FCC ID: 2AHPN-BE2837 Automotive Infotainment Unit with Bluetooth/WLAN

Model: GEN3.1 BASE VA GEN3.1 BASE+ VA GEN3.1 MID VA GEN3.1 HIGH VA INTRODUCTION INTRODUCTION INTRODUCTION The symbols described below are found in this instruction manual as well as on the unit itself to insure its proper and safe usage and to prevent injury or damage to property. Make sure you understand the meaning of these symbols before reading the rest of this manual. READ FIRST We recommend that you wait until the positioning stabilizes before starting to drive. If you start to drive while the positioning is not complete, the indicated position may differ from the actual vehicle position. The screens shown in this manual may differ from the actual screens depending on the data type or when the map data was created. When maps are created, land surveys are conducted and information on road improvements and reopening is collected to provide the most accurate information possible. However, modifications to roads, place names and facilities may be carried out at any time. Consequently, we cannot guarantee that map data contains no errors in road positions, configuration and names, or in facility names. 4 Information in this manual that must be observed for the unit, and information that is useful to know is indicated as follows. WARNING l This sign indicates a situation in which incorrect handling through disregard of written information might result in death or serious personal injury. CAUTION l This sign indicates a situation in which incorrect handling through disregard of written information might result in personal injury or damage to property. INTRODUCTION SYMBOLS USED IN ILLUSTRATIONS Safety symbol The symbol of a circle with a slash through it means Do not, Do not do this or Do not let this happen. Arrows indicating operations I N T R O D U C T O N I Indicates the action

(selecting, turning, etc.) used to operate switches and other devices. NOTE l Useful information for the user is described. l Be sure to read all materials such as manuals and warranties that come with the product. SUBARU CORPORATION is not responsible for problems that arise due to failure to follow these instructions. l Changes to product specifications may result in differences between the content of the manual and the features of the unit. 5 l The driver should not change discs while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. l The driver should not perform operations such as adding a location or setting the memory while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. l To ensure safety, never operate a cell phone while driving. l Do not let foreign objects enter the disc slot. Doing so may result in a fire or electric shock. l Do not disassemble or modify the unit. Doing so may result in an accident, fire or electric shock. l Do not let water or foreign objects enter the internal parts of the unit. Doing so may result in smoke, fire or an electric shock. l Do not use the unit when it is malfunctioning, such as when the screen is not lit or no sound comes out. Doing so may result in an accident, fire or electric shock. INTRODUCTION PRECAUTIONS FOR USE WARNING l The main unit requires a 12 V DC power supply. The main unit should not be installed in any vehicle which does not have a 12 V power system with a ground-connected negative side. An installation other than the one intended may cause severe damage to the main unit, and electric shock or serious injury to the users. l Even when using the route guidance of the navigation system, be sure to drive by following the actual traffic regulations. If you drive by following only the route guidance of the navigation system, you may violate the actual traffic regulations and cause a traffic accident. l To ensure safety, the driver should not operate the navigation system while driving. Operating the navigation system while driving may result in an accidental steering wheel operation or otherwise cause an accident. Stop the vehicle before operating the navigation system. Also, do not watch the screen while driving because doing so may be dangerous

(ETC). Inattention to road conditions ahead may result in an accident. l The driver should not perform operations such as volume adjustment while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. 6 l Always replace fuses with fuses of the same specified capacity (amperage). Using a fuse with a higher capacity than the specification may result in a fire. l If a foreign object or water enters the unit, smoke or a strange odor may be emitted. If such an abnormality occurs, stop using the unit immediately and contact your SUBARU dealer. An accident, fire or electric shock may result if you continue to use the unit under these conditions. l In a thunderstorm, do not touch the antenna line or the unit. Lightning may cause an electric shock. l Do not park or stop in prohibited areas to use the unit. l If direct sunlight shines into the vehicle, light may reflect off the product. Be very careful while driving. l Never use headphones or earphones while driving. Driving while not being able to hear sounds from outside the vehicle may result in a traffic accident. CAUTION l Although the unit can be used when the ignition switch is set to either ACC or ON position, to protect the battery, start the engine before using the unit. l Do not use the unit anywhere other than in a vehicle. Doing so may result in an electric shock or other injury. INTRODUCTION l While driving, keep the volume low enough for you to hear outside sounds. Driving while not being able to hear sounds from outside the vehicle may result in an accident. l Be careful of the volume when turning on the power. If a loud noise is emitted suddenly when you turn on the power, it may damage your hearing. l Do not apply a strong force to the display. Doing so may result in a malfunction. l Do not put your fingers or hands into the disc slot. Doing so may result in an injury. I N T R O D U C T O N I l Do not touch the hot parts of the unit. The hot parts may burn you. l Do not use while there is an abnormality such as sound breakup or distortion. Doing so may result in a fire. l Using the unit during extremely high or low temperature may result in mistaken operation or a malfunction. In particular, the temperature inside the vehicle can often rise to a high level during the summer. Cool the vehicle, for example by opening a window, before using the unit. l Be careful if metal or water enters the unit, or the unit is exposed to a strong impact, because it may result in a malfunction. l The touch buttons on the display screen may not operate correctly if condensation forms inside them. If this happens, do not attempt to operate the switches until the condensation has disappeared. 7 INTRODUCTION l If juice or similar liquid is spilled on the display, wipe off immediately. Failure to do so may result in product malfunction. l The screen is easily marked by fingerprints and tends to attracts dust, and should therefore be cleaned occasionally. When cleaning, turn off the power, and wipe lightly with a soft, dry cloth. To remove dirt, soak a soft cloth in neutral detergent and squeeze well before wiping. Do not use a wet floor-cloth, organic solvents (benzene, ethanol, thinner, etc.), acids, or alkalis. Using such agents will result in screen deterioration. Furthermore, do not hit the screen or rub it with hard objects. NOTE l SUBARU CORPORATION is not responsible for any damages to the purchaser or third parties that occur from using the map data. l We do not provide any replacements or refunds for any mistakes there may be in the map data displays or contents, such as misspelling, omissions or misaligned positions. l SUBARU CORPORATION makes no guarantee the functions included in the map data will be appropriate for the specific objectives of the purchaser. l Functions that cannot be operated while driving have their colors toned down when the vehicle is being driven, and their operation is disabled. Touching a disabled switch may result in the display of an operation prohibited message on the screen. that NOTE l During strong vibrations, such as when driving on a poor road surface, the unit may no longer be able to read the data from the disc, and it will not operate correctly. When the vibration lessens, normal operation will return after a short time. l Immediately after turning on the heater when the temperature is low, dew (water drops) may adhere to the lens of the CD reader (condensation). If this happens, leaving the unit for about an hour should remove the condensation and return the unit to normal operation. If the unit does not return to normal operation even after several hours, contact your SUBARU dealer. l When using the unit for the first time after purchase, or after the battery was removed for a long time, the current position may not be displayed correctly. Wait a short time until the GPS positioning corrects the displayed position. l This device is precision-engineered equipment and the recorded data can be lost as a result of static electricity, electrical noise, vibration, or other influences. To protect the device against data loss, we recommend keeping a separate record of the data that you record after purchase. l The screen may be adversely affected or disturbed by noise if electrical equipment that generates powerful electrical noise is used near the system. In such cases, keep the electrical equipment at a distance, or refrain from use. 8 NOTE l The display may appear brighter when the temperature is low, or immediately after starting the engine, however, this is a characteristic of the LED elements, and does not indicate a fault. The display will return to its original brightness when the vehicle cabin has warmed up. l When you look at the screen through polarized material such as polarized sunglasses, the screen may be dark and hard to see. If so, look at the screen from different angles, adjust the screen settings on the general settings screen or take off your sunglasses. l It may be difficult to view the screen if the display is exposed to sunlight from an awkward angle. l The LCD screen may not function normally if covered with a protective film. Do not affix a protective film. l The touch panel may function incorrectly or fail to respond if operated with objects other than fingers (nails, operation when wearing gloves, pens, etc.) l When inserting or removing CDs, take care not to touch the touch panel. The touch panel will respond if inadvertently touched by hand. l If the system functions unexpectedly such as an area other than the one touched being selected, or failure to respond when touched, there is a possibility that another finger or part of the hand is in contact with display. l Scratches on the system panel surface are easily noticeable, and it should therefore be handled with care. INTRODUCTION SAFETY INSTRUCTION (7-inch system/6.5-

inch system only) I N T R O D U C T O N I To use this system in the safest possible manner, follow all the safety tips shown below. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. 9 INTRODUCTION WARNING l For safety, the driver should not operate the system while he/

she is driving. Insufficient attention to the road and traffic may cause an accident. SAFETY INSTRUCTION (7-inch with Navi system only) To use this system in the safest possible manner, follow all the safety tips shown below. This system is intended to assist in reaching the destination and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of your passengers. 10 Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done. WARNING l For safety, the driver should not operate the system while he/

she is driving. Insufficient attention to the road and traffic may cause an accident. l While driving, be sure to obey the traffic regulations and maintain awareness of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated information such as the direction of a one way street. While driving, listen to the voice instructions as much as possible and glance at the screen briefly and only when it is safe. However, do not totally rely on voice guidance. Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or non-voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instructions from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the drivers personal judgement. Use this system only in locations where it is legal to do so. Some states/provinces may have laws prohibiting the use of video and navigation screens next to the driver. INTRODUCTION I N T R O D U C T O N I 11 INTRODUCTION HOW TO READ THIS MANUAL No. Name Description Operational Outlines An outline of the operation is explained. Main Operations The steps of an operation are explained. Supplemental information Describes supplemental information relating to main operation. When a panel button should be selected, button names are shown as When a touch button on the screen should be selected, button names are shown as

. 12 Quick Guide System Types Main Product Features Basic Function Overview Buttons Home Screen Phone (Phone) Screen Map (Map) Screen Radio (Radio) Screen Media (Media) Screen Apps (Apps) Screen Settings (Settings) Screen Steering Wheel Controls Steering Wheel Controls 14 18 20 20 21 22 24 26 27 28 30 32 32 Quick Guide 13 SYSTEM TYPES SYSTEM TYPES This manual describes the following three operation methods. Note that all of the descriptions in the manual are based on the 7-inch with Navigation system. 6.5-inch system 7-inch system 6.5-inch touch screen Display audio system 7-inch touch screen Display audio system 7-inch with Navi system 7-inch touch screen Display audio with Navigation system 14 i Q u c k G u d e i 6.5-inch system Features:

- 6.5-inch touch screen

-

button button 6.5-inch touch screen MAIN FUNCTIONS Function Pairing (Bluetooth 3.0) Apps Apple CarPlay Android Auto AM/FM radio HD Radio receiver SiriusXM satellite radio Media operation Phone Voice recognition system Steering wheel controls Rear view camera SYSTEM TYPES Page 22 28 109 111 26 124 128 CD:137 USB:139 iPod:141 Bluetooth audio:144 AUX:147 22 195 32 44 15 1 SYSTEM TYPES 7-inch system Features:

- 7-inch touch screen

-

button MAIN FUNCTIONS Function Pairing (Bluetooth 3.0) Apps Apple CarPlay Android Auto AM/FM radio HD Radio receiver SiriusXM satellite radio Media operation Phone Voice recognition system button 7-inch touch screen NFC Steering wheel controls Rear view camera 16 Page 22 28 111 113 26 126 130 CD:139 USB:141 iPod:143 Bluetooth audio:146 AUX:149 22 197 56 32 44 i Q u c k G u d e i 7-inch with Navi system

- 7-inch touch screen

-

button Features:

MAIN FUNCTIONS Function Pairing (Bluetooth 3.0) Navigation system Apps Apple CarPlay Android Auto AM/FM radio HD Radio receiver SiriusXM satellite radio Media operation Phone button 7-inch touch screen Voice recognition system NFC Steering wheel controls Rear view camera SYSTEM TYPES Page 22 24 28 111 113 26 126 130 CD:139 USB:141 iPod:143 Bluetooth audio:146 AUX:149 22 197 56 32 44 17 1 MAIN PRODUCT FEATURES MAIN PRODUCT FEATURES Adoption of intuitive and easy-to-use smartphone-like graphical user interface STANDARDIZED OPERATION SCREEN LAYOUT FOR ALL FUNCTIONS Operation buttons, etc. Mode switching buttons, etc. Mode switching buttons on the left and operation buttons on the right and at the bottom prevents users becoming lost in operation no matter which functions are used. USE OF POP-UP SCREENS Close pop-up screen to return to original screen Pop-up screens are used instead of screen switching, preventing users from losing the current screen. 18 i Q u c k G u d e i Easy-to-view map screen display*

Maps appear wider by minimizing constantly displayed buttons. P.163 Customized home screen layout Frequently used functions and operations can be added to the home screen. P.42 MAIN PRODUCT FEATURES Example: For calling specific phone numbers, listening to specific radio stations, etc. Button positions can be changed freely. Touch screen to display automatically hidden buttons. Rough destination search function*

Start a search with a variety of words such as addresses, facility names, intersection names, or latitude/longitude. P.173 System and Bluetooth phone / device pairing Functions such as hands-free and applications can be used by connecting the system with Bluetooth phones /

devices wirelessly. P.22 Displays search prediction Search results are predicted and candidates displayed even if only partial words are known Searches can even be performed with multiple keywords.

*: 7-inch with Navi system only Apple CarPlay / Android Auto Support for Apple CarPlay and Android Auto allows access to functions such as maps, phone calls, and music. P.111 P.113 19 1 BASIC FUNCTION BASIC FUNCTION OVERVIEW BUTTONS TOUCH SCREEN Operations are performed by touching the touch screen directly with your finger. P.36 Insert a disc into this slot. The CD player turns on immediately. P.35 Press to eject a disc. P.35 Drag Pinch*1 Turn the knob to adjust the volume. Press the knob to turn the volume mute on/off. Press and hold to turn the audio system on/off. Select button to seek up or down for a radio station or to access a desired track/file. Select and hold button to continuously seek for a radio station, or to fast forward/rewind files or tracks. 20 P.124,130 Radio CD USB Bluetooth audio P.146 P.139 P.141 iPod P.143 Displays the home screen Shortcut to each screen Radio Map *1 P.24 Apps P.26 Phone *2 P.22 P.28 Audio operation screen:

Turn the knob to select a radio station or skip to the next or previous track/file. Press and hold the knob to display the sound settings screen. P.71 List display screen:

Turn the knob to move the cursor. Press the knob to select the item selected with the cursor.

*1: 7-inch with Navi system only

*2: 7-inch system/6.5-inch system only i Q u c k G u d e i HOME SCREEN Phone (Phone) SCREEN Map (Map) SCREEN

(7-inch with Navi system only) Settings (Settings) SCREEN BASIC FUNCTION P.22 P.24 P.30 Frequently used functions and operations can be added to the home screen. P.42 Button positions can be changed freely. By connecting an iPhone or Android device to the USB port, a CarPlay or Android Auto icon will display on the home screen. P.43 Apps (Apps) SCREEN Media (Media) SCREEN Radio (Radio) SCREEN P.28 P.27 P.26 21 1

BASIC FUNCTION Phone (Phone) SCREEN Call or send a text message to a registered favorite P.84,92 Call or send a text message to a recent contact P.84,92 Call or send a text message to a contact in the phonebook on the Bluetooth connected phone P.85,92 Check or reply to messages/place calls from received message list P.91,93 Directly input a number to place a call P.85

- Operation Flow: Pairing the System with a Bluetooth Phone/Device -

Display the Phone

(Phone) screen. Operate the Bluetooth phone/device. Register the Bluetooth phone/

device. Prepare the Bluetooth phone/

device to be paired. 22 Turn the Bluetooth phone/device Bluetooth function ON and select Subaru BT. Hold NFC* compatible devices near the audio system.

*: 7-inch with Navi system/7-inch system only If unable to pair, check whether your Bluetooth phone/device is compati-

ble with the system.

- Operation Flow: Placing Calls/Sending Messages from the Phonebook -

Select call recipient from phonebook. Select number for making call/sending message. If unable to select the button, the setting for downloading the phone-

book for the Bluetooth phone may be OFF. P.60 Send message Select message. Send message. In-call screen is displayed. i Q u c k G u d e i BASIC FUNCTION Place call Transfer call to Bluetooth phone Switch to call with other party End call Mute the connected smartphones voice Hold call Start three-way call In-call screen display and operation may differ, or may not be possible depending on the Bluetooth phone used. 23 1 Current vehicle position

(facing direction of travel) Menu button P.162 BASIC FUNCTION Map (Map) SCREEN (7-inch with Navi system only) CURRENT POSITION MAP Zoom in Scale indicator Zoom out Traffic information on/off Voice guidance on/off Search for nearby gas stations Speed limit Touch screen to display automatically hidden buttons. P.163 Current street Touch the current street name to display details of the current location, allowing that location to be registered. ROUTE GUIDANCE SCREEN Next street name The orientation of the map can be changed between 2D north-up, 2D heading-up and 3D. P.165 2D North-up screen 2D Heading-up screen 3D screen 24 Guidance route Current position Distance to the next turn and an arrow indicating the turning direction Remaining time/remaining distance/estimated arrival time Destination search Route guidance P.172 P.180 i Q u c k G u d e i

- Operation Flow: Route Guidance -

Display the destination search menu. Search for your destination. Select your destination. BASIC FUNCTION Destinations can also be set directly from the Map screen. P.173 Also search by POIs or previously set destinations. P.174,175 Start a search with a variety of words such as addresses, facility names, or latitude/

longitude, etc. Predicted search results will automatically appear as you type. Destinations matching the search words are displayed in a list. Select the route. Route guidance starts. The travel route is displayed, and voice guidance starts. A search is performed and results displayed for the fastest, shortest, and most economic routes. P.178 The screen display automatically changes to display travel lanes at expressway junctions, etc. P.181 JUNCTION SCREEN RETURNING HOME If you register an address as Home, it can be quickly set as a destination. Register an address as Home Setting Home as the destination P.31 P.172 25 1 BASIC FUNCTION Radio (Radio) SCREEN PAUSE AND PLAYBACK LIVE RADIO Select to scan for receivable stations/channels. Change radio mode Preset stations/channels

- Operation Flow: Presetting a Radio Station -

Select to turn HD Radio mode on/off (AM/FM). P.126 Previous Next Pause/play Current program Radio programs can be temporarily saved and played back later. P.128 Select the radio band. Select the radio station. Register the radio station. Scan OR Mix preset function Multiple stations can be registered as presets. ( AM, FM or SiriusXM Satellite Radio) P.125,134 A valid subscription to SiriusXM Satellite Radio is required to receive satellite radio service. 26 Select and hold one of the screen buttons. Select to seek for a station/channel. i Q u c k G u d e i BASIC FUNCTION SUPPORTED MEDIA P.155 CD USB/iPod Bluetooth audio P.158 P.53 Media (Media) SCREEN Playback tracks and programs, etc. in a variety of playback modes Change media source Random playback on/off Change tracks Select and hold to fast rewind Change to other Bluetooth audio device/register new device Repeat/do not repeat track currently playing Pause/play Change tracks Select and hold to fast forward

- Operation Flow: Using Playback Modes -

Display the playback mode list. Select the playback mode. Play a track. Depending on the audio source, several items from these categories are displayed in a list. Play the selected track. Play all tracks from the selected category. 27 1 BASIC FUNCTION Apps (Apps) SCREEN List of usable applications Pandora*

ahaTM Pandora is free personalized radio that offers effortless and endless music enjoyment and discovery. P.108

*: Pandora is only available in certain countries. Please visit pandora.com/legal for more information. SUBARU STARLINK The SUBARU STARLINK function allows the system to link with a smartphone. P.99 28 ABOUT USING APPLICATIONS In order to use an application on this system, the corresponding application must be installed on your smartphone. P.96 Apple CarPlay does not require an application to be installed. ahaTM is a cloud-based applica-

tion that connects to the system and gives you access to your favorite web content safely and easily. P.104 i Q u c k G u d e i Apple CarPlay Android Auto CarPlay can be used to view iPhone maps, play music, and place calls by connecting your iPhone to the system. Supported applications can also be run. P.111 BASIC FUNCTION Android Auto can be used to view Android maps, play music, and place calls by connecting your Android device to the system. Supported applications can also be run. P.113 SiriusXM Travel Link SiriusXM Travel Link is a service provided by SiriusXM Satellite Radio, and can be used to view information on fuel information, sports, stocks, and weather. Fuel information Sports Stocks Weather P.115 7-inch with Navi system: Weather information can be viewed by linking with the navigation function. Current weather information for your destination can be viewed at the route calcula-

tion screen. P.178 Weather information broadcast by weather stations en route to your destination can be viewed during route guidance. P.186 Weather information SiriusXM Travel Link subscription is required. 29 1 BASIC FUNCTION Settings (Settings) SCREEN Navigation*

P.187 General P.62 L L O R C S Phone P.55 Sound P.71 L L O R C S L L O R C S 30

*: 7-inch with Navi system only i Q u c k G u d e i BASIC FUNCTION Add a new profile.

