IP CAMERA MODEL: BELL 7S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE What's in the box Bell 7S Pin USB cable Double-sided tape I/M A x 2 B x 2 D x 1 Screws(3 kinds) Battery N/C Plate Power adapter(Optional) 1 Lens PIR Speaker Doorbell button &
Status light Charging indicator Micro USB SD card slot Microphone Reset Description Power Port DC 5V Doorbell button Press the button to activate the doorbell Status light Red light solids on: the camera network is abnormal Red light blinking: awaiting WiFi connection, or currently connecting (faster blinking) Blue light solids on: camera running correctly Microphone Captures sound for your video SD card slot Supports local SD Card storage (Max.128G) Reset Press and hold on for 5 seconds with pin to reset the doorbell,
(unable to unbind the bell from account) Charging Red indicator solids on: battery is charging indicator Blue indicator solids on: finishing charging 2 Battery Installation tape or tape 2.Nail expansion screws 3.Fix the mounting bracket with screws or tape(No need screws when install tape) 5.Tighten the screw Be careful with the power!
2.Nail expansion screws 3.Tighten the wire with a screwdriver Installation tape or tape 3.Fix the mounting bracket with screws or tape(No need screws when install tape) 5.Install the doorbell into the bracket 6.Tighten the screw 3 Connect Download Smart Life is available for both iOS and Android OS. Search the name
'Smart LIfe in App Store or Google Play, or scan the QR-Code to download the App. Support IOS Android Download App(IOS&android) Add device Log in the Smart Life, select "Add Device", and add the smart doorbell to the APP according to the screen tips(Make the smart doorbell close to the router when configuring). NOTE:If you need to re-select the WiFi network, please press and hold the "RESET"
button for 5 seconds, the device will restart, and the indicator will be flashing red. 4 FAQ Q: The camera cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, if not, it is better to reset the camera and add it again. Q: Why is it still in the list of devices after reseting?
A: The reseted camera only resets the network configuration of the camera, but cannot change the configuration in the App, remove the camera in your account,need to add again. Q: How to cut the camera network to other router?
A: First remove and reset the camera in your App account and then configure your camera again by the App. Q: Why doesn't the camera identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can't be identified when the internet environment is not good. Q: Why I can't get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened. 5 Functions Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App. Full-duplex audio You can see and hear the vistor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm You can set a low-battery alarm threshold in your phone App. The threshold is set to a minimum of 10% and a maximum of 50%. When the battery power of the camera is lower than the set threshold, the App will have a reminder. Record Using SD card or Opening the Cloud-Storage Service, to keep recording for every moment. Day & Night Powerful night vision means no interruptions, even in complete darkness. Daytime Night 6 Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Warning:
To ensure normal use, please keep a detection distance of at least 20cm. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement