CitRadar-360 USER MANUAL 2018.11 CitRadar-360 Copyright Notice The Manual is provided solely for informational purposes. Due to continuous research and improvement, specifications or design is subject to change without notice. CitRadar-360 CONTENTS 1General Description .................................................................................. 2 2 Product Function ...................................................................................... 3 3 Specifications ........................................................................................... 3 4 Installation Instruction ............................................................................. 4 4.1 Installation .................................................................................... 4 4.2 Maintenance .................................................................................. 4 4.3 Accessories .................................................................................... 4 5. FCC Warning.4 1 CitRadar-360 1General Description The CitRadar-360 radar sensor has a maximum detection range of 500m radius. In applications requiring multiple sensors, line of sight con-
siderations mean that sensors are typically placed every 500 to 700 me-
tres to achieve optimum coverage. CitRadar-360 Sensor complete a full 360 scan four times a second with range resolution of just 17.5cm. CitRadar-360 Sensor adopts compact and lightweight design, which is made by integrated manufacture to increase its roughness. Low power consumption of equipment can effectively reduce energy consumption and maintenance requirements. Figure1 CitRadar-360 Radar product Features:
High performance radar works in 77GHz ISM Band;
Special microstrip antenna design effectively avoids interference from adjacent channel target;
Accurate speed and distance measurement for multiple targets;
2 High dynamic speed measurement range with very high capture CitRadar-360 rate(99%);
2 Product Function In practical application, The radar can scan 1200 meters within the scope of the test area or road (one-way multiple lanes, two-way lanes, each cross lane), the test events include: stopped vehicles, traffic conges-
tion, vehicles queuing, reversing vehicles, and illegal invasion, and other important events in a particular area, provide important to have a basis for traffic law enforcement. 3 Specifications Frequency Range Modulating Type Maximum detection range Beam azimuth Beam Elevation Scanning speed Connector Voltage Protection grade Power Dissip Temp. Range weight 3 76~77GHz FMCW 500M 2 2 4rps 100Mb 24V IP67 15W
-30~+60 8Kg CitRadar-360 4 Installation Instruction 4.1 Installation The installation of CitRadar-360 Sensor is flexible and it can be in-
stalled in the middle of the road, on the shoulder and on the roadside. Be-
sides, it can be installed both normally and invert. 4.2 Maintenance The Sensor does not need daily cleaning. Even in a dusty place, it can be kept every three years maintenance records. 4.3 Accessories Name Sensor Power cable Ethernet cable Screw 5. FCC Warning Number 1 1 1 4 Note Any Changes or modifications not expressly approved by the party re-
sponsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject 4 CitRadar-360 to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and op-
erated with minimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful in-
terference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
5 CitRadar-360 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 6