all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.31 MiB | April 14 2022 / October 11 2022 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 1.68 MiB | April 14 2022 / October 11 2022 | delayed release | ||
1 |
|
External Photos | External Photos | 500.08 KiB | April 14 2022 / October 11 2022 | delayed release | ||
1 |
|
Product Label | ID Label/Location Info | 135.43 KiB | April 14 2022 | |||
1 | Cover Letter(s) | April 14 2022 | ||||||
1 |
|
Permanent Confidentiality Request | Cover Letter(s) | 90.89 KiB | April 14 2022 | |||
1 |
|
RF Exposure | RF Exposure Info | 213.48 KiB | April 14 2022 | |||
1 |
|
Short-Term Confidentiality Request | Cover Letter(s) | 107.33 KiB | April 14 2022 | |||
1 | Cover Letter(s) | April 14 2022 | ||||||
1 |
|
Test Report | Test Report | 3.45 MiB | April 14 2022 | |||
1 |
|
Test Setup Photos (Conducted) | Test Setup Photos | 759.24 KiB | April 14 2022 / October 11 2022 | delayed release | ||
1 |
|
Test Setup Photos (Radiated) | Test Setup Photos | 1.08 MiB | April 14 2022 / October 11 2022 | delayed release |
1 | User Manual | Users Manual | 1.31 MiB | April 14 2022 / October 11 2022 | delayed release |
User Guide BTT55L Bluetooth Transmitter Multifunction Pairing Button LED Status Indicator Clear Memory Function Hold the pairing button for >10s will clear the pairing memory and place the transmitter in active pairing mode. LED will alternately flash red and blue. Note: After clearing the memory, the transmitter will cannot exit pairing mode until a headphone is paired. LED Indicator Connection Status Solid Red Solid Blue No Bluetooth Connection Headphones Connected Red and Blue Flashing Alternately Active Bluetooth Pairing Mode LED Off Transmitter Powered Off Gua del usuario Transmisor Bluetooth BTT55L DESCRIPCIN GENERAL DEL PRODUCTO Botn de pareado Indicador LED Funcin de borrado de memoria Si mantienes pulsado el botn de pareado durante >10 s, se borrar la memoria de pareado y el transmisor pasar al modo pareado activo. El indicador LED parpadear alternativamente en rojo y azul. Nota: despus de borrar la memoria, el transmisor no saldr del modo pareado activo hasta que unos primeros auriculares queden pareados. LED Indicator Estado de conexin Rojo fijo Azul fijo Sin conexin Bluetooth Auriculares conectados Rojo y azul parpadeando alternativamente Modo pareado activo LED apagado Transmisor apagado PRODUKTBERSICHT Anleitung BTT55L Bluetooth-
Sender Multifunktions-
Kopplungstaste LED-Anzeige Funktion zum Lschen des Speichers Halten Sie die Kopplungstaste > 10 Sek. lang gedrckt, um den Kopplungsspeicher zu lschen und den Transmitter in den aktiven Kopplungsmodus zu versetzen. Die LED-Anzeige blinkt dann abwechselnd rot und blau. Hinweis: Nach dem Lschen des Speichers beendet der Transmitter den aktiven Kopplungsmodus erst, wenn ein Kopfhrer gekoppelt ist. LED-Anzeige Verbindungsstatus Durchgehend rot Durchgehend blau Keine Bluetooth-
Verbindung Kopfhrer angeschlossen Abwechselnd rot und blau blinkend Aktiver Kopplungsmodus LED ausgeschaltet Sender ausgeschaltet Press pairing button on transmitter to power it ON Put headphones in active pairing mode Press pairing button on transmitter until LED indicator flashes alternately red and blue. Approximately 5 seconds Note: Transmitter will automatically enter pairing mode for initial pairing Transmitter will automatically connect to the strongest Bluetooth signal Once Bluetooth pairing is completed LED status indicator will illuminate solid blue Note: Do not try to connect multiple Bluetooth devices at the same time. Model Name: BTT55L Bluetooth Transmitter Input Voltage: 12VDC Input Current: 1A Frequency Response: 10Hz 20kHz Max Input Power: 60mW Weight: 28g Bluetooth Version 5.0 Supports: A2DP v1.3, aptX Bluetooth Transmitter Frequency Range:
2402 2480MHz Bluetooth Transmitter Power: <4dBm Bluetooth Transmitter Modulation:
GFSK, /4 DQPSK, 8DPSK Modulation Technology: BDR/EDR Transfer Rate: Max EDR up to 3Mbps Number of Channels: BT: 79 (0~78CH) Antenna Type: PCB Pulsa el botn de pareado del transmisor para encenderlo. Pon los auriculares en modo pareado activo. Pulsa el botn de pareado del transmisor hasta que el indicador LED parpadee alternativamente en rojo y azul por aproximadamente 5 segundos. Nota: el transmisor entrar automticamente en modo pareado activo para el pareado inicial. El transmisor se conectar automticamente a la seal Bluetooth ms fuerte. Una vez completado el pareado por Bluetooth, el indicador LED se iluminar en azul fijo. Nota: no intentes conectar varios dispositivos Bluetooth al mismo tiempo. Nombre del modelo: Transmisor Bluetooth BTT55L Tensin de entrada: 12 V CC Corriente de entrada: 1A Respuesta de frecuencia: 10Hz -20kHz Potencia de entrada mx.: 60mW Peso: 28 g Versin Bluetooth: 5.0 Compatibilidad: A2DP v1.3, aptX Rango de frecuencia del transmisor Bluetooth:
2402 2480MHz Potencia del transmisor Bluetooth: <4dBm Modulacin del transmisor Bluetooth:
GFSK, /4DQPSK, 8DPSK Tecnologa de modulacin: BDR/EDR Velocidad de transferencia: EDR mx. hasta 3 Mbps Nmero de canales BT: 79 (0~78 canales) Tipo de antena: PCB Kopplung mit Bluetooth-Kopfhrern Drcken Sie die Kopplungstaste am Sender, um ihn einzuschalten Versetzen Sie den Kopfhrer in den aktiven Kopplungsmodus Drcken Sie die Kopplungstaste am Sender, bis die LED-Anzeige abwechselnd rot und blau blinkt. Ca. 5 Sekunden Hinweis: Der Sender wechselt fr die erste Kopplung automatisch in den aktiven Kopplungsmodus Der Sender verbindet sich automatisch mit dem strksten Bluetooth-Signal Sobald die Bluetooth-Kopplung abgeschlossen ist, leuchtet die LED-Anzeige durchgehend blau Hinweis: Versuchen Sie nicht, mehrere Bluetooth-
Gerte gleichzeitig zu verbinden. Modellbezeichnung: BTT55L Bluetooth-Sender Eingangsspannung: 12 V Gleichspannung Eingangsstrom: 1 A Frequenzgang: 10 Hz20 kHz Belastbarkeitsgrenze: 60 mW Gewicht: 28 g Bluetooth-Version 5.0 Untersttzt: A2DP v1.3, aptX Bluetooth-Sendefrequenzbereich:
24022480 MHz Bluetooth-bertragungsleistung: < 4 dBm Bluetooth-Sendemodulation: GFSK,
/4 DQPSK, 8DPSK Modulationstechnologie: BDR/EDR bertragungsrate: Max. EDR bis zu 3 Mbit/s Anzahl der Kanle: BT: 79 (078 K.) Antennentyp: PCB PRODUCT OVERVIEW Pairing with Bluetooth Headphones Important Information Reconnection The transmitter will connect to the strongest Bluetooth signal. It is recommended to only pair headphones one at a time. The Transmitter does not support audio playback function, such as PLAY, STOP, PAUSE, FWD and RWD. Volume can be adjusted using volume button on headphone. The transmitter will automatically connect to the strongest Bluetooth signal. It is recommended to turn the Bluetooth transmitter ON prior to turning on headphones. It is not recommended to pair the same headphones to multiple vehicle transmitters. Additional Headphone Pairings The transmitter can be paired with up to eight different headphones. Follow the Bluetooth pairing steps to pair additional headphones. Bluetooth pairing mode can be cancelled by pressing the pairing button for 1 second. It is not recommended to pair the same headphones to multiple vehicle transmitters. PRSENTATION DU PRODUIT Guide de lutilisateur metteur Bluetooth BTT55L Bouton multifonction dappairage Voyant LED dtat Appairage avec des couteurs Bluetooth Appuyez sur le bouton dappairage de lmetteur pour le mettre sous tension. Mettez les couteurs en mode dappairage actif. Appuyez sur le bouton dappairage de lmetteur jusqu ce que le voyant LED clignote alternativement en rouge et bleu. Environ 5 secondes Remarque: lmetteur entrera automatiquement en mode dappairage actif pour lappairage initial. Lmetteur se connectera automatiquement au signal Bluetooth le plus fort. Une fois lappairage Bluetooth termin, le voyant LED restera allum en bleu continu. Remarque: nessayez pas de connecter plusieurs appareils Bluetooth en mme temps. Dsignation du modle : metteur Bluetooth BTT55L Tension dentre : 12 V CC Courant dentre : 1 A Rponse en frquence : 10 Hz 20 kHz Puissance dentre max. : 60 mW Poids : 28 g Version Bluetooth 5.0 Prise en charge : A2DP v1.3, aptX Gamme de frquences de lmetteur Bluetooth :
2 402 2 480 MHz Puissance de lmetteur Bluetooth : < 4 dBm Modulation de lmetteur Bluetooth :
GFSK, /4DQPSK, 8DPSK Technologie de modulation : BDR/EDR Taux de transfert : EDR max. jusqu 3 Mbit/s Nombre de canaux : BT : 79 (0 78 canaux) Type dantenne : carte de circuit imprim (PCB) The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. Model: Harman BTT55L FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 This device complies with part 15 of the FCC Rules and Innovation, Scientific, and Economic Development (ISED) Canada. license exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 CAUTION: Radio Frequency Radiation Exposure interference, and This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency
(RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body in normal use position.
(2) This device must accept any interference received, including interference that may cause undesired operation ZMB/ZICTA/ TA /2021/5/6 This Class B digital apparatus complies with Canadian ICES-003. Fonction deffacement de la mmoire Maintenez le bouton dappairage enfonc pendant plus de 10 s pour effacer la mmoire dappairage et mettre lmetteur en mode dappairage actif. Le voyant LED clignotera alternativement en rouge et bleu. Remarque : aprs avoir effac la mmoire, lmetteur ne quittera pas le mode dappairage actif jusqu ce quun couteur soit appair. Voyant LED tat de la connexion Rouge continu Aucune connexion Bluetooth Bleu continu couteurs connects Rouge et bleu clignotant alternativement Mode dappairage Bluetooth actif Voyant LED teint metteur hors tension Pareado con auriculares Bluetooth Informacin importante El transmisor se conectar a la seal Bluetooth ms fuerte. Se recomienda parear solo los auriculares de uno en uno. El transmisor no admite funciones de reproduccin de audio, como PLAY, STOP, PAUSE, FWD y RWD. El volumen se puede ajustar con el botn de volumen de los auriculares. Reconexin El transmisor se conectar automticamente a la seal Bluetooth ms fuerte.Se recomienda encender el transmisor Bluetooth antes de encender los auriculares.No se recomienda parear los mismos auriculares con varios transmisores. Modelo: Harman BTT55L FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 Este dispositivo cumple con la parte 15 de las normas de la FCC y los estndares RSS exentos de licencia de Innovation, Scientific, and Economic Development
(ISED) Canada Declaracin de conformidad para Mxico. La operacin de este equipo est sujeta a las siguientes dos condiciones:
Pareados de auriculares adicionales El transmisor se puede parear con hasta ocho auriculares diferentes. Sigue los pasos de pareado Bluetooth para parear auriculares adicionales. El modo pareado activo se puede cancelar pulsando el botn de pareado durante 1 segundo. No se recomienda parear los mismos auriculares con varios transmisores. Bluetooth
. Bluetooth Bluetooth
. Bluetooth
. PLAY
( ) PAUSE () STOP ()
.() RWD () FWD
. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 ZMB/ZICTA/ TA /2021/5/6 Harman BTT55L :
2AHPN-BE2863 :(FCC) 6434C-BE2863 :IC
(FCC) 15
. Innovation, Scientific, and Economic Development (ISED) Canada RSS
(1)
(2) 003
. ICES-
Bluetooth Bluetooth SIG, Inc. HARMAN International Industries, Incorporated
. Kopplung mit weiteren Kopfhrern Der Sender kann mit bis zu acht verschiedenen Kopfhrern gekoppelt werden. Befolgen Sie die Bluetooth-Kopplungsschritte, um weitere Kopfhrer zu koppeln. Der aktive Kopplungsmodus kann durch 1-sekndiges Drcken der Kopplungstaste abgebrochen werden. Es wird davon abgeraten, denselben Kopfhrer mit mehreren Fahrzeugsendern zu koppeln. PANORAMICA DEL PRODOTTO Guida per lutente Trasmettitore Bluetooth BTT55L Pulsante di accoppiamento Indicatore LED Funzione Cancella memoria Tenere premuto il pulsante di accoppiamento per pi di 10 secondi per cancellare la memoria di accoppiamento e mettere il trasmettitore in modalit di accoppiamento attivo. Lindicatore LED lampeggia alternativamente con colore rosso e blu. Nota: Dopo aver cancellato la memoria, il trasmettitore non uscir dalla modalit di accoppiamento attivo fino a quando non viene accoppiata una cuffia. Indicatore LED Stato connessione Rosso fisso Connessione Bluetooth assente Blu fisso Cuffie connesse Rosso e blu lampeggiano alternativamente Modalit di accoppiamento attivo LED spento Trasmettitore spento Accoppiamento con cuffie Bluetooth Premere il pulsante di accoppiamento sul trasmettitore per accenderlo Mettere le cuffie in modalit di accoppiamento attivo Premere il pulsante di accoppiamento sul trasmettitore finch la spia LED non lampeggia alternativamente con colore rosso e blu. Circa 5 secondi Nota: Il trasmettitore entra automaticamente in modalit di accoppiamento attivo per laccoppiamento iniziale Il trasmettitore si connetter automaticamente al segnale Bluetooth pi forte Una volta completata lassociazione Bluetooth, lindicatore LED emetter una luce blu fissa Nota: Non tentare di collegare pi dispositivi Bluetooth contemporaneamente. Nome modello: Trasmettitore Bluetooth BTT55L Tensione in ingresso: 12 V CC Corrente di ingresso: 1A Risposta in frequenza: 10Hz 20kHz Massima potenza in ingresso: 60mW Peso: 28g Versione Bluetooth 5.0 Supporta: A2DP v1.3, aptX Intervallo di frequenza trasmettitore Bluetooth:
2402 2480MHz Potenza del trasmettitore Bluetooth: <4 dBm Modulazione trasmettitore Bluetooth:
GFSK, /4 DQPSK, 8DPSK Tecnologia di modulazione: BDR/EDR Velocit di trasferimento: EDR max fino a 3 Mbps Numero di canali: BT: 79 (0~78CH) Tipo di antenna: PCB La marca y el logotipo Bluetooth son marcas registradas propiedad de Bluetooth SIG, Inc. Todo uso de los mismos por parte de HARMAN International Industries, Incorporated se hace con la debida licencia. Las dems marcas y nombres comerciales pertenecen a sus respectivos propietarios. Wichtige Sicherheitsinformationen Der Sender verbindet sich mit dem strksten Bluetooth-Signal. Es wird empfohlen, Kopfhrer jeweils nacheinander zu koppeln. Der Sender untersttzt keine Audiowie-
dergabefunktionen, wie z.B. PLAY, STOP, PAUSE, FWD und RWD. Die Lautstrke kann ber die Lautstrketaste am Kopfhrer eingestellt werden. Die Bluetooth-Wortmarke und -Logos sind eingetragene Marken von Bluetooth SIG, Inc. und jegliche Nutzung dieser Marken durch HARMAN International Industries, Incorporated erfolgt in Lizenz. Andere Warenzeichen oder Handelsbezeichnungen gehren den jeweiligen Eigentmern.
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Este aparato digital de Clase B cumple con la norma canadiense ICES-003. Wiederverbindung Der Sender verbindet sich automatisch mit dem strksten Bluetooth-Signal. Es wird empfohlen, den Bluetooth-Sender vor dem Einschalten des Kopfhrers einzuschalten. Es wird davon abgeraten, denselben Kopfhrer mit mehreren Fahrzeugsendern zu koppeln. Modell: Harman BTT55L FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 Dieses Gert erfllt Abschnitt 15 der FCC-Bestimmungen und dem/den lizenzfreien RSS-Standard(s) von Innovation, Scientific, and Economic Development (ISED) Canada. Der Betrieb unterliegt den folgenden beiden Bedingungen:
(1) Dieses Gert darf keine funktechnischen Strungen verursachen; und
(2) Dieses Gert muss smtliche Strungen aufnehmen knnen, darunter Strungen, die unerwnschte Funktionen des Gerts verursachen knnen Dieses digitale Gert der Klasse B entspricht der kanadischen Richtlinie ICES-003. Opnieuw aansluiten De zender maakt automatisch verbinding met het sterkste Bluetooth-signaal. Het wordt aanbevolen om de Bluetooth-zender AAN te zetten voordat u de koptelefoon inschakelt. Het wordt niet aanbevolen om dezelfde koptelefoon te koppelen aan meerdere voertuigzenders. Model: Harman BTT55LFCC-ID: 2AHPN-
BE2863 IC: 6434C-BE2863 Dit apparaat voldoet aan Deel 15 van de FCC-voorschriften en de RSS-norm(en) voor licentievrijstelling van Innovation, Scientific, and Economic Development (ISED) Canada Bediening is gebonden aan de volgende twee voorwaarden:
(1) dit apparaat mag geen schadelijke interferentie veroorzaken, en
(2) dit apparaat moet elke ontvangen interferentie aanvaarden, waaronder interferentie die een ongewenste werking kan veroorzaken Dit digitale Klasse B-apparaat voldoet aan de Canadese norm ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Aanvullende hoofdtelefoonkoppelingen De zender kan worden gekoppeld met maximaal acht verschillende koptelefoons. Volg de Bluetooth-koppelingsstappen om extra koptelefoons te koppelen. De actieve pairingmodus kan worden geannuleerd door 1 seconde op de koppelingsknop te drukken. Het wordt niet aanbevolen om dezelfde koptelefoon te koppelen aan meerdere voertuigzenders. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 PRODUCTOVERZICHT Koppelen met Bluetooth-koptelefoons Belangrijke informatie Handleiding BTT55L Bluetooth-
zender Koppelingsknop Ledlampje Functie geheugen wissen Houd de koppelknop > 10 s ingedrukt om het koppelgeheugen te wissen en de zender in de actieve pairingmodus te zetten. Ledlampje knippert afwisselend rood en blauw. Opmerking: Na het wissen van het geheugen verlaat de zender de actieve koppelingsmodus niet totdat er een koptelefoon is gekoppeld. Ledlampje Verbindingsstatus Ononderbroken rood Bluetoothaansluiting Ononderbroken blauw Koptelefoonaansluiting Afwisselend rood en blauw knipperend Actieve pairingmodus Led uit Zender uitgeschakeld Druk op de koppelingsknop op de zender om deze in te schakelen. Zet de koptelefoon in de actieve pairingmodus. Druk op de koppelingsknop op de zender totdat het led lampjeafwisselend rood en blauw knippert. Ongeveer 5 seconden. Opmerking: De zender gaat automatisch naar de actieve koppelingsmodus voor de eerste koppeling. De zender maakt automatisch verbinding met het sterkste Bluetooth-signaal. Zodra de Bluetooth-koppeling is voltooid, gaat het ledlampjecontinu blauw branden. Opmerking: Probeer niet om meerdere Bluetooth-apparaten tegelijkertijd te verbinden. Modelnaam: BTT55L Bluetooth-zender Ingangsspanning: 12 V gelijkstroom Ingangsstroom 1 A Frequentierespons: 10 Hz -20 kHz Max. ingangsvermogen: 60 mW Gewicht: 28 g Bluetooth versie 5.0 Ondersteunt: A2DP v1.3, aptX Frequentiebereik Bluetooth-zender:
24022480MHz Bluetooth-zendervermogen: < 4 dBm Modulatie Bluetooth-zender: GFSK, /4 DQPSK, 8DPSK Modulatietechnologie: BDR/EDR Overdrachtssnelheid: Maximaal EDR tot 3 Mbps Aantal kanalen: BT: 79 (0~78CH) Antennetype: Printplaat De zender maakt verbinding met het sterkste Bluetooth-signaal. Het wordt aanbevolen om de koptelefoons n voor n te koppelen. De zender ondersteunt geen afspeelfunctie voor audio, zoals PLAY, STOP, PAUZEREN, VOORUIT en ACHTERUIT SPOELEN. Het volume kan worden aangepast met de volumeknop op de koptelefoon. Het Bluetooth-woordmerk en de bijbehorende logos zijn gedeponeerde handelsmerken van Bluetooth SIG, Inc. en elk gebruik van dergelijke merken door HARMAN International Industries, Incorporated gebeurt onder licentie. Overige handelsmerken en handelsnamen zijn eigendom van de respectieve eigenaren. PRODUKTVERSIKT Ihopparning med Bluetooth-hrlurar Viktig information teranslutning Anvndarhandbok BTT55L Bluetooth-
sndare Ihopparningsknapp LED-indikator Aktivera sndaren genom att trycka p ihopparningsknappen Aktivera hrlurarnas ihopparningslge Tryck p ihopparningsknappen p sndaren tills LED-indikatorn blinkar vxelvis rtt och bltt. Cirka 5 sekunder Obs: Sndaren stts automatiskt i ihopparningslge fr initial ihopparning. Sndaren ansluter automatiskt till den starkaste Bluetooth-signalen Nr ihopparningen via Bluetooth r klar lyser LED-indikatorn med fast bltt sken Obs: Frsk inte att ansluta flera Bluetooth-
enheter samtidigt. Sndaren ansluter automatiskt till den starkaste Bluetooth-signalen. Vi rekommenderar att du endast parar ihop hrlurarna en i taget. Sndaren har inte std fr ljuduppspelning, t.ex. PLAY, STOP, PAUSE, FWD och RWD. Volymen kan justeras med volymknappen p hrlurarna. Sndaren ansluter automatiskt till den starkaste Bluetooth-signalen. Bluetooth-sndaren br aktiveras frst och drefter hrlurarna. Samma hrlurar br inte paras ihop med flera fordonssndare. Funktion fr att rensa minnet Hll ihopparningsknappen intryckt
>10 s fr att rensa ihopparningsminnet och stta sndaren i ihopparningslge. LED-indikatorn blinkar vxelvis rtt och bltt. Obs: Nr minnet har rensats lmnar sndaren inte ihopparningslge frrn hrlurarna har parats ihop. LED-indikator Anslutningsstatus Fast rtt sken No Bluetooth Connection Fast bltt sken Hrlurar anslutna Blinkande vxelvis rtt och bltt Aktivt ihopparningslge Modellbeteckning: BTT55L Bluetooth-sndare Inspnning: 12V DC Ingngsstrm: 1A Frekvenstergivning: 1020000Hz Max ingngseffekt: 60mW Vikt: 28g Bluetooth-version 5.0 Std: A2DP V1.3, aptX Bluetooth-sndarens frekvensomrde:
LED av Sndare avstngd 24022480MHz Bluetooth-ordmrket och - logotypen r registrerade varumrken som tillhr Bluetooth SIG Inc. och all anvndning av sdana mrken av HARMAN International Industries Inc. sker p licens. Andra varumrken och varumrkesnamn tillhr respektive gare. Bluetooth-sndarens effekt: <4dBm Bluetooth-sndarmodulering: GFSK, /4 DQPSK, 8DPSK Moduleringsteknik: BDR/EDR verfringshastighet: Max EDR upp till 3Mb/s Antal kanaler: BT: 79 (0~78CH) Antenntyp: PCB Modell: HARMAN BTT55L FCC-ID: 2AHPN-BE2863 IC-ID: 6434C-BE2863 Denna enhet uppfyller kraven i avsnitt 15 i FCC-reglerna samt Industry Canadas licensundantag RSS standard. Fr anvndning gller fljande villkor:
(1) Denna enhet fr inte orsaka skadlig strning och
(2) Denna enhet mste acceptera alla strningar som mottas, inklusive strningar som kan orsaka onskad drift Denna digitala apparat i klass B uppfyller kanadensiska ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Informations importantes Lmetteur se connectera au signal Bluetooth le plus fort. Il est recommand de nappairer quun seul couteur la fois. Lmetteur ne prend pas en charge la fonction de lecture audio, telle que PLAY (LECTURE), STOP (ARRT), PAUSE (PAUSE), FWD (AVANT) et RWD
(ARRIRE). Le volume peut tre rgl laide du bouton du volume situ sur lcouteur. Reconnexion Lmetteur se connectera automatiquement au signal Bluetooth le plus fort. Il est recommand dallumer lmetteur Bluetooth avant dallumer les couteurs. Il nest pas recommand dappairer les mmes couteurs plusieurs metteurs de vhicules. Appairage dcouteurs supplmentaires Lmetteur peut tre appair avec jusqu huit couteurs diffrents. Suivez les tapes dappairage Bluetooth pour appairer des couteurs supplmentaires. Le mode dappairage Bluetooth peut tre annul en appuyant sur le bouton dappairage pendant 1 seconde. Il nest pas recommand dappairer les mmes couteurs plusieurs metteurs de vhicules. La marque et les logos Bluetooth sont des marques dposes et sont dtenues par Bluetooth SIG, Inc., et tout usage de ces marques par HARMAN International Industries, Incorporated se fait sous accord de licence. Les autres marques de commerce et noms commerciaux appartiennent leurs propritaires respectifs. Modle : Harman BTT55L ID FCC : 2AHPN-BE2863 ID IC : 6434C-BE2863 Cet appareil est conforme la partie 15 des rgles de la FCC et la ou aux normes RSS exemptes de licence dIndustry Canada. Son utilisation est soumise aux deux conditions suivantes :
(1) cet appareil ne doit pas causer dinterfrences nuisibles, et
(2) cet appareil doit accepter toute interfrence, y compris celles pouvant causer un fonctionnement inappropri. Cet appareil numrique de classe B est conforme la norme canadienne ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Bluetooth 5 . LED
Bluetooth LED Bluetooth Bluetooth :
BTT55L Bluetooth :
12 :
1 :
20 10 :
60 :
28 :
Bluetooth 5.0 aptX, AVRCP v1.6 :
2402 2480 : Bluetooth 4< :Bluetooth GFSK, /4 DQPSK, :Bluetooth 8DPSK BDR/EDR :
3 EDR :
BT: 79 (0~78CH) :
PCB :
LED BTT55L Bluetooth LED Bluetooth LED 10 LED .
Informazioni importanti Riconnessione Il trasmettitore si connetter al segnale Bluetooth pi forte. Si consiglia di accoppiare un solo paio di cuffie alla volta. Il trasmettitore non supporta la funzione di riproduzione audio, come PLAY, STOP, PAUSE, FWD e RWD. Il volume pu essere regolato utilizzando il pulsante del volume sulle cuffie. Il trasmettitore si connetter automaticamente al segnale Bluetooth pi forte. Si consiglia di accendere il trasmettitore Bluetooth prima di accendere le cuffie. Si sconsiglia di accoppiare le stesse cuffie a pi trasmettitori per veicoli. Accoppiamento di cuffie aggiuntive Il trasmettitore pu essere accoppiato a un massimo di otto cuffie diverse. Seguire i passaggi di accoppiamento Bluetooth per accoppiare altre cuffie. La modalit di accoppiamento attivo pu essere annullata premendo il pulsante di accoppiamento per 1 secondo. Si sconsiglia di accoppiare le stesse cuffie a pi trasmettitori per veicoli. Il marchio e i loghi Bluetooth sono marchi registrati di propriet di Bluetooth SIG, Inc. e qualsiasi utilizzo di tale marchio da parte di HARMAN International Industries, Incorporated concesso in licenza. Altri marchi registrati o nomi commerciali appartengono ai rispettivi proprietari. Modello: Harman BTT55L ID FCC: 2AHPN-BE2863 ID IC: 6434C-BE2863 Questo dispositivo conforme alla parte 15 delle norme FCC e alle specifiche per standard radio RSS di Innovation, Scientific, and Economic Development (ISED) Canada per dispositivi esenti da licenza. Il funzionamento soggetto alle due condizioni seguenti:
(1) Questo dispositivo non deve generare interferenze pericolose e
(2) deve accettare qualunque interferenza ricevuta, incluse le interferenze che potrebbero causare un funzionamento indesiderato Questo apparato digitale di Classe B conforme alla normativa canadese ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Ihopparning med flera hrlurar Sndaren kan paras ihop med upp till tta hrlurar. Flj stegen fr ihopparning via Bluetooth fr ihopparning med fler hrlurar. Ihopparningslget kan avbrytas genom att ihopparningsknappen hlls intryckt i 1 sekund. Samma hrlurar br inte paras ihop med flera fordonssndare. VISO GERAL DO PRODUTO Emparelhamento com fones de ouvido Bluetooth Informaes importantes Reconexo Pressione o boto de emparelhamento no transmissor para lig-lo. Coloque os fones de ouvido no modo de emparelhamento ativo. Pressione o boto de emparelhamento no transmissor at que o indicador de LED pisque alternadamente em vermelho e azul. Aproximadamente 5 segundos. Observao: o transmissor entrar automaticamente no modo de emparelhamento ativo para emparelhamento inicial. O transmissor se conectar automaticamente ao sinal Bluetooth mais forte. Quando o emparelhamento Bluetooth estiver concludo, o indicador de LED ficar em azul constante. O transmissor se conectar ao sinal Bluetooth mais forte. recomendvel emparelhar apenas um par de fones de ouvido por vez. O transmissor no compatvel com a funo de reproduo de udio, como REPRODUZIR, PARAR, PAUSAR, AVANAR e VOLTAR. O volume pode ser ajustado usando o boto de volume no fone de ouvido. O transmissor se conectar automaticamente ao sinal Bluetooth mais forte. recomendvel ligar o transmissor Bluetooth antes de ligar os fones de ouvido. No recomendado emparelhar os mesmos fones de ouvido com transmissores de vrios veculos. Observao: no tente conectar vrios dispositivos Bluetooth ao mesmo tempo. Nome do modelo: Transmissor Bluetooth BTT55L Tenso de entrada: 12 VCC Corrente de entrada: 1A Resposta de frequncia: 10Hz a 20kHz Potncia mxima de entrada: 60 mW Peso: 28 g Verso Bluetooth 5.0 Compatvel com: A2DP v1.3, aptX Intervalo de frequncia do transmissor Bluetooth: 2402 a 2480MHz Potncia do transmissor Bluetooth: <4 dBm Modulao do transmissor Bluetooth:
GFSK, /4 DQPSK, 8DPSK Tecnologia de modulao: BDR/EDR Taxa de transferncia: EDR mx. at 3Mbps Nmero de canais: BT: 79 (0 a 78 canais) Tipo de antena: PCB As marcas nominativas e logotipos Bluetooth so marcas registradas de propriedade da Bluetooth SIG, Inc., e qualquer uso de tais marcas pela HARMAN International Industries, Incorporated realizado mediante licena. Outras marcas e nomes comerciais pertencem a seus respectivos titulares. Modelo: Harman BTT55L FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 Este dispositivo est em conformidade com a Parte 15 das normas da FCC e com os padres RSS isentos de licena da Industry Canada. A operao est sujeita a ambas as condies a seguir:
(1) Este aparelho no deve causar interferncias prejudiciais, e
(2) Este aparelho deve aceitar quaisquer interferncias recebidas, inclusive interferncias capazes de causar operao indesejvel. Este aparelho digital de Classe B cumpre a norma canadense ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Emparelhamentos de fones de ouvido adicionais O transmissor pode ser emparelhado com at oito fones de ouvido diferentes. Siga as etapas de emparelhamento de Bluetooth para emparelhar fones de ouvido adicionais. O modo de emparelhamento ativo pode ser cancelado ao pressionar o boto de emparelhamento por 1 segundo. No recomendado emparelhar os mesmos fones de ouvido com transmissores de vrios veculos. BTT55L Bluetooth LED Bluetooth LED 5 Bluetooth Bluetooth LED Bluetooth 1 Bluetooth PLAY STOP FWD PAUSE RWD Bluetooth Bluetooth 1 BTT55L Bluetooth 12VDC 1A 10Hz 20kHz 60mW 28g Bluetooth 5.0 A2DP v1.3 2480MHz aptX Bluetooth 2402 Bluetooth Bluetooth
/4-DQPSK 8DPSK GFSK
<4dBm BDR/EDR BT EDR 3Mbps 79 (0~78CH) Bluetooth Incorporated Bluetooth SIG, HARMAN International Inc. Industries, Harman BTT55L 2AHPN-BE2863 6434C-BE2863 FCC ID IC ID FCC RSS 2
(1) 15
(2) B 003 ICES-
Pareado con audfonos Bluetooth Informacin importante Reconexin El transmisor se conectar a la seal Bluetooth ms potente. Se recomienda parear audfonos solo de a uno a la vez. El transmisor no admite las funciones de reproduccin de audio, como reproducir, detener, pausar, avanzar y retroceder. El volumen puede ajustarse con el botn de volumen en los audfonos. El transmisor se conectar automticamente a la seal Bluetooth ms potente. Se recomienda encender el transmisor Bluetooth antes de encender los audfonos. No se recomienda parear los mismos audfonos a varios transmisores vehiculares. 8 Bluetooth 1 1 CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Pareados de audfonos adicionales El transmisor se puede parear con un mximo de ocho audfonos diferentes. Siga los pasos de pareado Bluetooth para parear audfonos adicionales. El modo pareado activo puede cancelarse presionando el botn de pareado durante 1 segundo. No se recomienda parear los mismos audfonos a varios transmisores vehiculares. 10 LED LED Bluetooth LED DESCRIPCIN GENERAL DEL PRODUCTO Gua del usuario Transmisor Bluetooth BTT55L Botn de pareado Indicador LED Information importante Reconnexion Jumelage dcouteurs supplmentaires Lmetteur se connectera au signal Bluetooth le plus puissant. Il est recommand de napparier quune paire dcouteurs la fois. Lmetteur ne prend pas en charge les fonctions de lecture audio, comme JOUER, ARRT, PAUSE, AVANCE(FWD) et RETOUR(RWD). Le volume peut tre rgl laide du bouton de volume des couteurs. Lmetteur se connectera automatiquement au signal Bluetooth le plus puissant. Il est recommand dactiver lmetteur Bluetooth avant de mettre les couteurs sous tension. Il nest pas recommand dapparier les mmes couteurs plusieurs transmetteurs de vhicule. Lmetteur peut tre jumel avec huit couteurs diffrents. Suivez les tapes de jumelage Bluetooth pour apparier des couteurs supplmentaires. Le mode de jumelage actif peut tre annul en appuyant sur le bouton de jumelage pendant une seconde. Il nest pas recommand dapparier les mmes couteurs plusieurs transmetteurs de vhicule. Le nom et les logos Bluetooth sont des marques dposes dtenues par Bluetooth SIG, Inc., et tout usage de ces marques par HARMAN International Industries Incorporated se fait sous contrat de licence. Toutes autres marques de commerce ou noms de commerce sont la proprit exclusive de leurs propritaires respectifs. Modle : Harman BTT55L ID FCC : 2AHPN-BE2863 ID IC : 6434C-BE2863 Cet appareil est conforme la partie 15 des rgles de la FCC, ainsi quaux normes RSS exemptes de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes :
(1) Cet appareil ne doit pas provoquer dinterfrences nuisibles; et
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles susceptibles dentraner un dysfonctionnement de lappareil. Cet appareil numrique de classe B est conforme la norme canadienne ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Funcin de borrado de memoria Mantener presionado el botn de pareado durante ms de 10 segundos borrar la memoria de pareado y pondr el transmisor en modo pareado activo. El indicador LED parpadear de forma alternada entre rojo y azul. Nota: Despus de borrar la memoria, el transmisor no saldr del modo pareado activo hasta que los audfonos estn pareados. Indicador LED Estado de conexin Rojo continuo Sin conexin Bluetooth Azul continuo Audfonos conectados Rojo y azul parpadean de forma alternada Modo pareado activo LED apagado Transmisor apagado La marca denominativa y los logotipos Bluetooth son marcas registradas de propiedad de Bluetooth SIG, Inc., y cualquier uso de dichas marcas por parte de HARMAN International Industries, Incorporated, se realiza bajo licencia. Otras marcas y nombres comerciales pertenecen a sus respectivos propietarios. Modelo: Harman BTT55L FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 Este dispositivo cumple con la parte 15 de las reglas de la FCC (Federal Communications Commission [Comisin Federal de Comunicaciones]) y con los estndares RSS exentos de licencia de IC (Industry Canada). Su funcionamiento est sujeto a las dos condiciones siguientes:
(1) este dispositivo no puede ocasionar una interferencia nociva; y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluso interferencia ocasionada por el funcionamiento no deseado. Este equipo digital Clase B cumple con la norma ICES-003 de Canad. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 Bluetooth
. 5
. Bluetooth Bluetooth Bluetooth. PLAY, STOP, PAUSE, FWD RWD. Bluetooth. Bluetooth-. Bluetooth,
, 1 . BTT55L LED LED LED 5 Presione el botn de pareado en el transmisor para encenderlo. Ponga los audfonos en modo pareado activo. Presione el botn de pareado en el transmisor hasta que el indicador LED parpadee de forma alternada entre rojo y azul. Aproximadamente 5 segundos. Nota: El transmisor entrar automticamente en modo pareado activo para el pareado inicial. El transmisor se conectar automticamente a la seal Bluetooth ms potente. Una vez completado el pareado Bluetooth, el indicador LED se iluminar de color azul continuo. Nota: No intente conectar varios dispositivos Bluetooth al mismo tiempo. Nombre del modelo: Transmisor Bluetooth BTT55L Tensin de entrada: 12 voltios de CC Corriente de entrada: 1 A Respuesta de frecuencia: de 10Hz a 20kHz Potencia de entrada mxima: 60mW Peso: 28g Versin Bluetooth 5.0 Compatible con: A2DP v1.3, AVRCP v1.6 Rango de frecuencias del transmisor Bluetooth:
de 2402 a 2480MHz Potencia del transmisor Bluetooth: <4dBm Modulacin del transmisor Bluetooth:
GFSK, /4 DQPSK, 8DPSK Tecnologa de modulacin: BDR/EDR Velocidad de transferencia: EDR mxima de hasta 3Mbps Cantidad de canales: BT: 79 (0~78 canales) Tipo de antena: PCB Guia do usurio Transmissor Bluetooth BTT55L Boto de emparelhamento Indicador de LED Funo Limpar memria Mantenha o boto de emparelhamento pressionado por mais de 10 segundos para limpar a memria de emparelhamento e colocar o transmissor no modo de emparelhamento ativo. O indicador de LED piscar alternadamente nas cores vermelha e azul. Observao: depois de limpar a memria, o transmissor no sair do modo de emparelhamento ativo at que um fone de ouvido esteja emparelhado. Indicador de LED Status da conexo Vermelho constante Sem conexo Bluetooth Azul constante Vermelho e azul piscando alternadamente Fones de ouvido conectados Modo de emparelhamento ativo LED apagado Transmissor desligado APERU DU PRODUIT Guide de lutilisateur metteur Bluetooth BTT55L Bouton dappariement Voyant DEL Fonction Effacer la mmoire Maintenez le bouton dappariement enfonc pendant plus de 10 secondes pour effacer la mmoire dappariement et mettre lmetteur en mode dappariement actif. Le voyant DEL clignotera alternativement en rouge et en bleu. Remarque : Aprs avoir effac la mmoire, lmetteur restera en mode dappariement actif jusqu ce que des couteurs soient apparis. Voyant DEL tat de la connexion Rouge fixe Pas de connexion Bluetooth Bleu fixe couteurs connects Clignotant alternativement en rouge et en bleu Mode de jumelage actif Voyant DEL teint metteur teint Bluetooth BTT55L
<10,
. Bluetooth Jumelage avec des couteurs Bluetooth Appuyez sur le bouton dappariement de lmetteur pour le mettre sous tension Mettez les couteurs en mode dappariement actif Appuyez sur le bouton dappariement de lmetteur jusqu ce que le voyant DEL clignote alternativement en rouge et en bleu. Environ 5 secondes Remarque : Lmetteur entrera automatiquement en mode dappariement actif pour le jumelage initial. Lmetteur se connectera automatiquement au signal Bluetooth le plus puissant Une fois le jumelage Bluetooth termin, le voyant DEL saffichera en bleu fixe Remarque : Nessayez pas de connecter plusieurs appareils Bluetooth en mme temps. Nom du modle : metteur Bluetooth BTT55L Tension dentre : 12 VCC Courant dentre : 1 A Rponse de frquence : 10 Hz 20 kHz Puissance dentre max. : 60 mW Poids : 28 g Version Bluetooth 5.0 Prend en charge : A2DP v1.3, aptX Plage de frquence de lmetteur Bluetooth :
24022480MHz Puissance de lmetteur Bluetooth : < 4 dBm Modulation de lmetteur Bluetooth : GFSK,
/4 DQPSK, 8DPSK Technologie de modulation : BDR/EDR Taux de transfert : EDR maximale jusqu 3 Mbits/s Nombre de canaux : BT : 79 (0~78 CH) Type dantenne : Carte de circuits imprims
. Bluetooth .
Bluetooth BTT55L
: 12 .
: 1
: 1020
: 60
: 28 Bluetooth: 5.0
: A2DP v1.3, aptX Bluetooth:
24022480 Bluetooth: <4 Bluetooth: GFSK,
/4 DQPSK, 8DPSK
: BDR/EDR
: . EDR 3 /
: BT: 79 (0~78CH)
Bluetooth
, Bluetooth SIG, Inc.;
HARMAN International Industries, Incorporated
: Harman BTT55L FCC: 2AHPN-BE2863 IC: 6434C-BE2863 15
(FCC)
() RSS.
(1)
(2)
. B ICES-003. CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 ZMB/ZICTA/ TA /2021/5/6 10 LED LED LED 1 CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 Bluetooth Bluetooth SIG, Inc. International Industries, HARMAN Incorporated
(2)
(1) B ICES-003
/4 Harman BTT55L 2AHPN-BE2863 6434C-BE2863 FCC ID IC ID FCC 15 BTT55L 12VDC 1A 10Hz -20kHz 60mW 28 DQPSK 5.0 A2DP v1.3
<4dBm GFSK aptX 8DPSK BDR/EDR EDR 3Mbps 79 (0~78CH) BT PCB 2402 2480MHz ZMB/ZICTA/ TA /2021/5/6
. 8
. 1
. BTT55L LED LED LED 5 1 BTT55L LED
. LED
. 5
. LED
>10 LED LED LED BTT55L 12VDC 1A 10Hz 20kHz 60mW aptX
<4dBm GFSK 8DPSK BDR/EDR EDR 79 0~78CH 3Mbps 28g 5.0 Bluetooth 2402 2480MHz Bluetooth Bluetooth
/4 DQPSK A2DP v1.3 BT PCB Bluetooth Inc Industries, Incorporated HARMAN International Bluetooth SIG, Harman BTT55L 2AHPN-BE2863 6434C-BE2863 FCC ID IC ID FCC 15
(1) RSS
(2) B ICES-003 ZMB/ZICTA/ TA /2021/5/6 CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643 10
. LED
. LED LED
: BTT55L
: 12VDC
: 1A
: 10Hz~20kHz
: 60mW
: 28g
: A2DP v1.3, aptX 2402 ~ 2480MHz 5.0
/4 DQPSK, 8DPSK
: <4dBm
: GFSK,
: BDR/EDR 3Mbps
: BT: 79(0~78CH) EDR
: PCB Bluetooth Inc. International Incorporated Bluetooth SIG, HARMAN
, Industries,
: Harman BTT55L FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 FCC
. 15 Industry RSS Canada
(1)
(2)
. B
, ZMB/ZICTA/ TA /2021/5/6 ICES-003 CMIIT ID: 2021DJ8149 NCA APPROVED: 7E5-7M-XA7-RDR T/4/11/11/2643
1 | External Photos | External Photos | 500.08 KiB | April 14 2022 / October 11 2022 | delayed release |
1 | Product Label | ID Label/Location Info | 135.43 KiB | April 14 2022 |
HARMAN Becker Automotive Systems, Inc. Harman Model: BTTSSL FCC ID: 2AHPN-BE2863 IC ID: 6434C-BE2863 Made in China Ex
& [R] x0-0000x 10 R-06 0145 Le eee Sage ae RT IR
=) sheesu-en oLLODLSAM st Li bf al br er ul Tr Or 6 8 iG Q ilaladalaolatalitalstilstlatilitilctbstlatlitaatalitibah ihuliiitiitlatilithit sein Malt dithihthibibwbhblidtthihibnlnlnls
1 | Permanent Confidentiality Request | Cover Letter(s) | 90.89 KiB | April 14 2022 |
HARMAN 30001 Cabot Drive Novi, MI 48377 USA
+1.248.785.2361
+1.248.994.2703 To:
Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Bureau Veritas Consumer Products Services Inc. One Distribution Center Circle, #1 Littleton, MA 02702 Re:
Confidentiality Request Gentlemen:
24-March-2022 This letter is to comply with 47 CFR 0.457(d)(2) and 0.459 pertaining to confidential material. Harman International Industries, Incorporated, requests that the following documents regarding this submission for FCC ID: 2AHPN-BE2863 be kept confidential:
1. Block Diagram 2. Schematics 3. Circuit/Technical/Operational Description 4. Parts List/Bill of Materials The material above contains technical data, which would customarily be guarded from competitors. Sincerely, Mark Bowman Regulatory Compliance Engineer 24-March-2022
1 | Short-Term Confidentiality Request | Cover Letter(s) | 107.33 KiB | April 14 2022 |
24-November-2021 HARMAN 30001 Cabot Drive Novi, MI 48377 USA
+1.248.785.2361
+1.248.994.2703 To:
Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Bureau Veritas Consumer Products Services Inc. One Distribution Center Circle, #1 Littleton, MA 02702 Re:
Short Term Confidentiality Request Gentlemen:
1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual Sincerely, Mark Bowman Regulatory Compliance Engineer 24-November-2021 Pursuant to Public Notice DA 04-1705, Harman International Industries, Incorporated, requests SHORT-
TERM CONFIDENTIALITY for the following information until 180 days after the grant date of equipment authorization in order to ensure sensitive business information remains confidential until marketing of the device. FCC IDs: 2AHPN-BE2863
1 | Test Setup Photos (Conducted) | Test Setup Photos | 759.24 KiB | April 14 2022 / October 11 2022 | delayed release |
1 | Test Setup Photos (Radiated) | Test Setup Photos | 1.08 MiB | April 14 2022 / October 11 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-04-14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-04-14
|
||||
1 | Applicant's complete, legal business name |
Harman International Industries, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0026894154
|
||||
1 | Physical Address |
30001 Cabot Drive
|
||||
1 |
Novi, MI
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@bureauveritas.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AHPN
|
||||
1 | Equipment Product Code |
BE2863
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J******** R****
|
||||
1 | Telephone Number |
12488********
|
||||
1 | Fax Number |
12488********
|
||||
1 |
J******@harman.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/11/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Automotive Bluetooth Radio Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. RF exposure compliance is addressed under Sections 1.1310(d)(2) and 2.1091(c), as described in this filing. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
||||
1 | Name |
J**** K******
|
||||
1 | Telephone Number |
949-2********
|
||||
1 |
j******@bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0070100 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC