FCC ID: 2AMZY-BM3D Mini Bluetooth Speaker

Instruction Manual Product Details Product Set Up 1. Turn on the speaker by pressing the power button for 3 seconds. The speaker will have a sound prompt and the blue LED light indicator will flash. 2. Turn on second speaker and wait for sound prompt. 3. Double press the power button on one of the speakers. 4. Connection sound is heard after speakers have successfully connected. 5. After first pairing, speakers should automatically connect when you turn them both on. Product Use 1. After speakers have successfully paired together, turn on your devices Bluetooth. 2. Search for device speaker name BM3DE and click to pair your deivce to the speaker. 3. Speaker will have a sound prompt after successful connection. 4. Turn off the speaker by pressing the power button for 4 seconds. 5. Press the power button once to play/pause music. 6. Press the power button once to answer/end phone calls. Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 2 3 4 5 6 7 8 Product Specifications Power Rating: 3W Frequency Response: 20HZ-20KHZ THD: < 1%

S/N: > 80DB Speaker Parameter: 4 3W diameter 36mm Battery: 3.7V / 400mAh Product Size: 4.75 x 2 x 1.5 Product Weight: 70g 1 2 3 4 5 6 7 8 Speaker Charging Base LED Indicator Charging Indicator Micro USB Charging Port Speaker Leash Hole Power Button Microphone Product Charging 1. Insert the charging cable into the micro USB port on the product base. 2. Connect the USB plug into a power source. 3. Place speakers on charging base with metal pins properly aligned. 4. Red LED lights will turn on when speaker is charging. 5. When charging is complete, LED lights will turn off. 6. Alternativly, plug the micro USB into the bottom of the speaker to charge. 7. Speaker volume will lower when battery level is low. HPG Brands Handstands Promo LLC 1770 S 5350 W STE 100 Salt Lake City, UT 84104

(801) 727-1400 https://hpgbrands.com/handstands/

HandStandsPromo LLC 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-20-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AMZY-BM3D

[HandStandsPromo LLC] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Ce he~ Lete

(Applicant signature)

(Stefan Leimer)

HandStandsPromo LLC 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-20-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AMZY-BM3D

[HandStandsPromo LLC] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, She Li

(Applicant signature)

(Stefan Leimer)

HandStandsPromo LLC 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2AMZY-BM3D 2.911(d)(7) USA Designated Agent for Service of Process We, [HandStandsPromo LLC] (the applicant) designate [HandStandsPromo LLC

] NOTE! for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: HandStandsPromo LLC Address: 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Contact Name: Stefan Leimer Telephone No: (801) 655-3001 Email: sleimer@handstandsproducts.com FRN: 0026687244 Signature:

Date: Sep. 20, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

HandStandsPromo LLC 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Agent Authorization Company: HandStandsPromo LLC Address: 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Product Name: Mini Bluetooth Speaker Model Number(s): BM3D Product Description: Mini Bluetooth Speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023-09-25 Name:

Company: HandStandsPromo LLC Stefan Leimer

HandStandsPromo LLC 1770 South 5350 West Suite 100, Salt Lake City, Utah 84104, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-09-20 Subject; Request for Confidentiality FCC ID: 2AMZY-BM3D To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Xx!

OX In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

[_] External Photos

[_] Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR _] For 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Spipar EG Contact person: Stefan Leimer