- Operation Flow: Create a driver profile -

CREATE A DRIVER PROFILE Create a driver profile and register your cellular phone, address, etc. You can store and call registered information at any time. Registering a Bluetooth phone Pair the system and Bluetooth phone. P.22 Enter a name. Register your home/office.*

Register wallpaper.

*: 7-inch with Navi system only Search for and register your home/office address. Procedure complete. 31 1 STEERING WHEEL CONTROLS STEERING WHEEL CONTROLS STEERING WHEEL CONTROLS Some parts of the audio system can be controlled using the steering wheel controls. P.149 RADIO Press: Preset station/channel up/down Press and hold: Seek up/down continuously MEDIA Press: Change a track/file Press and hold: Fast forward/rewind Press: Volume up/down Press and hold: Volume up/down continuously Press the switch to change audio modes. Press the switch to mute the audio volume on/off. Press: Start the voice recognition system Press and hold: Start Siri*

*: If connected to iPhone P.192 P.195 32 Press the switch to receive/end a call without taking your hands off the steering wheel. P.78 33 MEMO 2. Select I Agree (I Agree). BASIC INFORMATION BEFORE OPERATION BASIC INFORMATION BEFORE OPERATION INITIAL SCREEN INITIAL SCREEN WARNING l When the vehicle is stopped with the engine running, always apply the parking brake for safety. 1. When the ignition switch is in the ACC or ON position, the initial screen will be displayed and the system will begin operating. After a few seconds, the CAUTION (CAUTION) screen will be displayed. 34 BASIC INFORMATION BEFORE OPERATION UNLOADING A DISC 1. Press and remove the disc. NOTE l Discs can be unloaded even when the ignition switch is turned off. LOADING AND UNLOADING A DISC LOADING A DISC CAUTION l Never try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot. 1. Insert a disc into the disc slot. After insertion, the disc is automatically loaded. NOTE l Compatible Disc: P.72 l When inserting a disc, gently insert the disc with the label facing up. 35 BASIC FUNCTION2 BASIC INFORMATION BEFORE OPERATION CONNECTING AND DISCONNECTING A USB MEMORY DEVICE/PORTABLE DEVICE CONNECTING A DEVICE 1. Connect a device. AUX USB Turn on the power of the device if it is not turned on. NOTE l Compatible USB memory device: P.75 l Compatible iPod: P.75 l This unit does not support commercially available USB hubs. l By connecting a device such as a cellular phone, charging starts depending on the device. 36 TOUCH SCREEN GESTURES Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use Touch Quickly touch and release once. Double Touch with one finger*1 Quickly touch and release twice with one finger. Double Touch with two fingers*1 Quickly touch and release twice with two fingers. Changing and selecting various settings Enlarging the scale of the map screen Reducing the scale of the map screen BASIC INFORMATION BEFORE OPERATION NOTE l Swipe operations may not be performed smoothly in high altitudes. Operation method Outline Main use Scrolling the lists Scrolling the map screen*1 Scrolling the lists Scrolling the map screen*1 Changing the scale of the map screen Drag*2 Touch the screen with your finger, and move the screen to the desired position. Swipe*2 Quickly move the screen by swiping with your finger. Pinch*1 Move your two fingers further apart (pinch-

out) to zoom in the map. Move your two fingers closer together

(pinch-in) to zoom out the map.

*1: 7-inch with Navi system only

*2: The above operations may not be performed on all screens. 37 BASIC FUNCTION2 NOTE l When a pop-up screen. is displayed on the screen, select to close BASIC INFORMATION BEFORE OPERATION TOUCH SCREEN OPERATION This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.) When a screen button is touched, a beep sounds. The beep sound can be turned on/off. (P.71) CAUTION l To prevent damaging the screen, lightly touch the screen buttons with your finger. l Do not use objects other than your finger to touch the screen. l Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen. NOTE l If the system does not respond to touching a screen button, move your finger away from the screen and then touch it again. l Dimmed screen buttons cannot be operated. l The displayed image may become darker and moving images may be slightly distorted when the screen is cold. l In extremely cold conditions, the map may not be displayed and the data input by a user may be deleted. Also, the screen buttons may be harder than usual to depress. 38 ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION ENTERING LETTERS AND NUMBERS When searching by an address, name, etc., or entering data, letters and numbers can be entered via the screen. BASIC INFORMATION BEFORE OPERATION No. Information/Function Input field The input field contains text to assist the user in completing tasks. The position of the cursor can be moved by selecting the desired location in the input field. Select to clear the input field. Displays candidate items based on the input letters. The desired item can be selected. Select to erase one character. Select to enter the item. Select to change keyboard types. Select to enter symbols. Select to enter characters in lower case or in upper case. NOTE l The appearance of the keyboard may change or the input method may be limited depending on the circumstances where the software keyboard is displayed. 39 BASIC FUNCTION2 BASIC INFORMATION BEFORE OPERATION LIST SCREEN OPERATION The list screen can be scrolled by a swipe gesture. For details on the operation: P. 36 The list screen can also be scrolled by the TUNE/

SCROLL knob and pressing the knob will enter it. No. Information/Function Some lists contain character screen buttons which allow users to jump directly to list entries that begin with the same letter as the character screen button. Every time the same character screen button is selected, the list starting with the subsequent character is displayed. No. Information/Function Select to skip to the next or previous page. This indicates the displayed screens position. Faster scrolling is possible by dragging the position indicator. 40

SCREEN ADJUSTMENT ADJUSTING BRIGHTNESS The brightness of the screen can be adjusted. (P.62) CHANGING BETWEEN DAY AND NIGHT MODE Depending on the ambient brightness and/or position of the headlight switch, the screen changes to day or night mode. NOTE l 7-inch with Navi system only: Regardless of the position of the headlight switch, the screen mode of map screen can be changed. (P.174) BASIC INFORMATION BEFORE OPERATION STATUS DISPLAY The status of the Bluetooth connection, etc. is displayed on the screen. No. Name Conditions Screen hierarchy CD indicator Displays the screen context. This icon is displayed when a disc has been inserted. The level of Wi-Fi reception

*

When Wi-Fi function is off, no item is displayed. 41 BASIC FUNCTION2 BASIC INFORMATION BEFORE OPERATION No. Name Conditions HOME SCREEN OPERATION The Bluetooth connection indicator Remaining battery charge This icon is displayed when the Bluetooth connection is established. ADDING SHORTCUT ICONS TO THE HOME SCREEN Low Full The amount displayed does not always correspond with the amount displayed on the Bluetooth device. Shortcut icons for various functions can be added to the home screen when the home screen shortcut function is turned on. (P.62) 1. Select

. 2. Select

(Add Shortcut). Reception level Active audio source Poor Excellent The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have. Select to display the active audio source information, radio frequency, and name of the artist and track currently playing, etc.

*: 7-inch with Navi system/7-inch system only 42 3. Select the desired function. 4. Select the desired shortcut function. Depending on the function, select other items and enter necessary information. 5. Check that the shortcut icon is displayed on the home screen. NOTE l The home screen has 3 pages, and shortcut icons can be added to each page. The page can be changed by swiping. BASIC INFORMATION BEFORE OPERATION MOVING AND DELETING SHORTCUT ICONS Users can rearrange the home screen buttons when the home screen shortcut function is turned on. (P.62) 1. Select and hold the shortcut icon. XWhen moving shortcut icons 2. Drag the button to the desired position. User can move buttons to another page by dragging them to the corresponding end of the screen if the number of buttons allows for multiple pages. XWhen deleting shortcut icons 2. Drag the button to the bottom of the screen. 43 BASIC FUNCTION2 Bluetooth SETTINGS REGISTERING A Bluetooth PHONE/

DEVICE FOR THE FIRST TIME logos are registered The Bluetooth word mark and trademarks owned by Bluetooth SIG, Inc. To use the hands-free system or the Bluetooth audio system, it is necessary to register a Bluetooth phone/device with the system. Once the Bluetooth phone/device has been registered, it is possible to use the hands-free system and the Bluetooth audio system. This operation cannot be performed while driving. For details on registering a Bluetooth phone/device:

P.48 44 1. Turn the Bluetooth connection setting of your Bluetooth phone/device on. This function is not available when the Bluetooth connection setting of your Bluetooth phone/device is set to off. 2. Display the phone screen (P.78) or the Bluetooth audio operation screen (P.63). 3. Select Yes (Yes) to register a Bluetooth phone/device. 4. Follow the steps PHONE/DEVICE

(P.48) in REGISTERING A Bluetooth from STEP 3

. to STEP 7 Bluetooth SETTINGS PROFILES This system supports the following services. Bluetooth Device Spec. Function Requirements Recommendations Bluetooth Phone/Device Bluetooth Specification Registering a Bluetooth phone/device Ver. 1.1 Ver. 3.0 +EDR Bluetooth Device Profile Function Requirements Recommendations Bluetooth Phone HFP (Hands-Free Profile) Hands-free system PBAP (Phone Book Access Profile) MAP (Message Access Profile) PAN (Personal Area Networking Profile) DUN (Dial-Up Network Profile) Transferring the contacts Bluetooth phone message APPS function APPS function SPP (Serial Port Profile) APPS function Ver. 1.0 Ver. 1.0

-

-

-

-

Ver. 1.6 Ver. 1.1.1 Ver. 1.0 PAN 1.0 DUN 1.1 Ver. 1.1 45 3Bluetooth SETTINGSSETTINGS3 Bluetooth Device Profile Function Requirements Recommendations Bluetooth Device A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) Bluetooth audio system Ver. 1.0 Ver. 1.0 Ver. 1.2 Ver. 1.4 NOTE l If your cellular phone does not support HFP, registering the Bluetooth phone or using PBAP, MAP or SPP profiles individually will not be l If the connected Bluetooth phone/device version is older than recommended or incompatible, the Bluetooth phone/device function may not possible. work properly. 46 Bluetooth SETTINGS Bluetooth SETTINGS 1. Select

. XWhen setting the Bluetooth phone/device 4. Select the desired Bluetooth phone/device. 5. Select the item to be set. 2. Select Settings (Settings). 3. Select Phone (Phone). XWhen registering a Bluetooth phone/device 4. Select

(Add Device). For details on registering a Bluetooth phone/device:

P.48 No. Function Page Connecting or disconnecting Bluetooth phones/devices Deleting Bluetooth phones/devices Setting phonebook download Setting the automatic connection priority 49 51 52 52 NOTE l The phone settings screen can also be displayed by selecting

(Change Device) on the phone overview

(P.78) or Bluetooth audio operation screen screen

(P.63). 47 3Bluetooth SETTINGSSETTINGS3 REGISTERING A Bluetooth PHONE/DEVICE Up to 5 Bluetooth phones/devices can be registered. Bluetooth compatible phones (HFP) and devices (AVP) can be registered simultaneously. This operation cannot be performed while driving. 1. Display the phone settings screen. (P.47) 2. Select

(Add Device). If a message appears, follow the guidance on the screen. 48 3. When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth phone/device. Cancel (Cancel): Select to cancel the registration. For details on operating the Bluetooth phone/device, see the manual that comes with it. 4. Register using your Bluetooth phone/device. compatible Bluetooth A PIN-code is not required for SSP (Secure Simple Pairing) phones/devices. Depending on the type of Bluetooth phone/device being connected, a message confirming registration may be displayed on the Bluetooth phones/devices screen. Respond and operate the Bluetooth phone/

device according to the confirmation message. 7-inch with Navi system/7-inch system only:

Registration of NFC compatible devices is completed when they are held near the audio system. Bluetooth SETTINGS 5. Select

(Confirm). 7. Check that the following pop-up screen is displayed when the connection is complete. Cancel (Cancel): Select to cancel the registration. that the following pop-up screen may be 6. Check displayed. Cancel (Cancel): Select to cancel the registration. If a confirmation message appears asking whether to transfer the phones contact data to the system, select the appropriate button. If an error message appears, follow the guidance on the screen to try again. CONNECTING OR DISCONNECTING Bluetooth PHONE/DEVICE Up to 5 Bluetooth phones/devices (Phones (HFP) and devices (AVP)) can be registered. If more than 1 Bluetooth phone/device has been registered, select which Bluetooth phone/device to connect to. 1. Display the phone settings screen. (P.47) 49 3Bluetooth SETTINGSSETTINGS3 2. Select the Bluetooth phone/device to be connected or disconnected. 4. Check that Connected (Connected) is displayed next to the Bluetooth phone/device when the connection is complete. If an error message appears, follow the guidance on the screen to try again. Connected (Connected) is displayed next to the currently connected Bluetooth phone/device. If the desired Bluetooth phone/device is not on the

(Add Device) to register the list, select Bluetooth phone/device. (P.48)

(Connect) or 3. Select

(Disconnect). NOTE l It may take time if the Bluetooth phone/device connection is carried out during Bluetooth audio playback. l Depending on type of Bluetooth phone/device being connected, it may be necessary to perform additional steps on the Bluetooth phone/device. the AUTO CONNECTION MODE Leave the Bluetooth phone/device in a location where the connection can be established. When the ignition switch is in the ACC or ON position, the system searches for a nearby registered Bluetooth phone/device. The system will connect with the registered Bluetooth phone/device that was last connected, if it is nearby. 50 Bluetooth SETTINGS CONNECTING MANUALLY When the auto connection has failed, it is necessary to connect Bluetooth phones/devices manually. 1. Select 2. Select Phone (Phone). 3. Follow steps CONNECTING OR DISCONNECTING Bluetooth PHONE/DEVICE from STEP 2. (P.49)

, and then select Settings (Settings). the in RECONNECTING THE Bluetooth PHONE/DEVICE If a Bluetooth phone/device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the ACC or ON position, the system automatically reconnect the Bluetooth phone/device. If a Bluetooth phone/device is disconnected on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone/device manually. DELETING Bluetooth PHONES/DEVICES 1. Display the phone settings screen. (P.47) 2. Select the desired Bluetooth phone/device. 3. Select Delete (Delete). 4. Select Delete (Delete) when the confirmation message appears. 51 3Bluetooth SETTINGSSETTINGS3 SETTING PHONEBOOK DOWNLOAD When this function is activated, the phonebook data of the connected phone will be downloaded automatically. 1. Display the phone settings screen. (P.47) 2. Select the Bluetooth phone to be set. SETTING THE AUTOMATIC CONNECTION PRIORITY The automatic connection priority of the registered Bluetooth phones/devices can be changed. 1. Display the phone settings screen. (P.47) 2. Select the Bluetooth phone/device to be set. 3. Select Download) on/off. to turn Phonebook Download (Phonebook 3. Select

(Reorder). NOTE l The profile version of the connected Bluetooth phone may not be compatible with transferring phonebook data. For details, contact your SUBARU dealer. 52 Bluetooth SETTINGS 4. Select next to the desired Bluetooth phone/device, and then drag it to the desired position. 53 3Bluetooth SETTINGSSETTINGS3 OTHER SETTINGS SETTING Wi-Fi CONNECTION (7-inch with Navi system/7-inch system only) 4. Select

(Disconnect).

(Connect) or CONNECTING OR DISCONNECTING A Wi-Fi NETWORK 1. Display the general settings screen. (P.62) 2. Select 3. Select the desired network.

(Wi-Fi Settings).

(Forget This Network): Select to delete the item. 5. Check that a confirmation message appears when the connection is complete. If an error message appears, follow the guidance on the screen to try again.

(Add New Network): Select to add a Wi-Fi network (P.55) When a network with password entry screen password, and then select is selected and the the is displayed, enter

(Join). 54 ADDING A Wi-Fi NETWORK Available networks which are not displayed by searching can be added. 1. Display the general settings screen. (P.62) 2. Select 3. Select 4. Enter the network name, and then select 5. Select the security type.

(Add New Network).

(Wi-Fi Settings).

(Join). OTHER SETTINGS WARNING l Use Wi-Fi devices only when safe and legal to do so. l This system is fitted with Wi-Fi antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Wi-Fi antennas. The radio waves may affect the operation of such devices. therapy-pacemakers l Before using Wi-Fi devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. or 6. Enter the password, and then select 7. Check that a confirmation message appears when the

(Join). connection is complete. NOTE l Communication standards:

802.11b 802.11g 802.11n (2.4GHz/5GHz*) 802.11a*

802.11ac*

*: Depending on the country, this specification may not be available. l Security:

WPATM WPA2TM l WPA and WPA2 are registered mark of the Wi-Fi Alliance. 55 SETTINGS3 MEDIA OPERATION MEDIA OPERATION CD OVERVIEW The CD operation screen can be accessed with the following methods:

Insert a disc. (P.35) Select on the Media (Media) screen. (P.79) XControl panel No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Press to eject a disc. Disc slot Turn to change a track. Press and hold to display the sound settings screen.

(P.72) Select to change a track. Select and hold to fast forward/rewind. 56 XControl screen MEDIA OPERATION No. Function Select to enable/disable repeat playback of the track currently playing. Select to change a track. Select and hold to fast forward/rewind. Select to pause/play. Select to enable/disable random playback for the tracks currently playing on the CD.

*: 7-inch with Navi system/7-inch system only No.

*

Function Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen. Select

(Search OO) to narrow down the search for tracks in each play mode. Shows progress. The playback location can be changed by dragging the sliders. NOTE l If a disc contains CD-DA files and MP3/WMA/AAC files, only the CD-DA files can be played back. l If a CD-TEXT disc is inserted, the title of the disc and track will l Depending on the disc or music file being played, the cover art be displayed. may not be displayed. 57 AUDIO6 MEDIA OPERATION USB MEMORY Audio files on the USB memory device can be played back. XControl panel OVERVIEW The USB Audio playback screen can be accessed with the following methods:

Connect a USB memory device. (P.36) Select on the Media (Media) screen. (P.79) No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Turn to change a track. Press and hold to display the sound settings screen.

(P.72) Select to change a track. Select and hold to fast forward/rewind. 58 XControl screen No. Function MEDIA OPERATION Shows progress. The playback location can be changed by dragging the sliders. Select to enable/disable repeat playback of the track currently playing. Select to change a track. Select and hold to fast forward/rewind. Select to pause/play. Select to enable/disable random playback for the tracks currently playing from the USB memory device.

*: 7-inch with Navi system/7-inch system only WARNING No.

*

Function l Do not operate the players controls or connect the USB memory device while driving. Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen. Select

(Search OO) to narrow down the search for tracks in each play mode. CAUTION l Do not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. l Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. l Do not insert foreign objects into the port as this may damage the portable player or its terminal. 59 AUDIO6 MEDIA OPERATION NOTE l Depending on the device or music file being played, the cover art may not be displayed. iPod When an iPod is connected, you can play iPod music files. On this unit, you can perform operations such as selecting a file from a list or changing to the random playback mode. At devices which support Apple CarPlay, turn Apple CarPlay off in the device side Restrictions settings. OVERVIEW The iPod operation screen can be accessed with the following methods:

Connect an iPod. (P.36) Select on the Media (Media) screen. (P.79) 60 XControl panel XControl screen MEDIA OPERATION No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Turn to change a track. Press and hold to display the sound settings screen.

(P.72) Select to change a track. Select and hold to fast forward/rewind. No.

*1 Function Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen. Select

(Search OO) to narrow down the search for tracks in each play mode. Shows progress. The playback location can be changed by dragging the sliders. 61 AUDIO6 MEDIA OPERATION No. Function CAUTION l Do not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. l Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. l Do not insert foreign objects into the port as this may damage the portable player or its terminal. NOTE l When an iPod is connected using a genuine iPod cable, the iPod starts charging its battery. l If playing iPod music, perform operation at the system. Certain functions may not be available if played directly from the iPod. Furthermore, depending on the connected iPod, certain functions may not be available. l Depending on the iPod or music file being played, the cover art may not be displayed. l When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume playing from the same point it was last used. l Tracks selected by operating a connected iPod may not be recognized or displayed properly. Select to enable/disable repeat playback of the track currently playing. Select to change a track. Select and hold to fast forward/rewind. Select to pause/play. Select to enable/disable random playback for the tracks currently playing on the iPod. Select to fast forward the current content item in fixed intervals. Select to rewind the current content item in fixed intervals.

*2

*2

*1: 7-inch with Navi system/7-inch system only

*2: Display when playing Audiobooks or Podcasts WARNING l Do not operate the players controls or connect the iPod while driving. 62 Bluetooth AUDIO The Bluetooth audio system enables users to play music files stored on Bluetooth devices through the vehicle speakers via wireless communication. This audio system supports Bluetooth, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth, the Bluetooth audio system will not function. OVERVIEW on the Media (Media) screen. (P.79) The Bluetooth audio operation screen can be accessed by selecting Depending on the type of portable player connected, some functions may not be available and/or the screen may look differently than shown in this manual. XControl panel MEDIA OPERATION No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. Turn to change a track. Press and hold to display the sound settings screen.

(P.72) Select to change a track. Select and hold to fast forward/rewind. 63 AUDIO6 No. Function Shows progress. The playback location can be changed by dragging the sliders. Select to enable/disable repeat playback of the track currently playing. Select to change a track. Select and hold to fast forward/rewind. Select to pause/play. Select to enable/disable random playback for the tracks currently playing on the Bluetooth device.

*: 7-inch with Navi system/7-inch system only MEDIA OPERATION XControl screen Function Select to switch between other media sources. Displays cover art. Select to display the play mode selection screen. Select

(Search OO) to narrow down the search for tracks in each play mode. Select to display the Change Device (Change Device) screen. (P.66) No.

*

64 WARNING l Do not operate the players controls or connect to the Bluetooth audio system while driving. l This system is fitted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth antennas. The radio waves may affect the operation of such devices. l Before using Bluetooth devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. CAUTION l Do not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. MEDIA OPERATION NOTE l Depending on the Bluetooth device that is connected to the system, the music may start playing when selecting while it is paused. Conversely, the music may pause when selecting while it is playing. l In the following conditions, the system may not function:

The Bluetooth device is turned off. The Bluetooth device is not connected. The Bluetooth device has a low battery. l It may take time to connect the phone when Bluetooth audio is l For operating the portable player, see the instruction manual that being played. comes with it. l If the Bluetooth device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the ACC or ON position, the system will automatically reconnect to the portable player. l If the Bluetooth device is disconnected on purpose, such as it was turned off, this does not happen. Reconnect the portable player manually. l Bluetooth device information is registered when the Bluetooth device is connected to the Bluetooth audio system. When selling or disposing of the vehicle, remove the Bluetooth audio information from the system. (P.62) l Depending on the Bluetooth device or music file being played, the cover art may not be displayed. l If the Bluetooth device does not play automatically when connected, device operation may be necessary. 65 AUDIO6 MEDIA OPERATION CONNECTING A Bluetooth DEVICE To use the Bluetooth audio system, it is necessary to register a Bluetooth device with the system. XRegistering an additional device 1. Select

(Change Device) on the Bluetooth audio control screen. 2. For more information: P.48 XSelecting a registered device 1. Select Bluetooth audio control screen. 2. Select the Bluetooth device to be connected.

(Change Device) on XControl panel the AUX OVERVIEW The AUX operation screen can be accessed with the following methods:

Connect a portable audio device. (P.36) Select on the Media (Media) screen. (P.79) No. Function Turn to adjust volume. Press to mute the audio system. Press and hold to turn the audio system on/off. 66 No. Function WARNING Press and hold to display the sound settings screen.

(P.72) l Do not operate the players controls or connect the portable audio device while driving. MEDIA OPERATION XControl screen CAUTION l Do not leave portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player. l Do not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal. l Do not insert foreign objects into the port as this may damage the portable audio device or its terminal. No. Function Select to switch between other media sources. 67 AUDIO6 AUDIO REMOTE CONTROLS AUDIO REMOTE CONTROLS STEERING WHEEL CONTROLS Some parts of the audio system can be controlled using the steering wheel controls. No. Switch

/

/

switch switch Source switch Mute switch 68 X

/

switch Mode Operation Function Volume Press Volume up/down Press and hold Volume up/down continuously X

/

switch Mode Operation Function AM/FM Radio, SiriusXM Press Preset channel up/down Press and hold Seek up/down continuously aha Audio CD, MP3/WMA/

AAC disc, USB, iPod, Bluetooth audio Press Press Content up/down Change a track Press and hold Fast forward/rewind Pandora*

Press Track up (

only)

*: Pandora is only available in certain countries. Please visit pandora.com/

legal for more information. XSource switch Mode Operation Function All Press Change audio modes XMute switch Mode Operation Function All Press Mute/unmute NOTE l In the aha, Pandora* and SUBARU STARLINK mode, some operation may be done on the screen depend on the selected APPS.

*: Pandora is only available in certain countries. Please visit pandora.com/

legal for more information. AUDIO REMOTE CONTROLS 69 AUDIO6 TIPS FOR OPERATING THE AUDIO SYSTEM TIPS FOR OPERATING THE AUDIO SYSTEM OPERATING INFORMATION CAUTION l To avoid damage to the audio system:

Be careful not to spill beverages over the audio system. Do not put anything other than an appropriate disc into the disc slot. NOTE l The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO Usually, a problem with radio reception does not mean there is a problem with the radio it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or phone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther the vehicle is from a station, the weaker its signal will be. In addition, reception conditions change constantly as the vehicle moves. Here, some common reception problems that probably do not indicate a problem with the radio are described. 70 FM Fading and drifting stations: Generally, the effective range of FM is about 25 miles (40 km). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter. They are often accompanied by distortion. Multi-path: FM signals are reflective, making it possible for 2 signals to reach the vehicles antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception. Static and fluttering: These occur when signals are blocked by buildings, trees or other large objects. Increasing the bass level may reduce static and fluttering. Station swapping: If the FM signal being listened to is interrupted or weakened, and there is another strong station nearby on the FM band, the radio may tune in the second station until the original signal can be picked up again. TIPS FOR OPERATING THE AUDIO SYSTEM reflected by AM Fading: AM broadcasts are the upper atmosphere especially at night. These reflected signals can interfere with those received directly from the radio station, causing the radio station to sound alternately strong and weak. Station interference: When a reflected signal and a signal received directly from a radio station are very nearly the same frequency, they can interfere with each other, making it difficult to hear the broadcast. Static: AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening or electrical motors. This results in static. SiriusXM Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of SiriusXM Satellite Radio. Alternation or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment. 71 AUDIO6 TIPS FOR OPERATING THE AUDIO SYSTEM CD PLAYER AND DISC Extremely high temperatures can keep the CD player from working. On hot days, use the air conditioning system to cool the inside of the vehicle before using the player. Bumpy roads or other vibrations may make the CD player skip. If moisture gets into the CD player, the discs may not be able to be played. Remove the discs from the player and wait until it dries. WARNING l CD players use an invisible laser beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player correctly. Use only discs marked as shown above. The following products may not be playable on your player:

