Baby Monitor ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE What's in the box Please consult this checklist for all parts. Camera Display USB cable x 2 Power adapter x 2 Screws Bracket Manual Reset pin 1 Description Microphone Status light Speaker Temperature and humidity sensor SD card slot Type-C Reset Pairing Micro USB DC 5V/1A Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.128G) Status light Solid red light on: network is malfunctional Blinking red light: wait for network connection (slowly blinking) connecting the network (fast blinking) Solid blue light on: camera is working correctly Long press the camera pairing button to pair with the display Press and hold for 5 seconds with pin to reset the camera (if you have modified settings, they will return to factory defaults) Pairing Reset Microphone Status light of charging Status light of using Zoom in/out Menu Direction OK Call Back 2 Description Antenna ON/OFF button Speaker Screen holder SD card slot Reset Type-C Micro USB DC 5V/1A Status light of charging Status light of using Orange light: Charging Green light: Fully charged Yellow light: The display is on No light: The display is off Microphone Capture sound for your video Antenna Adjust the angle to get better signals ON/OFF button Long press 5 seconds to turn on and turn off the display Zoom in/out Zoom the image in 1X, 2X or 4X Menu On homepage, press to enter the menu interface;
On homepage, long press to enter the setting interface Direction Control the rotation directions; select the menu items OK Call Confirm Make a call after pressing the button SD card slot Support local SD Card storage (Max.128G) Reset Back Press with pin to reset the display Press to back up;
On homepage, long press to stop playing music 3 Installation 2 Put the camera on a clean and flat surface. 2 Use the included mounting bracket to fix the camera to a clean surface. 4 Connection Connect the camera to the App The camera can be connected both to the monitor and the App. Generally, it is connected to the monitor by default. Follow the steps below to connect the camera to the App:
1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't support 5 GHz Wi-Fi. 2. Download the corresponding App on your phone. Register a new account to log in or log in directly. 3. Reset the camera using a pin until the status light is red in fast blinking.
(You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
(If you are using the monitor, the audio and video will be temporarily disconnected, and will automatically resume after the camera is successfully configured with the network. The maximum time is 2 minutes. 4. Follow the step instructions on your smart phone to add the monitor, and scan the QR code with your camera. App Download The App is available for both iOS and Android OS. Scan the QR code or search "CloudEdge" at App Store and Google Play. Download and install the App at your phone. You can select the App according to needs. Support iPad iOS Android Download App(iOS&Android) 5 Connection Set up router The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network. Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. Please keep network available 2.4GHz 5GHz Connect the camera to the monitor Power on the camera and the monitor, and then the camera will connect to the monitor automatically. The connection is distance limited, so make the distance between the camera and the monitor is no more than 200m. Disconnect the camera to the monitor:
1. Press Menu button on the monitor screen, and select > Camera Management. 2. Long press OK button on the monitor screen to release the binding. Reconnect the camera to the monitor:
1. Press Menu button on the monitor screen, and select > Camera Management. 2. Long press the camera pairing button until you hear the prompt tone. 3. Press OK button on the monitor screen to start pairing. Unbind Bind 6 Usage Rotate the camera You can adjust the monitoring angle for a better vision. The direction buttons on the monitor screen are available when the camera is powered on. Press direction buttons to rotate the camera horizontally and vertically, for a better vision. Photo & video Take a photo:
You can take a photo when you want to capture an interesting scene of baby. Press Menu button on the monitor screen, select and press OK to take a photo. Record a video:
You can record a video when you want to capture a meaningful time of baby. Press Menu button on the monitor screen, select and press OK to record. View the taken photos and recorded videos:
1. Press Menu button on the monitor screen, select and press OK to enter the interface. 2. Select the camera and date, select the photo or video you want to view, and press OK to enter preview mode.
* For a video, press OK to play or pause in the preview mode.
