FCC ID: 2AMVQ-LC01 KAT loco

KAT Ioco OWNER'S MANUAL This product is for home use ONLY and NOT for the commercial use. Thank you for purchasing our product!

Please read this instruction manual carefully and keep it safely stored for future use. INDEX First & Foremost Declaration Safety Instructions Health Warnings Laws and regulations Product Introduction Product Description Product Appearance Product Parameters List of Items PC Based Software Description Software Description Software Download First Use Instructions Contact Information Product Warranty 04 05 07 08 12 12 13 17 18 19 19 27 27 First & Foremost This owner's manual contains all the information you need to install and use KAT loco. This product is for home use ONLY and NOT for the commercial use. The following symbols are used to indicate useful and import-

ant information:

This symbol is a precaution: It usually provides additional information to help with a task, as well as information that only applies to a certain situation. This symbol is a hint, letting you know what might be helpful at that particular point. This symbol is important: You must complete one or more of hardware or software installations or settings as described in the manual. This symbol is a safety warning reminding you to be wary of your personal safety while performing a task. Pay special attention to this symbol to avert any potential risk. 03 Declaration It is the trademark of Hangzhou Virtual and Reality Technology Co., Ltd. All trademarks, product identication and trade names of other companies appearing in this manual belong to their respective owners. No parts or content of this manual may be copied or reproduced without the written permission of the company, and may not be shared in any form or used for any commercial or protable purpose. The contents of this manual are subject to change due to product upgrades or other reasons. Our company reserves the right to modify the contents of this manual without any notice or prompt. This manual is intended as a guide only. We do our best to provide accurate information in this manual but we do not guarantee that the contents of this manual are completely error free. Statements, information, and recommendations provided in this manual do not constitute any warranty, express or implied. For the latest information, please feel free to check out our ocial website:www.katvr.com 04 Safety Instructions To avoid personal injuries or damage to the product, read and follow all product safety and operation instructions before using KAT loco. Pay special attention to safety warnings. If you allow others to use the product, you are responsible for ensuring that each user knows and follows all product safety and operation instructions. To avoid injuries, read and follow all instructions before using the product. Suitable users: The device is intended for use by healthy people aged 14 to 60. During the use of this device by minors, a guardian should always be present to ensure that they follow all safety instructions and do not experience any discomfort. VR headset: Make sure to read and follow all product instructions and warnings of the VR headset of your choice. Spatial safety: Remember, when using this product with a VR headset on, you can't see your actual surroundings. Images and events displayed in your VR Headset do not match the real world. Make sure to only use this product in a safe area with no obstacles. Do not use it near stairs, wide windows, heat sources, reservoirs and water tanks, outdoors or nearby any other objects that might pose a threat to your safety. Please, make sure that there are no people, furniture or any other things that hinder your movement in the selected play area. Pay special attention to children and pets. objects that might pose a threat to your safety: Please, make sure that there are no people, furniture or any other things that hinder your movement in the selected play area. Pay special attention to children and pets. Repetitive strain injuries: Please use this product in your comfortable position. When using this product, a single action might be repeated for a long time, what might result in nerves, tendon or muscle damage. If you experience pain, numbness, weakness, swelling, 05 burning or stiness, stop using the product and consult your doctor. Choking hazard: Do not leave small components that pose a suocation hazard to children or pets in easily accessible places where they can reach. Product use: Keep the product safely away from liquids or containers holding liquids. Do not place the product near re or heat sources, nor leave it directly exposed to the sun. Do not insert items into any openings of the product. Do not disassemble or modify this product or its accessories. To avoid mechanical damage, do not throw this product or its accessories. If the product overheats, gets damaged or cannot be used according to the safety instructions of this user's manual, please contact our technicians or your local distributor. Avoid using this product after a rapid temperature change. If the product is moved between environments with widely varying temperature or humidity level, condensation might cause water to form on the surface or inside the product. To avoid damage, please wait till the water evaporates before using the product. Turn it on, only after the product adapts to the room temperature. Before using the product, check if it's in a normal state without cracks, scratches or other abnormalities. Before connecting the product to the charger, please conrm that the actual voltage and current are the same as these mentioned in the product parameters in this manual. If the two do not match, do not connect it. Any disassembly or modication of this product without permission will result in instant termination of the product warranty. Cleaning: Using a damp cloth or water to clean the sensor surface is forbidden. Only a dry cloth can be used for that purpose. The straps can be cleaned with a damp cloth and dried before use. If symptoms such as itching, irritation, etc. appear, stop using the product and consult your doctor. Radio Frequency Interference: This product might emit radio waves that might 06 interfere with the operation of nearby electronic equipment. If you are wearing a pacemaker or any other implantable medical device, consult your doctor or your medical device manufacturer before using the product. In order to minimize radio frequency interference, use only accessories approved by the original manufacturer. Do not use at the same location, or together with any other antenna or transmitter. Avoid overuse: Avoid using the product for long periods of time without rest. It might have a negative impact on body coordination and balance which causes other negative eects. Frequent use of this product for extended periods of time may cause fatigue or pain of your muscles, joints or other parts of your body. Please take regular breaks during the use of this product. The amount of required rest and its frequency may vary from person to person. Use by children: This product is not designed for children. Please, keep it stored in a safe place where minors cannot reach it. Do not allow young children to use this product. Children might harm themselves or others, or accidentally damage the product. Battery warning: Your product contains built-in rechargeable batteries that cannot be replaced. Battery life will vary depending on frequency and method of use. Disposal of waste batteries that reached their product life should be carried out in accordance with local laws. If the local law does not regulate this matter, please discard your product in the trash can for electronics. Improper use of the batteries might pose a risk of re or chemical burns. Do not disassemble or expose the batteries to temperatures above 50 C

( 122 F). Keep them away from children. Health Warnings The following health warnings will be updated occasionally to ensure accuracy and completeness. 07 Pregnant women or those with epilepsy, cardiopulmonary diseases, history of mental illness (such as anxiety disorder, post-traumatic stress disorder etc), anemia or other serious health problems such as heart diseases, and those undergoing postoperative recovery or physical activity diculties are strictly prohibited from using the product. Because of physical limitations of human body, we do not recommend using this product for too long time without rest in order to avoid discomfort such as dazzling, dizziness or headache. Remember to take regular breaks, especially during the rst use to gradually adapt to virtual reality environment and increase the length of your gaming sessions step by step. It is recommended to use the product for no longer than 1 hour without rest. If you feel any discomfort when using the product, stop using it immediately and do not engage in any physical activities that pose safety hazards until the symptoms completely disappear. In case they persist, do not use the product until you consult the problem with your doctor. In case of fatigue, illness, hangover, alcohol or drugs intoxication, or any other discomfort, it is strictly forbidden to use this product, otherwise the symptoms might be aggravated. Anyone who uses this product is considered to have full civil capacity of conduct and must comply with the aforementioned matters. If you violate the above safety instructions or carry out other violations, it may cause personal injury or adverse consequences for which KAT VR will not be held responsible. Laws and Regulations Radiation Exposure Statement FCC Radiation Exposure Statement 08

(1). This product must not be co-located or used together with any other antenna or transmitter. FCC Warnings This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 09 PDF,http://www.jisupdfeditor.com/the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC RF Warning Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Warnings This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et.

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionne-ment. 10 EU Directives Compliance Statement This device complies with the 2014/53/EU Directive issued for wireless electronics by the European Electronic Communications Committee. This equipment operates in the following frequency range and the highest radio frequency power. Electronic Waste and RoHS compliance This equipment should not be disposed in a landll. Improper disposal of electronic products or their components may harm the environment. For more information on disposal and recycling of electronic equipment, please contact your local Civic Center, your Household Waste Disposal Center, the shop where you purchased the equipment or your local dealer. Product Introduction Product Description KAT loco is a foot-based VR locomotion system that gives complete physical control over lower-body actions, allowing the user to freely walk, run, and carry out just any other movement in virtual reality. 11 Product Appearance 1 L Signal Light 2 W Signal Light R Signal Light 3 4 Calibration Button 5 Macro USB Port 6 USB Port 7 Antennae 12 Product Parameters Serial number Suitable age Connection Signal range Supported actions Operating temperature Storage temperature Accepted humidity level Software Certicates Package size Gross weight 1.Please check our ocial website for the latest information. LC01 14-60 Bluetooth 4.2 3m walking, moving backwards, strang, turning around, crouching and using cruise control, etc. 0-40(32-104)

-5 - 50(23- 122)