SACD dts CD Copy-protected CD Video CD XSpecial shaped discs XTransparent/translucent discs Audio CDs 72 XLow quality discs XLabeled discs TIPS FOR OPERATING THE AUDIO SYSTEM CAUTION l Do not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player, or it may be impossible to eject the disc. l This system is not designed for use of Dual Discs. Do not use Dual Discs because they may cause damage to the player. l Do not use discs with a protection ring. The use of such discs may damage the player, or it may be impossible to eject the disc. l Do not use printable discs. The use of such discs may damage the player, or it may be impossible to eject the disc. Correct Wrong Handle discs carefully, especially when inserting them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side. 73 AUDIO6 TIPS FOR OPERATING THE AUDIO SYSTEM Dirt, scratches, warping, pin holes or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) Remove discs from the players when not in use. Store them in their plastic cases away from moisture, heat and direct sunlight. To clean a disc: Wipe it with a soft, lint-free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint-free cloth. Do not use a conventional record cleaner or anti-static device. 74 CD-R/RW DISCS CD-R/CD-RW discs that have not been subject to the finalizing process (a process that allows discs to be played on a conventional CD player) cannot be played. It may not be possible to play CD-R/CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of the unit. It may not be possible to play discs recorded on a personal computer depending on the application settings and the correct format. (For details, contact the appropriate application manufacturers of the applications.) the environment. Record with CD-R/CD-RW discs may be damaged by direct exposure to sunlight, high temperatures or other storage conditions. The unit may be unable to play some damaged discs. If you insert a CD-RW disc into the player, playback will begin more slowly than with a conventional CD or CD-R disc. Recordings on CD-R/CD-RW cannot be played using the DDCD (Double Density CD) system. USB MEMORY DEVICE USB communication formats: USB 2.0 HS (480 Mbps) and FS (12 Mbps) File formats: FAT 16/32 Correspondence class: Mass storage class iPod following The iPhone devices can be used with Made for iPod nano, iPod, iPod touch and this system. iPod touch (5th generation) iPod nano (7th generation) iPhone 4s iPhone 5 iPhone 5s iPhone 6 iPhone 6s iPhone 6 Plus iPhone 6s Plus iPhone SE Depending on differences between models or software versions etc., some models might be incompatible with this system. iPod video is not supported. TIPS FOR OPERATING THE AUDIO SYSTEM For USA customers, please visit www.subaru.com for details. Outside of the USA customers, contact your local dealer to arrange a demonstration in order to confirm whether or not the phone can be paired with the vehicle. FILE INFORMATION Description Channels Codec MPEG-4 AAC LC MPEG-4 HE AAC MPEG-4 HE AAC v2 MP3 WMA2/7/8/

9/9.1/9.2 PCMWAVE 8-48 kHz sampling rate 8-320 kbps CBR, VBR 16-48 kHz sampling rate 8-320 kbps CBR, VBR 16-48 kHz sampling rate 8-320 kbps CBR, VBR 8-48 kHz sampling rate 8-320 kbps CBR, VBR 16-48 kHz sampling rate 8-320 kbps CBR, VBR 8 bit and 16bit 8000,16000,and 44100Hz sampling frequency Container/

Extension

.3gp, .m4a,

.aac, .mp4 Mono and stereo Mono and stereo

.3gp, .m4a,

.aac, .mp4 Mono and stereo

.3gp, .m4a,

.aac, .mp4 Mono, Stereo, and Joint

.mp3 Mono and stereo

.wma, .asf Mono and stereo

.wav 75 AUDIO6 TIPS FOR OPERATING THE AUDIO SYSTEM The player is compatible with VBR (Variable Bit Rate). MP3 (MPEG Audio Layer 3), WMA (Windows Media Audio) and AAC (Advanced Audio Coding) are audio compression standards. This system can play AAC/AAC+ v2/MP3/WMA files on CD-R, CD-RW discs, USB memory device, and Bluetooth device. This system can play disc recordings compatible with ISO 9660 level 1 and level 2 and with the Romeo and Joliet file system. When naming an AAC/AAC+ v2/MP3/WMA file, add an appropriate file extension (.mp3/.wma/.m4a). This system plays back files with .mp3/.wma/.m4a file extensions as AAC/AAC+ v2/MP3/WMA files respectively. To prevent noise and playback errors, use the appropriate file extension. This system can play only the first session when using multi-session compatible CDs. MP3 files are compatible with the ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 and Ver. 2.3 formats. This system cannot display disc title, track title and artist name in other formats. WMA/AAC files can contain a WMA/AAC tag that is used in the same way as an ID3 tag. WMA/AAC tags carry information such as track title and artist name. This system can play back AAC files encoded by iTunes. The sound quality of MP3/WMA files generally improves with higher bit rates. In order to achieve a reasonable level of sound quality, discs recorded with a bit rate of at least 128 kbps are recommended. The MP3/WMA player does not play back MP3/

WMA files from discs recorded using packet write data transfer (UDF format). Discs should be recorded using pre-mastering software rather than packet-

write software. m3u playlists are not compatible with the audio device. MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio device. When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if the fast forward or rewind operations are used. It is not possible to check folders that do not include AAC/AAC+ v2/MP3/WMA files. 76 AAC/AAC+ v2/MP3/WMA files in folders up to 3 levels deep can be played. However, the start of playback may be delayed when using discs containing numerous levels of folders. For this reason, we recommend creating discs with no more than 2 levels of folders. TIPS FOR OPERATING THE AUDIO SYSTEM 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.mp3 005.wma Folder 3 006.m4a The play order of the compact disc with the structure shown above is as follows:

001.mp3 002.wma . 006.m4a The order changes depending on the personal computer and AAC/AAC+ v2/MP3/WMA encoding software you use. 77 AUDIO6 END USER LICENSE AGREEMENT END USER LICENSE AGREEMENT 78 END USER LICENSE AGREEMENT 79 APPENDIX/WHAT TO DO IF/INDEX9 CERTIFICATION CERTIFICATION CERTIFICATION SiriusXM Satellite Radio 2016 Sirius XM Radio Inc. Sirius, XM, SiriusXM and all related marks and logos are trademarks of Sirius XM Radio Inc. All other marks, channel names and logos are the property of their respective owners. All rights reserved. SiriusXM DATA SERVICE Neither SiriusXM nor Subaru is responsible for any errors or inaccuracies in the SiriusXM data services or its use in vehicle. 80 RADIO WAVE COMMUNICATIONS XU.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including that may cause undesired operation. interference WARNING l FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. l CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body in normal use position. l Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. XCanada This device complies with Industry Canadas licence-

exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage;

(2) lutilisateur de lappareil doit accepter tout brouillage radio le brouillage est susceptible den compromettre le fonctionnement. lectrique subi, mme si CERTIFICATION WARNING l CAUTION: Radio Frequency Radiation Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body (excluding extremities: hands, wrists, feet and ankles). ATTENTION: lexposition aux rayonnements radiofrquence

- Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20cm ou plus entre le dispositif rayonnant et le corps ( lexception des extrmits: mains, poignets, pieds et chevilles). 81 APPENDIX/WHAT TO DO IF/INDEX9 CERTIFICATION XMxico Gracenote (7-inch with Navi system/7-inch system only) Gracenote, Gracenote the Powered by Gracenote logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. logotype, and logo and Music and recognition technology and related data are provided by Gracenote. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. 82