app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2024-08-26
|
1 2 3
|
Applicant's complete, legal business name |
Hewlett Packard Enterprise Company
|
1 2 3
|
FCC Registration Number (FRN) |
0026486175
|
1 2 3
|
Physical Address |
6280 America Center Drive
|
1 2 3
|
San Jose, California 95002
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
Q9D
|
1 2 3
|
Equipment Product Code |
APIN0755
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
M******** H******
|
1 2 3
|
Title |
Principal Engineer
|
1 2 3
|
Telephone Number |
650-2********
|
1 2 3
|
Fax Number |
408-2********
|
1 2 3
|
E-mail |
m******@hpe.com
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
MRT Technology (Suzhou) Co., Ltd
|
1 2 3
|
Name |
R****** W****
|
1 2 3
|
Physical Address |
D8 Building, Youxin Industrial Park
|
1 2 3
|
Suzhou, 215104
|
1 2 3
|
China
|
1 2 3
|
Telephone Number |
86-51******** Extension:
|
1 2 3
|
Fax Number |
0512-********
|
1 2 3
|
E-mail |
r******@mrt-cert.com
|
|
app
s
|
Non Technical Contact
|
1 2 3
|
Firm Name |
MRT Technology (Suzhou) Co., Ltd
|
1 2 3
|
Name |
R**** W******
|
1 2 3
|
Physical Address |
D8 Building, Youxin Industrial Park
|
1 2 3
|
Suzhou, 215104
|
1 2 3
|
China
|
1 2 3
|
Telephone Number |
0512-******** Extension:
|
1 2 3
|
Fax Number |
86-51********
|
1 2 3
|
E-mail |
r******@mrt-cert.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/22/2025 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | Yes |
1 2 3 | Equipment Class | 6ID - 15E 6 GHz Low Power Indoor Access Point |
1 2 3 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | ACCESS POINT |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 | Modular Equipment Type | Does not apply |
1 2 3 | Purpose / Application is for | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Output power listed is EIRP. Device is a 802.11 ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes in 6 GHz WLAN transmitter and it also contains BLE, Zigbee, 2.4GHz WLAN and 5GHz WLAN transmitters. 6GHz operation is intended for indoor use only. |
1 2 3 | Output power listed is conducted for UNII band 1/2A/2C/3 and EIRP for UNII band 4. Device is a 802.11 a/n/ac/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE, Zigbee, 2.4GHz WLAN and 6GHz WLAN transmitters. |
1 2 3 | Output power listed is conducted. Device is a 802.11 b/g/n/ax/be device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 22 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz WLAN and 6GHz WLAN transmitters. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
MRT Technology (Suzhou) Co., Ltd.
|
1 2 3
|
Name |
M**** C******
|
1 2 3
|
Telephone Number |
86512******** Extension:
|
1 2 3
|
E-mail |
m******@mrt-cert.com
|
|