GoSpeak! Pro) x Ultra-Portable PA System nr eL VPS42U VP3520 vp3420 User's Guide_Revision_B_2014 07 _25.indd 1 ca 7/254 11:20 AM
| | | | || ee | |
p3420 User's Guide_Revision_B_2014_07_25indd 2 & 7254 11:20AM Introduction Congratulations on your purchase of the GoSpeak! Pro Ultra-
Portable PA System. This innovative public address system weighs less than 5 pounds and carries in a laptop tote-bag
(included). Set-up and break down of the GoSpeak! Pro takes just minutes. If you've purchased the GoSpeak! Pro with Wireless Microphone (model VP3420) it includes a wireless lapel microphone. The GoSpeak Pro with Wireless Microphone
(model V P3530) includes a handheld wireless microphone. Both models feature an integrated microphone receiver. Additional GoSpeak! Pro Wireless Microphones may be purchased (Lapel VP3421 and Handheld VP3521) for use with either model. The GoSpeak! Pro (model #VP3320) cannot be used with additional GoSpeak Wireless Microphones, but is compatible with third-party wireless microphone systems such as the Audio-Technica PRO 88W-830. Page 1 p3420 User's Guide_Revision_B_2014_07_25indd 1 & 7254 11:20AM eee | | le | TI Package Contents GoSpeak! Pro Model No. GoSpeak!
VP3320 VP3420 VP3520 Pro speaker integrated wireless microphone receiver Wireless Lapel Microphone Wireless Handheld Microphone Power cable Carrying case User's Guide Page 2
vp3420 User's Guide_Revision_B_2014 07_25.indd 2 @ 7/28N4 11:20 AM
| | | | || ee | |
Setting up GoSpeak! Pro Setting up your GoSpeak! Pro takes just minutes. Follow the steps below:
1. Unfold the GoSpeak! Pro speaker. 2. Plug the AC power cord into your GoSpeak! Pro, and then into the a 110-120v AC wall outlet. 3. Turn the Master Volume control on your GoSpeak!
Pro all the way counterclockwise (sound off). Note: avoid turnings on vour GoSpeak! Pro speaker until vou have connected your microphone. p3420 User's Guide_Revision_B_2014_07_25indd 3 & 7254 11:20AM The GoSpeak! Pro Control Panel Your GoSpeak! Pro control panel is located in the upper left quadrant of the left speaker (as shown) Components and controls include:
aay
<a Page vy9t20 Uber Guide Revsin 8 2014.67 psinca 4 @ esta 1120 4M
| ae | | |
1. Wireless microphone antenna and A/B microphone channel selector
(models VP3420 and VP3520 only) 2. Power light LED indicator 3. Master Volume control 4. Speaker MUTE switch with LED indicator 5. An ALC (automatic limiter control) switch Se SIRI star casa eae ra ce nal SEC St ERS Sateen eee Seemann reese 7. MIC 2 input volume control 8. Line IN input volume control 9. MIC 1 input (combination XLR and 4 microphone jack) 10. MIC 2 input (1/8 microphone jack) 11. LINE IN input (1/8 stereo input from computer, CD player, etc., or to receive signal from another GoSpeak! Pro speaker. 12. LINE OUT (1/8 jack to send signal to a recorder or a second GoSpeak! Pro speaker. Page 5. p3420 User's Guide_Revision_B_2014_07_25indd 5 & 7254 11:20AM oe | le |
Connecting Your Corded Microphone Your GoSpeak! Pro Speaker has four input/output ports: MIC 1, MIC 2, LINE IN, LINE OUT. 1. Connect your corded microphone into either MIC 1 or MIC 2 Sera eee: Gas PB tent eee Perea: ee a ee en ee ee ee ee MIC 1 (using with XLR or 4 phone plug connector). MIC 2 (using 1/8 phone plug connector). ii Led Ces Line rrr ae rx) aos VMICAICAICS
J}
2. Switch your microphone to the on position. 3. Turn on your GoSpeak! Pro Speaker and adjust microphone input volume. hm Sie La) Cry OFF Note: LINE IN is for connecting music or other input sources including additional GoSpeak! Pro speakers. The LINE OUT port is an output source for headphones, voice recorder or to send to additional GoSpeak! Pro speakers. Page 6 vp3420 User's Guide_Revision_B 2014 _07_25.indd 6 @ 7/284 11:20 AM ae le Connecting Multiple GoSpeak! Pros To coconnect multiple GoSpeak! Pro speakers, simply plug in a 1/8
(3.5mm) audio cable into the LINE OUT jack on the first GoSpeak!
and the other end into the LINE IN jack on the second GoSpeak! Pro as shown below:
Master GoSpeak!