* Press backup button to quit preview or return to main menu. 7 Usage Play music You can play music to sooth your baby when baby is crying or sleeping. There are various soft music to select. Press Menu button on the monitor screen, select and press OK to enter music interface. You can select different music, change the music cycle mode, or adjust the music volume. Feeding reminder Remind you to feed your baby, when you are too busy, or when you want to give your baby a regular diet. 1. Press Menu button on the monitor screen, and select > Feeding Reminder. 2. Press UP and DOWN direction buttons to select between 4 time options, and press OK to start time setting. 3. When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second and on/off; and press UP and DOWN direction buttons to change values and select on or off. 4. Press OK to save settings. 5. Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the monitor screen. 8 Usage Temperature and humidity detection You can real-time monitor the temperature and humidity of your baby room. When the temperature and humidity are out of range, you can get the alarms immediately, and then take measures. 1. Press Menu button on the monitor screen, and select > Temperature and humidity. 2. Press UP and DOWN direction buttons to select options between temperature range, humidity range and out of range reminder, and press OK to start setting. 3. Press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units. 4. Press OK to save settings. 5. In Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range. Safety Protection You can turn on or turn off the Wi-Fi network channel so that others cannot live view the videos by App if the function is off. And you can also view the visited records as all visits through the App will be recorded. 9 Usage Smart care You can turn on functions of motion detection, noise detection and cry detection, so that you can know the baby status immediately, no matter you are sleeping, working, cooking and so on. 1. Press Menu button on the monitor screen, and select > Smart Care. 2. Press UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection and alarm volume, and press OK to start setting. 3. When start to set up one detection mode, press LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to adjust sensitivity.
* You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity. 4. When set the alarm volume, press LEFT and RIGHT direction buttons to adjust. 5. Press OK to save settings. 6. There will be a alarm when the set detection is triggered, press OK to stop alarm. 10 Usage General setting Set up brightness:
1. Press Menu button on the monitor screen, select and press OK. 2. Press UP and DOWN direction buttons to adjust brightness. Set up time:
1. Press Menu button on the monitor screen, and select > Time setting. 2. Press direction buttons to change date, time and time displaying mode. Set up language:
1. Press Menu button on the monitor screen, and select > Language. 2. Select the language you need. Set up sleep mode:
You can set up sleep mode to increase standby time. 1. Press Menu button on the monitor screen, and select > Sleep mode. 2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off. Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator, if you think it will affect your babys sleep. Press Menu button on the monitor screen, and select > . SD card:
1. Press Menu button on the monitor screen, and select > SD card management. Then you can view the total capacity and remaining capacity of your SD card. 2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up. Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the monitor screen. Please charge the monitor as soon as possible. 11 FAQ Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. If not, pair the camera and the monitor firstly. Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button for 3 seconds, and follow the step instructions of the monitor.
(To enter the pairing interface of the monitor, press Menu button on the monitor screen, and select > Camera Management.) Q: What if the monitor screen is stuck and it doesnt work while pressing any buttons?
A: Press the reset button of your monitor with the pin, and then long press the power button of your monitor to restart it. Q: Why the camera or the monitor cannot identify the SD card?
A: Confirm whether the SD card is normally available and the format is FAT32. Q: Why I cant get the notifications with my cell phone App when I connect the camera to the monitor?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened. Q: Why the monitor can't view video after the camera is connected to the App?
A: The monitor has a 2 minute interruption time when the camera is reset, and it will automatically resume after 2 minutes. If it doesnt recover, try to pair the monitor and camera again. 12 Functions Pan/Tilt Rotate your camera by sliding on your smartphone, providing you with a good vision. Video flip Flip your video stream up or down for maximum flexibility. Motion detection The camera can detect movement, and then the camera will send you push notifications and app alerts. Crying detection The camera can detect the crying of your baby, and the camera will send you push notifications and app alerts. Temperature & humidity detection The camera can detect the temperature and humidity of the environment, and the camera will send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD storage or Cloud storage. Day & Night Never miss a moment, even in complete darkness, with powerful night-vision technology. Daytime Night 13 Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-
collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 14