FCC ID: 2AG7C-BABY1 Baby Monitor

Baby Monitor Baby 1S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE What's in the box Please consult this checklist for all parts. Camera Display USB cable x 2 Power adapter x 2 Screws Bracket Manual Reset pin 1 Description Status light Microphone SD card slot Reset Speaker Call/Pairing Micro USB Micro USB DC 5V/1A Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.128G) Status light Solid red light on: network is malfunctional Blinking red light: wait for network connection (fast blinking) Solid blue light on: camera is working correctly Call/Pairing Press to make a call; long press to pair Reset Press and hold for 5 seconds with pin to reset the camera (if you have modified settings, they will return to factory defaults) Microphone Status light of charging Status light of using Zoom in/out Menu Direction OK Call Back 2 Description Antenna ON/OFF button Speaker Screen holder SD card slot Reset Micro USB Micro USB DC 5V/1A Status light of charging Status light of using Orange light: Charging Green light: Fully charged Yellow light: The display is on No light: The display is off Microphone Capture sound for your video Antenna Adjust the angle to get better signals ON/OFF button Long press 5 seconds to turn on and turn off the display Zoom in/out Zoom the image in 1X, 2X or 4X Menu On homepage, press to enter the menu interface;

On homepage, long press to enter the setting interface Direction Control the rotation directions; select the menu items OK Call Confirm Make a call after pressing the button SD card slot Support local SD Card storage (Max.128G) Reset Back Press with pin to reset the display Press to back up;

On homepage, long press to stop playing music 3 Installation 1 Use the included mounting bracket to fix the camera to a clean surface. 2 Or, install the camera on a flat surface. 4 Connection Connect the camera to the display Power on the camera and the display, and then the camera will connect to the display automatically. The connection is distance limited, so make the distance between the camera and the display is no more than 200m. Disconnect the camera to the display:

1. Press Menu button on the display screen, and select > Camera Management. 2. Long press OK button on the display screen to release the binding. Reconnect the camera to the display:

1. Press Menu button on the display screen, and select > Camera Management. 2. Long press the camera pairing button until you hear the prompt tone. 3. Press OK button on the display screen to start pairing. Connect the camera to the App The camera can be connected both to the display and the App. Generally, it is connected to the display by default. Follow the steps below to connect the camera to the App:

1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't support 5 GHz Wi-Fi. 2. Download the corresponding App on your phone. Register a new account to log in or log in directly. 3. Reset the camera using a pin until the status light is red in fast blinking.

(You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.) 4. Follow the step instructions on your smart phone to add the display, and scan nthe QR code with your camera. 5 Connection Download SmartLife or Tuya Smart is available for both iOS and Android OS. Search the name 'SmartLife','Tuya Smart' in App Store or Google Play, or scan the QR-Code to download the App. You can select the App according to needs. Support Set up router ipad IOS Android Download App(IOS&android) The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. Please keep network available 2.4GHz 5GHz 6 Usage Rotate the camera You can adjust the monitoring angle for a better vision. Press Menu button on the display screen, select and press OK to enter rotation controlling interface. Press direction buttons to rotate the camera horizontally and vertically, for a better vision.. Photo & video Take a photo:

You can take a photo when you want to capture an interesting scene of your baby. Press Menu button on the display screen, select and press OK to take a photo. Record a video:

You can record a video when you want to capture a meaningful time of your baby. Press Menu button on the display screen, select and press OK to record a video. View the taken photos and recorded videos:

1. Press Menu button on the display screen, select and press OK to enter the interface. 2. Select the camera and date, select the photo or video you want to view, and press OK to enter preview mode.

* For a video, press OK to play or pause in the preview mode.

* Press backup button to quit preview or return to main menu. 7 Usage Play music You can play music to sooth your baby when baby is crying or sleeping. There are various soft music to select. Press Menu button on the display screen, select and press OK to enter music interface. You can select different music, change the music cycle mode, or adjust the music volume. Feeding reminder Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet. 1. Press Menu button on the display screen, and select > Feeding reminder. 2. Press UP and DOWN direction buttons to select between 4 time options, and press OK to start time setting. 3. When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second and on/off; and press UP and DOWN direction buttons to change values and select on or off. 4. Press OK to save settings. 5. Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the display screen. 8 Usage Humiture detection You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures. 1. Press Menu button on the display screen, and select > Humiture detection. 2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to start setting. 3. When start to set up one option, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units. 4. Press OK to save settings. 5. In Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range. 9 Usage Smart care You can turn on functions of motion detection, noise detection and cry detection, so that you can know the baby status immediately, no matter you are sleeping, working, cooking and so on. 1. Press Menu button on the display screen, and select > Smart care. 2. Press UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection and alarm volume, and press OK to start setting. 3. When start to set up one detection mode, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to adjust sensitivity.

