Global Intelligent Platform HS01 Datasheet Product Manual Tuya HS01 Wi-Fi Module Version: 2.0.0 Date: 2019-12-16 No.: 0000000004 1. Product Overview HS01 is a Wi-Fi module developed by Hangzhou Tuya Inc ,which take the communication with RS485 differential signal and transmit the data with 2.4G WIFI . It consists of a highly integrated RF chip (RTL8710BN)RS485 chip and DC-DC components, It embedded with Wi-Fi network protocol stack and robust library functionsBesides it also contains with a low-power ARM-CM4 MCU, 2 MB flash memory, 256KB SRAM, WLAN MAC1T1R WLAN and rich peripheral resources. Embedded with32 bit CPU, which can be used as an application processor Dominant frequency: up to 125 MHz 1.1 Features Working voltage: 5 V Wi-Fi connectivity 802.11b/g/n/HT20/HT40 Channels 1 to 14 at 2.4 GHz(Ch1-11 for US/CA,Ch1-13 for EU/CN) WPA, WPA2, WEP, and TKIP security modes Up to +17 dBm Avg output power in 802.11b mode STA, AP, and STA+AP working modes Smart and AP network configuration modes (for Android and iOS devices) Onboard PCB antenna Working temperature: 20C to 85C Hangzhou Tuya Information Technology Co., Ltd. 1 V2.0.0 HS01 Datasheet 1.2 Applications Intelligent building Smart household and home appliances Industrial wireless control Handheld device Change History No. Date Change Description Version After Change 1 2019-12-16 First release. 2.0.0 Hangzhou Tuya Information Technology Co., Ltd. 2 V2.0.0 HS01 Datasheet Contents 1. Product Overview ............................................................................................................ 1 1.1 Features.................................................................................................................. 1 1.2 Applications ............................................................................................................ 2 2 Module Interfaces ............................................................................................................. 5 2.1 Dimensions and Footprint ...................................................................................... 5 2.2 Pin Definition .......................................................................................................... 6 2.3 Test Pin Definition ................................................................................................... 6 3 Electrical Parameters ........................................................................................................ 7 3.1 Absolute Electrical Parameters .............................................................................. 7 3.2 Electrical Conditions ............................................................................................... 7 3.3 RF Current .............................................................................................................. 8 4 RF Features ...................................................................................................................... 9 4.1 Basic RF Features .................................................................................................. 9 4.2 Wi-Fi Output Power ................................................................................................ 9 4.3 Wi-Fi RX Sensitivity .............................................................................................. 10 5 Antenna Information ........................................................................................................ 10 5.1 Antenna Type .......................................................................................................... 10 5.2 Antenna Interference Reduction ................................................................................ 10 5.3 Antenna Connector Specifications ....................................................................... 11 6. Packaging Information and Production Instructions ...................................................... 11 6.1 Mechanical Dimensions ........................................................................................... 11 6.2 Production Instructions ......................................................................................... 11 7 MDQ and Packing Information ....................................................................................... 