FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any Col aT Ti- Tal nT elm Ur TSUS This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC ID:2ASWS-1001 SHQY 34 >)
> Product Status Description When the car or ACC power is turned on every time, the product will power on and detect automatically, and the green light(power button) will be on; The orange and blue lights will flash alternately twice
(buzzer beep), indicating that the product self-test is successful and enters standby status. Put the mobile phone which conforms the QI standard into the wireless charging area, the product will automatically detect the connecting, start charging or accelerate charging (the blue light is always on), after fully charged, the blue light will be out, and enter into standby status, the product will induct the mobile phone's power consumption automatically and start charging at any time. When the product detects that there is metal, IC card and other objects in the charging area or the position of the charging mobile phone is offset and lead to unstable connecting, the buzzer will alert 5 times (beep...), and the orange light will keep flashing, then the product FOD will start the protection program automatically.
> Frequently Asked Question Power button The car or ACC power is | Start the car, or ACC power supply indicator is not not activated, power Turn on the product power switch, bright button is not turned on check the 12V power plug and the host power supply DC port Remove the objects, such as metal, IC card and etc. in the charging area The power indicator is on, the fault orange light is always flashing, and the buzzer is alerted. FOD start, the product enters the automatic protection program Restart after power off 4-5 minutes The phone is not charging, the blue light is always on Unstable voltage, current, and high temperature Restart after power off 4-5 minutes
>> Precaution The product can be used between the optimal temperature of -2 degrees Celsius and 35 degrees Celsius. When charging, the charging area and phone will have fever phenomenon, it is a normal and safe situation. The product is designed with air cooling&heat dissipation, and high temperature protection program, please rest assured to use!
NCU ACLU LN Aer Lae, Username Date of purchase Telephone number. User address Three Guarantees Service: The quality problem to lead to product can not be used, from the date of purchase, it can be returned/exchanged or repaired within 7 days, it can be exchanged or repaired within 90 days, and free product maintenance within one year (Except man-made damage). If the warranty period expires, the maintenance service will charge some appropriate parts and labor costs, and the after-sales service can contact purchase dealer.
> Certificate of Approval Certificate of Approval This product has passed the inspection and is approved for delivery Production Date Inspector. Product Standard: GB 4943.1-2011
) FAST CHARGER CAA Ne CHARGER pu @ A
(a) {3 | lev) Dd) |@
A Tce Intelligent Car gauge Nal) ate) al PE Ce ila) charging chip design arg CTU CEST Ely aE