FCC ID: 2ASWU-PS1 Advanced People Sensor, 180 mm lens distance, with IO connector

Installation and configuration manual Advanced People Sensor, Firmware 1.12 APS-90, APS-180E and APS-90-Outdoor 2 1 1

. e r a w m r i F

, S P A

, 4 0

-

8 1 0 2

, 7 7 0 0 0

-

0 2 1

-

L G A H HAGL-120-00077, 2018-04, APS, Firmware 1.12 Draft HELLA Aglaia Mobile Vision GmbH Ullsteinstrasse 140 12109 Berlin Germany Telephone: +49 30 2000429-0 Fax: +49 30 2000429-109 E-mail: people.counter.support@hella.com Internet: www.people-sensing.com 2018 HELLA Aglaia Mobile Vision GmbH, Berlin (hereinafter 'HELLA Aglaia') 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 2 Draft Supplemental directives Copyright information 2018 HELLA Aglaia Mobile Vision GmbH. All rights reserved. This manual is protected by copyright. It may not be reproduced, either in whole or in part, or stored in a database or a data backup system without the prior written consent of HELLA Aglaia Mobile Vision GmbH, nor transmitted in any form, either electron-

ically or mechanically, including photocopying and recording. Violations are subject to the criminal provi-

sions of the Copyright Act. HELLA Aglaia Mobile Vision GmbH reserves the right to revise or replace this manual at any time and without prior notice. Make sure that you have the most current version of this manual. Please dont hesitate to contact HELLA Aglaia Mobile Vision GmbH with any questions. HELLA Aglaia Mobile Vision GmbH does not guarantee the completeness, accuracy, or timeliness of the laws, guidelines, or regulations referred to or quoted, whether directly or indirectly, in this manual. It is the responsibility of the user to become familiar with the current laws, guidelines, and regulations that apply to their work. HELLA Aglaia Mobile Vision GmbH reserves the right to modify the described devices (including the respective software) without prior notice, irrespective of the content of this manual. Unless expressly agreed upon in writing, HELLA Aglaia Mobile Vision GmbH is not obligated to notify the owner or user of the devices described in this manual (including the respective software) of any revisions, updates, or modi-

fications without further request. With regard to the people counter, HELLA Aglaia Mobile Vision GmbHs liability is limited to the terms of the warranty described in this manual. The information provided in this manual is not a warranty or guar-

antee of any kind. Stipulations concerning the devices described in this manual are only deemed warran-

ties if they are expressly referred to as such in writing and contain a description of the warrantys scope and the product covered by the warranty. The product and company names mentioned in this manual may be protected trademarks of other manu-

facturers. HELLA Aglaia Mobile Vision GmbH will be happy to provide you with circuit diagrams, parts lists of the components used in the respective devices, descriptions, or other information to enable authorized personnel of the user to repair those device components that are deemed repairable by HELLA Aglaia Mobile Vision GmbH. The information contained in this manual has been prepared by HELLA Aglaia Mobile Vision GmbH with great care using sources available to HELLA Aglaia Mobile Vision GmbH. However, HELLA Aglaia Mobile Vision GmbH shall not be responsible for any errors, incorrect or incorrectly compiled data, and any conse-

quences resulting therefrom, irrespective of the legal basis, provided that HELLA Aglaia Mobile Vision GmbHs conduct amounts to no more than ordinary negligence. The aforementioned exclusion of liability does not apply to damages resulting from injury to life, body, or health or to damages that are caused intentionally, by gross negligence on the part of HELLA Aglaia Mobile Vision GmbH, or by the violation of due diligence requirements in connection with the development, manu-

