FCC ID: 2AXVM-HM-TD1017 Thermal Presence Detector

Thermal Human Detector Quick Start Guide Table of Contents English 9 Franais 1 A 2 B 1 3 4 2 5 6 C 1 2 2.1 7 2.2 8 English Product appearance is for reference only and may differ from the actual product. Interface and Button (Page 2 - A) 1. RS-485 & Alarm Interface 2. USB Type-C 3. MicroSD Slot 4. Reset Button: Restore to default settings. Install the Camera (Page 3 - B) 1. Wall mounting of the camera a: Wall mounting bracket b: Ceiling mounting bracket 2. Ceiling mounting of the camera Note:

The drill cable hole is within the grey circle. The detection area is a 4:3 rectangle. The arrows direction in B-2- is the long side of detection area. Wi-Fi Connection Connect to Wi-Fi via Web Browser Before You Start Check the label on the device or the package to obtain the device serial number. Steps 1. Connect power and start the device. 2. Enable the Wi-Fi function on your phone or computer, and select the SSID of the device. Note: The SSID is HM-2TH_Verification Code. For example, if the verification code of the device is ABCDEF, the SSID is HM-2TH_ABCDEF. 3. Input the corresponding password of the SSID. Note: The passwords are the last 8 digits of the device serial number. For example, if the device serial number is D12345678, the corresponding password of the SSID is 12345678. 4. Start the browser on your phone or computer. Click Refresh on the web, and then select the Wi-Fi to be connected to. Input the Wi-Fi password if the device is not activated. Input the Wi-Fi password, user name and user password if the device has been activated. 5. Check the status of the blue indicator light to determine whether the connection is successful. Flash about every 2 seconds: Wi-Fi connection succeeded. Flash about every 0.2 seconds:

Wi-Fi connection failed. Detection Range (Page 7 - C) The detection range of ceiling mounting in C - 1. Mounting Height (h) 3.0 m 4.2 m (Max.) Length

(a) 3.2 m 5.7 m Width

(b) 2.0 m 3.6 m The detection range of wall mounting in C - 2 - 2.1. Mounting Height (h) Depression Angle of Bracket () Distance of Blind Area (c) Effective Detection Distance (d) The detection range of wall mounting in C - 2 - 2.2. Nearest Horizontal Effective Distance (d1) Farthest Horizontal Effective Distance (d2) Distance of Blind Area (c) Effective Detection Distance (d) 2.8 m 57.5 0 m 3 m 2.3 m 5.7 m 0 m 3 m Note:

The grey area refers to the effective detection area. 9 User Manual For detailed information, refer to the user manual of the device. 2021 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the HIKMICRO website (www.hikmicrotech.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks and other HIKMICROs trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. DISCLAIMER TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT

(INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS 10 DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance:

This device complices with Part 15 of the FCC Rules. Operation is subject to following two conditions:

This device may not cause harmful interference,and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV techniciaan for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, please see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery 11 information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information, please see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3

(B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. Safety Instructions These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations The device should be used in compliance with local laws, electrical safety regulations, and fire prevention regulations. Transportation Keep the device in original or similar packaging while transporting it. Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on 12 the device and the company shall not take any responsibilities. Do not drop the product or subject it to physical shock. Keep the device away from magnetic interface. Power Supply Please purchase the charger by yourself. Input voltage should meet the Limited Power Source (16 VDC) according to the IEC62368 standard. Please refer to technical specifications for detailed information. Make sure the plug is properly connected to the power socket. The socket-outlet shall be installed near the equipment and shall be easily accessible. DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload. DO NOT touch the bare metal contacts of the inlets after the circuit breaker is turned off. Electricity still exists.

