HELLA GmbH & Co. KGaA 59552 Lippstadt Hella FS14P71M Radio identification device FS14P71M 2017-12-21 New document Amend. Date Amend. No. Page Amendment
:
:
Replacement for version dated :
HELLA GmbH & Co. KGaA 59552 Lippstadt Hella FS14P71M 1 Device description This document is to describe the Hella FS14P71M radio identification devices for the North American market:
Device designation Buttons Button functions Customer label FS14P71M 4 lock, unlock, tailgate remote release, panic AUDI Table 1: Versions of Hella FS14P71M radio identification devices for the North American market 2 Application The above-mentioned devices are intended to allow the user to comfortably control the central locking status of a vehicle. This can be achieved by activation of the buttons described in the following picture. Furthermore, comfort to the user is enhanced to a great extent by passive entry and passive start functionality. Lock Unlock Tailgate unlock Panic Picture 1: Hella FS14P71M radio identification device The following functions are implemented:
By pressing the lock button, the vehicle will be locked. To unlock the vehicle, the unlock button shall be pressed. Activating the tailgate remote release button will open the trunk. The vehicle can be locked and unlocked in passive mode without the need to manually activate any button at the identification device. The engine can be started by pressing the vehicles start button. Activation of the identification device is acknowledged by flashing of the LED. HELLA GmbH & Co. KGaA 59552 Lippstadt Hella FS14P71M REGULATORY NOTICES FCC Warning Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation. IC Warning Canada Low-power license-exempt radio communication devices (RSSV210) a. Common information:
Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. a. Informations communes:
Fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositive ne peut causer des interfrences, et 2. Ce dispositive doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositive.