FCC ID: Q9DAPEX0674579 ACCESS POINT

/Product Name: HPE ANW AP-670 Series Access Points/ /

/Model: APEX0674 FCC ID: Q9DAPEX0674579 IC: 4675A-APEX0674579 CAN ICES-3 (B)/NMB-3(B) T D 23 0138 201 201-230671 W52/53: Indoor use only R 2.0mm,4PLS IP66/IP67 32mm R-R-HPe-APEX0674579 HPE, Postfach 0001,1122 Wien, Austria SN:

XXXXXXXXXXXXXX MAC:

XXXXXXXXXXXX 4013288-01 135mm LABEL,BASE AGENCY, AP-674 4013288 01 AP674 LABEL COO Label 31.75*12.7MM DOM/20191226

Made in China Hecho en China Removable,SN/MAC/BLE 60*20MM HPE model name model name 31.75*6.35MM BLE MAC AP-575-US RXXXXX XXXXXXX AP-XXX BLE MAC:XXXXXX BLE MAC:XXXXXXXX SN:

XXXXXXXXXXXXXX MAC:

XXXXXXXXXXXX BLE MAC:XXXXXXXX REMOVE THIS ENTIRE LABEL USE AS NEEDED. Agency label suggested maximum size 135*32mm MAC:

X X X X X X X X X X XX S/N:

X X X X X X X X X X XX S/N (31.75*6.35MM) MAC (31.75*6.35MM)

R 2.0mm,4PLS IP66/IP67

/ /Product Name: HPE ANW AP-670 Series Access Points/

/ /Model: APEX0675 FCC ID: Q9DAPEX0674579 IC: 4675A-APEX0674579 CAN ICES-3 (B)/NMB-3(B) T D 23 0138 201 201-230671 W52/53: Indoor use only R-R-HPe-APEX0674579 60mm HPE, Postfach 0001,1122 Wien, Austria 4013289-01 35mm LABEL,BASE AGENCY, AP-675 4013289 01 Warranty label COO Label 31.75*12.7MM S/N (31.75*6.35MM) MAC (31.75*6.35MM) BLE MAC 31.75*6.35MM HPE model name 31.75*6.35MM model name 31.75*6.35MM DOM/20191226

Made in China Hecho en China S/N:

X X X X X X X X X X XX MAC:

X X X X X X X X X X XX BLE MAC:XXXXXX BLE MAC:XXXXXXXX AP-575-US RXXXXX XXXXXXX AP-XXX agency label 60*35mm Removable,SN/MAC/BLE 60*20MM

. D E D E E N S A E S U I S H T E V O M E R L E B A L E R T N E I X X X X X X X X X X X X X X

N S X X X X X X X X X X X X

C A M X X X X X X X X

C A M E L B label 45*58mm Conforms to UL STDs 62368-1 & 121201 Certified to CSA STDs #62368-1 & C22.2 No.213 Class I Division 2, Groups A, B, C and D,T4 Ambient Temperature -40 C to +65 C WARNING DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT WARNING DO NOT CONNECT OR DISCONNECT WHEN ENERGIZED WARNING POTENTIAL ELECTROSTATIC CHARGING HAZARD SEE INSTRUCTIONS TV 21 ATEX 8711 X, IECEx TUR 21.0041X Hewlett Packard Enterprise (China) Co., Ltd. 3rd floor, podium building Pacific Century Place 2A Gong Ti N. Rd. Chaoyang District 100027 Beijing Peoples Republic of China Class I, Division 2, Group ABCD T4 Class II, Division 2, Group EFG T80C Class III, Division 2, T80C II 3 G Ex ec IIC T4 Gc The maximum Service temperature is 78.6C at the entry point MC 301663 4013309-01

50.0 +0.0

-0.2 R 1.0mm,4PLS

/ /Product Name: HPE ANW AP-670 Series Access Points/ /

/ /Model: APEX0677 FCC ID: Q9DAPEX0674579 IC: 4675A-APEX0674579 CAN ICES-3 (B)/NMB-3(B)

. 0 0

. 2 0

. 0 9 2 HPE, Postfach 0001,1122 Wien, Austria 4013290-01 LABEL,BASE AGENCY L, AP-677 4013290 01 SN:

XX XX XX XX XXX XXX MAC:

XX XX XX XX XXXX BL E MAC:XXX XX XX X REMOVE THIS ENTIRE LABEL USE AS NEEDED. Removable,SN/MAC/BLE 60*20MM Agency label 50*29mm Agency label 50*29mm COO Label 31.75*12.7MM DOM/20191226

Made in China Hecho en China MAC (31.75*6.35MM) MAC:

X X X X X X X X X X XX S/N (31.75*6.35MM) S/N:

X X X X X X X X X X XX B L E M A C: X X XX X X BLE MAC:XXXXXXXX A P- 5 7 5 - U S RXXXXX X XX X X XX A P- X X X BLE MAC

(31.75*6.35MM) HPE model name model name

(31.75*6.35MM)

(31.75*6.35MM) label 45*58mm Conforms to UL STDs 62368-1 & 121201 Certified to CSA STDs #62368-1 & C22.2 No.213 Class I Division 2, Groups A, B, C and D,T4 Ambient Temperature -40 C to +65 C WARNING DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT WARNING DO NOT CONNECT OR DISCONNECT WHEN ENERGIZED WARNING POTENTIAL ELECTROSTATIC CHARGING HAZARD SEE INSTRUCTIONS TV 21 ATEX 8711 X, IECEx TUR 21.0041X Hewlett Packard Enterprise (China) Co., Ltd. 3rd floor, podium building Pacific Century Place 2A Gong Ti N. Rd. Chaoyang District 100027 Beijing Peoples Republic of China Class I, Division 2, Group ABCD T4 Class II, Division 2, Group EFG T80C Class III, Division 2, T80C II 3 G Ex ec IIC T4 Gc The maximum Service temperature is 78.6C at the entry point MC 301663 4013309-01

50.0 +0.0

-0.2 R 1.0mm,4PLS

/ /Product Name: HPE ANW AP-670 Series Access Points/ /

/ /Model: APEX0679 FCC ID: Q9DAPEX0674579 IC: 4675A-APEX0674579 CAN ICES-3 (B)/NMB-3(B)

. 0 0

. 2 0

. 0 9 2 HPE, Postfach 0001,1122 Wien, Austria 4013291-01 LABEL,BASE AGENCY L, AP-679 4013291 01 SN:

XX XX XX XX XXX XXX MAC:

XX XX XX XX XXXX BL E MAC:XXX XX XX X REMOVE THIS ENTIRE LABEL USE AS NEEDED. Removable,SN/MAC/BLE 60*20MM Agency label 50*29mm Agency label 50*29mm COO Label 31.75*12.7MM DOM/20191226

Made in China Hecho en China MAC (31.75*6.35MM) MAC:

X X X X X X X X X X XX S/N (31.75*6.35MM) S/N:

X X X X X X X X X X XX B L E M A C: X X XX X X BLE MAC:XXXXXXXX A P- 5 7 5 - U S RXXXXX X XX X X XX A P- X X X BLE MAC

(31.75*6.35MM) HPE model name model name

(31.75*6.35MM)

(31.75*6.35MM) label 45*58mm Conforms to UL STDs 62368-1 & 121201 Certified to CSA STDs #62368-1 & C22.2 No.213 Class I Division 2, Groups A, B, C and D,T4 Ambient Temperature -40 C to +65 C WARNING DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT WARNING DO NOT CONNECT OR DISCONNECT WHEN ENERGIZED WARNING POTENTIAL ELECTROSTATIC CHARGING HAZARD SEE INSTRUCTIONS TV 21 ATEX 8711 X, IECEx TUR 21.0041X Hewlett Packard Enterprise (China) Co., Ltd. 3rd floor, podium building Pacific Century Place 2A Gong Ti N. Rd. Chaoyang District 100027 Beijing Peoples Republic of China Class I, Division 2, Group ABCD T4 Class II, Division 2, Group EFG T80C Class III, Division 2, T80C II 3 G Ex ec IIC T4 Gc The maximum Service temperature is 78.6C at the entry point MC 301663 4013309-01

Date: 15-Dec-2023 Declaration letter Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company FCC ID: Q9DAPEX0674579 IC: 4675A-APEX0674579 To Whom It May Concern:

mhill@hpe.com

+1 408 8070476 Office TCB:

For our business issue and marketing requirement, we would like to list different model number as following:

Model No.: APEX0674, APEX0675, APEX0677, APEX0679 APEX0674 supports external antennas. APEX0675, APEX0677 and APEX0679 support internal antennas. APEX0677 and APEX0679 have difference antennas and their enclosure are the same. Their layout of motherboard is the same. Only a little different in BOM because of different antennas. Detail refer to EUT photo. Sign by:

6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 2 Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 2 of 2

Date: 15-Dec-2023 ZigBee Duty Cycle Attestation Federal Communications Commission Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company 7435 Oakland Mills Road Columbia MD 21046 mhill@hpe.com

+1 408 8070476 Office FCC ID: Q9DAPEX0674579 To Whom It May Concern:

TCB:

Hewlett Packard Enterprise (Aruba Networks), declare that the ZigBee operation, when implemented, will be limited to a duty cycle of 10% or less in any 100ms period. This will not be user configurable. Best Regards, Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 1

Date: 15-Dec-2023 DECLARATION OF CONFORMITY Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office FCC ID: Q9DAPEX0674579 Please be notified that we, the undersigned, Hewlett Packard Enterprise Company declares that the product which bears the above FCC ID is also compliant with the FCC requirements for Suppliers Declaration of Conformity(SDoC). And the SDoC procedure shall be carried out prior to marketing the device in the US. Sincerely,

Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 1

Date: 15-Dec-2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(5) Attestation FCC ID: Q9DAPEX0674579 1. Hewlett Packard Enterprise Company (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Hewlett Packard Enterprise Company (the applicant) 2. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408-807-0476 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Date: 15-Dec-2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize MRT Technology (Suzhou) Co., Ltd to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by MRT Technology (Suzhou) Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MRT Technology (Suzhou) Co., Ltd as our representative, we still recognize that we are responsible to:

a) b) c) d) e) f) g) h) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 2 i) j) k) keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

document the actions taken. Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company This authorization is valid until further written notice from the applicant. mhill@hpe.com

+1 408 8070476 Office Sincerely Yours, Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 2 of 2

Date: 15-Dec-2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID: Q9DAPEX0674579 FCC FRN: 0026486175 To whom it may concern:

Hewlett Packard Enterprise Company (the applicant) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID: Q9DAPEX0674579 The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA mhill@hpe.com Sincerely yours, Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408-807-0476 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Date: 15-Dec-2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: Q9DAPEX0674579 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Software Security Requirements Cover Letter Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (180 days):

External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 2 Best Regards, Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 2 of 2

Date: 15-Dec-2023 Professional Installation Attestation FCC ID: Q9DAPEX0674579 IC: 4675A-APEX0674579 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company TCB:

mhill@hpe.com

+1 408 8070476 Office Hewlett Packard Enterprise Company, declare that the above reference product is professionally installed. The APEX0674 / APEX0675 / APEX0677 / APEX0679 are intended for enterprise level installations. HPE supports direct sales to large customers and sales via value-added resellers/distributors. There are no retail or mail order sales channels. In all cases, installation is performed by a trained installer. Aruba provides a certified training program. The complexity of the Aruba OS makes training a requirement for installation and operation. Without training, a user would not be able to perform the initial configuration that would enable transmission of the access points. It is during the initial provisioning of any APs that the There is a specific ordering guide that provides a list of acceptable antennas for a particular access point. This is referenced in the Installation Guide. Sign by:

Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 1