NAUTIZ X2 QUICK START GUID Mobile Computer E 1 WHATS IN THE BOX The pictures shown below may dier from the actual products. To purchase additional or optional products, contact our customer center. 2 Nautiz X2 Main body Barcode scanne Standard battery Charging dock USB cable Adaptor 2 YOUR NAUTIZ X2 LED 2 Receiver Scanner LED Touch screen display Back Scan Task manager Home Barcode scanner window Flash Camera Battery lock Battery Power button Volume up Side scanner button Volume down Side scanner button 3 INSERT/REMOVE BATTERY To insert the battery 1. Insert the battery. 2. Slide the battery lock to the right. Battery door lock To remove the battery 1. Slide the battery lock to the left. Battery door unlock 2. Remove the battery. 4 INSERTING/EXTRACTING SIM/MICRO SD CARD This is how you insert and remove the SIM/micro SD. SIM card SD card 5 USING SCANNER USING SCANNE R Press the [Front Scan] or [Side Scan] button to start scanning. 2 Scanning Barcode To scan a barcode, keep a distance of about 10 cm between the barcode and the barcode scanner window and scan the barcode at the correct angle. 6 POWERING ON/OFF Press the [Power] button to turn the Nautiz X2 unit on/o. Power button 7 BATTERY CHARGING Use supplied power adapter or charging dock to charge the Nautiz X2. Please go to www.handheldgroup.com/knowledgebase to download more information. WIFI Operation Frequency:
Maximum Power:
5.8G SRD Operation Frequency:
Maximum Power:
BT Operation Frequency:
Maximum Power:
NFC Operation Frequency:
Maximum Power:
GSM Operation Frequency:
Maximum Power:
WCDMA Operation Frequency:
Maximum Power
(WCDMA Band 1) Maximum Power
(WCDMA Band 8):
LTE Operation Frequency:
Maximum Power(LTE Band 1):
Maximum Power(LTE Band 3):
Maximum Power(LTE Band 7):
Maximum Power(LTE Band 8):
Maximum Power(LTE Band 20):
Maximum Power(LTE Band 38):
Maximum Power(LTE Band 40):
2.4G WiFi:2412MHz~2472MHz 5G WiFi Band 1: 5180MHz ~ 5240MHz 5G WiFi Band 2: 5260MHz ~ 5320MHz 2.4GHz WiFi: 17.67dBm(E.I.R.P.) 5GHz WiFi Band 1:16.76dBm(E.I.R.P.) 5GHz WiFi Band 2:16.93dBm(E.I.R.P.) 5745MHz ~ 5825MHz 13.23dBm (E.I.R.P.) 2402~2480MHz BT4.0+EDR: 8.75dBm (E.I.R.P.) BT4.0+BLE: -3.64dBm (E.I.R.P.) 13.56MHz
-30.06dBuA/m@10m E-GSM 900: 880~915MHz DCS 1800: 1710~1785MHz E-GSM 900: 33.51dBm DCS 1800: 29.54dBm Band 1 TX:1920MHz~1980MHz,RX:2110MHz~2170MHz Band 8 TX:880MHz~915MHz, RX:925MHz~960MHz 23.47dBm 23.30dBm Band 1 TX:1920MHz ~ 1980MHz,RX:2110MHz~2170MHz Band 3 TX:1710MHz ~ 1785MHz,RX:1805MHz~1880MHz Band 7 TX:2500MHz ~ 2570MHz,RX:2620MHz~2690MHz Band 8 TX:880MHz ~ 915MHz,RX:925MHz~960MHz Band 20 TX:832MHz ~ 862MHz,RX:791MHz~821MHz Band 38 TX:2570MHz ~ 2620MHz,RX: 2570MHz ~ 2620MHz Band 40 TX:2300MHz ~ 2400MHz,RX:2300MHz ~ 2400MHz 22.69dBm 22.53dBm 22.40dBm 23.09dBm 23.49dBm 23.56dBm 23.20dBm FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to user. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Specic Absorption Rate (SAR) information:
This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm for body worn must be maintained between the users body, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Manufacturer: Handheld Group AB Address of Manufacturer: Kinnegatan 17 A S-531 33 Lidkping Sweden 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.Adapter shall be installed near the equipment and shall be easily accessible. 3.The product shall only be connected to a USB interface of version USB 2.0. 4.4.The operating temperature of the EUT cant exceed 40 and shouldnt be lower than -10. 5.Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. 6.The device complies with RF specications when the device used at 5mm from your body and 0mm from your head. 7.The UNII Band 1 indoor use only. Hereby, Handheld Group AB. declares that this Smart Device product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. Google, Google Play and other marks are trademarks of Google LLC. IC Statement This device complies with Industry Canadas licence-ex-
empt RSSs. Operation is subject to the following two conditions:
(1)This device may not cause interference;
(2)This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. l'utilisateur de The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. The device complies with RF specications when the device used at 10mm from your body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories these requirements may not comply with RF exposure requirements and should be avoided. that do not meet