FCC ID: APIN400NCTWS BLUETOOTH HEADSET

SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 1 4/8/2019 2:15:01 PM RSS standard(s). IC SAR Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head. FCC SDOC SUPPLIERS DECLARATION OF CONFORMITY HARMAN International hereby declares that this equipment is in compliance with the FCC Part 15 Subpart B. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.akg.com. 15. This apparatus is intended to be used only with the power supply and/or charging cable provided by the manufacturer. SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 2 4/8/2019 2:15:02 PM Exposure of humans to RF elds (RSS-102) The computers employ low gain integral antennas that do not emit RF eld in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas Web site at http://www.hc-sc.gc.ca/

The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/ RSS with the device transmitting at its highest certied power level in all tested frequency band without distance attaching away from the body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines. This product is in compliance with Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 31/03/2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. REACH REACH (Regulation No 1907/2006) addresses the production and use of chemical substances and their potential impacts on human health and the environment. Article 33(1) of REACH Regulation requires suppliers to inform the recipients if an article contains more than 0.1% (per weight per article) of any substance(s) on the Substances of Very High Concern (SVHC) Candidate List (REACH candidate list). This product contains the substance lead (CAS-No. 7439-92-1) in a concentration of more than 0.1% per weight. At the time of release of this product, except for the lead substance, no other substances of REACH candidate list are contained in a concentration of more than 0.1% per weight in this product. Note: On June 27, 2018, lead was added to the REACH candidate list. The inclusion of lead in the REACH candidate list does not mean that lead-containing materials pose an immediate risk or results in a restriction of permissibility of its use. EN 50332-1:2013 EN 50332-2:2013 14/02/2014 2013/56/EU 2013/56/EU 01/07/2015 AKG SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 3 4/8/2019 2:15:03 PM 2014/30/EU 2014/35/EU www.akg.com. www.akg.com. 2014/53/EU. SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 4 4/8/2019 2:15:03 PM Dclaration d'exposition aux rayonnements IC - SAR Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Lutilisateur final doit suivre les instructions spcifiques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif portatif est conu pour rpondre aux exigences dexposition aux ondes radio tablie par le dveloppement nergtique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve signale en vertu de cette norme lors de la certification de produit utiliser lorsquil est correctement port sur le Tte . 15. Cet appareil a t conu pour tre utilis uniquement avec le cble d'alimentation et/ou de charge fourni par le fabricant. SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 5 4/8/2019 2:15:04 PM Larticle 33(1) du rglement REACH impose aux fournisseurs dinformer les destinataires si un article contient plus de 0,1% (en masse par article) dune ou plusieurs substances mentionnes sur la liste des substances extrmement proccupantes (SVHC, Substances of Very High Concern) ( liste des candidates REACH ). Ce produit contient la substance plomb (N CAS 7439-92-1) une concentration suprieure 0,1 % en masse. Au moment de la production de ce produit, part la substance plomb, aucune autre substance de la liste des candidates REACH nest prsente une concentration suprieure 0,1 % en masse dans ce produit. Remarque: Le 27 juin 2018, le plomb a t ajout la liste des substances candidates REACH. Linclusion du plomb dans la liste des substances candidates REACH ne signifie pas que les matriaux contenant du plomb posent un risque immdiat et ne conduit pas une restriction dautorisation de leur utilisation. AKG. Conformit RoHS Ce produit est conforme aux directives 2011/65/UE et (UE) 2015/863 du Parlement europen et du Conseil du 31/03/2015 relatives la limitation de lutilisation de certaines substances dangereuses dans les quipements lectriques et lectroniques. REACH REACH (rglement N 1907/2006) concerne la production et lutilisation de substances chimiques ainsi que leurs impacts potentiels sur la sant humaine et lenvironnement. SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 6 4/8/2019 2:15:04 PM www.akg.com. www.akg.com. SSB1009_AKG_Splashproof_Safety_Sheet_Global_CR_V9.indd 7 4/8/2019 2:15:05 PM

From:

To:

Subject:

Date:

oetech@fcc.gov Shi, Joyce (Shenzhen)

[EXTERNAL] Response to Inquiry to FCC (Tracking Number 816905) 2019127 0:24:40

*** WARNING: this message is from an EXTERNAL SENDER. Please be cautious, particularly with links and attachments. ***

Inquiry on 12/05/2019 :

Inquiry:

Dear Sir/Madam This is Joyce from SGS Shenzhen Branch. The grant Harman International Industries, Inc. apply the new applicantion (FCC ID:APIN400NCTWS) now. This product is composed of Earbuds and power bank, the earphone is too small to print FCC ID, the applicant want to print the FCC ID in the bottom of the power bank to replcae. Please refer the attached. Could you accept this?

Look forward to recevie your reply. Besr Regards!

FCC response on 12/06/2019 If the device is unquestionably too small for the FCC ID to be readable (smaller than 4-6 points), the FCC ID may be placed in the user manual. However, the charging box requires its own FCCID or SDoC approval. Attachment Details:

Do not reply to this message. Please select the Reply to an Inquiry Response link from the OET Inquiry System to add any additional information pertaining to this inquiry.

Harman International Industries, Inc To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding:

Confidentiality Request regarding application for FCC ID: APIN400NCTWS LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Tim Song Title: Manager, Compliance Signature:

On behalf of Company: Harman International Industries, Inc Telephone: 818-895-8173 E-mail: tim.song@harman.com

Harman International Industries, Inc Date: 2019-12-30 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: APIN400NCTWS To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Harman International Industries, Inc This authorization is valid until further written notice from the applicant. Print Name: Tim Song Title: Manager, Compliance Signature:

On behalf of Company: Harman International Industries, Inc Telephone: 818-895-8173 E-mail: tim.song@harman.com