SZ I G :55x55 mm Know about the SmaGateway adopting This smart gateway, kinds of smart sensors and smart home appliances works as the central user s home Wi-Fi network. controller. Built-in super low power consumption wireless technology, can work with to build a smart home system and the gateway Wi-Fi module support direct connection to Quick Installation Guide 2.Connect router(with internet) Gateway to outlet. mobile phone to your 2.4GHz Wi-F1 and plug in the Smart 1. (If the smart life APP on you have installed your mobile phone ,please below QR code or search Smart Life in APP Store or Google Play to install must register account first). go to step2)Scan APP(new user 3.(lf the blue LED is blinking,please Pressing blue LED blinks. the button for 5 seconds until the go to step4) gateway esW configonmode BlinkiThe FF:No network N:Connected connection to the Wi-Fi network Reset or enter Wi-fi configuration mode : Press and until the blue LED blinks,
-;m.01,_ hold the button for 5 seconds the gateway will enter Wi-fi conguration mode Im ing:ThegFF:Thegateway is under idle status
(1)
(2)
(3)
(4) 6.Press Done to finish the installation f g ateway. 4.Run Smart Life APP, Clickat the top right corner OptinONE:
automatically as below, It will be discovered click Go go add and follow the in-a pp instructions to your network. to connect the smart gateway OptinONE:
If it can t be discovered,please select Gateway Control-> Wireless Gateway(Bxx) to add it manually.then follow the in-a pp instructions to connect the smart gateway to your network. Devices to be added:
1 Gateway Do not add Gtadd
< Add Manually Auto Scan Lacge HorreAp. Small HomeAp ... Ga.te1ay Kitchec Gatewa, (Zibee) Apeliacces
/ wessMultifunctinr I asy
\.. BLE / (BL Gateway
Sm<ify&
VitieoSur. I I Entertairm
(Ga
.. 5.Waiting for a few seconds,you gateway is shown and you may rename it. can see the Done Added successfully 9 Gateway_ Device added successfully home
(5)
(6)
(7)
(8)
(9) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.