Description of Bluetooth control function 1. Basic parameters of Bluetooth controller:
Voltage Range: 8v-25v Working Current: 20MA-500mA Bluetooth receiver distance: about 7.2 m 2. Bluetooth controller main functions:
A, it has U disk, Flash, MIC input and control of light switch and other functions. B, button definition: power, forward, back, high and low speed, lights, songs, preschool 3. Control Function Operation Instructions:
A, power button, long press to control power on and off;
B, forward button, press forward light to light up, this is the forward state;
C, back button, press back light to light up, at this point, the state of retreat;
D, high-low speed button, press to switch between high and low speed indicator light, green light is low speed state, red light is high speed state;
E, light button, press the control light to turn on, then press the light flashing, then Press is to turn off the lights;
F, Song Button, Short Press Play Song Music, Press Play One, long press control volume increase;
G, Early Childhood Education Button, Short Press Play Early Childhood Education Music, press a box play one, long Press to control volume reduction;
4. Bluetooth connection method:
A, after turning on the power, the Bluetooth status indicator flashes and the Bluetooth function automatically turns on;
B, turn on the Bluetooth function of the phone in the settings and selection of the phone, search for the bluetooth ofHonghui, manually click on the pair connection;
C, the Bluetooth indicator on the Bluetooth controller is always on, indicating that the Bluetooth connection has been successful. Then you can play music on your phone via Bluetooth FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