* You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity. 4. When set up the alarm volume, press LEFT and RIGHT direction buttons to adjust. 5. Press OK to save settings. 6. There will be a alarm when the set detection is triggered, press OK to stop alarm. 10 Usage General setting Set up brightness:

1. Press Menu button on the display screen, select and press OK to enter the interface. 2. Press UP and DOWN direction buttons to adjust brightness. Set up time:

1. Press Menu button on the display screen, and select > Time setting. 2. Press direction buttons to change date, time and time displaying mode. Set up language:

1. Press Menu button on the display screen, and select > Language. 2. Select the language you need. Set up sleep mode:

You can set up sleep mode to increase standby time. 1. Press Menu button on the display screen, and select > Sleep mode. 2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off. Turn on and off status indicator:

If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator, if you think it will affect your babys sleep. SD card:

1. Press Menu button on the display screen, and select > SD card management. Then you can view the total capacity and remaining capacity of your SD card. 2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up. Upgrade:

Make sure your camera is connected to a the 2.4 GHz Wi-Fi. You can upgrade your camera when the upgrade alarm appears. Or Press Menu button on the display screen, and select > Device information to check whether there is a upgrade. Low battery alarm:

When the camera is low on battery, the low battery alarm will appear on the display screen. Please charge the display as soon as possible. 11 FAQ Q: The display cannot be previewed properly?

A: Check whether the display has connected to the camera. If not, pair the camera and the display firstly. Q: Cannot find the pairing button?

A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press Menu button on the display screen, and select > Camera Management.) Q: What if the display screen is stuck and it doesnt work while pressing any buttons?

A: Press the reset button of your display the with pin, and then long press the power button of your display to restart it. Q: Why the camera or the display cannot identify the SD card?

A: Confirm whether the SD card is normally available and the format is FAT32. Q: Why I cant get the notifications with my cell phone App when I connect the camera to the display?

A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened. 12 Functions Pan/Tilt Rotate your camera by sliding on your smartphone, providing you with a good vision. Video flip Flip your video stream up or down for maximum flexibility. Motion detection The camera can detect movement, and then the camera will send you push notifications and app alerts. Crying detection The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts. Temperature & humidity detection The camera can detect the temperature and humidity of the environment, and the camera will send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD storage or Cloud storage. Day & Night Never miss a moment, even in complete darkness, with powerful night-vision technology. Daytime Night 13 Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-

collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 14

Model: Baby 1T Power Input: 5V DC/1A C A (Cc SN:XXXXXXXXX 7 FCC ID:2AG7C-BABY1 Made in China Hangzhou Meari Technology Co., Ltd.

Hangzhou Meari Technology Co., Ltd. Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both [TianHeng Consulting, LLC] (Agent) and [Hangzhou Meari Technology Co., Ltd.] (Applicant) acknowledge consent to obligations of each party pursuant to 47 CFR part 2.911(d)(7) of the FCC rules in regard to the agent for service of process. I [Zhiyang Chai] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC if there is any change in the status identified above.

: Hangzhou Meari Technology Co., Ltd.

: Zhiyang Chai

: Room 604-605,Building 1,No.768 Jianghong Road,Changhe street,Binjiang Applicant Company Name Contact Name Address District,Hangzhou,zhejiang,China FRN Telephone No Email 0025181900

: +86-571-56565099

: zhiyang.chai@meari.com.cn Signature: ____________________________________ Date:

___02/15/2023_______ I, Hualing Dong, HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to all certification applications to the FCC submitted by above applicant during the period of this agreement which ends at the specified date below. I agree to immediately notify the FCC if there is change in this representation. This current agreement term is one year. Agent Company Name FRN Contact Name Address Telephone No Email

: TianHeng Consulting, LLC

: 0033401258

: Hualing Dong

: 392 Andover Street, Wilmington, MA 01887, United States

: +1 617-997-4010

: tianhengconsulting@gmail.com Signature: ____________________________________ Issue Date: February 15, 2023 Expiry Date: February 15, 2024

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section the 552(b)(4) of documentation of the following products:

Information Act, we request confidentiality for the Freedom of FCC ID 2AG7C-BABY1 Model name Baby 1T,Baby 1S,Baby 1Q,Baby 1SM,Baby 1TM, Speed 9S,Speed 9T,KASMBMPT09A For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature

-06 2023-06 Date Printed Name of Signee:

Company: Hangzhou Meari Technology Co., Ltd. Address:Room 604-605,Building 1,No.768 Jianghong Road,Changhe street,Binjiang District,Hangzhou,zhejiangChina Phone:+8615869048127 Email:zhiyang.chai@meari.com.cn

Hangzhou Meari Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.06.06 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filling FCC ID: 2AG7C-BABY1 Hangzhou Meari Technology Co., Ltd. Certifies that, as of the date of the filling of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

Grantee Contacts Signature Zhiyang Chai Printed name

Hangzhou Meari Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.06.06 Ref: Attestation Statements Part 2.911(d)(5)(i) Filling FCC ID: 2AG7C-BABY1 Hangzhou Meari Technology Co., Ltd. Certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

Grantee Contacts Signature Zhiyang Chai Printed name

Model Declaration Letter FCC ID: 2AG7C-BABY1 We, the undersigning company Company Name: Hangzhou Meari Technology Co., Ltd. Address: Room 604-605,Building 1,No.768 Jianghong Road,Changhe street,Binjiang District,Hangzhou,zhejiangChina Hereby confirm that the following products:

Product description: Baby Monitor Type designation: Baby 1T,Baby 1S,Baby 1Q,Baby 1SM,Baby 1TM,Speed 9S,Speed 9T, KASMBMPT09A t Tha PCB board, structure and internal of these model(s) are the same, only the model name different for marketing purpose. Date: 2023-06-06 Name: Zhiyang Chai Telephone: +8615869048127 E-mail: zhiyang.chai@meari.com.cn Signature: