FCC ID: XCO-HSD81D82UT1 WR200 Wireless Extender (W001)

by: Hansong(Nanjing) Technology Ltd. latest update: 2011-09-02 model: HSD81D82UT1

One grant has been issued under this FCC ID on 09/02/2011 (this is one of eight releases in 2011 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked troubleshooting guides, warrantee terms, instructions, password defaults, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies			exhibits	applications
		manuals

all exhibits 11
1 ~ 2011-09-02 11

app s				submitted / available
1	User Manual 1	Users Manual	pdf	4.71 MiB	January 09 2011 / February 09 2011
1	User Manual 2	Users Manual	pdf	4.16 MiB	January 09 2011 / February 09 2011
1		Cover Letter(s)	pdf		January 09 2011 / February 09 2011
1		Cover Letter(s)	pdf		January 09 2011 / February 09 2011
1		External Photos	pdf		January 09 2011 / February 09 2011
1		Internal Photos	pdf		January 09 2011 / February 09 2011
1		ID Label/Location Info	pdf		January 09 2011 / February 09 2011
1		RF Exposure Info	pdf		January 09 2011 / February 09 2011
1		Test Report	pdf		January 09 2011 / February 09 2011
1		Test Report	pdf		January 09 2011 / February 09 2011
1		Test Setup Photos	pdf		January 09 2011 / February 09 2011

exhibit
download
text

User Manual 1

Users Manual

pdf

4.71 MiB

January 09 2011 / February 09 2011

WR200 wr200 wireless eXtender Owners manual manuel dutilisatiOn www.audiopro.com www.audiopro.se audio Pro aB sverige audio Pro , audio Pro logotypen, a symbolen, och ace-bass r registrerade varumrken av audio Pro aB, sverige. alla rttigheter reserverade. audio Pro fljer en policy om stndig produktutveckling. specifikationer kan ndras utan fregende meddelande. audio Pro aB sweden audio Pro, the audio Pro logotype, the a symbol, and ace-bass are all registered trademarks of audio Pro aB, sweden. all rights reserved. audio Pro follows a policy of continuous advancement in development. specifications may be changed without notice. Wireless extender Wr200 unit 1: FCC id: XCO-Hsd81d82ut1, unit 2: FCC id: XCO-Hsd81d82ut2, iC: 7756a-Hsd81d82ut1 iC: 7756a-Hsd81d82ut2 this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tV technician for help. to satisfy FCC rF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation. to ensure compliance, operations at closer than this distance is not recommended. the antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Pour satisfaire aux exigences de la FCC dexposition aux radiofrquences, une distance de sparation de 20 cm ou plus doit tre maintenue entre cet appareil et des personnes lors de fonctionnement du dispositif. Pour assurer la conformit des oprations au plus prs que cette distance nest pas recommande. Lantenne utilise pour ce transmetteur ne doit pas tre co-localiss en conjonction avec toute autre antenne ou trans-

metteur. Cet appareil est conforme la Partie 15 des rglements de la FCC. Lopration est soumise aux deux condi-

tions suivantes: (1) cet appareil ne peut causer dinterfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. imPOrtant saFetY instruCtiOns 1. read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. do not use this apparatus near water. 6. Clean only with a damp cloth. 7. do not block any ventilation openings. install in accordance with the manufacturers instructions. 8. do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. do not defeat the safety purpose of the polarized-type plug. a polarized plug has two blades with one wider than the other. the wide blade is provided for your safety. when the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manyfacturer. 12. use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. when cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. unplug this apparatus during lighting storms or when unused for long periods of time. 14. refer all servicing to qualified service personnel. servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. to reduce the risk of fire or electronic shock, do not expose this apparatus to rain or moisture. 16. the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. enGlisH Features

- extended room to room: up to 20m

- extended range same room: up to 50m

- extended range in line of sight: up to 100m

- wireless range between unit 1 & 2: 10-30m

- wireless full Cd quality sound

- sample rate: 48 KHz

- dedicated proprietary protocol

- master/zone volume relay sPeCiFiCatiOns type:

wireless extender for audio Pro network transmitting/receiving:

unit 1:

2.4GHz receiver + 5.8GHz transmitter unit 2:

5.8GHz receiver + 2.4GHz transmitter size wxHxd: 95x110x30mm OVerView & COntents wr200 unit 1 wr200 unit 2 House Code led indicates wireless status for 2.4GHz. solid blue for connection, flashing blue for lost connection. red for no wireless connection or no transmission. eX channel led indicates wireless status for 5.8GHz. solid blue for connection, flashing blue for lost connection. red for no wireless connection or no transmission. side: House Code switch Bottom: Power input and line output side: extender channel switch Connect to enclosed power adaptor Connect optional device with line input (stereo/receiver/

powered speakers). 2 x powersupply FunCtiOnalitY and PerFOrmanCe HOw wr200 wOrKs the wr200 system consists of two units, 1 and 2. unit 1 is the first unit and receives a signal (2.4GHz) from the tX100 transmitter and then relays the signal on a different band (5.8GHz) to unit 2. unit 2 then transmits the signal on the 2.4GHz band to all speakers. Because the 5.8GHz band is stronger but shorter in range than the 2.4GHz band, wr200 will work around any difficult conditions in a house that the wifi signal encounters. we also use the 5.8Ghz band to avoid 2.4GHz audio signal conflict. 2.4 GHz 5.8 GHz 5.8 GHz 2.4 GHz UNIT 1 Receives 2.4GHz Transmits 5.8GHz UNIT 2 Receives 5.8GHz Transmits 2.4GHz aVOidinG siGnal COnFliCts BY usinG HOuse COdes On each unit there are House Code and extender channel switches. when using wr200, it is important that unit 2 is set to a different House Code than that used by the tX100 transmit-

ter. this is because, if set to the same House Code, unit 1 will receive signals from both tX100 and unit 2 and will not know which signal to use. this would result in a conflict in signals and the wr200 would not function correctly. eXtender CHannel the wr200 has 3 different settings for the internal 5.8GHz channels. this feature makes it possible to use up to three wr200 systems in series in order to extend network even further. Or if your home has several wifi problems that need to be handled and circumvented. each pair of wr200s must be set to the same extender channel X,Y or Z. master and ZOne VOlume all speakers in the living series can handle master volumes and zone volumes. all volume commands are relayed via wr200. For example, if you have speakers connected before and after the wr200 in zone a, and if you adjust the volume on any speaker in zone a, all the speakers in zone a will be adjusted. the same principle applies for the master volume functionality, which adjusts all speakers on same House Code. wHen PlaCinG wr200 when you position units 1 and 2, you can use the led indicators as a guide. they show a continuous blue light to indicate that a connection has been established between transmitter and receiver. when correctly placed, all leds on both units 1 and 2 will show a continuous blue light. try different placements to achieve the best signal. the tX100 transmitter must be connected to a sound source and have a continuous blue light showing. the wr200 can be hung on a wall using the hole in the rear. BasiC COnneCtiOn all speakers located within range are set to the same House Code as the tX100. tX100 transmitter range: 20-100m unit 1 HOuse COde: same as on the tX100 transmitter ( 1, 2 or 3) unit 1 eXtender CHannel:

set to X, Y or Z Range: 15-30m unit 2 eXtender CHannel:

set to same channel X, Y or Z as on unit 1. unit 2 HOuse COde:

set to different House Code than tX100. example: set tX100 and unit 1 to House Code 1, set unit 2 to House Code 2 or 3. range: 20-100m set all lV-speakers to same House Code as unit 2 in order to receive a signal. eXamPle COnneCtiOns 1. eXtendinG netwOrK 2. BYPass diFFiCult wall COnditiOns 3. BYPass diFFiCult FlOOr COnditiOns 4. eXtendinG netwOrK in diFFerent direCtiOns unit 1 sending to two or more unit 2 modules.

(unit 2 (wer202) modules of wr200 are also sold separately. 5. eXtendinG netwOrK witH uP tO tHree wr200 sets A B C if using more than one wr200 set, use different extender channels (X, Z and Y) for all sets. Change the house code accordingly;

set a: receive house code 1, send house code 2. set B: receive house code 2, send house code 3. set C: receive house code 3, send house code 1. COnneCt deViCe direCtlY BY CaBle tO wr200 there is a line output on both unit 1 and 2. with this feature you can connect a stereo/

receiver or powered speakers directly to the wr200 via a cable. the devices will then play wireless audio at the same time as your wireless living speakers. note: You can connect any device with line input. Stereo/Receiver Powered speakers the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. imPOrtant saFetY instruCtiOns 1. read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. do not use this apparatus near water. 6. Clean only with dry cloth. 7. do not block any ventilation openings. install in accord-

ance with the manufacturers instructions. 8. do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-

fiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. unplug this apparatus during lightning storms or when unused for long periods of time. 12. refer all servicing to qualified service personnel. servicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. damage requiring service unplug the apparatus from the wall outlet and refer servic-

ing to qualified service personnel under thee following conditions:

a. when the power-supply cord or plug is damaged, B. if liquid has been spilled, or objects have fallen into the apparatus, C. if the apparatus has been exposed to rain or water, WArninG:

tO reduCe tHe risK OF Fire Or eleCtriC sHOCK, dO nOt eXPOse tHis aPParatus tO rain Or mOisture. CAUtiOn:

tO reduCe tHe risK OF eleCtriC sHOCK, dO nOt remOVe COVer (Or BaCK). nO user-serViCeaBle Parts inside. reFer serViCinG tO QualiFied serViCe PersOnnel. d. if the apparatus does not operate normally by following the operating instructions. adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation, e. if the apparatus has been dropped or damaged in any way, and F. when the apparatus exhibits a distinct change in per-

formance this indicates a need for service. 14. Object and liquid entry never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. the apparatus shall not be exposed to dripping or splash-

ing and no objects filled with liquids, such as vases shall be placed on the apparatus. dont put candles or other burning objects on top of this unit. 15. Batteries always consider the environmental issues and follow local regulations when disposing of batteries. 16. if you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation. leave 20 cm (8) of free space at the top and sides and 10 cm (4) at the rear. the rear edge of the shelf or board above the apparatus shall be set 10 cm (4) away from the rear panel or wall, creating a flue-like gap for warm air to escape. 17. the power supply and power cord for this apparatus is intended for indoor use only. 18. Only use the enclosed aC adaptor. Franais CARACTRISTIQUES

- Extension de la transmission dune pice lautre : jusqu 20 m

- Extension du champ au sein dune pice :

jusqu 50 m

- Extension du champ en visibilit directe :

jusqu 100 m

- Champ sans fil entre les units 1 et 2 : 10-30 m

- Son en qualit CD totalement sans fil

- Frquence dchantillonnage : 48 KHz

- Protocole propritaire ddi

- Volume relais commandes/zones APERU & CONTENU DESCRIPTIF type :

Prolongateur sans fil pour le rseau audio Pro transmission/rception :

unit 1 :

rcepteur 2,4 GHz + transmetteur 5,8 GHz unit 2 :

rcepteur 5,8 GHz + transmetteur 2,4 GHz dimensions (lxHxP) : 95x110x30 mm wr200 unit 1 wr200 unit 2 House Code : tmoin del Code maison indique le statut de la connexion sans fil pour 2,4 GHz. Bleu fixe : connexion tablie ; bleu clignotant : connexion perdue ; rouge : aucune connexion sans fil ou aucune transmission. eX channel : tmoin del Canal eX indique le statut de la connexion sans fil pour 5,8 GHz. Bleu fixe : connexion tablie ; bleu clignotant : connexion perdue ; rouge : aucune connexion sans fil ou aucune transmission. Ct : interrupteur Code maison Bas : entre alimentation et sortie de ligne Ct : interrupteur canal de prolongation raccordez ladaptateur de courant isol raccordez lappareil facultatif lentre de la ligne (stro/rcepteur/haut-

parleurs sous tension). 2 blocs dalimentation

exhibit
download
text

User Manual 2

Users Manual

pdf

4.16 MiB

January 09 2011 / February 09 2011

FOnCtiOnnalit et PerFOrmanCe FOnCtiOnnement du wr200 le systme wr200 est compos de deux units (1 et 2). lunit 1 est la premire unit. elle reoit un signal (2,4 GHz) du transmet-

teur tX100 et le relaie sur une bande diffr-

ente (5,8 GHz) vers lunit 2. lunit 2 transmet ensuite le signal sur la bande 2,4 GHz tous les haut-parleurs. en raison de la puissance suprieure de la bande 5,8 GHz, nanmoins plus faible porte que la bande 2,4 GHz, le wr200 contournera toutes les conditions difficiles que le signal wifi rencontrera dans la maison. nous utilisons la bande 5,8 Ghz galement en vue dviter tout conflit avec le signal audio 2,4 GHz. 2.4 GHz 5.8 GHz 5.8 GHz 2.4 GHz UNIT 1 Reoit 2,4 GHz Transmet 5,8 GHz UNIT 2 Reoit 5,8 GHz Transmet 2,4 GHz utilisatiOn de COdes maisOn POur Viter tOut COnFlit entre les siGnauX sur chaque unit se trouvent des interrupteurs de Code maison et de Canal de prolongation. lorsque vous utilisez le wr200, il est important de vous assurer que lunit 2 est paramtre sur un Code maison diffrent de celui utilis par le transmetteur tX100 ; sinon, lunit 1 recevra des signaux du tX100 et de lunit 2, sans savoir quel signal utiliser. Cette situation provoquerait un conflit entre les signaux et pourrait entraner le mauvais fonctionnement du wr200. Canal de PrOlOnGatiOn le wr200 prsente 3 paramtres diffrents pour les canaux internes 5,8 GHz. Cette caractristique permet dutiliser jusqu trois systmes wr200 en srie afin dagrandir le rseau davantage, ou dans le cas o votre maison prsente plusieurs problmes lis au wifi qui doivent tre traits et rsolus. Chaque paire de wr200 doit tre rgle sur le mme canal de prolongation, savoir X, Y ou Z. COmmande de VOlume PrinCiPal et de ZOne tous les haut-parleurs de la srie salon prennent en charge les commandes de volume principal et de zone. toutes les commandes de volume sont relayes par lintermdiaire du wr200. Par exem-

ple, si vos haut-parleurs sont raccords avant et aprs le wr200 en zone a, et si vous ajustez le volume sur nimporte quel haut-parleur en zone a, tous les haut-parleurs de la zone a seront rgls au mme niveau. le mme principe sapplique pour la fonctionnalit de commande de volume, qui permet dajuster tous les haut-parleurs dfinis daprs le mme Code maison. POsitiOnnement du wr200 lorsque vous positionnez les units 1 et 2, vous pouvez utiliser les voyants del pour vous guider. ils affichent une lumire bleue continue pour indiquer quune connexion a t tablie entre le transmetteur et le rcepteur. lorsquelles sont places correctement, toutes les del des deux units prsenteront une lumire bleue continue. dplacez les units jusqu ce que vous trouviez le meil-

leur signal. le transmetteur tX100 doit tre connect une source sonore et afficher une lumire bleue continue. le wr200 peut tre accroch au mur laide du trou plac larrire. BranCHements de Base tous les haut-parleurs compris dans le mme champ sont rgls sur le mme Code maison que le tX100. transmetteur tX100 Champ : 20-100m unit 1 House Code : le mme que celui du transmetteur tX100

(1, 2 ou 3) unit 1 extender channel :

rglage sur X, Y ou Z Champ : 15-30m unit 2 extender channel :

rglage sur le mme canal X, Y ou Z que sur lunit 1. unit 2 House Code :

rglage sur un Code maison diffrent de celui du tX100. exemple : Paramtrez le tX100 et lunit 1 sur le Code maison 1, et lunit 2 sur le Code maison 2 ou 3. Champ : 20-100m Pour recevoir un signal, rglez tous les haut-parleurs lV sur le mme Code maison que lunit 2. eXemPles de BranCHements 1. larGissement du rseau 2. COntOurnement des murs diFFiCiles traVerser 3. COntOurnement des sOls diFFiCiles traVerser 4. larGissement du rseau dans Plusieurs direCtiOns unit 1 : transmission vers deux ou plusieurs modules de lunit 2. (les modules de lunit 2

(wer202) du wr200 sont galement vendus sparment.) 5. larGissement du rseau aVeC JusQu trOis ensemBles de wr200 A B C si vous disposez de plus dun ensemble wr200, utilisez diffrents canaux de prolongation

(X, Z et Y) pour tous les ensembles et modifiez le code maison en consquence ;

ensemble a : rception du House Code 1, transmission du House Code 2. ensemble B : rception du House Code 2, transmission du House Code 3. ensemble C : rception du House Code 3, transmission du House Code 1. raCCOrd direCt de laPPareil laide dun CBle BranCH sur le wr200 Stereo/Receiver Powered speakers les units 1 et 2 possdent toutes les deux une sortie de ligne. Grce cette caractristique, vous pouvez raccorder des haut-parleurs stro/rcepteur ou sous tension directement au wr200 par le biais dun cble. les appareils liront ensuite les fichiers audio sans aucun cble en mme temps que vos haut-parleurs de la srie salon sans fil. remarque : Vous pouvez raccorder nimporte quel appareil possdant une entre de ligne. la lampe clignotante avec la pointe de flche comme symbole, dans un triangle quilatral, est prvue pour alerter lutilisateur de la prsence dune tension dan-

gereuse non isole lintrieur du botier du produit, qui peut tre suffisamment importante pour constituer un risque dlectrocution. le point dexclamation dans un triangle quilatral est prvu pour alerter lutilisateur de la prsence dinstructions importantes de maintenance et de rparation, dans la documentation jointe au produit. COnsiGnes de sCurit imPOrtantes 1. lisez ces instructions. 2. Conservez ces instructions. 3. respectez les avertissements. 4. suivez les instructions. 5. nutilisez pas cet appareil proximit de leau. 6. nettoyez-le uniquement avec un chiffon sec. 7. nobstruez pas les orifices de ventilation. installez-le conformment aux instructions du fabricant. 8. ninstallez pas lappareil proximit dune source de chaleur comme un radiateur, une bouche dair chaud, un four ou dautres appareils (y compris des amplificateurs) produc-

teurs de chaleur. 9. vitez de marcher sur le cordon dalimentation ou de le pincer, notamment au niveau des fiches, des prises et lendroit o il sort de lappareil. 10. utilisez uniquement des fixations/accessoires agrs par le fabricant. 11. dbranchez cet appareil pendant les orages ou en cas de non-utilisation prolonge. 12. adressez-vous au personnel qualifi pour les rpara-

tions. des rparations sont ncessaires lorsque lappareil a t endommag de quelque manire que ce soit, notamment si la fiche ou le cordon dalimentation est endommag, si du liquide a t renvers, si des objets sont tombs lintrieur de lappareil, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas correctement ou sil est tomb. 13. rparation des dommages dbranchez lappareil de la prise murale et adressez-vous au personnel qualifi dans les cas suivants:

a. lorsque la prise ou le cordon dalimentation est endom-

mag, B. si du liquide a t renvers ou si des objets sont tombs AttentiOn:

POur rduire les risQues dinCendie Ou dleCtrOCutiOn, ne Pas eXPOser Cet aPPareil la Pluie Ou lHumidit. AVertisseMent:

POur rduire les risQues dleCtrOCutiOn, ne Pas ter le COuVerCle

(Ou le dOs). auCune PiCe lintrieur ne Peut tre rPare Par lutilisateur. sadresser au PersOnnel QualiFi POur les rParatiOns. dans lappareil, C. si lappareil a t expos la pluie ou leau, d. si lappareil ne fonctionne pas normalement en suivant les instructions dutilisation. une utilisation ou un rglage inap propri des commandes dcrites dans les instructions dutilisation peut provoquer des dommages et ncessitera souvent un travail important de la part du personnel qualifi pour restaurer le fonctionnement normal de lappareil, e. si lappareil est tomb ou endommag de quelque manire que ce soit F. si lappareil montre un changement significatif de ses performances, cela indique une rparation ncessaire. 14. entre dobjet et de liquide ninsrez jamais dobjet quel quil soit dans lappareil travers les orifices, car il peut toucher des points dot dune tension dangereuse ou court-circuiter des pices et provoquer un incendie ou une lectrocution. lappareil ne doit pas tre expos au ruissellement ou aux claboussures et aucun objet rempli de liquide, comme un vase, ne doit tre plac sur lappareil. ne placez pas de bougies ou dautres objets brlants sur lappareil. 15. Batteries tenez toujours compte des problmes environnementaux et respectez les dispositions rglementaires locales lors de la mise au rebut des batteries. 16. si vous installez lappareil dans un endroit confin, comme une bibliothque ou un rack, assurez-vous quil est suffisamment ventil. laissez 20 cm despace libre au-dessus et sur les cts et 10 cm larrire. le bord arrire de ltagre ou du plateau au-dessus de lappareil doit tre situ au moins 10 cm du panneau arrire ou du mur, afin de crer un passage pour la sortie de lair chaud. 17. lalimentation et le cordon dalimentation de cet appareil sont prvus uniquement pour un usage lintrieur. 18. utilisez uniquement ladaptateur secteur fourni. wr200 wireless eXtender Owners manual manuel dutilisatiOn www.audiopro.com

		frequency	equipment class	purpose
1	2011-09-02	5736 ~ 5814	DTS - Digital Transmission System	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2011-09-02
1	Applicant's complete, legal business name	Hansong(Nanjing) Technology Ltd.
1	FCC Registration Number (FRN)	0018740043
1	Physical Address	8th Kangping Road
1		Nanjing, N/A 211100
1		China

app s	TCB Information
1	TCB Application Email Address	h******@acbcert.com
1	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1	Grantee Code	XCO
1	Equipment Product Code	HSD81D82UT1

app s	Person at the applicant's address to receive grant or for contact
1	Name	W**** W****
1	Title	General Manager
1	Telephone Number	0086-********
1	Fax Number	0086-********
1	E-mail	w******@hansong-china.com

app s	Technical Contact
1	Firm Name	Intertek Testing Services
1	Name	W**** W**
1	Physical Address	Bldg #86, 1198 Qinzhou Rd. North
1		Shanghai, 200233
1		China
1	Telephone Number	86-21******** Extension:
1	Fax Number	86-21********
1	E-mail	w******@intertek.com

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	DTS - Digital Transmission System
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	WR200 Wireless Extender (W001)
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	Intertek Testing Services Limited Shanghai
1	Name	J** J****
1	Telephone Number	86-21********
1	Fax Number	86-21********
1	E-mail	j******@intertek.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C		2412	2464	0.0394
1	2	15C		5736	5814	0.0214

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: PD9BE201D2 Intel Corporation ZZ2-P402W Amcrest Technologies LLC HLZA24006 Acer Incorporated T2C-RMDONGLE YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. 2AUYFRMX3943 Realme Chongqing Mobile Telecommunications Corp., Ltd.