ovens, radio transmitters, etc.). 12.2. Connecting to Other Devices Before connecting to another device, make sure that the Bluetooth connection on the other device is enabled. 1. Tap on the Bluetooth icon in the task bar. The Bluetooth Handler appears on the screen. 2. Add New Device. The available services of all devices / profiles in range display in the Bluetooth Handler. 12.3. Pairing Bluetooth Devices Connecting Bluetooth devices usually requires that they be paired; the same passkey must be entered for each device. If you want to connect the HANDY TERMINAL to a device without any input method (e.g., printers, headsets), refer to the user documentation that accompanied the device for pairing information. 1. Tap on the desired device / profile in the Bluetooth Handler. 2. Tap the Next Button on the bottom 60 handheld NAUTIZ X4 Manual Once asked if you need to authenticate the device, 3. Enter 4 random digits and tap the Next button. 4. Enter the same digits on the other device when prompted. 5. After pairing, tap on the selected device / profile and select Active. 12.4. Setting Up a Bluetooth Printer 1. Make sure that the Bluetooth printer is on and activated. 2. If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar). 3. Tap Scan Device, which runs a Bluetooth Inquiry, then SDP Query. 4. If you see your Bluetooth printer device displayed. You can press the Refresh button to search again. 13. Single Slot cradle/Single Ethernet cradle Device NOTE: The cradle is option accessory and needed to purchase separately with incidental expenses in the aftermarket 13.1. Overview NOTE: The information in this chapter applies to both the Single Slot cradle and Single Ethernet cradle devices unless otherwise indicated. As the hub of your HANDY TERMINAL system, the Single Slot cradle charging and communication cradle supports full-
speed USB 2.0 with a workstation. The Single Ethernet cradle is identical to the Single Slot cradle except it supports Ethernet communication as well as full-speed USB 2.0. 13.2. Battery Charging The base completes a full charge of the battery pack in 5 hours for the standard capacity 4000mAh pack on the handy terminal. In addition to charging, the base powers the terminals intelligent battery charging system, which protects the battery from being damaged by overcharging. The terminal senses when a battery pack is fully charged and automatically turns off the charger. If the battery voltage drops below the charge threshold, the charger turns on again to maintain the battery at full capacity. As a result, Handy Terminals may be stored in the base indefinitely without damage to the terminals, battery packs, or peripherals. For prolonged storage, see Storage Guidelines on paragraph 4.20. 13.3. Power Supply The power cable that ships with each terminal also powers the base. WARNING: We recommend use of Handheld peripherals, power cables, and power adapters. Use of any non-Handheld peripherals, cables, or power adapters may cause damage not covered by the warranty. We recommend use of Handheld Li-Ion battery packs. Use of any non-Handheld battery may damage not covered by warranty. WARNING: DO NOT attempt to charge damp/wet handy terminals or batteries. All components must be dry before connecting to an external power source. 61 handheld NAUTIZ X4 Manual 13.4. Front Panel Battery connector Charging LED I/O connector Terminal Well Place the Handy Terminal in the terminal well to communicate with a host device, power the terminal, and charge the terminals battery. Make sure that the device is securely seated. Rubber Feet The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Charging LED If the LED is red, the unit is charging; if it is green, the charge is complete. 13.5. Back Panel Single Slot Cradle Single Ethernet Cradle DC power jack Ethernet port USB port DC power jack USB port 62 handheld NAUTIZ X4 Manual DC Power Jack Connect the power cable to this power jack; see powering the Single Slot Cradle Device on paragraph 12.6. USB Port The USB port is full-speed (v2.0). Using the USB cable, you can connect the base to a USB-compliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft ActiveSync (v.4.1 or higher). For more information about ActiveSync setup, see ActiveSync Communication on paragraph 10.4. Ethernet Port (Single Ethernet cradle only) Using an Ethernet cable, you can connect the Single Ethernet cradle to an Ethernet-compliant device to facilitate Ethernet communication to and from the terminal. This equipment is for indoor use only. The communication wiring is limited to the inside of a building. 