LINE OUT Slave GoSpeak!
ate ree LINE IN Input and Speaker Volume Controls Your GoSpeak! Pro speaker comes with several controls to facilitate adinctine sional innit from vour micronhone or from other music OO OE EEE EEE SSE OO re sources. Additionally, the speaker has a MASTER Volume control, a speaker MUTE switch and an ALC (Auto Limiter Control) switch. The Auto Limiter Control (ALC) function helps eliminate distortion caused by microphone over-modulation. Page 7 vp3420 User's Guide_Revision_B_2014 07_25.indd 7 @ 7/25N4 11:20 AM WY OGLE PUSGIL $
au peusy]
ay} PUN og jyeadgo mod uo at ouueyo org jyeadgos ay) 0} jauue at} Uo Woy Jamog ayy BuIsn 9 70) AeM atp Te Jor uo aumyo, Jaysepy peupuey mod ur (papr ho ay aqqeua oy, Tayeads 04 pared Apearpe st auoqdoson 8 PPUISZ 20 Pl0g @ WoseY @ping sesn OzpEcA goat b JB OTUL SsafaMTM a0 0} JaurtoD Auo WED or jyeadgon,, qeyso st aumMjoa avoydororuL y2a1I09 UM]OA Josep at asvarUT A[MoTS 9 p auoydorotw g 10 Y aq} HORP,'S guoydoson roydoronu ssafauta nod Uo WIN], *p vads org jyeadgoy mod vo UY, *
(Jo punos) astayooparayunoo Jaypads og jyeadgo anos wny, 7 guoydoronu PUT) saLaeG VY OM} aUp [TeISUl "7 aq sdaqs x18 at MoTfoy guoydosorur
{ jYeadgoy sod yim AeatuoNapa U ppeypury ssayan jyeadgon nox duoydorI UH Ino} SuTj.0uUUO|
ee | | | |
Microphone Controls and LED Status Indicator Your GoSpeak! Pro Handheld Microphonehas three contol butons snd an LED satu indicator. Seedetsl deseiptions below Chane A swmch Baton Unesgoed Bunn (eine cepa) Power NYO Button e 1 ower Button d butter, Tg pn OW and OFF When pear tuned ON, he LED mde
(pl edad efor Scecnde snd De, tpn facing BIE en Ric ca ChannelA or GREEN hen micion damsel, The ED indiestore dk hen pour OFF 2, Channa Select Button (right butter) orerag te hanselseet atin vill arch hemseropoe sme hanneltermen chanel aan Hach ie isbn pms the LED nator fash redand be 6 eoonds and the, bag hing LUBA Mie Clamne A aero cr GnmENuben chizel Bi eco, ote theme buen onthe Gospel Pro Handheld Microphone, elude or eu derckpment cca wastrel mo a aeetaccaet ioe carias: sear oe | le |
Connecting Your Lapel Wireless Microphone
\. Your GoSpeak! wireless lapel microphone is already paired electronically with your GoSpeak! Pro speaker. To enable the microphone, follow the six steps below:
1. Install the AA batteries (included) in your lapel microphone transmitter box. 2. Turn your GoSpeak! Pro speaker Master Volume control all the way counterclockwise (sound off). 3. Plug your lapel microphone into your transmitter box and turn the box on. 4. Turn on your GoSpeak! Pro Speaker. 5.*Match the A or B microphone channel to the GoSpeak! Pro channel. 6. Slowly increase the Master Volume on your GoSpeak! Pro until the correct microphone volume is established.
*GoSpeak! Pro can only connect to one wireless mic at a time. Page 10 vp3420 User's Guide_Revision_B_2014_07_25.indd 10 @ 7/1254 11:20 AM
| ae | | |
Warranty SMK-Link Electronics Corporation (SMK-Link) warrants to the original end-user purchaser of the Product (you) that the Product, excluding batteries, will be free from defects in materials and workmanship under normal use and service for one-year from date of purchase. If the product becomes defective in materials or workmanship during the warranty period, SMK-Link will, at its option, either repair or replace it The replacement unit may be a more current or upgraded model if the originally purchased model is not available. Any Product repaired or replaced under the terms of the warranty is covered for the remainder of the original warranty period or ninety (90) days from the date of return shipment, whichever is longer. This warranty does not cover products which have been subjected to misuse, accident, physical damage, improper installation, abnormal operation or handlinge. neslect. inundation or fire or when product reeylator label has heen removed_ altered or rendered illegible; nor does it cover accessory or consumable items. SMK-Link shall not be liable for any indirect special, incidental, or consequential damages. SMK-Link total liability for damages for any cause related to, or arising out of, the use or inability to use the product shall not exceed the original price paid for the product even if SMK-Link has been informed of such possibility. If your product requires service under warranty, you must first contact SMK-Link product support to receive an RMA number. Shipping of defective units back to SMK-Link is at your expense. The contact information can be found on the SMK-Link website: www. smklink.com. This warranty does not affect your statutory rights and you may have other rights which vary from state to state and country to country. This warranty is understood to be the complete and exclusive agreement between the parties, superseding all prior agreements, oral or written, and all other communications between the parties relating to the matter of this warranty. The above warranty does not apply to products sold in Australia. Products sold in Australia by an authorized reseller will contain an Australia specific warranty statement. Page 11 p3420 User's Guide_Revision_B_2014_07_25indd 11 & 7254 11:20AM
@| Ei |
Regulatory Compliance FCC Certification This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. [exploitation est autorise aux deux conditions suivantes
: (1) Fappareil ne doit pas produire de brouillage, et (2) Putilisateur de fappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible lor compiance could void he users authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult a dealer or experienced radio/TV technician for help. Page 12 p3420 User's Guide_Revision_B_2014_07_25indd 12 & 7254 11:20AM
| ae | | |
MPE Requirements To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation.To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon 4 ce que la population ne puisse y tre expose a une distance de moin de 20 am. Installer les antennes de facon a ce que le personnel ne puisse approcher a 20 cm ou moins de la position centrale de I antenne. La FCC des ltats-unis stipule que cet appareil doit tre en tout temps loign dau moins 20 cm des personnes pendant son functionnement. Region Section Limited by local law regulations, version for North America does not have region selection option. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i..p.) is not more than that necessary for successful communication. Conformment a la rglementation dIndustrie Canada, le prsent metteur radio peutfonctionner avec une antenne d'un type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique alintention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.ite.) ne dpasse pas Tintensit ncessaire a ltablissement @une communication satisfaisante. Page 13 p3420 User's Guide_Revision_B_2014_07_25indd 13 & 7254 11:20AM
| ae | | |
CE Declaration of Conformity Manufacturer:
SMK-Link Electronics Corporation 3601-B Calle Tecate Camarillo, CA 93012 This equipment has been tested and found to comply with the limits of the European Council Directive 1999/5/EC. A complete Declaration of Conformity can be found at www.smklink.com age 14 p3420 User's Guide_Revision_B_2014_07_25indd 14 & 7254 11:20AM
| | | | || ee | |
Thank You Thank you for your purchase of the GoSpeak! Pro Ulta Portable PA System and for choosing SMK-Link Electronics to meet your presentation needs. We look forward to serving you in the future. To learn about new SMK-Link products as they become available, and to ensure the best possible customer support, please register your product online at www.smklink.com/register. VUPPULl SMK-Link Electronics Corporation 3601-B Calle Tecate Camarillo, CA 93012 TEL: (888) 696-3500 FAX: (805) 987-6665 Email: pcsupport@smkusa.com www.smklink.com 2014 SMK-Link Electronics Inc. SMK-Link, the SMK-Link logo and GoSpeak! are trademarks or registered trademarks of SMK-Link Electronics, Inc. All other trademarks are properties of their respective owners. Made in China. Page 15. p3420 User's Guide_Revision_B_2014_07_25indd 15 & 7254 11:20AM
| | | | || ee | |
age 16 p3420 User's Guide_Revision_B_2014_07_25indd 16 & 7254 11:20AM
| | | | || ee | |
p3420 User's Guide_Revision_B_2014_07_25indd 17 & 7254 11:20AM ol | | d|| Se |
vp3420 User's Guide_Revision_B_2014_07_25indd 18 ca 71254 11:20 AM