facture, and distribution of the products described in this manual. This does not affect the liability regardless of negligence or fault pursuant to legal regulations such as the Product Liability Act. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 3 Draft Table of contents Table of contents 1 2 Overview............................................................................................................................................... 5 General information............................................................................................................................. 6 About this document.................................................................................................................... 6 2.1 About the manufacturer............................................................................................................... 6 2.2 2.3 Limitation of liability..................................................................................................................... 7 Scope of delivery......................................................................................................................... 7 2.4 Use of the Advanced People Sensor.......................................................................................... 7 2.5 2.6 Requirements for initial operation................................................................................................ 8 2.7 Privacy of data statement............................................................................................................ 8 Technical data...................................................................................................................................... 9 3.1 Electrical data.............................................................................................................................. 9 3.2 Optical data................................................................................................................................. 9 3.3 Environmental conditions.......................................................................................................... 10 Cleaning, maintenance and troubleshooting.................................................................................. 11 4.1 Cleaning..................................................................................................................................... 11 4.2 Maintenance.............................................................................................................................. 11 Disposal.............................................................................................................................................. 12 Appendix............................................................................................................................................ 13 6.1 CE Declaration of Conformity.................................................................................................... 13 6.2 Federal Communications Commission (FCC) Statement......................................................... 14 Glossary and abbreviations............................................................................................................. 15 Index................................................................................................................................................... 18 3 4 5 6 7 8 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 4 Draft Overview 1 Overview The Advanced People Sensor (APS) counts persons within the configured area/monitored area based on stereoscopic imaging and image processing. The counting data is stored internally and can be transferred via different interfaces for external processing. Fig. 1: People sensing 1 Advanced People Sensor (APS) 2 Configured area/monitored area 3 Counting line The results can be verified using video recording (optional). This enables a precise proof of the counting accuracy. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 5 321Draft General information About the manufacturer 2 General information 2.1 About this document This manual provides information for optimal configuration and efficient operation of the device. Personnel must carefully read and fully understand this manual before performing any installation or configuration tasks. The figures in this manual are for information only. Actual design may differ from illustrations. Target group This document is addressed to system integrators. Software and hardware version Notes All information in this manual refers to firmware version 1.12 and hardware APS. Modifications to the functionality which will be implemented through future software updates will be described in separate release notes or in an updated version of the manual. Notes and safety instructions are marked by symbols in this manual. For safety instructions the relevant symbol and words indicate the severity of the danger. NOTICE!

This combination of symbol and signal word indi-

cates a potentially dangerous situation, which can lead to property damage, data loss or misuse of the device if not avoided. This symbol highlights useful tips and recommen-

dations as well as information for efficient and trouble-free operation. 2.2 About the manufacturer Service requests Service requests regarding the device can be sent to the following e-mail address:

people.counter.support@hella.com The general contact information is shown on page 2. Warranty information The warranty information is included in the general terms and con-

ditions of Hella Aglaia. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 6 Draft 2.3 Limitation of liability 2.4 Scope of delivery General information Use of the Advanced People Sensor All the data and notes in this manual were compiled considering the applicable standards and regulations as well as the state of the art. In the following cases HELLA Aglaia assumes no liability for dam-

ages:

n Non-compliance with this manual. n Deviation from the intended use. n Assignment of untrained personnel. n Unauthorized technical changes. n Use of unauthorized accessories. For special models, use of additional order options, or current tech-

nical changes, the actual scope of delivery can deviate from the explanations and illustrations in this manual. The obligations agreed upon in the delivery contract, General terms and conditions and delivery conditions of HELLA Aglaia as well as any legal regulations applicable at the time of the contract conclusion apply. The standard scope of delivery for the Advanced People Sensor includes:

n The Advanced People Sensor. n This operating manual as a digital version by download. 2.5 Use of the Advanced People Sensor Intended use The Advanced People Sensor is a sensor assembly, which must be integrated into other systems. The Advanced People Sensor is intended for automatically counting persons in the configured monitored area. The Advanced People Sensor is intended for detecting and moni-

toring persons in the configured monitored zone or detecting wire-

less devices in combination with a wireless USB adapter. Proper and safe operation of the product requires appropriate transport, storage and installation as well as attentive operation and care. The information in this manual must also fully comply with use to be deemed intended. Any use which deviates or exceeds the intended use is considered as misuse. Non intended use 18.06.2019 The following list contains, but is not limited to, the following exam-

ples of non intended use:

n Use with unauthorized modified firmware. n Use in unsuitable environments (e.g. use outdoors if the Advanced People Sensor is not specified for outdoor opera-

tions). The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 7 Draft General information Privacy of data statement 2.6 Requirements for initial operation Accessories The following accessories are required for the initial operation of the device, but they are not included in the scope of delivery:

APS-90 and APS-180E n RJ-45 Ethernet cable n Ethernet switch with PoE or PoE injector, alternatively 24 V power supply for APS-IO models n PC or tablet for configuration APS-90-Outdoor and APS-90-Outdoor-PoE n M12 Ethernet cable n Ethernet switch with PoE or PoE injector for APS-90-Outdoor-PoE n 12 to 24 V power supply for APS-90-Outdoor n PC or tablet for configuration. PC or tablet minimum requirements n Latest web browser supporting HTML5 and WebSockets

(e.g. Mozilla Firefox 44.0, Google Chrome 48.0, Apple Safari 9.0, Microsoft Edge). n Optional OpenDHCP, to connect to a single device without any other DHCP server in the network e.g. inside a router. 2.7 Privacy of data statement It should be noted that the APS can be used as a camera, and that it is possible to record and store video data. Under certain condi-

tions it may also be possible to identify a person. The standard scope of delivery is privacy by default. The user must establish in advance whether there are legal requirements or privacy regulations applicable when using the people sensor. Appropriate measures should be taken to prevent unauthorized access to the unit. To prevent unauthorized access to the unit change the password for full access. Also change the password for service access via linux ssh. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 8 Draft Technical data Optical data Technical data 3 3.1 Electrical data Supply voltage Input voltage UPoE (PD class 0) via Ethernet Power consumption PIN (without USB load) 6 W (125 mA at 36 .. 57 V DC 48 V DC) Ethernet Transfer rate APS-90 APS-180 APS-180E 100 /

1000 MBit/s APS-90-Out-

door 10 / 100 MBit/s Cable length, maximum Connector type (APS/PC) RJ-45 100 m (328 ft) M12 D-coded, 4-

pin, female APS-90-Out-

door

-

-

APS-90 APS-180 APS-180E USB 2.0 type host Type-A Description 640 x 480 px, color 1.8 2.6 mm (0.10 in) 110 diagonal 100 horizontal 3 lx, HDR USB type Connector type (APS/PC) Category Image resolution Aperture Focal length Angle of view Light sensitivity, minimum USB 3.2 Optical data 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 9 Draft 3.3 Environmental conditions Technical data Environmental conditions Category APS-180E Operating temperature

(ambient temperature housing)

-25 to 70 C (-13 to 158 F) APS-90 APS-180 0 to 55 C

(32 to 131 F) APS-90-

Outdoor

-25 to 70 C (-13 to 158 F) Storage temperature

-40 to 85 C (-40 to 185 F)

(when device is switched off) Relative humidity

(non-condensing) 0 .. 90%

Ingress protection

(DIN IEC 60529) IP40 Illuminance, minimum 3 lx 95% .. 100%

short-time maximum

(relative) IP65 in conjunc-

tion with appropriate mating connectors 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 10 Draft Cleaning, maintenance and troubleshooting Maintenance Cleaning, maintenance and troubleshooting 4 4.1 Cleaning Materials:

n Lint-free cloth n Commonly available neutral cleaners diluted with water Optimal counting accuracy can be achieved only if the view of the cameras is not obstructed. 1. Check the lens cover plate or outside housing for dirt, scratches and stickers at regular intervals. NOTICE!

Reduced transparency by cleaning with sol-

vents Solvents can reduce the transparency of the lens cover plate. Do not use cleaning agents containing solvents

(such as gasoline, acetone, petroleum and tur-

pentine) 2. Clean the lens cover plate or the housing if necessary. 4.2 Maintenance The device does not require any preventive maintenance. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 11 Draft 5 Disposal Disposal After decommissioning, the product shall be recycled as waste electronic in an environmentally safe way. In the European Union, the WEEE Directive 2012/19/EU applies. HELLA Aglaia will recol-

lect its own electronic products free of charge and take care of the further processing. Decommissioned devices can be sent to the address:

HELLA Aglaia Mobile Vision GmbH Ullsteinstrasse 140 12109 Berlin Germany Please clearly mark the goods as waste. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 12 Draft Appendix 6 6.1 CE Declaration of Conformity Appendix CE Declaration of Conformity Fig. 2: APS-180E CE declaration 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 13 CE EU Konformittserklrung / EU Declaration of Conformity (DoC) Wir/ We, Hella Aglaia Mobile Vision GmbH ( Name des Herstellers/ seines Vertreters I manufacturer / authorised representative) Ullsteinstrae 140, 12109 Berlin, Deutschland ( Adresse I address) erklren auf eigene Verantwortung, dass das Produkt/ declare under our own responsibility that the product Automatie People Sensor; APS-180E, APS-1 S0E-1O ( Produktbeschreibung; Modellnamen I product description; model names) auf das sich diese Erklrung bezieht, die Anforderungen nach den folgenden Normen einhlt: to which this dec/aration refers complies with the following standards: EMC ; EN 55024:2010, EN 55032:2012+AC:2013 RoHS ; EN 50581 :2012 (Richtlinie; Nummern : Ausgabedatum der referenzierten Dokumente I directive; number: date of issue of the referenced documents) Gem den Bestimmungen von: According to the requirements of: 2014/30/EU: Elektromagnetische Vertrglichkeit -EMV Richtline I Electromagnetic Compatibility (EMC) Oirective 2011 / 65/EU : RoHS Richtline I Restriction of the use of certain Hazardous Substances (RoHS) Oirective (falls zutreffend I i/ app/icab/e) Geschehen am: Ooneon: Berlin, 2017-11-22 verantwortliche Personen: responsible persons: e,L Matthias Nerlin Head of Business Unit page 1 / 1 / , _/ L //cc;;, L, Stefan G i m Draft 6.2 Federal Communications Commission (FCC) Statement Appendix Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

n Reorient or relocate the receiving antenna. n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. n Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

n This device may not cause harmful interference, and n This device must accept any interference received, including interference that may cause undesired operation. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 14 Draft Glossary and abbreviations Glossary and abbreviations 7 APC APS APS-M APS-RS CSV DHCP DNS FQDN FTP H.264 HAGL HDR HTML5 HTTP HTTPS IP address JSON Lux MAC address 18.06.2019 Automatic People Counter First generation people counter. Advanced People Sensor Second generation people sensor, successor of the APC APS for Mobile applications such as busses and trains. APS for Retail & Security and other stationary applications. Comma separated values File format where values are separated by commas. Those files can be imported into Microsoft Excel. Dynamic Host Configuration Protocol Protocol and service dynamically distributing network config-

uration parameters, such as IP address and servers. Domain Name System Resolves queries for FQDN host names into IP addresses Fully Qualified Domain Name Address of a device or server using DNS instead of an IP address File Transfer Protocol Protocol for data transfer; used for transferring the counting data registered by the APS Video compression standard. This is used by APS video storing and streaming. HELLA Aglaia High-Dynamic-Range imaging Technique used in imaging to reproduce a greater dynamic range of luminosity. Hypertext Markup Language, fifth revision Markup language used for structuring and presenting con-

tent on the World Wide Web since 2014. This is used by the user interface of the APS. Hypertext Transfer Protocol Application protocol for data transmissions in networks. HTTP is the basis for data communications in the World Wide Web. Hypertext Transfer Protocol Secure Application protocol for secure communication in networks Internet Protocol address Manually or dynamically assigned in the network JavaScript Object Notation Used by the APS REST interface. Unit of illuminance. Media Access Control address The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 15 Draft Glossary and abbreviations Unique hardware address of a network device. Message Queuing Telemetry Transport ISO standard 20922 publish-subscribe-based messaging protocol NT LAN Manager Security protocol for authentification at http proxy Network Time Protocol Protocol for the synchronization of time and date settings Optical Self Diagnosis Software function for checking the visual range Power over Ethernet Procedures for powering network devices over the eight-wire Ethernet cable Sending data from the APS to a data server (the connection is established by the APS) Remote Access Service Web service to remote access sensors Real Time Streaming Protocol Typically used for Video Streaming Simple Object Access Protocol Network protocol for exchanging data between systems and implementing remote procedure calls Transmission Control Protocol One of the core data transfer protocols of the Internet Pro-

tocol suite and with ordered data transfer User Datagram Protocol One of the core data transfer protocols of the Internet Pro-

tocol suite Universal Time Coordinated Coordinated Universal Time is the main time standard by which the world regulates clocks and time. Virtual Private Network Technology using the Internet to connect computers to iso-

lated remote computer networks that would otherwise be inaccessible Protocol providing full-duplex communication between web browsers and web servers. This is used by the web browser user interface of the device. Wireless-Fidelity Commercial name for wireless local area network. Wireless Local Area Network Wireless network typical at 2.4 or 5 gigahertz radio bands. Extensible Markup Language The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 16 MQTT NTLM NTP OSD PoE Push service RAS RTSP SOAP TCP UDP UTC VPN WebSocket WiFi or Wi-Fi WLAN XML 18.06.2019 Draft Glossary and abbreviations Defines a set of rules for encoding documents in a format that is both human-readable and machine-readable. XML has been employed as the base language for communica-

tion protocols. 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 17 Draft Index V Version Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 W Warranty information . . . . . . . . . . . . . . . . . . . . . . . 6 Waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Index 8 A Angle of view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 C Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 D Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 H Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 I Ingress Protection . . . . . . . . . . . . . . . . . . . . . . . . 10 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 L Limitation of liability . . . . . . . . . . . . . . . . . . . . . . . . 7 M Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 N Non intended use . . . . . . . . . . . . . . . . . . . . . . . . . 7 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 P People counting . . . . . . . . . . . . . . . . . . . . . . . . . . 5 People sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 R Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 S Safety information . . . . . . . . . . . . . . . . . . . . . . . . . 6 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . 7 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System integrator . . . . . . . . . . . . . . . . . . . . . . . . . 6 T Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 18.06.2019 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of patent, utility model or design. 18 Draft Draft 2 1

. 1 e r a w m r i F

, S P A

, 4 0

-

8 1 0 2

, 7 7 0 0 0

-

0 2 1

-

L G A H

, n i l r e B i l

, a a g A A L L E H 8 1 0 2 HELLA Aglaia Mobile Vision GmbH Ullsteinstrasse 140 12109 Berlin Germany Draft

HELLA Aglaia Mobile Vision GmbH - UllsteinstraBe 140 - 12109 Berlin Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

Hella Aglaia HELLA Aglaia Mobile Vision GmbH A member of the HELLA group UllsteinstraBe 140 12109 Berlin Tel. +49 (0) 30 2000 429 - 0 Fax + 49 (0) 30 2000 429 - 109 info@aglaia-gmbh.de www.aglaia-gmbh.de 6/5/2019 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ASWU-PS1 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Hella Aglaia Mobile Vision GmbH UllsteinstraRe 140 12109 Berlin Sincerely, info@aglaia-gmbh.de

, f, 2. Teby+49 (080 2000 429 - 0 A fr ASA ; i i

( AZ | Pex p49 (0X30 2000.429 - 109 Signature Lo Matthias Nerling Director People Sensing Hella Aglaia Mobile Vision GmbH HELLA Aglaia Mobile Vision GmbH - Deutsche Bank AG - IBAN DE 07 4167 0027 0609 8420 00 - BIC SWIFT: DEUTDE3B416 AG Berlin-Charlottenburg - HRB 66976 B - VAT-No. DE 194710861 - EORI No. DE 5106826 - Managing Director Kay Talmi

Hella Aglaia HELLA Aglaia Mobile Vision GmbH - UllsteinstraBe 140 - 12109 Berlin HELLA Aglaia Mobile Vision GmbH A member of the HELLA group Federal Communications Commission Equipment Authorization Branch visten sanern 7435 Oakland Mills Road Columbia, MD 21046 Tel. +49 (0) 30 2000 429 - 0 Fax +49 (0) 30 2000 429 - 109 info@aglaia-gmbh.de www.aglaia-gmbh.de 6/5/2019 Request for Permanent Confidentiality Company name: Hella Aglaia Mobile Vision GmbH FCC ID: 2ASWU-PS1 FCC Part 15 Certification Gentlemen, In accordance with CFR 47 0.457 and CFR 47 0.459 Hella Aglaia Mobile Vision GmbH hereby requests confidentiality of following attachments:

(1) schematic diagrams,

(2) detailed block diagrams,

(3) detailed operational descriptions,

(4) parts lists. These documents contain detailed system and equipment description and related information about the product which Hella Aglaia Mobile Vision GmbH considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Hella Aglaia Mobile Vision GmbH considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Hella Aglaia

' fo a Mobile Vision GmbH in 3 fo. F OO UlisteinstraRe 140 PVA |) eee 12109 Berlin Signature ; info@aglaia-gmbh.de Matthias Nerling Vi Tel.: +49 (0) 30 2000 429 - 0 f Director People Sensing \ Fax: +49 (0) 30 2000 429 - 109 Hella Aglaia Mobile Vision GmbH UlisteinstraRe 140 12109 Berlin / Germany HELLA Aglaia Mobile Vision GmbH - Deutsche Bank AG - IBAN DE 07 4167 0027 0609 8420 00 - BIC SWIFT: DEUTDE3B416 AG Berlin-Charlottenburg - HRB 66976 B - VAT-No. DE 194710861 - EORI No. DE 5106826 - Managing Director Kay Talmi

ModelName:APS180EIO FCCID:2ASWU-PS1 ExternalPhotos G0M19018012 ModelName:APS180EIO FCCID:2AS5KTSHW42 G0M19018012

ModelName:APS180EIO FCCID:2ASWU-PS1 InternalPhotos G0M19018012 ModelName:APS180EIO FCCID:2ASWU-PS1 G0M19018012