13.6. Powering the Single Slot Cradle or Single Ethernet Cradle Device The terminal requires DC 5V input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to DC 5V. Only power adapter cables from Handheld convert the voltage appropriately. The same power cable that ships with each terminal can be used to power the base. This cable contains a plug adapter for each geography (US, UK, EU, etc.). 1. Attach the appropriate plug adapter to the power adapter. 2. Plug the power cable into the power source. 3. Plug the connector into the DC power jack on the back panel. The base is now powered. When a terminal is properly seated, the base powers the terminal, charges the terminals main battery pack, and launches ActiveSync (see ActiveSync Communication on paragraph 10.4). Handheld recommends that you leave the base connected to its power source at all times, so that it is always ready to use. 13.7. Charging the Battery The base powers the terminal and fully charges the battery pack in 5 hours depending on the battery. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-
Ion batteries. 63 handheld NAUTIZ X4 Manual The process monitors changes in temperature, current, and voltage. The battery can be inserted in the battery charging well in back of the terminal connection. Angle the battery as shown. Once the connectors engage, the LED lights. If the LED is red, the unit is charging; if it is green, the charge is complete WARNING: Do not short-circuit between each contact of the cradle. It may cause fire. 13.8. 1 2 Technical Specifications for Cradle Model Structural Dimensions Weight Material Color Environmental Operating Temperature Storage Temperature Charging Temperature Electrical Static Discharge Humidity Power Supply Input (Universal)
(from the power source) 64 handheld NX4-1007 (Single Slot Cradle) NX4-1008 (Single Ethernet Cradle) 136mm(L) x 116mm(W) x 84mm(H) Single Slot cradle - 309g Single Ethernet cradle - 317g Polycarbonate Black
-20 to 55C
-25 to +70C 0~45 (3) Air:
Direct:
15kV 8 kV 95% humidity (non-condensing) AC 100240 Vac. 50/60Hz 0.9A Included with Cradle NAUTIZ X4 Manual Output (to the cradle) DC 5V , 4A Main battery: Standard Capacity:4000mAh Approx. 5hours Green: charged Red: charging MicroUSB connector supports data transmission of up to 480Mbps OR Ethernet 10/100BASE-T(support only NX4-1008) UL listed TUV licensed Power Supply compliant to FCC part 15, Class B CE Marking (EMC) CISPR Pub 22 UL 94- HB Charging Standard Charge Status LED Communication Interface Agency Approvals Power Supply Charging Fire Retardant 65 handheld
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-06-26 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 1851.25 ~ 1908.75 | PCE - PCS Licensed Transmitter held to ear |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2014-06-26
|
||||
1 2 3 | Applicant's complete, legal business name |
Handheld Group AB
|
||||
1 2 3 | FCC Registration Number (FRN) |
0020324752
|
||||
1 2 3 | Physical Address |
Kinnegatan 17, 53133
|
||||
1 2 3 |
Lidkping
|
|||||
1 2 3 |
Sweden
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
YY3
|
||||
1 2 3 | Equipment Product Code |
14244C
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J******** H****
|
||||
1 2 3 | Telephone Number |
+46 5********
|
||||
1 2 3 | Fax Number |
+46 5********
|
||||
1 2 3 |
j******@handheldgroup.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Computer | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power is conducted. This device supports bandwidth of 20MHz for 802.11n. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head and body-worn accessory are 0.21 W/kg and 0.20 W/kg. | ||||
1 2 3 | Output power is conducted. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. | |||||
1 2 3 | Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory and simultaneous transmission is 0.59 W/kg, 0.42 W/kg and 0.63 W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Korea Testing Laboratory
|
||||
1 2 3 | Name |
Y**** K****
|
||||
1 2 3 | Telephone Number |
82-2-********
|
||||
1 2 3 | Fax Number |
82-2-********
|
||||
1 2 3 |
k******@wm.ktl.re.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.0910000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0020000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 22H | 824.7 | 848.3 | 0.242 | 2.5 ppm | 1M37F9W | ||||||||||||||||||||||||||||||||||
3 | 2 | 24E | 1851.25 | 1908.75 | 0.188 | 2.5 ppm | 1M38F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC