Happy Health Happy Ring User Manual V1.3 11/28/2021 Table of Contents Getting Started Support Safety Information Regulatory Information Product Specifications 3 3 4 5 6 Ring Model: HHR2110 Charger Model: HHCH2110 Getting Started 1. Remove the Happy Ring and Charger from the product packaging 2. Connect the charger to the supplied USB cable and plug the other end of the cable into a suitable USB-A outlet 3. Place the Happy Ring on the supplied charger to charge for at least 30 minutes 4. While the ring is charging, download and install the Happy Ring smartphone app 5. Once the ring has charged, remove it from the charger and place it on your finger 6. Open the Happy Ring smartphone app and follow the on screen instructions to complete the setup process For all set up and product support questions, please contact the Happy Health support team at the following address:
Support support@happy.ai Safety Information This product is not a medical device and should not be used to monitor, diagnose, treat, or prevent any medical condition. If you experience skin irritation following the use of this product, discontinue its use immediately and contact a dermatologist. This product is not a toy. Keep it away from children. Do not expose this product to excessive heat. Do not attempt to cut open or puncture this product. RF Exposure Information:
This device is designed and manufactured not to exceed the exposure limits set forth for an uncontrolled environment. Regulatory Information USA This product contains a lithium-ion battery. Ensure that disposal complies with all local laws and regulations. FCC ID: 2A3JJ-HAPPY2110 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device contains a radio transmitter and receiver. It has been designed to not exceed the RF exposure limits set by the FCC. Do not co-locate or use it in conjunction with other transmitters or antennas. Regulatory Information Canada Industry Canada ID: IC: 27894-HAPPY2110 IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en CAN ICES-003 (B)/NMB-003(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC Radiation Exposure Statement This EUT is very low power and compliant with IC CNR-102 exemption requirements. Ce MAE est trs faible puissance et de la conformit aux exigences d'exemption IC CNR-102. Product Specifications Outer ring material - High durability ceramic Inner ring materials - Bio-compatible polymers and metals Battery - Lithium polymer rechargeable (<1 W-hr) Charging time - Approximately 2 hours Connectivity - Bluetooth LE Water resistance - Water resistant to 1m Operating temperature - 0 to 55C / 32 to 131F