HANSONG HANSONG(NANJING) TECHNOLOGY LTD. BlueTooth Module HSBT070A Datasheet HANSONG (NANJING) TECHNOLOGY CO. , LTD. APROVED MANAGER CHECKED FILLED Customer. S.MANAGER MANAGER CHECKED CHIEF FILLED HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 1 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. Features Product Features:
Main Chipset : CSR8670CIBBHR
Bluetooth Spec V5.0 Compliant hardware
Class 2,Class 1 type Output Power
Support Firmware Upgrade
USB 1.1 and UART Host Interface
Multi-Configurable I2S, PCM or SPDIF Interface
Integrated Switched-Mode Regulator Integrated Battery Charger Integrated Microphone bias Integrated LED Driver
Built in 16-bit Stereo Codec- 95dB SNR for DAC
Factory configurable to either 1.8V or 3.3V supply.
16Mb internal flash memory (64-bit wide, 45ns);
optional support for 64Mb of external SPI flash
Support for 802.11 Co-existence
SBC, MP3, AAC, APTX decoder support.
HSP v1.2/ HFP v1.6/ A2DP v1.2/ AVRCP v1.4
Two antenna type(Ext. or PCB antenna)
RoHS compliant.
Size 18.5 x38 .5x3.0mm HSBT070A-EA: Ext. antenna HSBT070A-IA: PCB antenna
Ant. can be selected PCB and Ext. Antenna base on product request. Applications
Stereo Wireless Headsets.
Wired stereo headsets and headphones.
Portable stereo speakers.
Analog and USB Mulitmedia Dongle.
Home Audio System. HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 2 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. System Architecture HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 3 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. Pin Assignment Terminal Pin Name Pin Type Description 1. 2. 3. 4. 5. 6. 7. 8. 9. GND CAP0 CAP1 CAP2 CAP3 CAP4 CAP5 GND AIO0 GND Common Ground Analogue input Capacitive touch sensor input Analogue input Capacitive touch sensor input Analogue input Capacitive touch sensor input Analogue input Capacitive touch sensor input Analogue input Capacitive touch sensor input Analogue input Capacitive touch sensor input GND Common Ground Bidirectional Analogue programmable input / output Line HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 4 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. 10. AIO1 Bidirectional Analogue programmable input / output line 11. PCM_IN Bidirectional with weak Synchronous data input. pull-down Alternative function PIO[17]. 12. PCM_CLK Bidirectional with weak Synchronous data clock. pull-down Alternative function PIO[20]. 13. PCM_SYNC Bidirectional with weak Synchronous data sync. pull-down Alternative function PIO[19]. 14. PCM_OUT Bidirectional with weak Synchronous data output. 15. 16 GND RST#
pull-down Alternative function PIO[18]. GND Common Ground Input with strong pull-up Reset if low. Input debounced so must be low for >5ms to cause a reset. 17 SPI_CS#
Input with strong pull-up Chip select for SPI, active low 18. SPI_MISO Output with weak pulldown SPI data output 19 20 21 22 SPI_CLK Input with weak pulldown SPI clock SPI_MOSI Input with weak pulldown SPI data input GND RXD GND Common Ground Bidirectional with strong UART data input. pull-up 23 TXD Bidirectional with weak UART data output. pull-up 24 RTS Bidirectional with weak UART request to send, active low. pull-up Alternative function PIO[16]. 25 CTS Bidirectional with weak UART clear to send, active low. 26 27 GND LED0 pull-down GND Common Ground Open drain LED driver. Alternative function PO[29]. 28 LED1 Open drain LED driver. Alternative function PO[30]. 29 LED2 Open drain LED driver. Alternative function PO[31]. 30 PIO0 Bidirectional with weak Programmable input / output line pull-down 31 PIO1 Bidirectional with weak Programmable input / output line pull-down HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 5 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. 32 PIO2 Bidirectional with weak Programmable input / output line pull-down 33 PIO3 Bidirectional with weak Programmable input / output line 34 35. GND PIO4 pull-down GND Common Ground Bidirectional with weak Programmable input / output line pull-down 36. PIO5 Bidirectional with weak Programmable input / output line pull-down 37. PIO6/SCL Bidirectional with weak Programmable input / output line pull-down 38. PIO7/SDA Bidirectional with weak Programmable input / output line pull-down 39 PIO10 Bidirectional with weak Programmable input / output line pull-down 40 PIO11 Bidirectional with weak Programmable input / output line pull-down 41 PIO12 Bidirectional with weak Programmable input / output line 42 43 GND PIO13 pull-down GND Common Ground Bidirectional with weak Programmable input / output line pull-down 44 PIO14 Bidirectional with weak Programmable input / output line pull-down 45 PIO15 Bidirectional with weak Programmable input / output line 46 PIO21 Bidirectional with strong SPI flash clock. pull-down pull-down Alternative function PIO[21]. 47 PIO22 Bidirectional with strong SPI RAM clock. pull-down Alternative function PIO[22]. 48 PIO23 Bidirectional with strong SPI flash chip select. pull-up Alternative function PIO[23]
49 PIO24 Bidirectional with strong SPI RAM chip select. pull-up Alternative function PIO[24]. 50 PIO25 Bidirectional with strong Serial quad I/O flash data bit 0. pull-down Alternative function PIO[25]. 51 PIO26 Bidirectional with strong Serial quad I/O flash data bit 1. 52 53 GND PIO27 pull-down GND Alternative function PIO[26]. Common Ground Bidirectional with strong Serial quad I/O flash data bit 2. pull-down Alternative function PIO[27]
54 PIO28 Bidirectional with strong Serial quad I/O flash data bit 3. HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 6 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 GND USB_P USB_N GND pull-down GND Bidirectional Bidirectional GND Alternative function PIO[28]. Common Ground USB Data USB Data Common Ground VDDIO Power GPIO Level setting,VDDIO=1.8V,GPIO Level will be1.8V. VDDIO=3.3V,GPIO Level will be 3.3V. SMPS_BAT Power 1.8V and 1.35V switch-mode power supply regulator inputs. Must be at the same potential as VBAT. USB_3V3 Power Positive supply for USB ports VBAT_SEN Power Control Battery charger sense input CHG_EXT Power Control External battery charger control VCHG VBAT VREG GND MICR_N MICR_P BISB MICL_N MICL_P BISA SPKR_P SPKR_N SPKL_N SPKL_P GND Power Power Battery charger input Battery positive terminal Power Switch Regulator enable input GND Analogue in Analogue in Common Ground Microphone input positive, Right Microphone input negative, Right Analogue out Microphone bias B Analogue in Analogue in Microphone input negative, Left Microphone input positive, Left Analogue out Microphone bias A Analogue out Speaker output positive, right Analogue out Speaker output negative, right Analogue out Speaker output negative, Left Analogue out Speaker output positive, Left GND Common Ground General Specifications Recommended Operation Codiction Min Operating Temperature Range Supply Voltage, (VBAT) Supply Voltage, (VCHG)
-20C 2.5V 4.5V Max
+70C 4.2V 5.75V HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 7 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. RF Characteristics Receiver Units Min Typ Max Bluetooth Spec Sensitivity at 0.1% BER dBm
-
-90
-86 Maximum Receiver Signal dBm
-20
-10
-
C/I Co-Channel Adjacent Channel Selectivity C/I -1MHz 2nd Adjacent Channel Selectivity C/I -2MHz 3rd Adjacent Channel Selectivity C/I -3MHz Image Rejection C/I VBAT = 4.2V; f = 2.4441GHz; T=20C Transmitter RF Output Power RF Power Control Range RF Power Range Control Resolution 20dB Bandwidth for Modulated Carrier 2nd Adjacent Channel Power (+/- 2MHz) 3rd Adjacent Channel Power (+/- 3MHz) dB dB dB dB dB
-
-
-
-
-
6
-6 11 0
-38
-30
-45
-40
-16
-9
-70
-20 11 0
-30
-40
-9 Units Min Typ Max Bluetooth Spec dBm 0 9 16 24 0.5
-
-
-
0 to +10
> 16
-
940 1000
<1000
-36
-20
-45
-40
-20
-40 dB dB KHz dBm dBm
-
-
-
-
VBAT = 4.2V; f = 2.4441GHz; T=20C All specifications including pinouts and electrical specifications may be changed without prior notice HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 8 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. Dimension HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 9 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 10 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. La FCC des ltats-unis stipule que cet appareil doit tre en tout temps loign dau moins 20 cm des personnes pendant son functionnement. This device is intended for OEM integrators only. Please see the full grant of equipment document for restrictions. If the FCC ID of this module is not visible when it is installed inside another device, then the outside of the device into which the module is installed must be label with Contains FCC ID: XCO-HSBT070 and Contains IC: 7756A-HSBT070. This radio transmitter (Model: HSBT070A, FCC ID: XCO-HSBT070 IC:7756A-HSBT070) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Gain of antenna: 4.2 dBi max. Type of antenna: 50ohm, external Omni-directional, PIFA and internal PCB Antenna. Le prsent metteur radio (Model: HSBT070A, FCC ID: XCO-HSBT070 IC:7756A-HSBT070) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Gain d'antenne: 4.2 dBi maximal Type d'antenne: 50-ohm, external Omni-directional, PIFA and internal PCB Antenna.) HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 11 / 12 HANSONG HANSONG(NANJING) TECHNOLOGY LTD. Revision control Revision Author/Date Check by Approve by Remarks V1.0 Dany/2018-03-08 V2.0 Dany/2018-08-23 HSBT075 module_datasheet CONFIDENTIAL Version 1.0 Mar 08th 12 / 12