FCC ID: APIJBLBTRC Remote Control

L75ms Integrated Music System Quick Start Guide www.jbl.com/specialtyaudio Integrated Music System General Specications Type:

Low Frequency Drivers:

High Frequency Drivers:

Center Image Driver:

Amplier Power:

Sound Controls:

Wireless Inputs:

Wired Inputs:

Resolution:

Frequency Response:

Maximum SPL:

Subwoofer Output:

Enclosure:

Grille:

Dimensions with grille:

Remote Control Type:

Product Weight (Each):

Shipping Weight:

Shipping Units of Measure:

Warranty:

Streaming tabletop loudspeaker system 5.25" (133mm) Pure Pulp cone woofer

(25mm) Aluminum dome tweeter with waveguide

(100mm) Pure pulp cone midrange 1 4 125W RMS per woofer, 25W RMS per tweeter, 50W RMS for center (350W RMS total) Speaker placement compensation, selectable sound-eld expander HDMI ARC, ethernet, phono (MM), 3.5mm AUX WiFi streaming, Bluetooth 4.2 O P Up to 32-bit, 192 kHz 45 Hz - 25 kHz (-6 dB) 106 dB @ 1m 2V RMS with auto-sense/engage HPF Front-ported tabletop in satin walnut furniture-grade wood veneer Black foam Quadrex grille F BTLE 2402-2480MHz@0.16dBm 11 lbs. (5.0 kg) 30.4 lbs. (13.8 kg) Each 5 Years EN L52 CLASSIC Iconic 2-Way Bookshelf Loudspeaker Package Contents www.jblsynthesis.com 5.25" (133mm) Pure Pulp cone woofer (JW135PW-4) 2-way bookshelf loudspeaker 0.75" (20mm) Titanium dome tweeter (JT020TI1-4) with waveguide 10 - 75 WRMS 4 Ohm 85 dB/2.83V/1m 47 Hz - 24 kHz (-6 dB) Front-ported bookshelf in satin walnut furniture-grade 2.8 kHz Foam Quadrex grille available in three colors: black, wood veneer burnt orange and dark blue 13" H x 7.74" W x 8.51" D

(330.2 mm x 196.6 mm x 216.2 mm) HF level control Gold-plated binding posts 11 lbs. (5.0 kg) 30.4 lbs. (13.8 kg) Mirror-imaged stereo pair M6 x 1.0 thread, 12 mm max screw length / spaced 2.64"

5 Years 24" (609 mm)

(67 mm) center-to-center Type:

Specications Low Frequency Driver:

High Frequency Driver:

Recommended Amplier Power:

Impedance:

Loudspeaker Sensitivity:

Frequency Response:

Crossover Frequency:

Enclosure:

Grille:

Dimensions with grille:

Controls:

Input Type:

Product Weight (Each):

Shipping Weight:

Shipping Units of Measure:

Recommended stand height:

Warranty:

Wall bracket insert/spacing:

Basic Single-Wire Connection 2 x Loudspeakers 2 x Quadrex Grilles www.jblsynthesis.com Type:

L52 CLASSIC Iconic 2-Way Bookshelf Loudspeaker Specications Low Frequency Driver:

High Frequency Driver:

Recommended Amplier Power:

Loudspeaker Sensitivity:

Impedance:

Frequency Response:

Crossover Frequency:

Enclosure:

Dimensions with grille:

Grille:

Controls:

Product Weight (Each):

Input Type:

Shipping Units of Measure:

Shipping Weight:

Recommended stand height:

Warranty:

Wall bracket insert/spacing:

5.25" (133mm) Pure Pulp cone woofer (JW135PW-4) 0.75" (20mm) Titanium dome tweeter (JT020TI1-4) with 2-way bookshelf loudspeaker waveguide 10 - 75 WRMS Front-ported bookshelf in satin walnut furniture-grade 85 dB/2.83V/1m 4 Ohm 47 Hz - 24 kHz (-6 dB) Foam Quadrex grille available in three colors: black, 2.8 kHz wood veneer burnt orange and dark blue

(330.2 mm x 196.6 mm x 216.2 mm) 13" H x 7.74" W x 8.51" D Gold-plated binding posts HF level control 11 lbs. (5.0 kg) M6 x 1.0 thread, 12 mm max screw length / spaced 2.64"

30.4 lbs. (13.8 kg) Mirror-imaged stereo pair 5 Years 24" (609 mm)

(67 mm) center-to-center Basic Single-Wire Connection EN Package Contents 2 x Loudspeakers 2 x Quadrex Grilles Placement and Positioning

>50 cm

(20 in) 6-8 feet 1.8-2.4 m

-60 40

>50 cm

(20 in) Speaker Connector Panel QUICK START GUIDE Receiver or Amplier

(One Channel Shown) separately) Listening Position Note: The L52 Classic may be stand mounted with optional JBL metal stands (model JBL JS-65 sold Address: 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES EMEA Liaison Ofce, Danzigerkade 16, 1013 AP Amsterdam, The Netherlands European Representative: Harman International Industries, Incorporated Manufacturer: Harman International Industries, Incorporated Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, Harman International Industries, Limited, 1x Quick Start Guide HP3 9TD, United Kingdom Placement and Positioning

>50 cm

(20 in) 6-8 feet 1.8-2.4 m

-60 40

>50 cm

(20 in) Speaker Connector Panel QUICK START GUIDE Receiver or Amplier

(One Channel Shown) Listening Position Note: The L52 Classic may be stand mounted with optional JBL metal stands (model JBL JS-65 sold separately) Manufacturer: Harman International Industries, Incorporated Address: 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES European Representative: Harman International Industries, Incorporated EMEA Liaison Ofce, Danzigerkade 16, 1013 AP Amsterdam, The Netherlands Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, Harman International Industries, Limited, HP3 9TD, United Kingdom 1 x Quick Start Guide 1. Verify Box Contents 1X 1X 1X Power cord quantity and plug type vary by regions Manufacturer: Harman International Industries, Incorporated Address: 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES European Representative: Harman International Industries, Incorporated EMEA Liaison Ofce, Danzigerkade 16, 1013 AP Amsterdam, The Netherlands UK business address Hempstead, Hertfordshire,HP3 9TD, United Kingdom Ground Floor, Westside 2, London Road, Apsley, Hemel QUICK START GUIDE ENEN 2. Determine Speaker Location Set the bass contour switch based on the speakers proximity to side boundaries such as walls and inside a bookcase or cabinet. When close to a boundary the switch should be in the -3dB position in order to maintain level bass response. Away from side boundaries such as walls. Close to side boundaries such as walls or when the speaker is inside of a cabinet of bookcase. 3. Connect Physical Sources Sub Out: Single RCA to Powered Sub (Optional) Ethernet: Connect to port on wireless router for streaming BASS CONTOUR

-3dB 0dB BASS CONTOUR

-3dB 0dB Phono: Stereo RCA plus Ground Aux In: 3.5mm (1/8in) Stereo HDMI ARC: ARC from TV 2021 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specications and appearance are subject to change without notice. Part No. 950-0594-001 Rev. 1 EN 4. Pair the Remote 1 2 Press & Hold >2 sec Press & Hold >3 sec

5. Connect to a Network For a Wired Connection Connect the Ethernet port on the rear to the port on a wireless router using a CAT-5e or higher cable. For a Wi-Fi Direct Connection 1. On your mobile device, download and open the Google Home App. 2. Follow Google Home instructions to add devices. 3. Follow the prompts for adding devices. Note: We recommend giving the speaker a common name so that it can be easily found for streaming later. NOTE: If a name other than L75ms is selected during this step, write it down as it will be what is used to connect to the unit when streaming or using Bluetooth. 6. Connect a Source via Bluetooth 1 2 3 Select the Bluetooth Source Press & Hold >3 sec Select L75ms in your devices Bluetooth menu ENEN

, , 06901 , ., 400, 1500 OOO , , 127018, ., . , .12, 1

JBL 1 5

www.harman.com/ru . +7-800-700-0467

, 2010 : 000000-MY0000000, M -

( - , B - , C - ..) Y - (A - 2010, B - 2011, C - 2012 ..). ,

, . . , - . SJ/T 11364 O X GB/T 26572 GB/T 26572

(EPuP)

(Pb) O X O P O

(Hg) F O O O

(Cd) O O O

(Cr(VI))

(PBB)

(PBDE) O O O O O O O O O www.jbl.com/specialtyaudio Important Safety Instructions SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 1 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 1 10/27/2021 11:08:50 AM 10/27/2021 11:08:50 AM ENGLISH IMPORTANT SAFETY INSTRUCTIONS For all products:

1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with a dry cloth. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Do not block any ventilation openings. Install this apparatus in accordance with the manufacturers instructions. Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. Use only attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. 14. 15. 16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. To disconnect this apparatus from the AC mains completely, disconnect the power- supply cord plug from the AC receptacle. The mains plug of the power-supply cord shall remain readily operable. This apparatus is intended to be used only with the power supply and/or charging cable provided by the manufacturer. The following instructions may not apply to waterproof devices. Refer to your device user manual or quick start guide for more waterproof instruction if any. Do not use this apparatus near water. Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. THIS SYMBOL ON THE PRODUCT MEANS THERE IS UNINSULATED, DANGEROUS VOLTAGE WITHIN THE PRODUCT ENCLOSURE THAT MAY PRESENT A RISK OF ELECTRICAL SHOCK. THIS SYMBOL ON THE PRODUCT MEANS THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS GUIDE. CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B) FCC SDOC SUPPLIER'S DECLARATION OF CONFORMITY HARMAN International hereby declares that this equipment is in compliance with the FCC Part 15 Subpart B. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.jbl.com/specialtyaudio Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by HARMAN could void the user's authority to operate the equipment. For Products That Transmit RF Energy:

(i) FCC AND IC INFORMATION FOR USERS This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.

(ii) FCC/IC Radiation Exposure Statement This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. Main Unit of this equipment should be installed and operated with minimum distance 20cm between the radiator & your body. In case this equipment has to subject to FCC/IC SAR (Specific Absorption Rate) exposure test, this equipment is designed to meet the requirements for exposure to radio waves established by the FCC and ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. T he highest SAR value reported under this standard during product certification for use when properly worn on the body or on the head, with no separation. To meet RF exposure guidelines and reduce exposure to RF energy during the operation, this equipment should be positioned at least this distance away from the body or the head. For radio equipment operates in 5150-5850MHz FCC and IC Caution:

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage to LE LAN (Licence-

Exempt Local Area Network) devices. No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules. SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 2 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 2 10/27/2021 11:08:50 AM 10/27/2021 11:08:50 AM IC Caution:

User should also be advised that:

(i) The device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p. limit: and The maximum antenna gain permitted for devices in the band 5725 - 5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.

(ii) Use Restriction Attention in European Union, operation is limited to indoor use within the band 5150-5350 MHz. Correct disposal of this product (Waste Electrical & Electronic Equipment) This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. This product is RoHS compliant. This product is in compliance with Directive 2011/65/EU and UK The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and its amendments, on the restriction of the use of certain hazardous substances in electrical and electronic equipment. REACH REACH (Regulation No 1907/2006) addresses the production and use of chemical substances and their potential impacts on human health and the environment. Article 33(1) of REACH Regulation requires suppliers to inform the recipients if an article contains more than 0.1 % (per weight per article) of any substance(s) on the Substances of Very High Concern (SVHC) Candidate List ('REACH candidate list'). This product contains the substance "lead"(CAS-

No. 7439-92-1) in a concentration of more than 0.1% per weight. At the time of release of this product, except for the lead substance, no other substances of REACH candidate list are contained in a concentration of more than 0.1% per weight in this product. Note: On June 27, 2018, lead was added to the REACH candidate list. The inclusion of lead in the REACH candidate list does not mean that lead-containing materials pose an immediate risk or results in a restriction of permissibility of its use. For devices with headphone jacks WARNINGS/CAUTIONS Do NOT use the headphones at a high volume for any extended period.

- To avoid hearing damage, use your headphones at a comfortable, moderate volume level.

- Turn the volume down on your device before placing the headphones on your ears, then turn the volume up gradually until you reach a comfortable listening level. For Products That Include Batteries Instructions for Users on Removal, Recycling and Disposal of Used Batteries To remove the batteries from your equipment or remote control, reverse the procedure described in the owner's manual for inserting batteries. For products with a built-in battery that lasts for the lifetime of the product, removal may not be possible for the user. In this case, recycling or recovery centers handle the dismantling of the product and the removal of the battery. If, for any reason, it becomes necessary to replace such a battery, this procedure must be performed by authorized service centers. In the European Union and other locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner. Contact your local waste-management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries. WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakage of flammable liquid/

gas, don't disassemble, crush, puncture, short external contacts, expose to temperature above 60C (140F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries. The symbol indicating

'separate collection' for all batteries and accumulators shall be the crossed-out wheeled bin shown below:

WARNING - For Products That Contain Coin/

Button Cell Batteries DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. For All Products with Wireless Operation:

HARMAN International hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.jbl.com/specialtyaudio. HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice. www.jbl.com/specialtyaudio SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 3 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 3 10/27/2021 11:08:50 AM 10/27/2021 11:08:50 AM FRANAIS CONSIGNES DE SCURIT IMPORTANTES 8. 7. Pour tous les produits:

1. 2. 3. 4. 5. 6. Lisez ces instructions. Conservez ces instructions. Tenez compte de tous les avertissements. Suivez toutes les instructions. Nettoyez uniquement avec un chiffon sec. Ne bouchez aucune ouverture de ventilation. Installez cet appareil conformment aux instructions du fabricant. Ninstallez pas cet appareil proximit dune source de chaleur telle que des radiateurs, des bouches de chaleur, des fourneaux ou dautres appareils (y compris les amplificateurs) qui produisent de la chaleur. Ne dtournez pas lobjectif de scurit de la fiche polarise ou de mise la terre. Une fiche polarise a deux lames dont lune est plus large que lautre. Une fiche avec mise la terre a deux lames et une troisime broche de mise la terre. La lame large ou la troisime broche sont conues pour votre scurit. Si la fiche fournie ne sinsre pas correctement dans votre prise, consultez un lectricien pour le remplacement de la prise obsolte. vitez de marcher sur le cordon secteur ou de le pincer, en particulier au niveau des fiches, des prises de courant et son point de sortie de lappareil. Utilisez seulement des complments/accessoires spcifis par le constructeur. Utilisez lappareil seulement avec le chariot, pied, trpied, support ou table spcifi par le constructeur, ou vendu avec lappareil. Lors de lutilisation dun chariot, faites attention en dplaant lensemble chariot/appareil afin dviter des blessures dues un basculement. 11. 10. 9. 12. 13. 14. 15. 16. Dbranchez cet appareil pendant les orages ou sil est inutilis pendant de longues priodes. Toutes les rparations doivent tre effectues par un personnel qualifi. Une rvision est ncessaire si lappareil a t endommag dune faon quelconque, si le cordon ou la fiche dalimentation sont endommags, si du liquide a t renvers sur lappareil ou si des objets sont tombs dedans, si lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas normalement ou sil est tomb. Pour dbrancher cet appareil du secteur compltement, dbranchez la fiche du cordon dalimentation de la prise secteur. La fiche secteur du cordon dalimentation doit rester immdiatement accessible. Cet appareil est prvu pour tre utilis uniquement avec lalimentation lectrique et/ou le cble de charge fourni par le fabricant. Les instructions suivantes peuvent ne pas sappliquer aux appareils tanches. Reportez-vous au mode demploi ou au guide de dmarrage rapide de votre appareil pour obtenir plus dinstructions sur les appareils tanches, le cas chant. Nutilisez pas cet appareil prs de leau. Lappareil ne doit pas tre expos un gouttement ou des projections et aucun objet rempli de liquide, tel qu'un vase, ne doit tre plac sur lappareil. AVERTISSEMENT: POUR RDUIRE LE RISQUE D'INCENDIE OU D'LECTROCUTION NE PAS EXPOSER CET APPAREIL LA PLUIE OU L'HUMIDIT. ATTENTION RISQUE D'LECTROCUTION. NE PAS OUVRIR. CE SYMBOLE SUR LE PRODUIT SIGNIFIE QUIL Y A UNE TENSION DANGEREUSE NON ISOLE DANS LE BOTIER DU PRODUIT QUI PEUT PRSENTER UN RISQUE D'LECTROCUTION. ATTENTION CE SYMBOLE SUR LE PRODUIT SIGNIFIE QUE CE MANUEL CONTIENT DES INSTRUCTIONS DUTILISATION ET DENTRETIEN IMPORTANTES. MISE EN GARDE FCC ET DCLARATION IC POUR LES UTILISATEURS