- 5%-95% in non-condensing state KAT Gateway CB,CE,FCC,WEEE,RCM,IC 230*123*60mm

(L*W*H,9.06*4.84*2.36in) 400g(14.11oz) 1 13 Serial number Weight Total thickness Lithium Battery Battery capacity Charging voltage and current Charging time Battery life Lighting Housing material Waist sensor LC012 35g(1.23oz) 24mm(0.94in) Lithium-ion Polymer Battery 370mAh 5V 0.5A(2A MAX) About 1 hour 10hrs LED ABS 14 Ankle sensor LC011 35g(1.23oz) 50mm(1.97in) 24mm(0.94in) Lithium-ion polymer battery 370mAh 5V 0.5A(2A MAX) About 1 hour 10hrs LED ABS 20cm-35cm(7.87in-13.78in) 330mm10mm(Optional accessary) Serial number Weight Diameter Total thickness Battery Battery capacity Charging voltage and current Charging time Battery life Lighting Housing material Velcro Straps length Adjustable length for Velcro Strap Performance of the battery might vary depending on the frequency and method of use. Excessive use will reduce the product life. 15 Serial number Weight Size Housing material Port Rated Voltage Receiver LC013 80g(2.82oz) 112*99*74mm

(4.41*3.90*2.91in) ABS USB2.0 or above USB2.0 or above 5V 16 Complete list of items in a KAT loco package Remarks List of Items Quantity Look Name Waist Sensor Ankle Sensor Receiver Velcro Strap Multifunctional USB Wire USB Cable Owner's Manual Spare Part KAT Gateway 1 2 1 2 1 1 1 1 1 KAT Ioco OWNER'S MANUAL This product is for home use ONLY and NOT for the commercial use. Thank you for purchasing our product!

Please read this instruction manual carefully and keep it safely stored for future use. The dedicated software, refer to www.katvr.com for more information. Spare Part can be used to replace lost components. 17 PC Based Software Description Software Description KAT Gateway is our comprehensive software solution dedicated to users of KAT loco for the device management, and VR games support. With Gateway you can quickly connect KAT loco to your computer to view current connection status of the device and run available VR content. Thanks to its inSteam Turbo Mode, each compatible game will be automatically launched with an optimal settings conguration. KAT Gateway can automatically detect compatible VR games in your Steam library, and compatible VR les with .exe extension. You can also get access to KAT loco's control panel from either your computer screen or VR headset at any time to adjust multiple parameters to your liking, and make KAT loco a perfect VR input device for your needs. VR-integrated version of Gateway's control panel is only available when using SteamVR. 18 Software Download Please use your browser to log in to the following website and download necessary software https://www.katvr.com/pages/download First Use Instructions 01 01 Connecting: Take out the USB cable and the receiver, then connect it to your PC. Verify that the receiver is in good technical condition and launch the software. Notice about the receiver location: It is recommended for the receiver to be placed on a table in the open space, without any metal objects or any other large items blocking the connection with the sensors. 19 02 02.Pairing: Launch KAT Gateway, click 'Device Manager', and select

'Pair Sensor'. Then, follow the instructions on the screen and connect the sensors to your PC one by one according to the prompts to complete the pairing. The lighting signals described below signalize dierent operation modes of your KAT loco:

Recharging: Diming light Fully charged : Long bright signal Low power: Flashing with a long break Pairing: Quick ashing Firmware updating: ashing Unpairing: Slow ashing Sleep Mode/Power-o: Light o Left and Right Ankle Sensors: Firstly, nd the L/R signs on the sensors symbolizing which leg should you put them on. The sensor with left light on should be placed on your left ankle and vice versa. 20 L Signal Light R Signal Light 03. Waist sensor mag calibration: When used for the rst time, the waist sensor requires to collect the location data to complete the calibration process. Select 'Waist Mag Calibration' in KAT Gateway and follow the instructions on the screen. In order to start the calibration process,select 'Waist Mag Calibra-

tion' in KAT Gateway and follow the instructions on the screen. Note: I Mag calibration should be carried out at the actual location of use. II If you change your location, please re-calibrate the device. 04. Putting on the Ankle sensors:

I. Before putting the sensors onto your ankles you have to install the velcro straps on them. First, make sure that the loop side faces the outside, and then thread the velcro straps through the buckles at the backside of the sensors (Make sure you thread the entire strap till its end. Otherwise, improper placement of the sensor on your leg might inuence the operation of the device). 21 I Loop side facing the outside L Signal Light II R Signal Light II. Distinguish the left and right ankle sensors according to their signal lights. III III. Fasten the velcro straps tightening their ends. Note: The correct spot on your leg to put the sensors on: 5cm(about 3 ngers length) above your ankle. 22 II. Warning: The picture above shows improper placement of the sensors. Puting the sensors on upside down will disable their normal operation. Note: I. When taking the sensors o, just unfasten the straps. II. Do not remove the velcros from the buckles. 05. Putting on the Waist sensor:

I I. Gently pry open the sensor clip. 23 II II. When putting the sensor on, pay attention to the correct direction(The LED lights of the sensors should be directed upwards, while the charging port should face the oor). Note: I. If you let the sensor swing loosely, it may change position or drop aecting your walking direction. II. Make sure to x the sensor rmly to avoid these problems. II. The picture with red cross shows improper placement of the waist sensor. 06. Starting the Games Select the desired game mode in KAT Gateway and start the game. Note: I. Signal Range: 1m-2m; Recommended distance: 1.5m. 24 I 1.5m 2m Note: II. Make sure to only use this product in a safe area with no obstacles. Do not use it near stairs, wide windows, heat sources, reservoirs and water tanks, outdoors or nearby any other objects that might pose a threat to your safety. Please make sure that there are no other people, furniture or any other things that hinder your movement in the selected play area. Pay special attention to children and pets. 07 07. Waist sensor calibration: After starting a game (Please, conrm that SteamVR started as normal), put on your headset, keep your feet together and look straight to ensure the direction of your face is the same as the direction of your body. Then, press the 'Calibra-

tion Button' right at the center of the waist sensor (Or directly in the dashboard of KAT Gateway) to complete the calibration process. 25 08. Parameter Adjustment: When within a game, you can adjust the parameter settings of the sensors to your liking. All adjustments such as sensor sensitivity to walking or the way of triggering special actions (such as strang) can be made in' Controller Options' tab of KAT Gateway. Note: If your walking direction becomes deviated, rstly check if the waist sensor is in the correct position right in front of your waist. You may also need to re-caliberate your waist sensor (Refer to the step 07 for more details) and VR headset. 09. Quit the game and detach the sensors. 09 Note: The closer the distance between your body and the receiver, the better experience you will get. 26 Contact Information Phone Number: +86(0)571-86105373 E-mail Address: overseas@katvr.com Ocial Website: www.katvr.com Product Warranty Please check the warranty page for latest product warranty information and warranty application procedures. Should any unforeseen technical problem appear during the warranty period, please contact KAT VR or your local distributor. Please present the product receipt to the place of purchase or another place designated by KAT VR. KAT VR will decide whether to repair, replace or refund defective product according to circumstances. 27 WARRANTY CARD Number Customer Information Name Address Zip Code Product Information Name Serial No Warranty Period ONE YEAR of free repair service Repair Records ServiceDate Device Issue Product Condition Purchase Date Check the terms and conditions of the warranty online http://katvr.com/support/technical-support/

28

Compliance Certification Services

(Kunshan) Inc. Page:

1 of 3 External Photos Applicant:

Hangzhou Virtual And Reality Technology Co., LTD. Address of Applicant:

Room 901, Building 6, No,1818-2, West Wenyi Road, Yuhang Street, Yuhang District, Hangzhou, Zhejiang Province Equipment Under Test (EUT):

Product Name:

Model No.:

KAT loco LC012 Page 1 of 3 Compliance Certification Services

(Kunshan) Inc. Page:

2 of 3 Page 2 of 3 Compliance Certification Services

(Kunshan) Inc. Page:

3 of 3 End Page 3 of 3

Height of MIC logo:3.65mm 3.65mm label location RemarkThe product is small to place the FCC statement on the product and it be placed in the user manual which the device is marketed.

Hangzhou Virtual And Reality Technology Co., LTD. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Virtual And Reality Technology Co., LTD. Room 901,Building 6,No.1818-2,West Wenyi Road,Yuhang Street,Yuhang District, Hangzhou,Zhejiang Province Regarding:

Confidentiality Request regarding application for FCC ID 2AMVQ-LC01 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Printed Name Paul Lai TitleSales Company NameHangzhou Virtual And Reality Technology Co., LTD

Hangzhou Virtual And Reality Technology Co., LTD. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 25 October 2019 Regarding: 2AMVQ-LC01 To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services(KunShan) Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Compliance <<Hangzhou Virtual And Reality Technology Co., LTD.>>. This authorization is valid until further written notice from the applicant. Name (Printed): Paul Lai Signature:

Title:Sales On behalf of Company: Hangzhou Virtual And Reality Technology Co., LTD Telephone:0571-8866519