FCC ID: JQ6-SECONNECT HERMES E-Module BLE and dual-band WiFi

HID INTERNAL REVIEW ONLY | Contact techpubs@hidglobal.com Module Part Number MDP-04875 SRD Model Number BT/WIFIE Input Voltage VDC 5 - 16 VDC Standby Current AVG 10 mA Peak Current 250 mA Operating Temperature -30 F to 149 F (-35 C to 65 C) FCC ID JQ6-SECONNECT IC 2236B-SECONNECT Product7 Base Part Number Input Voltage VDC Current 1 Max AVG3 95 mA 100 mA 135 mA 95 mA 100 mA 135 mA 95 mA 100 mA 145 mA 100 mA 105 mA 155 mA Peak4 Operating Temperature5 200 mA 220 mA 30 F to 150 F (-35 C to 66 C) 125 mA 125 mA 165 mA Standby AVG2 60 mA 75 mA 110 mA 60 mA 75 mA 110 mA 65 mA 85 mA 120 mA 120 mA 120 mA 85 mA 85 mA 85 mA 95 mA 95 mA 95 mA 130 mA 130 mA 130 mA 75 mA 75 mA 75 mA 75 mA 75 mA 90 mA 90 mA 90 mA 900N 900P 900L 910N 910P 910L 920N 920P 920L 921N 921P 921L 95AN 95BN 95BP 5 - 16 VDC

(12 VDC for RS-485) 5.5 - 16 VDC

(12 VDC for RS-485)

(12 VDC for RS-485)

(12 VDC for RS-485) 5 - 16 VDC 5 - 16 VDC 5 - 16 VDC Cable Length66 Cable Length6 Cable Length R10 RP10 R15 RP15 R40 RP40 RK40 RPK40 R95A R95B RP95B Product7 R10 RP10 R15 RP15 R40 RP40 RK40RK40 RK40 RPK40 RPK40 RPK40 R95AR95A R95A R95BR95B R95B RP95B RP95B Regulatory Ref Number R10Ex1x2x3 RP10Ex 1x2x3 R15Ex 1x2x3 RP15Ex 1x2x3 R40Ex 1x2x3 RP40Ex 1x2x3 RK40Ex 1x2x3 RPK40Ex 1x2x3 RA30Ex 1x2x3x4 RPA30Ex 1x2x3x4 RPA30x 1x2x3x4 UL Reference Number Deciphering:

x1 Reader Colors:

K = Black x2 Wiring:

x3 Communication:

N = Pigtail T = Terminal 5 = 5 meter Pigtail N = No Module R = RS-485 (OSDP) L = Indala Prox B = Bluetooth W = WiFi x4 Harware version:

Blank = Potted Electronics 2 = Overmolded Electronics Communication Lines Communication Lines Wiegand = 500 ft - 22 AWG (152 m), Wiegand = 500 ft - 22 AWG (152 m), Wiegand 300 ft - 24 AWG (91 m) 300 ft - 24 AWG (91 m) 300 ft - 24 AWG (91 m) RS-485 = Max bus length: 4,000 ft - 24 AWG (1,219 m)

= Max bus length: 4,000 ft - 24 AWG (1,219 m) RS-485 = Max bus length: 4,000 ft - 24 AWG (1,219 m) RS-485 Max length between nodes: 1,640 ft - 24 AWG (500m) Max length between nodes: 1,640 ft - 24 AWG (500m) Max length between nodes: 1,640 ft - 24 AWG (500m) otocols other than Wiegand or Clock & Data (for control Communication protocols other than Wiegand or Clock & Data (for control otocols other than Wiegand or Clock & Data (for control Communication protocols other than Wiegand or Clock & Data (for control 1 Communication pr 1 Communication protocols other than Wiegand or Clock & Data (for control panels), as well as credential interfaces over BLE (not applicable for 9xxL panels), as well as credential interfaces over BLE (not applicable for 9xxL panels), as well as credential interfaces over BLE (not applicable for 9xxL panels), as well as credential interfaces over BLE (not applicable for 9xxL panels), as well as credential interfaces over BLE (not applicable for 9xxL models), require an additional hardware module which increases current models), require an additional hardware module which increases current models), require an additional hardware module which increases current by 40 mA. by 40 mA. 2 2 3 Maximum AVG - RMS current draw during continuous card reads. 33 Maximum A Maximum A VG - RMS current draw during continuous card reads. Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL. Not evaluated by UL. Not evaluated by UL. 4 Peak - highest instantaneous current draw during RF communication. 44 PPeak - highest instantaneous current draw during RF communication. eak - highest instantaneous current draw during RF communication. 5 55

(-25 C to 65 C)

(-25 C to 65 C)

(-25 C to 65 C) 6 Wiegand Cable Lengths:

6 Wiegand Cable Lengths:

Wiegand Cable Lengths:

Wiegand Cable Lengths:

Wiegand Cable Lengths:

Wiegand Cable Lengths:

100ft (30.5 m) 22 AWG @ 5 100ft (30.5 m) 22 AWG @ 5 100ft (30.5 m) 22 AWG @ 5 6.4 VDC

-- 6.4 VDC 100ft (30.5 m) 22 AWG @ 5 100ft (30.5 m) 22 AWG @ 5 100ft (30.5 m) 22 AWG @ 5 - 6.4 VDC 500ft (152m) 22 AWG @ 6.5 - 16 VDC 500ft (152m) 22 AWG @ 6.5 - 16 VDC 500ft (152m) 22 AWG @ 6.5 - 16 VDC 7 77 Regulatory Regulatory Regulatory FCC FCCFCC Canada CE Marking HID iCLASS SE Connectivity Module Install Guide Supplied parts Recommended parts (not supplied) Module installation PLT-05750, Rev A.0.R2 2022 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

HID iCLASS SE Connectivity Module Install Guide Addendum FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation. ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference; (2) This device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Le prsent appareil est conforme aux CNR dISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 51505250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. RF EXPOSURE CONSIDERATIONS FCC This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure - At least 20 cm of separation distance between the module and the user's body must be maintained at all times. ISED This device meets the IC requirements for RF exposure in public or uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure - At least 20 cm of separation distance between the module and the user's body must be maintained at all times. INSTRUCTION TO MODULE INTEGRATOR LABELING A label must be affixed to the outside of final commercial product with the following statements:

Contains FCC ID: JQ6-SECONNECT Contains IC: 2236B-SECONNECT ANTENNA The antenna gain of a new antenna should be of the same type as the originally approved antenna and the antenna gain should not be higher than the antenna gain of the originally tested antenna. The list of originally approved PCB antennas is the following:

BLE - Type of antenna: chip SMD; WURTH P/N: 7488930245; peak gain: 0.5 dBi Wi-Fi - Type of antenna: chip SMD; AVX P/N: M830520; peak gain: 1.0 dBi (2.4 GHz); 2.6 dBi (5 GHz) FCC RF EXPOSURE CONSIDERATIONS Consistent with 2.909(a), the following text must be included within the users manual or operator instruction guide for the final commercial product:

This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is only authorized for use in a mobile application. At least 20 cm of separation distance between the module and the user's body must be maintained at all times. ADDITIONAL TESTING, PART 15 SUBPART B DISCLAIMER The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. The FCC Part 15 Statement shall be included in the user manual of final commercial product if applicable. CAUTION STATEMENT FOR MODIFICATIONS:

CAUTION: Any changes or modifications not expressly approved could void the users authority to operate the equipment.