12 8 Appendix: Statement ....................................................................................................... 12 Figures Figure 1 HS01 front views ................................................................................................... 5 Hangzhou Tuya Information Technology Co., Ltd. 3 V2.0.0 HS01 Datasheet Figure 2 HS01 back views ................................................................................................... 5 Figure 3 Mechanical dimension ......................................................................................... 11 Tables Table 1 HS01 interface pins ................................................................................................. 6 Table 2 HS01 test pins ......................................................................................................... 6 Table 3 Absolute electrical parameters ................................................................................ 6 Table 4 Normal electrical conditions .................................................................................... 7 Table 5 Current during constant transmission and transmitting .......................................... 8 Table 6 RX power consumption during constant receiving ................................................. 8 Table 7 Basic RF features.................................................................................................... 9 Table 8 TX power during constant emission ........................................................................ 9 Table 9 RX sensitivity ......................................................................................................... 10 Hangzhou Tuya Information Technology Co., Ltd. 4 V2.0.0 HS01 Datasheet 2 Module Interfaces 2.1 Dimensions and Footprint The electrical interface of the transfer board is ph-4aw connector, pin spacing is 1.25mm. HS01 dimensions:20mm0.35mm(W)400.35mm(L) 8.00.15mm (H) Note :(H) is the total height of Bottom surface components and Top surface components of the transfer plate Figure 1 shows the HS01 dimensions. Figure 1 HS01 front views Figure 2 HS01 back views Hangzhou Tuya Information Technology Co., Ltd. 5 V2.0.0 HS01 Datasheet 2.2 Pin Definition Table 1 describes the interface pins. Table 1 HS01 interface pins No. Symbol I/O Type Function 1 2 3 4 A B GND 5V I/O I/O P P RS485-A Interface RS485-B Interface Power supply reference ground pin Power supply pin Note: P indicates power-supply pins, I/O indicates input and output pins. 2.3 Test Pin Definition Table 2 describes the test pins. Table 2 HS01 test pins No. Symbol I/O Type Function Internal 3.3V Power pin for downloading and authorizing Internal GND pin UART0_RxUsed for authorization UART0_TxUsed for authorization Log TxUsed for debugging to print the log information Log RxUsed for debugging to print the log information 1 2 3 4 5 6 3.3V GND Rx Tx Log_Tx Log_Rx P P I/O I/O I/O I/O Note: Test pins cannot be used. Hangzhou Tuya Information Technology Co., Ltd. 6 V2.0.0 HS01 Datasheet 3 Electrical Parameters 3.1 Absolute Electrical Parameters Table 3 Absolute electrical parameters Parameter Description Minimum Maximum Unit Value Value Ts VBAT Static electricity voltage
(human body model) Static electricity voltage
(machine model) Storage temperature 20 Power supply voltage 2.5 Tamb = 25C N/A 85 5.5 2 Tamb = 25C N/A 0.5 C V kV kV 3.2 Electrical Conditions Table 4 Normal electrical conditions Parameter Description Minim um Value Typical Value Maximum Unit Value Ta Working temperature 20 N/A VBAT Power supply voltage 4.5 5 85 5.5 12 C V V
-7 N/A VI VIL VIH Input voltage at any bus terminal(separately or common mode) Low-level input voltage
(driver, driver enable, and receiver enable inputs) High-level input voltage (driver, driver enable, and receiver enable inputs) 0 N/A 0.8 V 2 N/A VCC V Hangzhou Tuya Information Technology Co., Ltd. 7 V2.0.0 HS01 Datasheet VID IO IO Differential input Voltage
-12 N/A 12 V Output current, driver
-60 N/A N/A 60 8
-8 mA mA Output current, receiver 3.3 RF Current Table 5 Current during constant transmission and transmitting Parameter Working Status Mode Rate TX Power EIRP 802.11b 11 Mbit/s
+19 dBm 802.11g 6 Mbit/s