+ identifies the positive terminal(s) of equipment which is used with, or generates direct current. -

identifies the negative terminal(s) of equipment which is used with, or generates direct current. Ensure correct wiring of the terminals for connection to an AC mains supply. Battery CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque d'explosion si la batterie est remplace par une batterie de type incorrect. Mettre au rebut les batteries usages conformment aux instructions. CAUTION: The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary. CAUTION: For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur. CAUTION: This equipment is not suitable for use in locations where children are likely to be present. CAUTION: Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). CAUTION: DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. CAUTION: DO NOT leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. CAUTION: DO NOT subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Installation Never place the equipment in an unstable location. The equipment may fall, causing serious personal injury or death. This equipment is for use only with corresponding brackets. Use with other (carts, stands, or carriers) may result in instability causing injury. System Security You acknowledge that the nature of Internet provides for inherent security risks, and our company shall not take any responsibilities for abnormal operation, privacy leakage or other damages resulting from cyber attack, hacker attack, however, our company will provide 13 timely technical support if required. Please enforce the protection for the personal information and the data security as the device may be confronted with the network security problems when it is connected to the Internet. Please contact us when the device might exist network security risks. Please understand that you have the responsibility to configure all the passwords and other security settings about the device, and keep your user name and password. Maintenance If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance. A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan varies, so periodic checking is recommended. Contact your dealer for details. Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired. To reduce the risk of fire, replace only with the same type and rating of fuse. The serial port of the equipment is used for debugging only. Disconnect the power source during servicing. Using Environment Make sure the running environment meets the requirement of the device. The operating temperature shall be -

20 C to 45 C (-4 F to 113 F), and the operating humidity shall be 95% or less, no condensing. DO NOT expose the device to high electromagnetic radiation or dusty environments. DO NOT aim the lens at the sun or any other bright light. The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the equipment. No naked flame sources, such as lighted candles, should be placed on the equipment. Provide a surge suppressor at the inlet opening of the equipment under special conditions such as the mountain top, iron tower, and forest. Burned fingers when handling the parts with symbol one-half hour after switching off before handling the parts. Wait Emergency If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Manufacture Address Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co., Ltd. COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any 14 necessary export license requirements if you intend to transfer, export, re-export the thermal series products between different countries. Franais 15 UDB

Model: HM-TD1017-2/QW-HS121 Model: HM-TD1017-1/QW-HS111 Label Location RemarkIts hard to put FCC statement on the product due to devices irregular appearance. FCC statement will be placed in the user manual which the device is marketed.

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Microimage Software Co., Ltd. Address Grantee Code FCC ID Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang 2AXVM 2AXVM-HM-TD1017 Authorized Contact Name Jianyi Li Contact Email Contact Phone lijianyi5@hikvision.com 18858952085 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1)

(2)

(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:2021/09/28 Print Name:

Jianyi Li Testing and Certification Engineer Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Hangzhou Microimage Software Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AXVM-HM-TD1017 To whom it may concern:

Date: 2021-09-28 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Microimage Software Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Jianyi Li Title: Testing and Certification Engineer Signature:

On behalf of Company: Hangzhou Microimage Software Co., Ltd. Telephone: 18858952085

Hangzhou Microimage Software Co., Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Microimage Software Co., Ltd. Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,Binjiang District, Hangzhou, Zhejiang Regarding:

Confidentiality Request regarding application for FCC ID: 2AXVM-HM-TD1017 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Jianyi Li Title: Testing and Certification Engineer Company Name: Hangzhou Microimage Software Co., Ltd.

Hangzhou Microimage Software Co., Ltd. Current Date : 2021-09-28 To:

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (Hangzhou Microimage Software Co., Ltd.) HEREBY DECLARED THAT Product Description Model No. Thermal Presence Detector HM-TD1017-1/QW-HS111;HM-TD1017-3/QW-HS131;HM-TD1008-1/QW-HS011;HM-

TD1008-2/QW-HS021;HM-TD1008-3/QW-HS031;HM-TD1028-1/QW-HS211;HM-

TD1028-2/QW-HS221;HM-TD1028-3/QW-HS231 Manufacturers Name Hangzhou Microimage Software Co., Ltd. Manufacturers Address Room 313, Unit B, Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang

*Except that the model number and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():

HM-TD1017-2/QW-HS121 Manufacturers Name ():

Hangzhou Microimage Software Co., Ltd. Manufacturers Address): Room 313, Unit B, Building 2,399 Danfeng Road,Xixing Subdistrict,Binjiang District,Hangzhou,Zhejiang Sincerely, Signature ():

Printed Name ():

Jianyi Li Position/Title ():

Testing and Certification Engineer Contact Number ():

18858952085