80*72 80mm 80mm 80mm 80mm Important Notices Frequently Asked Questions FCC Radiation Exposure Statement Access product tutorials and manuals from 72mm Official Website Facebook YouTube Twitter Having issues of using the product?
Please contact us before returning. support@ibroadlink.com We are always be ready to help until you smile :) DO NOT install the sensor in outdoor environment, unstable surface, or wet place. ONLY stick the sensor on a dry, clean, and flat surface. Keep the sensor away from magnetic or radio source. Change battery as soon as possible if you get low battery notification. What factors may affect the device communication?
Walls, glasses, or metal materials attenuate the signal significantly between device and phone/hub. It is highly recommended to keep clear range between them for better communication. Why sometimes I need to wake up the sensor?
For power-saving purposes, the sensor is in a "sleeping" state most of the time and it won't receive any command until it is in an active state. Every time when you try to assign the device to a room or link an action for automation, you need to press the reset button shortly to wake it up. The active state will last for 20s and you wont need to wake it up again during the active state. FCC ID: 2ATEV-SR4D FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
320mm Product Specifications Model Connectivity Power Supply Power Consumption SR4D Bluetooth DC 2.7-3V (2x AAA Batteries) 8uA (closed), 12uA
(open), 25mA (max) Low Battery Indication Yes Temperature Measurement
-10C~ 45C Humidity Measurement 85%RH Dimensions Sensor: 30 x 18.9 x 62mm Magnet: 13.7 x 31.8 x 12.7mm
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/
TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. User Manual Door Sensor SR4D Overview Whats in Package STEP 1 Install APP STEP 2 Add Device Door Sensor x1 AAA Battery x2 Sticker x2 72mm Sensor Red LED (Tampering, Low Battery) Magnet Blue LED (Pairing, Opened/Closed) Slide down to open battery cover Tampering Alert Switch Reset Hole Scan the QR code or search BroadLink BLE in App Store or Google Play to download and install the free App. Account creation is not mandatory to use the App. However, as an option, you can go to Me tab to create your account for syncing data between different mobile devices. Tap Add Device > Sensor. Press and hold the reset button for 5s using a needle until the blue LED flashes quickly (pairing mode lasts for 20s). Then click Add Devicesto let the App scan device to be paired. The device will appear on the App and the blue LED will stop flashing. NOTE: If the device does not appear, try a reset, and add again. Frequently Asked Questions
Door Sensor Door Sensor History Door opened Door closed
All on All off On device page, you can view the history of open/closed status (a BLE gateway/hub is required) You can also set the automation to trigger scenes when the sensor detects change of opened/closed status (ex. Turn on bulb if the door is opened). Alert Notifications You can set the alert notification in Me >
Message center. If you enable Push notification, you can also set which sensors are involved for alert. (a BLE gateway/hub is required) If all these are set, you can get a push notification on phone when the sensor is triggered
(ex. Alert! Living room Door sensor is opened!) and view the history in Message center. Works with Alexa/
Google Refer to the manual of gateway/hub to link to Alexa/Google service. After the device is discovered, you can ask Alexa for the status or use the sensor as trigger in Routines. NOTE: It is recommended to use the One-Click linking from BroadLink BLE App. If you are trying to enable the skill from Alexa / Google Home App, please copy the authentication code of gateway/hub and paste it in account linking page to complete. Installation 10mm Installation Illustration Align marks during installation After the sensor is paired and tested working, you can use the stickers in package to stick the sensor and magnet on door/
window and frame. 1.0 1.1 1.2 2.0
2022.7 https://www.ibroadlink.com/bleapp SR4D-BLE--BL-EN-V1.0-2207 SR4D.BLE.SMS4ZY.BL.EN.1.0 2022.7 80g 4