(TATS-UNIS ET CANADA UNIQUEMENT) Cet appareil est conforme aux normes de la partie 15 des rglements de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne peut pas provoquer d'interfrence nuisible, et (2) cet appareil doit accepter toute interfrence reue y compris du type pouvant crer un fonctionnement indsirable. CAN ICES-003(B)/NMB-003(B) DCLARATION DE CONFORMIT DU FOURNISSEUR (SDOC) DE LA FCC HARMAN International dclare par le prsent document que cet quipement est conforme la sous-partie, partie 15 de la FCC. La dclaration de conformit peut tre consulte dans la section support de notre site Web, accessible sur www.jbl.com/specialtyaudio. Dclaration sur les interfrences de la Federal Communication Commission Cet quipement a t test et est conforme aux limites applicables un dispositif numrique de Classe B, selon le chapitre 15 de la rglementation de la FCC. Ces limites sont prvues pour offrir une protection raisonnable contre les interfrences nuisibles au sein dune installation rsidentielle. Cet quipement gnre, utilise et peut rayonner une nergie radiofrquence et, sil nest pas install et utilis conformment aux instructions, peut causer des interfrences nuisibles aux communications radio. Labsence dinterfrences au sein dune installation particulire nest cependant pas garantie. Sil savre que cet quipement cause des interfrences nuisibles la rception des appareils de radio ou de tlvision, ce quon peut dterminer en allumant et en teignant lquipement, nous conseillons lutilisateur dessayer de corriger ces interfrences en prenant une ou plusieurs des mesures suivantes:

Rorienter ou repositionner lantenne rceptrice. loigner davantage l'quipement du rcepteur. Brancher lquipement sur la prise dun circuit diffrent de celui auquel est connect le rcepteur. Consulter le revendeur ou un technicien expriment en radio et tlvision. Attention : Les altrations ou modifications sans autorisation expresse de HARMAN pourraient faire perdre lutilisateur son droit utiliser cet quipement. Pour les produits qui mettent de l'nergie RF :

(i) INFORMATIONS FCC ET IC DESTINES AUX UTILISATEURS Cet appareil est conforme la partie 15 des rglements de la FCC et aux normes CNR non soumises licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne peut pas provoquer d'interfrence nuisible ; et (2) cet appareil doit accepter toute interfrence reue y compris du type pouvant crer un fonctionnement indsirable.

(ii) Dclaration relative l'exposition aux rayonnements FCC/IC Cet quipement est conforme aux limites d'exposition aux rayonnements FCC et ISED dfinies pour un environnement non contrl. Main Unit of Vous devez installer et utiliser cet appareil en respectant une distance minimale de 20 cm entre votre corps et

&l'lment rayonnant. Si cet quipement doit tre soumis un test dexposition DAS (dbit d'absorption spcifique) FCC/IC, cet quipement est conu pour rpondre aux exigences dexposition aux ondes radio tablies par la FCC et ISED. Ces exigences fixent une limite de DAS de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur DAS la plus leve rapporte selon cette norme lors de la certification du produit pour une utilisation lorsquil est correctement port sur le corps ou sur la tte, sans sparation. Pour respecter les directives dexposition aux RF et rduire lexposition lnergie RF pendant son utilisation, cet quipement doit tre plac au moins cette distance du corps ou de la tte. SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 18 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 18 10/27/2021 11:08:52 AM 10/27/2021 11:08:52 AM hors de porte des enfants. Si le logement de la pile ne se ferme pas parfaitement, nutilisez plus le produit et conservez-le hors de porte des enfants. Si vous pensez qu'une pile pourrait avoir t avale ou introduite dans une partie du corps, consultez un mdecin immdiatement. Pour tous les produits avec fonctionnement sans fil:

HARMAN International dclare ici que cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive2014/53/UE. La dclaration de conformit peut tre consulte dans la section support de notre site Web, accessible sur www.jbl.com/specialtyaudio. Pour lquipement radio fonctionnant en 5 150 -

5 850 MHz Mises en garde de la FCC et dIC :

Les radars puissance leve sont dsigns comme utilisateurs prioritaires des bandes 5,25 5,35 GHz et 5,65 5,85 GHz. Ces stations radar peuvent provoquer des interfrences et/ou endommager les appareils LE LAN (License-Exempt Local Area Network, rseaux locaux exempts de licence). Aucun contrle de configuration nest fourni pour cet quipement sans fil permettant une modification de la frquence de fonctionnement l'extrieur de laccord d'autorisation de la FCC pour son exploitation aux tats-Unis selon la partie 15.407 des rglements de la FCC. Avertissement dIC :

L'utilisateur doit galement tre averti des points suivants:

