|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2024-02-07
|
|
1 2
|
Applicant's complete, legal business name |
Hangzhou Meari Technology Co., Ltd.
|
|
1 2
|
FCC Registration Number (FRN) |
0032547598
|
|
1 2
|
Physical Address |
Room 604-605, Building 1,No.768 Jianghong Road, Changhe street, Binjiang District
|
|
1 2
|
Room 604-605, Building 1,No.768 Jianghong Road
|
|
1 2
|
Hangzhou, Zhejiang,, N/A
|
|
1 2
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
o******@kl-certification.de
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
2AG7C
|
|
1 2
|
Equipment Product Code |
R833
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
Z****** C****
|
|
1 2
|
Title |
Manager
|
|
1 2
|
Telephone Number |
+8615********
|
|
1 2
|
Fax Number |
+86-5********
|
|
1 2
|
E-mail |
z******@meari.com.cn
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | DTS - Digital Transmission System |
| 1 2 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CAMERA WIFI Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Original Equipment |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. Device is a client only device and 802.11b/g/n modes configuration, OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also supports 5GHzWLAN transmitters. |
| 1 2 | Power listed is maximum average conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. Device is a client only device and 802.11a/n modes configuration. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also supports 2.4GHzWLAN and BLE transmitters. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
Shenzhen Global Test Service Co., Ltd.
|
|
1 2
|
Name |
S****** H****
|
|
1 2
|
Telephone Number |
86-13********
|
|
1 2
|
E-mail |
h******@gtscert.com
|
|