PRELIMINARY BATTERY-POWERED PORTABLE PA SYSTEM WITH BLUETOOTH AUDIO STREAMING AND CONTROL EON ONE Compact USERS GUIDE FCC ID: APIEONONECOM Contents Section 1: Important Safety Instructions 2 Care & Cleaning 3 Section 2: Precautions 4 Section 3: EON ONE Compact System Declaration of Conformity 5 Section 4: Introduction to the EON ONE Compact System 6 Getting Started 6 PA Basics 7 Getting Acquainted with the EON ONE Compact Powered Mixer 7 Audio Inputs 8 Switching Modes & Editing Channel Parameters 8 Phantom Power Disclaimer 9 Bluetooth Input 10 Audio Outputs 11 USB Power Ports 11 Replacing the Battery 12 Section 6: Accessories 13 Backpack 13 Mounting Pole 13 Section 7: System Specifications 14 Section 8: Cables & Connectors 15 Section 9: Contact Information 16 Section 10: Warranty Information 17 1 Section 1: Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug A polarized plug has two blades with one wider than the other A grounding-type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped Service Instruction in Owners Manual: CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE WARNING: DO NOT EXPOSE BATTERIES OR BATTERY PACK TO EXCESSIVE HEAT, SUCH AS THAT FROM OPEN FLAMES, DIRECT SUNSHINE, ETC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE 19 20 21 22 23 Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable Protective earthing terminal The apparatus should be connected to a mains socket outlet with a protective earthing connection Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources To return your used device, please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environmental safe recycling 24 25 No naked flame sources, such as lighted candles, should be placed on the apparatus. For adequate ventilation, do not install this equipment in a confined or enclosed space, such as a book case or similar unit Product ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etcetera 2 CARE & CLEANING EON ONE Compact systems may be cleaned with a dry cloth Do not get moisture into any of the openings in the system Ensure that the system is unplugged from the AC outlet before cleaning THIS APPARATUS CONTAINS POTENTIALLY LETHAL VOLTAGES TO PREVENT ELECTRIC SHOCK OR HAZARD, DO NOT REMOVE CHASSIS, MIXER MODULE, OR AC INPUT COVERS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 3 Section 2: Precautions
!
The EON ONE Compact system covered by this manual is not intended for use in high moisture environments Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts Avoid exposing the speakers to direct moisture Keep speakers out of extended or intense direct sunlight The driver suspension will prematurely dry out and finished surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light. The EON ONE Compact system can generate considerable energy When placed on a slippery surface such as polished wood or linoleum, the speaker may move due to its acoustical energy output Precautions should be taken to assure that the speaker does not fall off a stage or table on which it is placed Hearing Damage, Prolonged Exposure To Excessive SPL The EON ONE Compact system is capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production crew, and audience members Caution should be taken to avoid prolonged exposure to SPL in excess of 90 dB WATCH FOR THESE SYMBOLS!
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated Dangerous Voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR 4 PlaceholderAwaiting verification Section 3: EON ONE Compact System Declaration of Conformity This equipment complies with the EMC directive 89/336/EEC Modified by 92/31/EEC 93/68/EEC 98/13/EEC and LVD 73/23/EEC modified by 93/68/EEC This product meets safety standards:
EN60065:2002 UL6500 7th Edition: 2003 UL 60065 - STANDARD FOR AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY EQUIREMENTS - Edition 7 - Revision Date 2007/12/11 CSA C222 NO 60065-03 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS SAFETY REQUIREMENTS - Edition 1 - Revision Date 2006/04/01 IEC 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS -- SAFETY REQUIREMENTS - Edition 71 - Issue Date 2005/12/01 And EMC Standards EN55103-1 (E2) EN55103-2 (E2) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment FCC Compliance Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications However there is no guarantee that the interference will not occur in a particular installation If this equipment does cause harmful interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to collect the interference by one or more of the following measures Increase the separation between the equipment and receiver Reorient or relocate the receiving antenna Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC RADIATION EXPOSURE STATEMENT This device complies with FCC radiation exposure limits set forth for an uncontrolled environment This device should be installed and operated with minimum distance 20cm between the radiator & your body 5 PlaceholderReplace w/EOC certificate Section 4: Introduction to the EON ONE Compact System Thank you for choosing the JBL EON ONE Compact The EON ONE Compact is a battery-powered, ultra-
