FCC ID: Q9DASIN0305 HPE Aruba User Experience Sensor

1 2 WNC CONFIDENTIAL ZONE 1 RELEASE 08/03/23 SANDY CHEN A 3 3 R3.25,4PLS R3.25,4PLS 10

. 5 0 5 1

. 5 5 2 2 3 3

*2

*2 4 4 6 6 3 3 6 6

. 5 5 8 8 5 ,T 5 ,T H H R. R. 5 5 7 7 4 4

. 7 7 6 6 9.8 9.8 10.37 10.37

*1

*1 110.75 110.75 DIELINES 9 1.70.5 11 7.68 6 2.29 0.5 12

. 5 0 9 6 3

. 13

(25.6)

(41.5) Model:ASIN0305 FCC ID:Q9DASIN0305 IC:4675A-ASIN0305 CAN ICES-3 (B)/NMB-3 (B) S0U51A YYYYMMDD CN SN:CCDDBBBZZZ PN: UX-G6E MAC(E):XX:XX:XX:XX:XX:XX MAC(W):XX:XX:XX:XX:XX:XX T D 23 0108 201 201-230477 R-R-HPe-ASIN0305306 W52/53,6GHz: Indoor use only HPE,Postfach 0001,1122 Wien,Austria 4013269-01

(R 10.7)

, LABEL FORM SN

) 7 4

. 5

) 5

. 1 2

0.2 2 A B CATHY CHEN CATHY CHEN SANDY CHEN 08/03/23 08/03/23 08/03/23 LABEL,4013269-01,4013270-01,AGENCY LABEL,RVPM-A3 A3 4L.RVPMA.00D01 1 NOTES:

1. MATERIAL: WHITE PET, t=0.05 ,HTYL50(EB) ADHESIVE: , t=0.035mm FINISH: PET,T=0.025mm,TPATM(T)(30)J 2. COLOR:

a. BACKGROUND b. PMS BLACK C B PMS COOL GRAY 2 C c.DIELINES ,. 3. ,30.5mm, 30.3mm 4. TEMPERATURE RESISTANT= 120C. 5. :

6.:30mm~120mm0.3mm,120~315mm0.5mm,3150.8mm 7.UL APPROVED, PGJI2,CM-100-KPTRICOH B110C,B110CR,B110CW 8.TEST REQUIREMENTS OR OTHER EQUIVALENT TEST METHOD TEST ITEM TEST SPEC TEST CONDITION ISO Class.: 1 ASTM Class.: 4 B 1 ASTM D3359-02/ ISO 2409:2007 CRITERIA Detachment of small flakes of the coating at the intersections of the cuts. A cross-cut area not significantly greater than 5% is affected. 9.BLACK & GRAY COLORED ITEMS ARE PRINTED AT VENDOR,RED COLORED ITEMS ARE PRINTED AT WNC.

Request Letter Subject:

Reuse the test data of authorized equipment Applicant: Hewlett Packard Enterprise Dear Sirs, This is to request for reference the test data of authorized device (FCC ID: Q9DASIN0306, Original Grant Date:

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company 12/11/2023). mhill@hpe.com

+1 408 8070476 Office For new device (FCC ID: Q9DASIN0305, M/N: ASIN0305), their differences are as follows. Parts of Product Modification PCB Others Remove LTE/GPS module and its antenna & Remove the super-capacitor No Change According to the declaration above, this new device will reuse the test data of the original device. Spot checks were performed according to KDB 484596 D01v02, details of reuse data refer to table as below. Frequency and Part Rules 5180~5320MHz, 5500~5825MHz, FCC 15.407 2402~2480MHz, FCC 15.247 Test Items Original report No. New report No. Spot check message Occupied Bandwidth Output Power Transmit Power Control Peak Power Spectral Density Radiated Spurious Emission and Band Edge AC Conducted Emissions 150kHz -

30MHz 2306RSU027-U4 2306RSU027-U14 Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing with spot check Data Referencing DFS 2306RSU027-U10 2306RSU027-U18 Data Referencing Occupied Bandwidth Output Power Power Spectral Density Band Edge / Out-of-

Band Emissions Radiated Spurious Emission and Band Edge 2306RSU027-U1 2306RSU027-U11 Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing with spot check Page 1 of 3 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com AC Conducted Emissions 150kHz -

30MHz Occupied Bandwidth Output Power Power Spectral Density Band Edge / Out-of-

Band Emissions Radiated Spurious Emission and Band Edge AC Conducted Emissions 150kHz -

30MHz 26dB Bandwidth Occupied Bandwidth Output Power Peak Power Spectral Density Radiated Spurious Emission and Band Edge AC Conducted Emissions 150kHz -

30MHz 6dB Bandwidth Output Power Power Spectral Density Band Edge / Out-of-

Band Emissions Radiated Spurious Emission and Band Edge AC Conducted Emissions 150kHz -

30MHz Occupied Bandwidth In-Band Emission Frequency Stability Contention-Based Protocol Maximum Equivalent 2306RSU027-U2 2306RSU027-U12 2306RSU027-U5 2306RSU027-U15 2306RSU027-U3 2306RSU027-U13 2306RSU027-U6 2306RSU027-U16 Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing with spot check Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing with spot check Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing with spot check Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing Data Referencing Page 2 of 3 2405~2475MHz, FCC 15.247 Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office 5845~5885MHz, FCC 15.407 2412~2462MHz, Part 15.247 5955~7095MHz, FCC 15.407 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Isotopically Radiated Power Peak Power Spectral Density (E.I.R.P) Unwanted Emissions General Field Strength (Restricted Bands and Radiated Emission) AC Conducted Emissions 150kHz -

30MHz Data Referencing Data Referencing Data Referencing with spot check Data Referencing If you have any questions regarding this application, please feel free to contact me. Sincerely, Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 2023-12-16 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 3 of 3

Date: 09-Aug-2023 DECLARATION OF CONFORMITY Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office FCC ID: Q9DASIN0305 Please be notified that we, the undersigned, Hewlett Packard Enterprise Company declares that the product which bears the above FCC ID is also compliant with the FCC requirements for Suppliers Declaration of Conformity(SDoC). And the SDoC procedure shall be carried out prior to marketing the device in the US. Sincerely, Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 1

Date: 09-Aug-2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(5) Attestation FCC ID: Q9DASIN0305 Hewlett Packard Enterprise Company (the applicant) certifies 1. that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Hewlett Packard Enterprise Company (the applicant) certifies 2. that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408-807-0476 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Date: 09-Aug-2023 RE: FCC Application for FCC ID: Q9DASIN0305 Subject: KDB 987594 6GHz Declaration FCC, We, Hewlett Packard Enterprise Company, attest that this device under FCC ID: Q9DASIN0305 complies with device protocol requirements and operational restrictions: for client device. 15E 6 GHz Low Power Dual Client 6CD:

1. Device Protocol Attestation Statement:

a. That this device will only associate and connect with a low-power indoor Access Point, subordinate device, or standard access point and never directly link to any other client devices. b. Statement that this device will always initiate transmission under the control of a low-power indoor AP, subordinate or standard client except for brief communications before joining a network. These quick messages will only occur if the client has detected an indoor AP, subordinate, or standard access point operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. c. Statement that this device, when associated and connected with a low-power indoor access point, subordinate or standard access point device, will operate at a power lower as advertised by the indoor access point, subordinate, or standard access point (at some point in time testing will be required but FCC will provide advance notice before the requirement takes affect):

i. lower or equal to the power advertised by the low-power indoor access point or subordinate and never above the maximum output power allowed by the FCC grant for clients associated with indoor clients or subordinates. ii. lower than or 6 dB below the power advertised by the standard access point. d. Statement for modules only: Contention-based protocol as demonstrated in the test report is permanently embedded in the module and is not host-dependent based protocol demonstrated in the test report. 2. Statement acknowledging device restrictions: a. Prohibited for control of or communications with unmanned aircraft systems, including drones. Sign by:

Print Name: Mark Hill Title: Regulatory Compliance Engineer Company: Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 1

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Date: 09-Aug-2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize MRT Technology (Suzhou) Co., Ltd to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by MRT Technology (Suzhou) Co., Ltd on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MRT Technology (Suzhou) Co., Ltd as our representative, we still recognize that we are responsible to:

a) b) c) d) e) f) g) h) i) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available when requested;

6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 2 j) k) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

document the actions taken. This authorization is valid until further written notice from the applicant. Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company Sincerely Yours, mhill@hpe.com

+1 408 8070476 Office Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 2 of 2

Date: 09-Aug-2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID: Q9DASIN0305 To whom it may concern:

Hewlett Packard Enterprise Company (the applicant) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. Q9DASIN0305. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. Mark Hill Hewlett Packard Enterprise Company FCC FRN: 0009155128 6280 America Center Dr, San Jose, CA 95002 USA mhill@hpe.com Sincerely yours, Mark Hill Hewlett Packard Enterprise Company 6280 America Center Dr, San Jose, CA 95002 USA Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408-807-0476 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Date: 09-Aug-2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: Q9DASIN0305 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Software Security Requirements Cover Letter Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (180 days):

External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 2 Best Regards, Name: Mark Hill Position: Regulatory Compliance Engineer Hewlett Packard Enterprise Company Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 2 of 2

Mark Hill Regulatory Compliance Engineer Hewlett Packard Enterprise Company mhill@hpe.com

+1 408 8070476 Office Date: 09-Aug-2023 RE: FCC Application for FCC ID: Q9DASIN0305 Subject: KDB 291074 D02v01 5.9GHz Declaration FCC, We, Hewlett Packard Enterprise Company, attest that this device under FCC ID: Q9DASIN0305 complies with device protocol requirements and operational restrictions: for client device. Client Device:

1. Client device (EUT) will not directly connect to another client device. 2. Client device (EUT) will only associate and connect with an indoor Access Point (AP) or indoor Subordinate. 3. Client device (EUT) will always be under the control of an indoor AP. However, there may exist situations where the client may transmit brief messages, prior to being under the control of an AP, to join an AP network. But these brief messages will only occur if the client has detected a signal confirming that an AP is operating on a particular channel. These brief messages will have a time-out mechanism if the client does not receive a response from an AP. Sign by:

Print Name: Mark Hill Title: Regulatory Compliance Engineer Company: Hewlett Packard Enterprise Company 6280 America Center Drive San Jose, CA 95002 USA arubanetworks.com Page 1 of 1