ALGIZ 10X MANUAL INDEX Whats in the Box ....................................................................................................................... 4 1.IDENTIFYING ALGIZ 10X .................................................................................................... 5 Specification ......................................................................................................................... 5 System ................................................................................................................................................ 5 Display Specification ........................................................................................................................... 5 I/O Connectors.................................................................................................................................... 5 Buttons and Indicators ........................................................................................................................ 5 COM Port Assignment ......................................................................................................... 6 Boot Options ........................................................................................................................ 6 Factory Reset ....................................................................................................................... 6 Front Side ............................................................................................................................ 7 Left and Right Side .............................................................................................................. 8 Rear Side ............................................................................................................................. 9 Function Keys .................................................................................................................... 10 LED Indicators ................................................................................................................... 10 LED Term ......................................................................................................................................... 10 2. USING ALGIZ 10X ............................................................................................................ 11 AC Power ........................................................................................................................... 12 Battery Power .................................................................................................................... 12 Insertion of the Battery Pack .............................................................................................. 13 Removal of the Battery Pack ............................................................................................. 13 Charging the Battery .......................................................................................................... 14 Power Supply ..................................................................................................................... 14 Starting ALGIZ 10X ............................................................................................................ 15 Installing SIM Card, SD Card ............................................................................................. 15 3.SOFTWARE ......................................................................................................................... 16 Hot-Tab .............................................................................................................................. 17 Adjusting the LCD Brightness ............................................................................................ 17 Adjusting the Speaker Volume .......................................................................................... 17 Battery Status .................................................................................................................... 18 WWAN (LTE) - Optional..................................................................................................... 19 GPS. .............................................................................................................................. 20 Camera .............................................................................................................................. 22 External GPS Antenna ....................................................................................................... 25 System Information ............................................................................................................ 26 4.REGULATORY INFORMATION ......................................................................................... 26 FCC Compliance Statement .................................................................................................... 26 FCC Warning ........................................................................................................................... 26 FCC RF Radiation Exposure ................................................................................................... 27 Copyright Notice ...................................................................................................................... 27 Trademark Acknowledgement ................................................................................................. 27 Disclaimer 27 Customer Service .................................................................................................................... 27 Whats in the Box Item Description One 2 Cell Li-Ion Battery Pack 19V Adapter w/ standard power cord. Standardtype, 1.8M Handstrap ALGIZ 10X Quick start guide PART 1:
IDENTIFYING ALGIZ 10X Specification ALGIZ 10X is a rugged tablet PC designed for use in various challenging environments, e.g. field work, outdoor activities and construction sites. With its rugged design, ALGIZ 10X is able to withstand shocks, vibrations, high humidity as well as high/ low temperatures. System Processor BIOS Chipset Memory Intel Celeron N2930 Quad Core 1.83 GHz Processor AMI System BIOS Intel ATOM SocIntegrated SODIMM, DDR3L 16004GB LAN Controller Intel Ethernet ControllerI211-AT Storage Audio SATA interface support Mini-PCIe interface SSD 128GB Audio-out / Audio-in / Microphone-in. Internal Speaker Display Specification Size 10.1 (16:10) Resolution 1920 x 1200 Brightness 600 cd/m2 (typ.) Touch 10 points projective capacitive touch I/O Connectors LeftSide 1xDC Power Jack,1xVGA, 1Xusb 2.0,1xRS232 Right Side 1xLAN, 1xUSB 3.0, 1xMic/Audio Jack, 1xSIM Card Slot, 1xMicro SD Card Slot BottomSide Pogo-pin for docking Rear Side Service Window Buttons and Indicators Control Button Power On/Off, Menu, windows key, two programmable hotkeys LED Indicators Power Status, SSD Status, RF Device Status, Battery Status, GPS Status ALGIZ 1ALVer 3.1 5 COM Port Assignment COM1 RS232 COM2 B+ Power & UART Wafer COM3 GPS COM6 WWAN virtual COM COM7 WWAN virtual COM COM8 WWAN virtual COM COM11 Docking Station COM12 Docking Station Boot Options F1 F2 Initiatefactoryreset Enter BIOS FactoryReset The ALGIZ 10X has a built-in recovery utility that can be used to reset your computers SSD disk to its factory state. Press F1 during booting when the Handheld logo screen appears. Follow the instructions on the screen to continue with the factory reset. CAUTION: This procedure will erase all data on your disk. ALGIZ 1ALVer 3.1 6 FrontSide Ref. 1 Item Front Microphone 2 Light Sensor 3 Keypad Description Receives sound to make voice recordings. Senses the ambient light for automatic adjustment of the display backlight. The features can be enabled through the OSD Control Keypad. TheKeypad provides hotkeys with all functions including Power On/Off, Menu, programmable hotkeysand aWindows Home key 4 Speaker Front Speaker ALGIZ 1ALVer 3.1 7 Left and Right Side Ref. 1 Item DC Power Jack Description DC plug for supplying power to the device VGA For connection to external display devices such as monitors and projectors USB 2.0 Port Can be connected to USB-interface peripherals RS232 Accepts external connections using the interface of RS232 (D-sub 9 pins) Ethernet(RJ45) Port For connection to an Ethernet 10/100/1000-based network USB 3.0 Port Can be connected to any USB-interface peripherals Combo Audio Jack For connection to a set of headphones or external speakers. SIM CardSlot Accepts a SIM Card, use the WWAN feature to connect to the Internet. Micro SD CardSlot Accepts a Micro SD Card for additional features. 2 3 4 5 6 7 8 9 ALGIZ 1ALVer 3.1 8 Rear Side 1 2 ALGIZ 1ALVer 3.1 Item Description Stylus Pen Service Window User-accessiblecompartment. 9 Function Keys 1 Components Power Button*
Description Hold down for 4 seconds to turn the computer on. 2 Touch mode/lock Touch mode selection. Lock screen. 3 Menu Controls brightness, volume, battery, power to modules and system information. 4 Windows key Open start menu 5 Function keys Two programmable buttons. Press menu to configure.
* If computer does not respond you can power it off by holding down the Power Button until the LEDs are switched off. Hold down for about 10 seconds. LED Indicators LED Term Power mode Symbol Indicator Status Description Green: System is on No light: System is off or LED indicators are off in Hot-tab. Flashing green light: SSD is reading/writing data Green: Indicates that any transmitting radio is turned on.
( WWAN) Green: Full battery Red: Low battery Orange: Charging Flashing red: Running on Hot-swap battery Green: Indicates GPS power on Storage Status Radio Status Battery Status GPS Status ALGIZ 1ALVer 3.1 10 PART 2:
USING ALGIZ 10X ALGIZ 1ALVer 3.1 11 Before turning the unit on, make sure that the tablet is either connected to AC power or the battery. AC Power The ALGIZ 10X power supply is comprised of two parts, the power adapter and the battery. The power adapter converts AC power from a wall outlet to the DC power required by the ALGIZ 10X. Your ALGIZ 10X comes with a universal AC-DC adapter. That means that you may connect the power cord to any 100V-120V as well as 220V-240V outlets without using power converters. Different countries may require an adapter to be used to connect the supplied standard AC power cord to a different standard. Battery Power The ALGIZ 10X is designed to work with two types of battery. A standard battery with 5300mAh and an extended battery with double the capacity.The battery life is especially dependent on the batterys condition, tablet usage, as well as the temperature. ALGIZ 1ALVer 3.1 12 Insertion of the Battery Pack Removal of the Battery Pack ALGIZ 1ALVer 3.1 13 Charging the Battery When the power adapter is plugged in, the battery automatically recharges regardless of whether your tablet PC is in the ON or OFF mode. It takes a couple of hours for the battery to be fully charged when the power is OFF and twice as long when the tablet PC is in use. When the charger LED indicator lights up orange, charging is required. The battery is charging when the red LED is permanently on. When the LED turns OFF, the battery pack is fully charged. CAUTION: If unit is kept in storage for longer periods of time (6 months) without it being used, the hotswap battery might enter deep discharge, meaning it will no longer function as expected. To prevent this,please make sure to, every 5-6 months, equip the unit with a standard or extended battery and connect ac charger. Power it on and leave it be for atleast 2 hours to fully charge the hotswap battery. Power Supply The power for the Handheld rugged tablet PC is supplied by the power adapter and battery pack, the power rating and manufacturer information are listed as below. For safety reasons, the adapter must be connected to ground (earth). Power Adapter Manufacturer: EDAC Power Electronics Co Ltd Model: EA10633B Input Rated: 100-240Vac, 2.0A, 50-60Hz. Output Rated: DC 19V, 3.42A. Battery Pack Manufacturer: T-Gee Electronic Co., Ltd Model: ALG10X-08A Rated: 5300mAh DC 7.4V CAUTION: Do not attempt to fix or replace the battery, as this may cause an explosion! Only use the specified battery and follow the instructions in the manufacturer's user manual. ALGIZ 1ALVer 3.1 14 Starting ALGIZ 10X Press the power button for 4 seconds to power on the ALGIZ 10X. Follow the Microsoft Windows on-screen instructions to get started with Windows. Installing SIM Card, SD Card Remove the SIM/SD card cover on the right side. This cover is secured with two screws. Insert the SIM card according to the picture. Micro SD SIM Card ALGIZ 1ALVer 3.1 15 PART 3:
SOFTWARE ALGIZ 1ALVer 3.1 16 Hot-Tab ALGIZ 10X has a pre-installed control application, Hot-Tab. The control application is used to monitor and control features such as brightness, volume, battery status, power to modules and system information. The control application is accessed by pressing menu on the ALGIZ 10X. To exit Hot-Tab: Click the menu key again or click the x in the top right corner. Adjusting the LCD Brightness menu once and choosesSetting. The Brightness Control is accessed by pressing Check Auto Brightnessto activate automatic brightness. With this item checked, ALGIZ 10X will adjust the LCD brightness based on the ambient light. Adjusting the Speaker Volume ALGIZ 1ALVer 3.1 17 The Speaker Control is accessed by pressing menu->Setting. BatteryStatus The Battery status is accessed by pressing menu->Setting. The ALGIZ 10X has a replaceable Main battery as well as a second built-inhot-swap battery. The hot-swap battery will activate once the main battery is empty or unplugged. ALGIZ 1ALVer 3.1 18 WWAN (LTE) - Optional The ALGIZ 10X is prepared for WWAN (LTE) connectivity. If you have a WWAN modem installed, then navigate to the WWANby pressing menu ->Device.Check WWAN 3G/4G to turn the WWAN on/off. Note: You must install a SIM card in order for the ALGIZ 10X to access a WWAN network. ALGIZ 1ALVer 3.1 19 GPS ALGIZ 10X is equipped with a dedicated GPS receiver for optimum performance. The FunctionControl is accessed by pressing menu ->Device. Check GPSto turn the GPS receiver on. Uncheck GPS to turn it off. The GPS evaluation software, U-Center, is accessed by double-clicking the U-Center icon available on the desktop. Set the port to COM3 ALGIZ 1ALVer 3.1 20 SetBaud rateto 9600 GPS will now start looking for satellites to calculate its position. This procedure may take from a few seconds to a few minutes depending on satellite positions, interference, environmental factors and radio noise. Tip: See the U-Center manual for more information about this GPS evaluation software. ALGIZ 1ALVer 3.1 21 Camera The ALGIZ 10X has a built-in 5-megapixel camera. The FunctionControl is accessed by pressing menu ->Device. Check Camerato turn the Camera on. Uncheck Camera to turn it off. Or press menu and click the Camera icon to start the Camera. ALGIZ 1ALVer 3.1 22 In thesettings you can control the destination folder for saved pictures or videos, previews, as well as image resolution. In the settings you can control the flash light mode to on/off/auto. ALGIZ 1ALVer 3.1 23 In the settings you can control the image resolution. In thesettings you can switch to photograph or videomode. ALGIZ 1ALVer 3.1 24 In thesettings you can take a picture. External GPS Antenna The FunctionControl is accessed by pressing menu ->Device. Check External Antenna (auto)to activate an external antenna installed on the vehicle dock Alg10X-05A/05B. When this item is checked, Alg10X will automatically switch to the external antenna when the unit is docked. Do not check this item unless you have an external antenna installed on your Alg10X vehicle dock. Uncheck ExternalGPS (auto) to turn this feature off. ALGIZ 1ALVer 3.1 25 System Information Press menu ->Settingto view system information. Please have this information ready if you are contacting Handheld support. PART 4:
REGULATORY INFORMATION FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device must not cause harmful interference, and 2. This device must be able to withstand any interference received, including interference that may cause undesired operation. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorienting or relocating the receiving antenna. Increasing the distance between the equipment and the receiver. Connecting the equipment to a different outlet from that to which the receiver is connected. Consulting the dealer or an experienced radio/TV technician for help. Caution:
To comply with the limits for an FCC Class B computing device, always use the shielded signal cord supplied with this unit. The Federal Communications Commission warns that changes or modifications to the unit not ALGIZ 1ALVer 3.1 26 expressly approved by the party responsible for compliance could invalidate the users authority to operate the equipment. FCC RF Radiation Exposure This equipment complies with the FCC RF radiation exposure limits stipulated for an uncontrolled environment. This device and its antenna must not be co-located or operated in conjunction with any other antennas or transmitters. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antennas or transmitters. FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement:
This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Copyright Notice Copyright 2010 Handheld Group AB, ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Handheld Group AB reserves the right to make any product changes without notice, including to circuits and/or software described or contained in this manual, in order to improve design and/or performance. Handheld Group AB assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or mask works rights to these products and makes no representations or warranties that these products are free from patent, copyright, or mask works rights infringement, unless otherwise specified. Applications described in this manual are for illustration purposes only. Handheld Group AB makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customer Service Support is provided by Handheld. Visit our website at www.handheldgroup.com to find updated information about the product. You can also contact your distributor, sales representative or our customer support center for further assistance. If you contact our customer support center please have the following information ready before you call:
Product serial number Peripheral attachments Software (OS, version, application software, etc.) Description of complete problem The exact wording of any error messages with print screen images In addition to this, free technical support is available from our engineers during working hours. We are always ready to provide advice on application requirements or specific information about the installation and operation of any of our products. Please do not hesitate to call or e-mail us. Manufacturer: Handheld Group AB Address: Handheld Group AB, Kinnegatan 17 A, SE-531 33, Lidkping, Sweden TEL: +46 (0) 510-54 71 70 FAX: +46 (0) 510-282 05 ALGIZ 1ALVer 3.1 27