AINANNY with Monitor USER MANUAL EN Smart baby monitor FR Babyphone intelligent ES Vigilabebs inteligente DE Intelligentes Babyphone IT Baby monitor intelligente Compatible with Amazon Alexa & Google Assistant EN 4. Connection of camera and App 5. Pairing of camera and monitor 3. Installation 6. Usage 7. FAQ Quick start guide 1. Packing list 2. Product description 1. Packing list Camera X1 Power adaptor X2 USB cable X2 Reset pin X1 Monitor X1 Bracket X1 Headgear X1 Quick guide X1 Warning sticker X2 Screws X3 2. Product description Status light Speaker Microphone SD card slot Call/Pairing Type C Reset Status light Call/Pairing Reset Blinking red light: wait for network connection (slow) connecting the network (fast) Solid blue light on: camera is working correctly Solid red light on: camera is malfunctional Press to make a call; long press to pair Press and hold for 5 seconds to reset the camera (if you have modified settings, they will return to factory defaults) EN Microphone Status light of charging Status light of using Antenna ON/OFF button Speaker Screen holder Zoom in/out Menu Direction OK Call Back SD card slot Reset Micro USB Status light Orange light: Charging of charging Green light: Fully charged Status light Yellow light: The monitor is on of using Antenna No light: The monitor is off Adjust the angle to get better signals ON/OFF button Long press 5s to turn on and turn off the monitor Zoom in/out Zoom the image in 1X, 2X or 4X On homepage, press to enter the menu interface;
On homepage, long press to enter the setting interface Direction Control the rotation directions; select the menu items Make a call after pressing the button Confirm Press to back up;
On homepage, long press to stop playing music Menu OK Call Back 3. Installation 1 Install the camera on a flat surface. 2 Use the included mounting bracket to fix the camera to a clean surface. EN 4. Connection of camera and App Connect the camera to the App The camera can be connected both to the monitor and the App. Generally, it is connected to the monitor by default. Follow the steps below to connect the camera to the App:
1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't 2. Download the corresponding App on your phone. Register a new account support 5 GHz Wi-Fi. to log in or log in directly. 3. Reset the camera using a pin until the status light is red in fast blinking.
(You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
(If you are using the monitor, the audio and video will be temporarily disconnected, and will automatically resume after the camera is successfully configured with the network. The maximum time is 2 minutes. 4. Follow the step instructions on your smart phone to add the monitor, and scan the QR code with your camera. The App is available for both iOS and Android OS. Scan the QR code or search "Arenti" at App Store and Google Play. Download and install the App at your phone.You can select the App according to needs. App Download Support EN Set up router your WiFi. The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of Please keep network available 2.4GHz 5GHz 5. Pairing of camera and monitor Power on the camera and the monitor, and they will automatically connect. If the connection fails, please follow the steps below to pair. The pairing is distance limited, so make the distance between the camera and the monitor is no more than 200m. Unbind the monitor and camera:
1. Press Menu button on the monitor screen, and select
> Camera. 2. Select Camera 1 or Camera 2 which you need to unbind. 3. Long press OK button to release the binding. Pair the monitor and camera:
1. Press Menu button on the monitor screen, and select
> Camera. 2. Select Camera 1 or Camera 2 which you need to pair. 3. Long press the camera pairing button until you hear the prompt tone. 4. Press OK button on the monitor screen to start pairing. 5. For 2 cameras, repeat step 2 ~ step 4. EN 6. Usage Note If you have addded 2 cameras, the monitor screen will display 2 live views at the same time. If you want to set parameters or enable functions of one of the cameras, you need to select the camera first. The method of camera selection is as follows:
Press the back key on the home page to enter the switch camera mode and the camera icon will flash. Press the left and right buttons to switch the camera to be controlled. Rotate the camera You can adjust the monitoring angle for a better vision. The direction buttons on the monitor screen are available when the camera is powered on. Press direction buttons to rotate the camera horizontally and vertically, for a better vision. EN Photo & video Take a photo:
take a photo. You can take a photo when you want to capture an interesting scene of baby. Press Menu button on the monitor screen, select and press OK to Record a video:
You can record a video when you want to capture a meaningful time of baby. Press Menu button on the monitor screen, select and press OK to record a video. enter the interface. View the taken photos and recorded videos:
1. Press Menu button on the monitor screen, select and press OK to 2. Select the camera and date, select the photo or video you want to view, and press OK to enter preview mode.
* For a video, press OK to play or pause in the preview mode.
* Press backup button to quit preview or return to main menu. Play music You can play music to sooth your baby when baby is crying or sleeping. There are various soft music to select. Press Menu button on the monitor screen, select and press OK to enter music interface. You can select different music, change the music cycle mode, or adjust the music volume. EN Feeding reminder Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet. 1. Press Menu button on the monitor screen, and select
> Feeding Reminder. 2. Press UP and DOWN direction buttons to select between 4 time options, and press OK to start time setting. 3. When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second and on/off; and press UP and DOWN direction buttons to change values and select on or off. 4. Press OK to save settings. 5. Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the monitor screen. Smart care You can turn on functions of motion detection, noise detection and cry detection, so that you can know the baby status immediately, no matter you are sleeping, working, cooking and so on. 1. Press Menu button on the monitor screen, and select 2. Press UP and DOWN direction buttons to select options between motion detection,
> SmartCare. noise detection, cry detection and alarm volume, and press OK to save. 3. When start to set up one detection mode, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to adjustsensitivity.
* You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity. 4. When set up the alarm volume, press LEFT and RIGHT direction 5. Press OK to save settings. 6. There will be a alarm when the set detection is triggered, press OK to buttons to adjust. stop alarm. EN Temperature and humidity detection You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures. 1. Press Menu button on the monitor screen, and select
> Temperature and humidity. 2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to startsetting. 3. Press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units. 4. Press OK to save settings. 5. In Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range. Safety Protection You can turn on or turn off the Wi-Fi network channel so that others cannot live view the videos by App if the function is off. And you can also view the visited records as all visits through the App will be recorded. Night light You can turn on night light if needed, and you you can set lighting mode and light color. Press Menu button on the monitor screen, and select
. Or press Menu button, and select setting interface.
> Light > Night light to enter the Safety Protection Night light EN General setting Set up brightness:
enter the interface. Set up time:
1. Press Menu button on the monitor screen, select and press OK to 2. Press UP and DOWN direction buttons to adjustbrightness. 1. Press Menu button on the monitor screen, and select
> Time setting. 2. Press direction buttons to change date, time and time displaying mode. 1. Press Menu button on the monitor screen, and select
>Language. Set up language:
2. Select the language you need. Set up sleep mode:
You can set up sleep mode to increase standby time. 1. Press Menu button on the monitor screen, and select 2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60
> Sleep mode. minutes or off. Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator, if you think it will affect your babys sleep. Press Menu button on the monitor screen, and select
(Or Press Menu buttonselect
> Light > Status light.) SD card:
1. Press Menu button on the monitor screen, and select
> SD card management. Then you can view the total capacity and remaining capacity of your SD card. 2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up. Upgrade:
Make sure your camera is connected to a the 2.4 GHz Wi-Fi. You can upgrade your camera when the upgrade alarm appears. Or Press Menu button on the monitor screen, and select check whether there is a upgrade.
> Device information to Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the monitor screen. Please charge the monitor as soon as possible. EN 7. FAQ Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly. Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the monitor. (To enter the pairing interface of the monitor, press Menu button on the monitor screen, and select
> Camera Management.) Q: What if the monitor screen is stuck and it doesnt work while pressing any buttons?
A: Press the reset button of your monitor with the pin, and then long press the power button of your monitor to restart it. Q: Why the camera or the monitor cannot identify the SD card?
A: Confirm whether the SD card is normal and the format is FAT32. Q: Why I cant get the notifications with my cell phone App when I connect the camera to the monitor?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened. Q: Why the monitor can't view video after the camera is connected to the App?
A: The monitor has a 2 minute interruption time when the camera is reset, and it will automatically resume after 2 minutes. If it doesnt recover, try to pair the monitor and camera again. Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-
collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 7