(i) Lappareil destin fonctionner dans la bande 5150- 5250MHz est destin uniquement une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable caus aux systmes mobiles par des systmes satellites sur le mme canal; (ii) le gain d'antenne maximal autoris pour les appareils dans les bandes 5250- 5350 MHz et 5470- 5725 MHz doit tre conforme la limite de PIRE: et

(ii) le gain dantenne maximal autoris pour les dispositifs dans la bande 5725- 5825MHz doit tre conforme aux limites de PIRE spcifies pour un fonctionnement point point et non point point, selon le cas. Restriction d'utilisationAttention, en Union europenne, emploi est limit une utilisation en intrieur dans la bande 5150- 5350 MHz. limination correcte de ce produit (Dchets dquipements lectriques et lectroniques) Ce symbole signifie que le produit ne doit pas tre jet comme dchet mnager et doit tre remis une installation de collecte approprie pour son recyclage. Une limination et un recyclage appropris aident protger les ressources naturelles, la sant humaine et lenvironnement. Pour obtenir plus dinformations sur llimination et le recyclage de ce produit, contactez votre municipalit locale, le service de gestion des dchets ou le magasin o vous avez achet ce produit. Ce produit est conforme la RoHS. Ce produit est conforme la directive 2011/65/UE et ses amendements sur la restriction de l'utilisation de certaines substances dangereuses dans les quipements lectriques et lectroniques. REACH REACH (rglement N 1907/2006) concerne la production et l'utilisation de substances chimiques ainsi que leurs impacts potentiels sur la sant humaine et l'environnement. Larticle 33(1), du rglement REACH exige des fournisseurs quils informent les destinataires si un article contient plus de 0,1% (par poids et par article) dune ou plusieurs substances figurant sur la liste candidate des substances extrmement proccupantes (SVHC, substances of very high concern) (Liste candidate REACH). Ce produit contient la substance plomb (N CAS 7439-92-1) une concentration suprieure 0,1% en masse. Au moment de la production de ce produit, part la substance plomb, aucune autre substance de la liste des candidates REACH nest prsente une concentration suprieure 0,1 % en masse dans ce produit. Remarque: Le 27 juin 2018, le plomb a t ajout la liste des substances candidates REACH. L'inclusion du plomb dans la liste des substances candidates REACH ne signifie pas que les matriaux contenant du plomb posent un risque immdiat et ne conduit pas une restriction dautorisation de leur utilisation. Pour les appareils avec prises casques AVERTISSEMENTS/MISES EN GARDE Nutilisez PAS le casque un volume lev pendant une priode prolonge.

- Pour viter des dommages auditifs, utilisez votre casque un niveau de volume confortable et modr.

- Baissez le volume de votre appareil avant de placer le casque sur vos oreilles, puis augmentez progressivement le volume jusqu atteindre un niveau dcoute confortable. Pour les produits qui incluent des batteries Instructions pour les utilisateurs sur le retrait, le recyclage et la mise au rebut des batteries usages Pour retirer les batteries de votre quipement ou tlcommande, inversez la procdure dcrite dans le mode d'emploi pour les insrer. Pour les produits avec une batterie intgre qui dure toute leur dure de vie, le retrait peut ne pas tre possible pour l'utilisateur. Dans ce cas, les centres de recyclage ou de rcupration grent le dmontage du produit et le retrait de la batterie. Si, pour une raison quelconque, il devient ncessaire de remplacer une telle batterie, cette procdure doit tre excute par les centres de service agrs. Dans l'Union europenne et d'autres rgions, il est illgal de jeter une batterie avec les dchets mnagers. Toutes les batteries doivent tre limines en respectant l'environnement. Contactez les fonctionnaires locaux responsables de la gestion des dchets pour obtenir des informations sur la collecte, le recyclage et la mise au rebut des batteries usages respectueux de l'environnement. AVERTISSEMENT : Il y a un risque d'explosion si la batterie est mal remplace. Pour rduire le risque d'incendie, dexplosion ou de fuite de liquide/ gaz inflammable, vous ne devez pas dmonter, craser, percer, mettre les contacts externes en court-circuit, exposer une temprature suprieure 60C (140F), au soleil ou un quivalent, exposer une pression atmosphrique extrmement basse ou jeter la batterie dans le feu ou l'eau. Remplacez-les uniquement par les batteries spcifies. Le symbole indiquant la collecte spare de toutes les batteries et accumulateurs est le bac roues barr reprsent ci-dessous:

AVERTISSEMENT - Pour les produits contenant des piles pices/ boutons NE PAS AVALER LA PILE, RISQUE DE BRLURE CHIMIQUE. Ce produit contient une pile pice / bouton. Si la pile pice/ bouton est avale, cela peut entraner de graves brlures internes en seulement 2 heures et aboutir au dcs. Conservez les piles neuves et uses HARMAN International Industries, Incorporated. Tous droits rservs. JBL est une marque commerciale de HARMAN International Industries, Incorporated, dpose aux tats-Unis et/ou dans d'autres pays. Les caractristiques, les spcifications et l'aspect sont susceptibles d'tre modifis sans pravis. www.jbl.com/specialtyaudio SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 19 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 19 10/27/2021 11:08:52 AM 10/27/2021 11:08:52 AM Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, United States European Representative:

Harman International Industries, Incorporated EMEA Liaison Office, Danzigerkade 16, 1013 AP Amsterdam, The Netherlands UK Business Address:

Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, HP3 9TD, United Kingdom SSL2021-001 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 64 SSL2021-001_JBL_Safety Sheet_(150 x 80mm)_V1.indd 64 10/27/2021 11:09:03 AM 10/27/2021 11:09:03 AM

oetech@fcc.gov 20211019 21:38 Chen, June-YJ (Guangzhou)

[EXTERNAL] Response to Inquiry to FCC (Tracking Number 879428) Chen, June-YJ (Guangzhou) Follow Up Flag:

Flag Status:

Follow up Flagged From:

Sent:

To:

Subject:

***WARNING:thismessageisfromanEXTERNALSENDER.Pleasebecautious,particularlywithlinksand attachments.***

Inquiryon10/19/2021:

Inquiry:

Hello, Pleasefindtheattachedproductphotoforremotecontroller. The15.19warningstatementisimpracticabletoputonthetextureoftheproduct.Wewillputitontheuser manual. Pleaseapprove. Bestregards, JuneChen 15.19Labelingrequirements.

(3)Allotherdevicesshallbearthefollowingstatementinaconspicuouslocationonthedevice:

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1) Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation.

(5)Whenthedeviceissosmallorforsuchusethatitisimpracticabletolabelitwiththestatementspecified underparagraph(a)ofthissectioninafontthatisfourpointorlarger,andthedevicedoesnothaveadisplay thatcanshowelectroniclabeling,thentheinformationrequiredbythisparagraphshallbeplacedintheuser manualandmustalsoeitherbeplacedonthedevicepackagingoronaremovablelabelattachedtothedevice. FCCresponseon10/19/2021 1 Hello, Weacceptyourproposaltoplacethe15.19statementinthemanual. AttachmentDetails:

Donotreplytothismessage.PleaseselecttheReplytoanInquiryResponselinkfromtheOETInquirySystemto addanyadditionalinformationpertainingtothisinquiry. 2

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration A p p lica n t D e cla ra tio n L e tte r Applicant Legal Business Name Harman International Industries, Inc Address 8500 Balboa BoulevardNorthridge, 91329, California, United States Grantee Code API FCC ID APIJBLBTRC Authorized Contact Name Terry Shi Contact Email Contact Phone terry.shi@harman.com 86-75523189391 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 10/12/2021 Print Name: Terry Shi Title: Prin.Engineer,Regulatory Compliance, Quality

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Harman International Industries, Inc Date: 10/12/2021 Authority letter FCC TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: APIJBLBTRC To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benef its, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility f or complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Harman International Industries, Inc. This authorization is valid until further written notice from the applicant. Title: Prin.Engineer,Regulatory Compliance, Quality Name (Printed): Terry Shi Signature:

On behalf of Company: Harman International Industries, Inc

Harman International Industries, Inc Conf identiality Request regarding application for FCC ID: APIJBLBTRC 8500 Balboa Boulevard Northridge, California, 91329, United States SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Conf idential letter FCC To:

From: Harman International Industries, Inc Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request conf idential treatment of the documents listed below, associated with the certification application ref erenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this inf ormation may prove harmful to the business of the applicant. Sincerely, Title: Prin.Engineer,Regulatory Compliance, Quality Name (Printed): Terry Shi Signature:

On behalf of Company: Harman International Industries, Inc