FCC ID: 2AVY2GED7 dLight

GED7 QUICK START GUIDE

@ Desk lamp

@ Adapter ol eon YH H

@ Quick Start Guide Quick start guide ATX 1. Lamp head( light) 2. Hinge 3. Lamp pole 7. Slide (brightness) 4. Rotation 8. USB 5. On/Off 9. DC jack 6. Slide (color temp.) 10. Reset 2

@ Insert the power plug into the DC Jack at the base, and the larger power brick into the socket. 0 tq _ 5 et say

@ Powering on/off Touch down on the on/off button once to turn the lamp on/off.

@ Slide a) Right slide to adjust the lamp's brightness b) Left slide to adjust the lamp's color temperature

@ Connect with your device a) USB connect b) Wifi Google Assistant

@ Light source angled upwards and downwards from 0 to 180.

@ The lamp pole rotated left 45 and right 45.

@ Adjust the length from 442mm to 658mm.

@ Angle up and down adjusted 180

@) Adjust the length from 442mm to 658mm

@) Rotated left 45 and right 45 The reset hole is on the back of the base. Power on the lamp, insert a straightened tool into the hole for 5 seconds until the light flashes. The reset complete when the flash stops, and the lamp is re-lited on. Model:GED7 Operating temperature:-10~40C Operating aumidity:0~85%RH Service life:2500h Color rendering index:Ra 93 TLC: >95 Rated input power: W Rated input:100~240V 50/60Hz

. If the power code is damaged, it must be replaced by the manufacture or a qualified service engineer to avoid and risk to safety. Suitability for use indoors. Please use the power resource correctly in the door. Do not disassemable the product. The light-emitting diode may cause damage to your eye. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement 10 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme 4 la norme NMB-003 du Canada. MANUFACTURER: HCC TELETRON (HK) TECHNOLOGY CO. , LIMITED ADDRESS:RM 1501 GRAND MILLENNIUM PLAZA (LOWER BLK) 181 QUEEN S RD CENTRAL FCC ID: 2AVY2GED7 IC: 26310-GED7 11

Model: GED7 Lamp Input: 24V == 1.2A ta40C Rated Power: 14W (Lamp) Manufacturer: HCC Teletron

(HK) Technology Co, Limited FCC ID: 2AVY2GED7 ICID: 26310-GED7 Made in China R92/L850001

HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED Date: 27 Aug, 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED, the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AVY2GED7 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED. The HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely,

(signature) LAHEY, vex MU Print name: Chen yen-yu Title: Sv.Director HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED

HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED FCC C2PC Request Letter NOV. 18, 2021 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: Class II permissive change for FCC ID: 2AVY2GED7 To Whom It May Concern:

HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED respectfully requests a class II permissive change for FCC ID: 2AVY2GED7, original grant date 09/29/2021. There are no hardware or RF parameters software changes. Except below:

Change1: Added a new model of adapter (model: PYS-240H120U001) for EUT, so just Radiated Spurious Emission for below 1GHz & Conducted Emission were retested. Thank you for your attention to this matter. Yours Sincerely. Print name: Chen yen-yu Signature: Sv.Director Company name: HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED LHE/, Ex lv

HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED Date: 27 Aug, 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED FCC ID: 2AVY2GED7 FCC Certification Confidenti Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED requests that the following documents regarding this submission for FCC ID : 2AVY2GED7 be kept Long-Term confidential:

Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description | Operational Description.pdf And below exhibit kept short-term confidential (180 days):

Exhibit Type File Name External Photos External Photo.pdf Internal Photos Internal Photo.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, HCC TELETRON

(HK) TECHNOLOGY CO.,LIMITED considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely,

(signature) LHEY, ke tL Print name: Chen yen-yu Title: Sv.Director HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED

HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED Date: 29 Sep, 2021 To: Federal Communications Commission, Authorization & Evaluation Di 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED, the undersigned, hereby Declares the product for Model: GED7, EUT Type : dLight , FCC ID: 2AVY2GED7_ , PCB Antenna(see below picture) has been abandoned . Yours Sincerely, LHEN, ERTL

(signature) Print name: Chen yen-yu Title: Sv.Director HCC TELETRON (HK) TECHNOLOGY CO.,LIMITED