portable, all-in-one PA system featuring rechargeable battery power, Bluetooth audio streaming and control, and a 4-channel mixer with individual tone controls, ducking, and reverb With an easy-to-carry, lightweight design and professional-grade audio quality, the EON ONE Compact provides a versatile PA system that is perfect for situations where ease and portability are just as important as sonic quality The following items are included in the EON ONE Compact package:
1 EON ONE Compact System 1 Power cable Quick Start Guide GETTING STARTED 1 Remove the EON ONE Compact system from the carton 2 Connect the power cord to the power receptacle to charge the unit The BATTERY LEVEL meter will illuminate in sequence from bottom to top, indicating the unit is charging The unit is charged when the BATTERY LEVEL meter is fully illuminated when powered on or off 3 Turn the MASTER VOLUME control all the way to the left before connecting any inputs 4 Connect your devices to the EON ONE Compact's input jacks. 5 Turn on the POWER switch The POWER switch and the POWER LED on the front of the speaker will illuminate 6 Select a channel using the CHANNEL SELECT button Note that the CHANNEL SELECT LEDs will light white when signal is detected 7 Set the channel's GAIN control to 12 oclock. 8 Slowly turn the MASTER VOLUME control to the right until the desired volume is reached 9 Adjust the TREBLE, BASS, and REVERB controls to taste for the selected channel 10 Using the CH SELECT button, select the next channel and adjust the GAIN, TREBLE, BASS, and REVERB controls as previously described Repeat for any remaining channels until the desired mix is achieved 11 To connect a device to Bluetooth for audio streaming, turn on Bluetooth on your source device 12 Press the Bluetooth button on the EON ONE Compact The LED will blink when the EON ONE Compact is in pairing mode 13 Find the JBL EON ONE Compact on your Bluetooth device and select it 14 To control the EON ONE Compact via Bluetooth, visit wwwjblprocom/eononecompact to download the app The app is also available in the iTunes store and Google Play store 15 To engage Mix Mode, hold down the CH SELECT button for 2 seconds All CH SELECT LEDs will light 16 Mix Mode is now engaged. The four rotary controls (1-4) now control the gain of each respective channel. 6 PA BASICS A mixing board is actually a very simple device that takes the audio input signals (from the input channels) and
"mixes" them to the outputs The mixing board controls will typically enable the user to blend the input channel signal levels, affect their tone, and adjust each channel's reverb level. The signal is then fed from the mixing board to the amplifiers and on to the speakers. The EON ONE Compact is a self-contained PA system, which includes a mixing board, amplifiers, and speakers. GETTING ACQUAINTED WITH THE EON ONE COMPACT POWERED MIXER The powered digital mixer section of the EON ONE Compact houses the mixing board and power amplifier. Here, all of the microphones, musical instruments, and external sound sources (such as MP3 players, CD players, or Bluetooth audio sources) can be connected. The PASS THRU output can be used to connect multiple EON ONE Compact loudspeakers together for increased sound output or monitoring Lets take a look at the audio input channels next 7 AUDIO INPUTS The EON ONE Compact has four inputs: two mono MIC/LINE inputs on XLR combo jacks, one dedicated 1/4"
HI-Z input for direct connection of an instrument (such as an acoustic guitar), and one 3.5mm AUX input, which is summed with the Bluetooth audio streaming input All of the inputs are routed to the speaker, HEADPHONE jack, and PASS THRU output jack If using a condenser microphone, MIC/LINE 1 must be used and phantom power must be enabled See
"Phantom Power Disclaimer" on page 9 for important information on using phantom power SWITCHING MODES & EDITING CHANNEL PARAMETERS The EON ONE Compact can operate in one of two different modes: CHANNEL MODE or MIX MODE The mode can be selected by pressing and holding the CH SELECT button for 2 seconds When in CHANNEL MODE, pressing the CH SELECT button will select the channel to edit, indicated by the CH1-CH4 LEDs Once a channel is selected, adjusting a parameter will affect the selected channel. In MIX MODE (CH1-CH4 LEDs lit) the four rotary controls (1-4) can be used to adjust each channel's gain respectively for quick adjustment of mix levels. CH SELECT button is used to select a channel for editing or to switch between modes MIC/LINE button selects between a microphone
(XLR) input or a line (1/4"
phone) input Combination 1/4" phone
(line) and XLR female (mic) input connectors DUCKING on/off button*
1/4" HI-Z phone jack for connecting an instrument 35mm AUX input for connecting a mobile device PASS THRU output for connecting additional JBL EON ONE Compact speakers 35mm HEADPHONE output MASTER VOLUME control adjusts the overall output level In CH MODE, adjusts the selected channel's gain;
in MIX MODE, adjusts the CH1 gain In CH MODE, adjusts the selected channel's high frequencies; in MIX MODE, adjusts the CH2 gain In CH MODE, adjusts the selected channel's low frequencies; in MIX MODE, adjusts the CH3 gain In CH MODE, adjusts the selected channel's reverb amount; in MIX MODE, adjusts the CH4 gain
*NOTE: When the DUCKING button is enabled, channels 1 and 2 provide the sidechain signal for the ducker, which will automatically attenuate the channel 4 (AUX and Bluetooth) signal levels whenever signal is present on either of the MIC inputs This feature is ideal for ducking playback music in presentation and instruction applications 8 PHANTOM POWER DISCLAIMER When using condenser microphones, phantom power is required to be present at the contacts of the microphone
(XLR) connector for the microphone to operate correctly. When phantom power is enabled in the EON ONE Compact, it is applied to the CH1 XLR MIC input only WARNING! To prevent damage to the EON ONE Compact or external devices when using a condenser microphone, always turn down all EON ONE Compact MASTER VOLUME controls and ensure the PHANTOM button is off before connecting the microphone Once the condenser microphone has been connected, enable the PHANTOM button, then raise the MASTER VOLUME controls to the desired levels When the PHANTOM button is enabled, +48V is applied to the CH1 XLR MIC input WARNING! Do not connect any unbalanced sources to the CH1 XLR MIC input when phantom power is enabled Doing so may damage the connected device due to the phantom power voltage on pins 2 and 3 of the XLR connector 9 BLUETOOTH INPUT The EON ONE Compact comes equipped with the ability to stream Bluetooth audio for music playback or backing tracks. To connect a Bluetooth device, first enable Bluetooth on your device. Press the BLUETOOTH button on the EON ONE Compact Select "EON ONE Compact" from the source device to complete the pairing The level of the Bluetooth device relative to other source channels can be controlled from the Bluetooth device Push the Bluetooth button to pair with a Bluetooth device 10 AUDIO OUTPUTS The EON ONE Compact provides a 1/4" PASS THRU output for connecting to additional EON ONE Compact loudspeakers. A 3.5mm (1/8") HEADPHONE output is also provided for additional monitoring options. PASS THRU output can be connected to the line input of another JBL EON ONE Compact to expand the system for monitoring or higher output capabilities USB POWER PORTS These ports can be used to charge a Bluetooth device or other portable music playback device during use One port provides 1A for low-amperage devices and the other provides 2A for USB devices requiring higher current USB power capability TBD 11 REPLACING THE BATTERY 1 Unscrew the single screw on the battery compartment cover 2 Pull the battery compartment cover off 3 Remove the battery 4 Replace with the same battery only 5 Place the battery compartment over the battery and reapply screw 12 Placeholder Section 6: Accessories BACKPACK The optional backpack is available for effortless transport of an EON ONE Compact system MOUNTING POLE The 'place JBL pole model here' is available for securely mounting an EON ONE Compact system Visit jblprocom or contact your local JBL Pro dealer for more information on JBL accessories 13 PlaceholderPlaceholder Section 7: System Specifications System System Type:
Battery-operated portable line array with powered mixer Maximum SPL Output:
118 dB peak system output (pink noise) Frequency Range (-10dB):
375Hz 185kHz Frequency Response (-3dB):
45Hz 18kHz AC input :
USB Power Port:
Battery Type:
Charge Time:
Run Time:
Amplifier Design:
System Power Rating:
Mixer Input Connectors:
Channels:
100 120 VAC, 50/60Hz; 220 240 VAC, 50/60Hz Supplies 500mA Extended-life lithium-ion 5 hours Up to 6 hours Class D 250W LF/HF 6 inputs (4 x mono mic/line, 1 x stereo) 1-4: XLR / 1/4" combo connectors (XLR = mic-level input, 1/4" = line-level input)
(Enabling the CH3+CH4 HI-Z button switches 1/4" inputs on channels 3-4 to accept high-
impedance signals from instruments.) 5-6: 35mm stereo jack or stereo RCA connectors Input Impedance:
Ch 1-4 combo XLR: 40 K Ohms balanced Ch 1-2 combo TRS: 40 K Ohms balanced Ch 3-4 combo TRS (CH3+CH4 HI-Z button disabled): 40 K Ohms balanced Ch 3-4 combo TRS (CH3+CH4 HI-Z button enabled): 40 K Ohms unbalanced Ch 5-6 RCA: 5 K Ohms unbalanced Ch 5-6 35mm: 10 K Ohms unbalanced 48V (CH1-4 XLR inputs) 2-channel Bluetooth audio input streaming (stereo signal is fed to the MONITOR OUT jacks while mono-summed signal is fed to the line array speakers) 3 outputs (1 x stereo RCA monitor output, 1 x mono pass thru output) RCA monitor outputs: 100 Ohms unbalanced XLR pass thru output: 37 Ohms balanced Phantom Power:
Bluetooth:
Output Connectors:
Output Impedance:
Signal Indicators:
Limit: Yellow LED indicates limiter active condition Speaker EQ:
System Limiter:
LF Driver:
HF Driver:
Coverage Pattern:
Enclosure:
Grille:
Dimensions (D x W x H) Unit Dimensions:
Packaged Dimensions:
Net Weight of System:
Individual channel Bass and Treble controls, center detent, +/-12 dB cut and boost On-board DSP limiting and tuning 1 x 8" (203.2mm) woofer 6 x 2" (50.8mm) drivers 80 x 60 (H x V) Polypropylene Powder-coated perforated steel 15.8" x 10.5" x 23.4" (401mm x 266mm x 594mm) 16.6" x 21.3" x 30.4" (421mm x 541mm x 772mm) 37.5 lbs (17.0 kg) 14 Placeholder Section 8: Cables & Connectors XLR/F to XLR/M microphone cable TRS (balanced) 1/4" phone to XLR/M cable TRS (unbalanced) 1/4" phone to XLR/M cable TS (unbalanced) 1/4" phone to XLR/M cable XLR/M to RCA (phono) cable The standard cable for interconnection of microphone and line-
level signals in professional audio systems Example: Microphone to mixer For connecting balanced devices with 1/4" phone; may be used interchangeably For connecting instruments with unbalanced outputs to balanced XLR inputs This cable is electrically identical to TRS (unbalanced) 1/4" phone and may be used interchangeably Connects consumer audio products and some DJ mixer outputs to professional audio equipment inputs TS (unbalanced) 1/4" phone to RCA (phono) cable Connects an unbalanced 1/4" output to an RCA input TRS 1/4" phone to dual 1/4" phone cable XLR/F to XLR/M audio ground lift adapter Splits a stereo output into separate left/right signals Also used for connecting signal processors to mixer insert jacks Used for breaking ground loops between interconnected devices works with balanced inputs and outputs only XLR/F to XLR/M Microphone Cable TRS (Balanced) 1/4" Phone to XLR/M Cable Tip Ring Sleeve TRS (Unbalanced) 1/4" Phone to XLR/M Cable Tip Ring Sleeve TS (Unbalanced) 1/4" Phone to XLR/M Cable Tip Sleeve XLR/M to RCA (Phono) Cable TS (Unbalanced) 1/4" Phone to RCA (Phono) Cable Tip Sleeve TRS 1/4" Phone to dual TS 1/4" Phone Cable Tip Ring Sleeve XLR/F to XLR/M Audio Ground Lift Adapter Sleeve Tip Sleeve Tip 1 2 3 Tip Ring Sleeve Tip Ring Sleeve Tip Sleeve 1 2 3 Tip Sleeve Tip Ring Sleeve 1 2 3 1 (shield) 2 3 1 (shield) 2 3 1 (shield) 2 3 1 (shield) 2 3 Tip Sleeve (shield) Tip Sleeve (shield) Tip Sleeve (shield) Tip Sleeve (shield) 1 (no connection) 2 3 15 Section 9: Contact Information Mailing Address:
JBL Professional 8500 Balboa Blvd Northridge, CA 91329 Shipping Address:
JBL Professional 8500 Balboa Blvd, Dock 15 Northridge, CA 91329
(Do not return product to this address without first obtaining prior authorization from JBL) Customer Service:
Monday through Friday 8:00am - 5:00pm Pacific Coast Time in the U.S.A.
(800) 8JBLPRO (800.852.5776) wwwjblproservicecom On The World Wide Web:
wwwjblprocom Professional Contacts, Outside the USA:
Contact the JBL Professional Distributor in your area A complete list of JBL Professional international distributors is provided at our USA website: wwwjblprocom Product Registration:
Register your product online at wwwjblprocom 16 Section 10: Warranty Information The JBL EON ONE Compact system is warranted for three years from the date of original purchase Who Is Protected By This Warranty?
Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warranty service is required What Does The JBL Warranty Cover?
Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered: Damage caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual;
damage resulting from the performance of repairs by someone not authorized by JBL; claims based upon any misrepresentations by the seller; any JBL product on which the serial number has been defaced, modified or removed Who Pays For What?
JBL will pay all labor and material expenses for all repairs covered by this warranty Please be sure to save the original shipping cartons because a charge will be made if replacement cartons are requested Payment of shipping charges is discussed in the next section of this warranty How To Obtain Warranty Performance If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818-893-8411). We may direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair Either way, youll need to present the original bill of sale to establish the date of purchase Please do not ship your JBL product to the factory without prior authorization If transportation of your JBL product presents any unusual difficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible for transporting your product for repair or arranging for its transportation and for payment of any initial shipping charges However, we will pay the return shipping charges if repairs are covered by the warranty Limitation of Implied Warranties ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY EXCLUSION OF CERTAIN DAMAGES JBLS LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE 17 EON ONE Compact User's Guide Rev A The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc and any use of such marks by HARMAN International Industries, Incorporated is under license Google Play is a trademark of Google LLC iTunes is a trademark of Apple Inc, registered in the US and other countries Other trademarks and trade names are those of their respective owners