FCC ID: Q9DAPIN0534535 802.11ax Campus Access Point

PART NUMBER BLOCK PART NUMBER REV WNC CONFIDENTIAL REVISIONS REV DESCRIPTION DATE APPROVED C2.83

*2.15

//Model: APIN0534

//Rated Input: 48V 0.75A, 57V 950mA (PoE) IC: 4675A-APIN0534535 FCC ID: Q9DAPIN0534535 CAN ICES-3 (A)/NMB-3(A) 9

. 1

*

R0.2,5PLS 5 1

. 0 9

. 0 4

*

NOTE:

1. MATERIAL: WHITE MATTE PET, HTYL75(EB) T=0.075 ADHESIVE: ACRYLIC 2. FINISH: FINISH: PET,TPATM(T)(30)J ,T=0.025 3. COLOR: PMS BLACK C PMS GRAY 3C

: ,R=0.2 4. UL APPROVED, PGDQ2. 5.:

6.TEMPERATURE RESISTANT= 120 C 7.:30mm0.2mm,30~120mm0.3mm,120~315mm0.5mm,3150.8mm 8. ,30.5mm, 30.3mm 9.TEST REQUIREMENTS TEST ITEM TEST SPEC TEST CONDITION CRITERIA T D190033003 020-190027 W52/53: Indoor use only 4012596-01

*59.90.15 1 ISO Class.: 1 ASTM Class.: 4 B ASTM D3359-02/ ISO 2409:2007 Detachment of small flakes of the coating at the intersections of the cuts. A cross-cut area not significantly greater than 5% is affected. SEE NOTES SEE NOTES RVAQ-52E 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Tel: 886-3-6667799 Fax: 886-3-5788726 DWG TITLE DWG NO. SIZE A4A4 SCALE LABEL,AP-534,4012596-01,RVAQ-52E REV 1/1 SHEET 1 OF 1

PART NUMBER BLOCK PART NUMBER REV WNC CONFIDENTIAL REVISIONS REV DESCRIPTION DATE APPROVED C2.83

*2.15

//Model: APIN0535

//Rated Input: 48V 0.75A, 57V 950mA (PoE) IC: 4675A-APIN0534535 FCC ID: Q9DAPIN0534535 CAN ICES-3 (A)/NMB-3(A) 9

. 1

*

R0.2,5PLS 5 1

. 0 9

. 0 4

*

NOTE:

1. MATERIAL: WHITE MATTE PET, HTYL75(EB) T=0.075 ADHESIVE: ACRYLIC 2. FINISH: FINISH: PET,TPATM(T)(30)J ,T=0.025 3. COLOR: PMS BLACK C PMS GRAY 3C

: ,R=0.2 4. UL APPROVED, PGDQ2. 5.:

6.TEMPERATURE RESISTANT= 120 C 7.:30mm0.2mm,30~120mm0.3mm,120~315mm0.5mm,3150.8mm 8. ,30.5mm, 30.3mm 9.TEST REQUIREMENTS TEST ITEM TEST SPEC TEST CONDITION CRITERIA T D190033003 020-190027 W52/53: Indoor use only 4012597-01

*59.90.15 1 ISO Class.: 1 ASTM Class.: 4 B ASTM D3359-02/ ISO 2409:2007 Detachment of small flakes of the coating at the intersections of the cuts. A cross-cut area not significantly greater than 5% is affected. SEE NOTES SEE NOTES RVAQ-52I 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. Tel: 886-3-6667799 Fax: 886-3-5788726 DWG TITLE DWG NO. SIZE A4A4 SCALE LABEL,4012597-01, AP-535, RVAQ-52I REV 1/1 SHEET 1 OF 1

National Technical Systems Silicon Valley TCB 41039 Boyce Road Fremont, CA. 94538 October 20, 2021 Gentlemen:

This is your letter of authorization to accept our appointment of National Technical Systems Silicon Valley as our Agent for Hewlett Packard Enterprise Company, 3333 Scott Blvd, Santa Clara CA, 94054, to sign applications before National Technical Systems Silicon Valley TCB and to make representations to you on our behalf. National Technical Systems Silicon Valley is to receive and exchange data between our company and National Technical Systems Silicon Valley TCB. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC and Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by National Technical Systems Silicon Valley TCB, still resides with {your company name}. I hereby certify on behalf of Hewlett Packard Enterprise Company ("Applicant") that neither Applicant nor any party to the application (officers, directors, and 5%

shareholders) is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988 21 U.S.C. 853a. Sincerely, Phillip Carranco Regulatory Compliance Manager

FCC SDR Class III Permissive Change Declaration Date: October 19, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: APIN0534 and APIN0535 FCC ID: Q9DAPIN0534535 Regarding the requirements for class III permissive changes identified in the SDR application guide (KDB 442812 D01 SDR Apps Guide v01), the following information must be provided when performing a Class III permissive change. We would like to add a ZeroWait DFS feature to the previously certified devices. There has been no change to the hardware. There has been no changes to the original Software Distribution and Security procedure. Original Firmware Version: ArubaOS 8.5.0.0 Build 68522 (granted 4/22/2019) 1st C3PC: ArubaOS 8.5.0.0 Build: 69661 (granted 9/4/2019) 2nd C3PC: ArubaOS 8.7.0.0 Build: 73451 (granted 8/6/2020) This C3PC: ArubaOS 8.9.0.0 Build: 80733 Phillip Carranco Name:

Title:

Signature of applicant APIN053x_FCC_C3P3_Request Manager, Regulatory Compliance

Request for Confidentiality Date: _October 19, 2021_______ Subject: Confidentiality Request for: ______Q9DAPIN0534535______ Pursuant to FCC 47 CFR 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Permanent Exhibit Operation Description/Theory of Operation ______ Hewlett Packard Enterprise______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, ___ By:

(Signature/Title1)

(Print name) ________Phillip Caranco; Manager Regulatory Compliance 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Authority to Act as Agent Date: _June 22, 2020_______ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

David Bare of National Technical Systems is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____12 months_____ __Phillip Carranco_______________

(Print name) __

(Signature1) _____________ __Manager, Regulatory Compliance________________________ By:

Title:

On behalf of: ___Hewlett Packard Enterprise Company_______________________ Telephone:

_+1-650-236-9490___________________

(Company Name)

FCC SDR Class III Permissive Change Declaration Date: June 26, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: APIN0534 and APIN0535 FCC ID: Q9DAPIN0534535 Regarding the requirements for class III permissive changes identified in the SDR application guide (KDB 442812 D01 SDR Apps Guide v01), the following information must be provided when performing a Class III permissive change. We would like to add 160MHz operation to our existing approvals. There are no hardware changes implemented on this device, only via Aruba Networks controlled Software new DFS bands will be enabled. There has been no changes to the original Software Distribution and Security procedure. Original Firmware Version: ArubaOS 8.5.0.0 Build 68522 (granted 4/22/2019) 1st C3PC: ArubaOS 8.5.0.0 Build: 69661 (granted 9/4/2019) This C3PC: ArubaOS 8.7.0.0 Build: 73451 Phillip Carranco Name:

Title:

Signature of applicant Manager, Regulatory Compliance APIN053x_FCC SDR Class III Permissive Change Declaration

Authority to Act as Agent Date: April 11, 2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

David Bare of National Technical Systems is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 12 months)_____ By:

Title:

On behalf of: Hewlett Packard Enterprise Telephone:

__________________________ Robert Hastings

(Print name) Manager Regulatory Compliance

(Company Name)

(650) 236-9611

(Signature1) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11 Request for Confidentiality Date: April Subject: Confidentiality Request for: Q9DAPIN0534535, 4675A-APIN0534535 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested

Short Term

Short Term

Short Term

Permanent

Permanent *2

Short Term

Permanent

Short Term

Short Term

Short Term

Short Term

Short Term

Permanent

Permanent

Permanent

Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation

(including Output Power and Zigbee Duty Cycle Attestations Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Hewlett Packard Enterprise, has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

Robert Hastings; Manager Regulatory Compliance __________________________

(Signature/Title3)

(Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022818 11

Output Power Attestation Date: April 5, 2019 FCC ID: Q9DAPIN0534535 IC ID: 4675A-APIN0534535 TCB:

Hewlett Packard Enterprise (Aruba Networks), declare that the conducted power is calculated based on a maximum EIRP value coded into the software (not changeable by the user) and the antenna configured by the installer (or a fixed value for the internal antenna variant). The maximum allowed EIRP value is derived from the results using the antenna with the lowest gain, which yields the highest conducted power. For antennas with higher gain, the conducted power is adjusted downward to ensure that the maximum allowed EIRP is not exceeded. Name:

Title:

Signature of applicant Manager, Regulatory Compliance Robert Hastings APIN053x_OutputPower_Attestation.docx

Professional installation attestation Date: April 4, 2019 FCC ID: Q9DAPIN0534535 IC ID: 4675A-APIN0534535 TCB:

Hewlett Packard Enterprise (Aruba Networks), declare that the above reference product is professionally installed. The APIN0534 and APIN0535 are intended for enterprise level installations. HPE supports direct sales to large customers and sales via value-added resellers/distributors. There are no retail or mail order sales channels. In all cases, installation is performed by a trained installer. Aruba provides a certified training program. The complexity of the ArubaOS makes training a requirement for installation and operation. Without training, a user would not be able to perform the initial configuration that would enable transmission of the access points. It is during the initial provisioning of any APs that the There is a specific ordering guide that provides a list of acceptable antennas for a particular access point. This is referenced in the Installation Guide. Name:

Title:

Signature of applicant Manager, Regulatory Compliance Robert Hastings APIN053x_Professional Installation Attestation.docx

-----------------------------------------------------------------------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------------------------------------------------------------------------------

ZigBee Duty Cycle attestation Date: April 10, 2019 FCC ID: Q9DAPIN0534535 IC ID: 4675A-APIN0534535 TCB:

Hewlett Packard Enterprise (Aruba Networks), declare that the ZigBee operation, when implemented, will be limited to a duty cycle of 10% or less in any 100ms period. This will not be user configurable. Name:

Title:

Signature of applicant Manager, Regulatory Compliance Robert Hastings APIN053x_Zigbee_DutyCycle_Attestation.docx