ADJUSTMENT FEATURES HANDLEBAR HAND POSITIONS Seated Flat Hand Position 1 or 2 Seated Climb Hand Position 2 Standing Flat Hand Position 2 Standing Climb Hand Position 3 Jumps Hand Position 2 Page | 9 APP DOWNLOAD Scan the QR code on the tablet mount and follow the directions on your device. Page | 10 REGULATORY INFORMATION Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in an individual installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the bike and the affected receiver. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Hazardous Materials and Proper Disposal The batteries within self-powered equipment contain materials considered hazardous to the environment. Federal law requires proper disposal. Product Recycling and Disposal This equipment must be recycled or discarded per applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the framework for the return and recycling of used equipment as applicable throughout the European Union. The WEEE label indicates that the product is not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance with the European WEEE Directive, electrical and electronic equipment
(EEE) is to be collected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE label per Annex IV of the WEEE Directive must not dispose of end of life EEE as unsorted municipal waste. Always use the collection framework available to customers for the return, recycling, and recovery of WEEE. Customer participation is important to minimize any potential effects of EEE on the environment and human health due to the potential presence of hazardous substances in EEE. For proper collection and treatment, contact Inspire Customer Support. Page | 11 WARRANTY This Warranty applies to Inspire cardio products manufactured or distributed by Inspire Fitness. Inspire IC1.5 Warranty Periods RESIDENTIAL WARRANTY FRAME Includes Main Frame and Welds PARTS Excluding Paint and Finish
(unless defective out of box) LABOR 10 Years 3 Years 1 Year Inspire Fitness warrants that the Product you have purchased for personal, family or household use from Health in Motion or from an authorized Inspire Fitness reseller is free from defects in materials or workmanship under normal use during the warranty period. Your sales receipt, showing the date of purchase of the Product, is your proof of the date of purchase. This warranty extends only to you, the original purchaser. It is not transferable to anyone who subsequently purchases the Product from you. It excludes expendable parts such as paint and finish. This Warranty becomes VALID ONLY if the Product is assembled / installed according to the instructions / directions included with the Product. Replacement and Repair of Parts During the warranty period Inspire Fitness will, at no additional charge, repair or replace the Product if it becomes defective, malfunctions, or otherwise fails to conform with this Warranty under normal personal, family, or household use. In repairing the product Inspire Fitness may replace defective parts with, at the option of Inspire Fitness, serviceable used parts that are equivalent to new parts in performance, or new parts. All exchanged parts and Products replaced under this warranty will become the property of Inspire Fitness. Inspire Fitness reserves the right to change manufacturers and or specification of any part to cover any existing warranty. Service Procedures To obtain warranty parts, you must return the parts to Inspire Fitness or an authorized Inspire Fitness retailer in its original container (or equivalent). You must pre-pay any shipping charges, taxes, or any other charges associated with transportation of the Product. In addition, you are responsible for insuring any Product shipped or returned. You assume the risk of loss during shipment. You must present Inspire Fitness with proof-of-purchase documents (including the date of purchase, Model, and Serial Number). Any evidence of alteration, erasing or forgery of proof -of-purchase documents will be cause to void this Warranty. Register your warranty online visit www.inspirefitness.com. Conditions and Exceptions This Warranty does not extend to any Product not purchased from Inspire Fitness or from an authorized Inspire Fitness reseller. This Warranty does not extend to any Product that has been damaged or rendered defective; (a) as a result of accident, misuse, or abuse; (b) by the use of parts not manufactured or sold by Inspire Fitness; (c) by modification of the Product; (d) as a result of service by anyone other than Inspire Fitness, or an authorized Inspire Fitness warranty service provider; (e) product that has not been properly maintained (follow maintenance schedule found on product). Should any product submitted for Warranty service be found to be ineligible, an estimate of repair cost will be furnished, and the repair will be made if requested by you upon Inspire Fitness receipt of payment or acceptable arrangement of payment. Page | 12 IC1.5 EXPLODED VIEW Page | 13 UKS.oN BC423-200-010 noitpircseD main frame BC423-320-006PZ handlebar assembly BC423-220-004 front stabilizer BC423-220-003 rear stabilizer 100-043-564BR/L5 tfel dna thgir ladep knarc BC423-320-007 handlebar post BC423-320-005 seat post support BC423-320-004 seat post free rail BC423-340-001PZ magnet holder assembly BC423-380-001 crankshaft assembly 620-188-324CB revoc bonk ecnatsiser 520-188-324CB laid ylbmessa ecnatsiser BC423-561-024 resistance assembly bolt A900-188-324CB revoc noitaroced 010-188-324CB pot-tun erauqs 110-188-324CB mottob-tun erauqs 910-165-324CB eveels 300-004-324CB BC423-881-012B taes plug 0117-208-004 0116-608-008 socket cap screw arc washer 0113-208-458A hexagon socket button head screws BC423-630-018/023 battery board(with button battery) BC423-881-062 logo cover BC423-321-009 adjustment plate BC423-881-032A slide plate BC423-881-034A adjustment knob BC423-881-006A tube sleeve BC423-881-027A tube sleeve BC423-881-014A plug BE920-881-011 rear foot pad BC423-881-055A transportation rollers BC423-881-001 right shroud BE480-881-005 cover 295-014-0110 BC850-561-022 BC850-561-032 tun egnalf right crank left crank BC423-881-007A bottom bracket cover BC423-501-001 belt BC423-630-017 PCB board BC423-630-022 plastic washer 300-188-324CB revoc 400-188-324CB A- revoc draob BCP B500-188-324CB B- revoc draob BCP 101-027-0110 C13-132-0020 A530-188-324CB 150-165-324CB 720-165-324CB 550-165-324CB tun nolyn gniraeb bonk L eveels tengam ecaps 200-188-324CB duorhs tfel A100-083-324CB redloh elttob retaw 820-807-0110 820-607-0110 A29-110-21CB B27-110-21CB tun nolyn tun nolyn tekcarb U tlob noisnet 110-165-324CB elxa C30-006-1710 gniraeb 1 2 3 4 6 7 8 9 10 11 21 13 41 51 61 71 81 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 63 37 38 39 40 41 42 34 44 54 64 74 84 94 05 15 25 35 45 55 65 75 85 95 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 6 4 1 1 1 1 1 1 1 1 4 4 2 1 2 2 1 1 1 1 1 3 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 2
.ytQ UKS.oN noitpircseD
.ytQ 130-165-324CB06 eveels yellup sserp 050-188-324CB16 yellup sserp 800-600-611026 rehsaw talf A821-600-111036 010-123-324CB46 tlob xeh etalp xif 110-108-077CB56 redloh rosnes eriw htiw rosnes deeps120/910-036-324CB66 A800-188-324CB76 revoc llams 800-803-011086 800-800-011096 tun nroca tun xeh A820-165-324CB07 eveels ekarb 810-165-324CB17 tun erauqs 72 BC423-561-012 ywheel with aluminum ring 000-036-171037 gniraeb 520-165-324CB47 eveels leehwylf 800-010-611057 rehsaw talf 201-011-011067 tun A220-188-324CB77 leehwylf- revoc llams 78 0114-142-138 cross recessed pan head tapping screws A320-188-324CB97 gulp rebbur 310-165-324CB08 tfahs leehwylf A101-010-011018 niht-tun xeh 740-188-324CB28 leehwylf 851-010-011038 niht-tun xeh 84 0113-105-108A cross recessed pan head screw 15 30-500-611058 800-503-011068 rehsaw talf tun nroca 87 0113-105-058 cross recessed pan head screw 88 0113-104-110 cross recessed pan head screw 90 0113-105-158 cross recessed pan head screw 91 0113-206-458 hexagon socket button head screws 80-211-711029 gnir gnirps 610-165-324CB39 elxa 94 BC423-340-001 magnet holder A410-165-324CB59 gnirps noisnet 96 BC423-321-016 sensor xture 97 BC423-881-024A magnet cradle A910-188-324CB89 dap ekarb 510-165-324CB99 tengam 100 BC423-320-006 handlebar 400-168-324CB101 pirg gnippid 801-607-3110301 wercs pac tekcos A130-188-324CB401 revoc rabeldnah 510-123-324CB501 etalp 820-188-324CB801 pot-esab redloh daPi 201-251-4110011 swercs daeh nap dessecer ssorc 831-531-3110111 cross recessed pan head tapping screws B350-188-324CB211 reppu-troppus redloh daPi A450-188-324CB311 mottob-troppus redloh daPi 400-602-3110411 wercs pac tekcos A920-165-324CB511 tevir noitator A250-188-324CB611 esab troppus A801-241-4110711 swercs gnippat daeh nap dessecer ssorc 750-088-324CB811 ylbmessa redloh daPi 810-098-324CB911 kcap erawdrah 1 1 3 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 6 6 1 2 1 3 2 2 4 4 5 2 1 2 1 1 1 1 1 1 2 1 2 3 1 1 1 2 8 1 1 2 1 1 4 1 1 BC423-881-061 seat adjustment knob 89 0114-142-198 cross recessed pan head tapping screws RED Declaration of Conformity (DoC) Unique identification of this DoC: . We, Manufacturers name: Health In Motion, LLC Manufacturers Address: 255 Airport Circle, Suite 101 Corona, California 92880, United States
.................................................................................................................................................... declare under our sole responsibility that the product:
product name: SPIN BIKE trade name:
type or model: IC1.5 relevant supplementary information:
(e.g. lot, batch or serial number, sources and numbers of items) to which this declaration relates is in conformity with the essential requirements and other relevant requirements of the RED Directive (2014/53/EU). The product is in conformity with the following standards and/or other normative documents:
HEALTH & SAFETY (Art. 3(1)(a)): EN 62479:2010;
EMC (Art. 3(1)(b)): EN 55014-1:2017; EN 55014-2:2015 Draft ETSI EN 301 489-1 V2.2.0:2017;
Draft ETSI EN 301 489-17 V3.2.0:2017;
SPECTRUM (Art. 3(2)): EN 300 328 V2.1.1:2016 OTHER (incl. Art. 3(3) and voluntary specs):
Other Union harmonization legislation (where applicable): N/A Accessories:
Software: N/A Technical file held by: Health In Motion, LLC Place and date of issue (of this DoC): 2020/5/14 Signed by or for the manufacturer: .................................................................................
(Signature of authorised person) Name (in print): ..................................................................... Title: ............................