FCC ID: 2AG7CSNAP8S BATTERY CAMERA

Battery Camera ORIGINALITY DESIGN SMART - AND BEAUTIFUL BATTERY CAM QUICK GUIDE What's in the box Please consult this checklist for all parts. Battery Camera Power adapter USB cable Screws(2 kinds) Pin Bracket Silicone plug User Manual 1

Status Light Microphone Camera Speaker Power button PIR Micro USB Reset RET SD SD card slot Power Port DC 5V10%

Power on/off Press the button for 3 seconds to turn on/off the camera Status light Red light solids on: the camera network is abnormal Red light blinks: awaiting WiFi connection, or currently connecting (faster blinking) Blue light solids on: camera running correctly SD card slot Support local SD Card storage (Max.128G) Reset Press and hold on for 5 seconds to reset the camera Charging Red indicator solids on: battery is charging indicator Blue indicator solids on: charging completed Battery capacity 6700mAh (Two 18650 lithium-ion batteries) 2 Install Mode 1 Bottom Bracket Installation 1 2 1.Fix the bracket to the wall with the mounting screws 2.Install the camera in the bracket and lock it with the screw Mode 2 Side Bracket Installation 1.Fix the mounting bracket in the angle wall mount 2.Fix the angle wall mount to the wall 3.Install the camera in the bracket and lock it with the screw 3

Connect Download Support Add device Cloudedge is available for both iOS and Android OS. Rearch the name 'Cloud edge'in App Store or Android Market, or scan the QR-Code to download the App. ipad IOS Android Download App(IOS&android) Log in the CloudEdge, select "Add Device", and add the smart camera to the App according to the screen tips(Make the smart camera close to the router when configuring). NOTE:If you need to re-select the WiFi network, please press and hold the "RESET"

button for 5 seconds, the device will restart, and the indicator will be flashing red. 4 FAQ Q: The device cannot be previewed properly?

A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting?

A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App. Q: How to cut the camera network to another router?

A: First remove and reset the device on the App and then configure the device again by the App. Q: Why doesn't the device identify the SD card?

A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card cant be identified when the internet environment is not good. Q: Why I cant get the notifications with my cell phone App?

A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened. 5

Functions Remote wake-up Full-duplex audio PIR Record Day & Night The camera will be in a sleep mode to save power; you can have a preview in App. You can see and hear the vistor in your App from the camera. When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone. Using SD card or opening the Cloud-Storage Service, to keep recording for every moment. Powerful night vision means no interruptions, even in complete darkness. Daytime Night 6

Hangzhou Meari Technology Co., Ltd. Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, Zhejiang, China FCC ID:2AG7CSNAP8S Input:5V == 1A S/N:056565099

Hangzhou Meari Technology Co,Ltd. No.91.Chutian Road, Binjiang, Hangzhou,310051 China eee Input:5V == 1A He S/N:056565099

Hangzhou Meari Technology Co., Ltd. Date: 2020-07-17 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AG7C-SNAP8S Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Li Zhu Printed name

Model Declaration Letter We, the undersigning company Company Name: Hangzhou Meari Technology Co., Ltd Address: No.91,Chutian Road, Xixing Block, Binjiang, Hangzhou, China, 310051 Hereby confirm that the following products:

Product description: BATTERY CAMERA Type designation: Snap 8S, Snap 8T, GO1, GO1T, GO1S That All versions of the Model Snap 8S and Snap 8T, GO1, GO1T, GO1S are electrically equal except the following difference:

1.Only differs in model name. Date: 2020-07-17 Name: Li Zhu Telephone: +8615869048127 E-mail: tery.zhu@ppstrong.com Signature: U yw

Company: Hangzhou Meari Technology Co., Ltd. Add:Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, Zhejiang, China Tel: +8615869048127 Fax: +86-571-56565100 E-mail: zhiyang.chai@meari.com.cn DECLARATION Date: 2021-02-04 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam:

We, Hangzhou Meari Technology Co., Ltd., hereby declare that product name:

BATTERY CAMERA (model name: Snap 8S, GO1, W1. FCC ID:

2AG7CSNAP8S). These models are electrically identical with the PCB design, components and electromagnetic compatibility characteristics. And Snap 8S has been tested by BACL. The differences of them are as follows:

Model name. Please contact me if there is need for any additional clarification or information. Best Regards, Typed or Printed Name: Zhiyang Chai Signature:

Title: Manager

Company: Hangzhou Meari Technology Co., Ltd. Add:Room 604-605, Building 1, No.768 Jianghong Road, Changhe street, Binjiang District, Hangzhou, Zhejiang, China Tel: +8615869048127 Fax: +86-571-56565100 E-mail: zhiyang.chai@meari.com.cn FCC Confidential Authorization Date: 2021-02-04 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AG7CSNAP8S To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Hangzhou Meari Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Block Diagram Schematics Operation Description Sincerely Yours, Signature:

Title: Manager Typed or Printed Name: Zhiyang Chai

TECHNICAL COMPLIANCE STATEMENT This is to certify that the product listed in follows was (were) tested in the BTL EMC Laboratory to comply with below FCC official limits. Address No.91, Chutian Road, Xixing Block, Binjiang, Hangzhou, China 310051 Equipment Model Name Brand Name Applicant BATTERY CAMERA Snap 8S, Snap 8T, GO1, GO1T, GO1S N/A Hangzhou Meari Technology Co., Ltd. Standard(s) Report(s) FCC CFR Title 47,Part 15,Subpart B,Class B ANSI C63.4-2014 BTL-FCCE-1-2005H045 The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited according to the ISO/IEC 17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Ryan Wang Authorized Signatory BTL INC. No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666