+16 dBm Typical Value Unit 340 330 mA mA TX Mcs0 15dBm 330 mA Mcs0 15dBm 330 mA 11n BW20 11n BW40 3.4 Wi-Fi RX Power Consumption Table 6 RX power consumption during constant receiving Symbol Mode Rate Typical Value Unit IRF IRF CPU Sleep 11 Mbit/s 90 CPU Active 54 Mbit/s 120 mA mA Hangzhou Tuya Information Technology Co., Ltd. 8 V2.0.0 HS01 Datasheet 4 RF Features 4.1 Basic RF Features Table 7 Basic RF features Parameter Description Frequency band 2.412 GHz to 2.484 GHzchannels1-11 for FCC1-13 for CE Wi-Fi standard IEEE 802.11b/g/n20/n40 (channels 1 to 14) Data transmission rate 802.11b: 1, 2, 5.5, or 11 (Mbit/s) 802.11g: 6, 9, 12, 18, 24, 36, 48, or 54 (Mbit/s) 802.11n: HT20 MCS0 to MCS7 802.11n: HT40 MCS0 to MCS7 Antenna type PCB antenna 4.2 Wi-Fi Output Power Table 8 TX power during constant emission Parameter Minimu m Value Typical Value Maxim Unit um Value Average RF output power, 802.11b CCK mode 1 N/A 19 N/A dBm Average RF output power, 802.11g OFDM 54 N/A 16 N/A dBm Mbit/s Mbit/s Average RF output power, 802.11n OFDM MCS7 N/A 15 N/A dBm mode mode Frequency error 20 N/A 20 ppm Hangzhou Tuya Information Technology Co., Ltd. 9 V2.0.0 HS01 Datasheet 4.3 Wi-Fi RX Sensitivity Table 9 RX sensitivity Parameter Minimum Value Typical Value Maximum Value Unit PER < 8%, 802.11b CCK mode 1 Mbit/s N/A 91 N/A dBm PER < 10%, 802.11g OFDM mode 54 Mbit/s N/A 75 N/A dBm PER < 10%, 802.11n OFDM mode MCS7 N/A 72 N/A dBm 5 Antenna Information 5.1 Antenna Type HS01 uses the onboard PCB antenna. 5.2 Antenna Interference Reduction To ensure optimal Wi-Fi performance when the Wi-Fi module uses an onboard PCB antenna, it is recommended that the antenna be at least 15 mm away from other metal parts. To prevent adverse impact on the antenna performance, do not use copper or route cables along the antenna area on the PCB. For details about the onboard PCB antenna area on a module, see Figure 3. Hangzhou Tuya Information Technology Co., Ltd. 10 V2.0.0 HS01 Datasheet 5.3 Antenna Connector Specifications There is no antenna connector for this module 6. Packaging Information and Production Instructions 6.1 Mechanical Dimensions Figure 3 HS01 mechanical dimension 6.2 Production Instructions 1. Storage conditions for a delivered module are as follows:
(1) The moisture-proof bag is placed in an environment where the temperature is below 30C and the relative humidity is lower than 70%.
(2) The shelf life of a dry-packaged product is six months from the date when the product is packaged and sealed. Attention:
(1) In the whole process of production, operators at all stations must wear electrostatic rings.If the 30% circle is pink, bake the module for 4 consecutive hours.
(2) During operation, strictly prevent water or dirt from touching the module Hangzhou Tuya Information Technology Co., Ltd. 11 V2.0.0 HS01 Datasheet 7 MDQ and Packing Information MOQ and packing information Product Model MOQ Packing Method Number of Modules in Each Reel Pack Number of Reel Packs in Each Box HS01 8 Appendix: Statement Federal Communications Commission (FCC) Declaration ofConformity FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Hangzhou Tuya Information Technology Co., Ltd. 12 V2.0.0 HS01 Datasheet Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncont rolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an This transmitter must not be co-located or operating in conjunction with any other uncontrolled environment. antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. Hangzhou Tuya Information Technology Co., Ltd. 13 V2.0.0 HS01 Datasheet The firmware setting is not accessible by the end user. The final end product must be label led in a visible area with the following:
Contains Transmitter Module 2ANDL-HS01-485 This radio module must not installed to co-locate and operating simultaneously with other radios in host system, additional testing and equipment authorization may be required to operating simultaneously with other radio. Hangzhou Tuya Information Technology Co., Ltd. 14 V2.0.0 HS01 Datasheet Declaration of Conformity European notice Hereby, Hangzhou Tuya Information Technology Co., Ltd declares that this WIFI module product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EC. A copy of the Declaration of conformity can be found at http://www.tuya.com. EN 300 328 V2.2.2 EN 301 489-1 V2.2.3; Draft ETSI EN 301 489-17 V3.2.2 EN 62311:2008; EN 50665:2017 EN 62368-1:2014+A11:2017 Hangzhou Tuya Information Technology Co., Ltd. 15 V2.0.0