FCC ID: JQ6-SIGNO40K HID SIGNO READER

 

INSTALLATION GUIDE Pigtail versions Terminal strip versions 2 Wire the reader HID Signo Reader 13.56 MHz / 125 kHz / 2.4 GHz Contactless and Keypad Readers SRD Models: 20, 20K, 40, 40K PLT-03703, Rev. A.1 www.hidglobal.com/PLT-03704 Scan the QR code or visit the link to see the multi-language electronic version of this document. Faa a leitura do cdigo QR ou acesse o link da verso em portugus deste documento. Lisez le code QR ou suivez le lien pour Scansiona il codice QR o visita il link della consulter la version franaise de ce document. Escanee el cdigo QR o visite el vnculo para consultar la versin en Espaol de este documento. Scannen Sie den QR-Code oder ffnen Sie den Link fr die deutsche Version dieses Dokuments. versione Italiana di questo documento. QR-

. QR QR QR

. Supplied parts HID Signo Reader (1) Installation Guide (1) Flat head/countersunk 0.138-20 x 1.5" self tapping screws (2) for installing the reader directly to a wall (no junction box) Flat head/countersunk 0.138-32 x 0.375"

machine screws (3) for Imperial (US) junction box installation (2) and attaching the reader to the mounting plate (1) Flat head/countersunk M3.5 x 12mm machine screws (2) for Metric (EU etc) junction box installation Flat head/countersunk 0.138-32 x 0.375"

security screw (1) alternative anti-tamper screw for attaching the reader to the mounting plate 5-pin terminal connectors, terminal strip models only (2) Recommended parts (not supplied) Cable, 5-10 conductor (Wiegand or Clock-and-Data), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden 3107A or equivalent (OSDP) Certified LPS DC power supply Metal or plastic junction box Security tool HID 04-0001-03 (for anti-tamper screw) Drill with various bits for mounting hardware Mounting hardware Reader spacer when mounting on or near metal or metal junction boxes. Refer to the Reader and Credentials How to Order Guide

(PLT-02630) for available options and part numbers) Junction box 2019 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID Brick logo, the Chain Design, HID Signo, HID Reader Manager, iCLASS, and HID Mobile Access are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Optional features Tamper Enabled by default and activated when the mounting plate is removed. The tamper is normally closed and changes to open circuit between Tamper 1 and Tamper 2 control lines. Tamper 1 and Tamper 2 control lines are interchangeable. Either of these lines can be connected with the reader ground line to reduce the number of cable cores required in the reader cable. Tamper 1 and Tamper 2 are rated 012VDC at 100mA. Hold Input When asserted, this line either buffers a card (default) or disables a card read until released, as configured. 1 Mount the mounting plate ATTENTION Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES CAUTION: Install the reader on a flat, stable surface. Failure to do so may compromise the IP rating and/or tamper feature. If mounting on or near metal, a spacer is recommended for optimal read performance. Refer to the Readers and Credentials How to Order Guide (PLT-02630) for available options and part numbers. CAUTION: Use the supplied screws to ensure correct fitting and to avoid damaging the reader or mounting plate. HID is not responsible for damage due to use of unapproved mounting hardware. For Imperial (US):

Use supplied flat head/

countersunk 0.138-32 x 0.375"

screws. For Metric (EU etc):

Use supplied flat head/

countersunk M3.5 x 12mm screws. 18"

(0.46m) PIGTAIL TERMINAL DESCRIPTION Red Black White Green Orange Yellow Blue Brown Violet Bare Violet/White 1 2 3 4 5 6 7 8 9 10 Wiegand Data 1 / Clock / RS485-A*

Wiegand Data 0 / Data / RS485-B*

Hold Input / LED Input (BLUE)*

+VDC Ground (RTN) LED Input (GRN) Beeper Input LED Input (RED) Tamper 2 (RLY2) Tamper 1 (RLY1)

*Dependent upon reader configuration. Drain (pigtail models only) Note: Wiring the reader incorrectly may permanently damage the reader. Note: Previous iCLASS readers had reversed RS-485 wiring (P2-7 & P2-6 - A & B). When upgrading to a HID Signo reader, ensure proper connections as defined above. Note: Data 0 and Data 1 wires for Wiegand may be reused for OSDP. However, standard Wiegand cable may not meet RS485 twisted pair recommendations. Note: For OSDP cable lengths greater than 200 ft (61 m) or EMF interference, install 120 +/- 2 resistor across RS-485 termination ends. Note: For keypad configuration, with the keypad reader operating as 26 bit emulation, enter the facility code followed by # within five seconds of power-up. The facility code must be entered as three digits (i.e., for a facility code of 10 enter 0-1-0-#). If unsuccessful, the reader LED displays solid red. Power-cycle the reader and retry entering the facility code. HID Signo readers use facility codes between 1-255, and no default is set. Once a facility code is entered, the reader LED displays violet, then solid red. Then, power-cycle the reader. If there are two short beeps after entering a PIN, the reader facility code is not configured. In this case, power-cycle the reader and retry entering the facility code. 3 Secure the reader to the mounting plate 1 1. Hook the top of the reader on the top of the mounting plate. 2. Align the bottom of the reader with the bottom of the mounting plate. 3. Secure the reader to the mounting plate using the supplied 0.138-32 x 0.375" screw. Security/anti-tamper screw:

0.138-32 x 0.375" screw (supplied). Non-security/standard screw:

0.138-32 x 0.375" screws (supplied). 2 3 4 Power and test the reader hid g lo bal.com Power the reader. The reader will beep and the LED will flash. Test the reader with a credential. The reader will beep and the LED will flash. Specifications INPUT VOLTAGE (V DC) 12V DC 20 20K 40 40K CURRENT STANDBY AVG1 MAX AVG2 PEAK3 OPERATING TEMPERATURE CABLE LENGTH REGULATORY REF NUMBER FREQUENCY FCC IDS IC IDS 60 mA 70 mA 250 mA 65 mA 75 mA 250 mA 65 mA 75 mA 250 mA 70 mA 80 mA 250 mA

-30 F to 150 F (-35 C to 66 C) Communication Lines Wiegand = 500 ft - 18 AWG (152 m) 300 ft - 20 AWG (91 m) RS-485 = Max bus length: 4,000 ft - 24 AWG (1,219 m) Max length between nodes: 1,640 ft - 24 AWG (500m) 20 20K 40 40K BLE: 2.42.480 GHz, HF: 13.56 MHz, LF: 125 kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K 2236B-SIGNO20 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO40K Taiwan According to Administrative Regulations on Low Power Radio Waves Radiated Devices Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Korean KCC 20, 20K, 40, 40K RFID:13.56MHz RFID:13.56MHz RFID:10m47.544mv DC12.0V Russia RFID:ASK,NFC:GFSK A1D X-tal

+7 495 223 6008 1 Standby AVG - RMS current draw without a card in the RF field. 2 Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL. 3 Peak - highest instantaneous current draw during RF communication. 140573, , ., , . Regulatory UL Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Suitable for outdoor use. Only Wiegand, OSDP, and Bluetooth communications have been evaluated by UL. HID Signo readers are compatible with HID Mobile Access version 3.0.0 and later using mobile devices with BLE version 4.2 and later listed at:

https://www.hidglobal.com/mobile-access-compatible-devices. Install in accordance with NFPA70 (NEC) Local Codes, and authorities having jurisdiction. Follow all National and Local Codes. local.declarant@gmail.com e-mail Japan MIC

(AC-) RFID Japan Giteki for BLE UL 294 Performance Levels MODEL #

ACCESS CONTROL LINE SECURITY LEVEL Level I DESTRUCTIVE ATTACK LEVEL ENDURANCE STAND-BY LEVEL POWER LEVEL CONDITIONS Level I Level I Level IV 20 / 20K / 40 / 40K FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada Radio Certification This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CE Marking HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU. HID Global dclare par la prsente que ces lecteurs proximit sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 2014/53/EU. A HID Global, por meio deste, declara que estes leitores de proximidade esto em conformidade com as exigncias essenciais e outras condies da diretiva 2014/53/EU. HID Global besttigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU erfllen. HID Global dichiara che i lettori di prossimit sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 2014/53/EU. Download copies of the Radio Equipment Directive Declaration of Conformity (DoC) at:

http://www.hidglobal.com/certifications R xxx-xxxxxx Israel

, . Brazil Compliance Statement Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo 242/2000, e atende aos requisitos tcnicos aplicados. Para maiores informaes, consulte o site da ANATEL - www.anatel.gov.br This product is homologated at ANATEL according to procedure regulated by Resolution 242/2000, and it complies with the applicable technical requirements. For more information, consult ANATEL website - www.anatel.gov.br RF Warning Statement Per Article 6 of Resolution 506, equipment of restricted radiation must carry the following statement in a visible location:

Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. This equipment operates in secondary character, meaning it does not have the right of protection against harmful interference, even against those the same character, and it cannot cause any interference to systems operating in the primary character. HHHHH-AA-FFFFF HHHHH-AA-FFFFF UAE Singapore Indonesia TRA REGISTERED NO:

nnnnnnn DEALER NO:

DA37204/14 Complies with IMDA Standards DB106440

(Certificate Number)

(PLG ID Number) South Africa Australia and New Zealand TA XXXX-YYYY APPROVED E4662 PLT-03703, Rev. A.1 hid g lo bal.com

 

 

INSTALLATI ON GUIDE HID Signo Reader 13.56 MHz / 125 kHz / 2.4 GHz Contactless and Keypad Readers SRD Models: 20, 20K, 40, 40K PLT-03704, Rev. A.1 Supplied parts HID Signo Reader (1) Installation Guide (1) Flat head/countersunk 0.138-20 x 1.5 selftapping screws (2) for installing the reader directly to a wall

(no junction box) Flat head/countersunk 0.138-32 x 0.375 machine screws (3) for Imperial (US) junction box installation

(2) and attaching the reader to the mounting plate (1) Flat head/countersunk M3.5 x 12mm machine screws

(2) for Metric (EU etc) junction box installation Flat head/countersunk 0.138-32 x 0.375 security screw

(1) alternative anti-tamper screw for attaching the reader to the mounting plate 5-pin terminal connectors, terminal strip models only

(2) Recommended parts

(not supplied) Cable, 5-10 conductor (Wiegand or Clock-and-Data), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden 3107A or equivalent (OSDP) Certified LPS DC power supply Metal or plastic junction box Security tool HID 04-0001-03 (for anti-tamper screw) Drill with various bits for mounting hardware Mounting hardware Reader spacer when mounting on or near metal or metal junction boxes. Refer to the Reader and Credentials How to Order Guide (PLT-02630) for available options and part numbers Junction box Specifications CURRENT STANDBY AVG1 MAX AVG2 PEAK3 OPERATING TEMPERATURE CABLE LENGTH INPUT VOLTAGE (V DC) 12V DC 20 20K 40 40K 60 mA 70 mA 250 mA 65 mA 75 mA 250 mA 65 mA 75 mA 250 mA 70 mA 80 mA 250 mA

-30 F to 150 F (-35 C to 66 C) Communication Lines Wiegand = 500 ft - 18 AWG (152 m) 300 ft - 20 AWG (91 m) RS-485 = Max bus length: 4,000 ft - 24 AWG (1,219 m) Max length between nodes: 1,640 ft - 24 AWG (500m) REGULATORY REF NUMBER 20 20K 40 40K FREQUENCY FCC IDS BLE: 2.42.480 GHz, HF: 13.56 MHz, LF: 125 kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K IC IDS 1 Standby AVG - RMS current draw without a card in the RF field. 2 Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL. 3 Peak - highest instantaneous current draw during RF communication. 2236B-SIGNO20K 2236B-SIGNO20 2236B-SIGNO40 2236B-SIGNO40K hi d g lo bal.com Optional features Tamper Enabled by default and activated when the mounting plate is removed. The tamper is normally closed and changes to open circuit between Tamper 1 and Tamper 2 control lines. Tamper 1 and Tamper 2 control lines are interchangeable. Either of these lines can be connected with the reader ground line to reduce the number of cable cores required in the reader cable. Tamper 1 and Tamper 2 are rated 012VDC at 100mA. Hold Input When asserted, this line either buffers a card (default) or disables a card read until released, as configured. 1 Mount the mounting plate ATTENTION Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES CAUTION: Install the reader on a flat, stable surface. Failure to do so may compromise the IP rating and/or tamper feature. If mounting on or near metal, a spacer is recommended for optimal read performance. Refer to the Readers and Credentials How to Order Guide

(PLT-02630) for available options and part numbers. CAUTION: Use the supplied screws to ensure correct fitting and to avoid damaging the reader or mounting plate. HID is not responsible for damage due to use of unapproved mounting hardware. For Imperial (US):

Use supplied flat head/countersunk 0.138-32 x 0.375 screws. For Metric (EU etc):

Use supplied flat head/countersunk M3.5 x 12mm screws. PLT-03704, Rev. A.1 2 December 2019 2 Wire the reader Pigtail version Terminal Strip version 18" (0.46m) PIGTAIL TERMINAL DESCRIPTION Red Black White Green Orange Yellow Blue Brown Violet Bare Violet/White 1 2 3 4 5 6 7 8 9 10

+VDC Ground (RTN) Wiegand Data 1 / Clock / RS485-A*

Wiegand Data 0 / Data / RS485-B*

LED Input (GRN) Beeper Input Hold Input / LED Input (BLUE)*

LED Input (RED) Tamper 2 (RLY2) Tamper 1 (RLY1) Drain (pigtail models only)

*Dependent upon reader configuration Note: Wiring the reader incorrectly may permanently damage the reader. Note: Previous iCLASS readers had reversed RS-485 wiring (P2-7 & P2-6 - A & B). When upgrading to a HID Signo reader, ensure proper connections as defined above. Note: Data 0 and Data 1 wires for Wiegand may be reused for OSDP. However, standard Wiegand cable may not meet RS485 twisted pair recommendations. Note: For OSDP cable lengths greater than 200 ft (61 m) or EMF interference, install 120 +/- 2 resistor across RS-

485 termination ends. Note: For keypad configuration, with the keypad reader operating as 26 bit emulation, enter the facility code followed by # within five seconds of power-up. The facility code must be entered as three digits (i.e., for a facility code of 10 enter 0-1-0-#). If unsuccessful, the reader LED displays solid red. Power-cycle the reader and retry entering the facility code. HID Signo readers use facility codes between 1-255, and no default is set. Once a facility code is entered, the reader LED displays violet, then solid red. Then, power-cycle the reader. If there are two short beeps after entering a PIN, the reader facility code is not configured. In this case, power-cycle the reader and retry entering the facility code. PLT-03704, Rev. A.1 3 December 2019 3 Secure the reader to the mounting plate 1 1. Hook the top of the reader on the top of the mounting plate. 2. Align the bottom of reader with the bottom of the mounting plate. 3. Secure the reader to the mounting plate using the supplied 0.138-32 x 0.375 screw. Security/anti-tamper screw:

0.138-32 x 0.375" screw (supplied) Non-security/standard screw:

0.138-32 x 0.375" screws (supplied) 2 3 4 Power and test the reader Power the reader. The reader will beep and the LED will flash. Test the reader with a credential. The reader will beep and the LED will flash. PLT-03704, Rev. A.1 4 December 2019 GUIDE DINSTALLATION Lecteur HID Signo Lecteurs sans contact et pav numrique 13,56MHz/125kHz/2,4GHz Modles SRD: 20, 20K, 40, 40K PLT-03704, Rev. A.1 Pices fournies Lecteur HID Signo (1) Guide dinstallation (1) Vis autotaraudeuses tte plate/fraise 0,138-20 x 1,5

(2) pour installer le lecteur directement sur un mur

(pas de botier de raccordement) Vis mtaux tte plate/fraise 0,138-32 x 0,375 (3) pour linstallation du botier de raccordement imprial

(tats-Unis) (2) et la fixation du lecteur laplaque de montage (1) Vis mtaux tte plate/fraise M 3,5 x 12mm (2) pour linstallation du botier de raccordement mtrique (UE, etc.) Vis de scurit tte plate/fraise 0,138-32 x 0,375(1) vis anti-vol alternative pour fixer le lecteur laplaque de montage Connecteurs de borne 5broches, modles bornier uniquement (2) Pices recommandes

(non fournies) Cble, 5 10conducteurs (Wiegand ou Clock-and-Data), 4conducteurs paires torsades entirement blinds et homologus UL, Belden 3107A ou quivalent (OSDP) Alimentation CC certifie LPS Botier de raccordement en mtal ou plastique Outil de scurit HID 04-0001-03 (pour vis anti-vol) Perceuse avec diffrentes mches pour matriel demontage Matriel de montage Entretoise pour le montage sur ou proximit demtal ou de botiers de raccordement en mtal. Reportez-vous au Guide des commandes de Lecteurs et cartes didentification (PLT-02630) pour connatre les options disponibles et les numros de pice. Botier de raccordement Caractristiques TENSION DENTRE (VCC) 12VCC 20 20K 40 40K COURANT MOY VEILLE1 MOY MAX.2 CRTE3 TEMPRATURE DE FONCTIONNEMENT LONGUEUR DE CBLE 60mA 70mA 250mA 65mA 75mA 250mA 65mA 75mA 250mA 70mA 80mA 250mA

-35 66C (-30 150F) Lignes de communication Wiegand = 500pi - 18AWG (152m) 91m - 20AWG RS-485 = long. max du bus: 1219m - 24AWG Longueur maximale entre les nuds: 500m - 24AWG NUMRO DE RF. RGLEMENTAIRE 20 20K 40 40K FRQUENCE ID FCC BLE: 2,4-2,480GHz, HF: 13,56MHz, LF: 125kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K ID IC 1 MOY veille: courant efficace sans carte dans le champ RF. 2 MOY max.: courant efficace durant les lectures de carte continues. Non valu par UL. 3 Crte: courant instantan le plus lev durant une communication RF. 2236B-SIGNO20K 2236B-SIGNO20 2236B-SIGNO40 2236B-SIGNO40K hi d g lo bal.com Fonctionnalits en option Scurit Active par dfaut lorsque la plaque de montage est retire. La scurit est normalement ferme et change pour ouvrir le circuit entre les lignes de contrle Scurit 1 et Scurit 2. Les lignes de contrle Scurit 1 et Scurit 2 sont interchangeables. Ces lignes peuvent tre connectes la ligne au sol du lecteur pour rduire le nombre de conducteurs decble ncessaires dans le cble du lecteur. Scurit 1 et Scurit 2 ont une tension nominale de 0-12VCC 100mA. Entre Hold lorsquelle est active, cette ligne met une carte en mmoire tampon (par dfaut) ou dsactive la lecture de carte lorsque lentre est active, selon la configuration dfinie. 1 Montage de la plaque de montage Les manipulations des APPAREILS SENSIBLES AUX DCHARGES LECTROSTATIQUES doivent tre effectues avec prcaution. ATTENTION MISE EN GARDE: Installez le lecteur sur une surface plane et stable. Dans le cas contraire, cela pourrait compromettre la classification IP et/ou la fonction de scurit. En cas de montage sur ou proximit de mtal, une entretoise est recommande pour des performances de lecture optimales. Reportez-vous au Guide des commandes de Lecteurs et cartes didentification (PLT-02630) pour connatre les options disponibles etles numros de pice. MISE EN GARDE: Utilisez les vis fournies pour assurer un montage correct et viter dendommager le lecteur ou la plaque de montage. HID nest pas responsable des dommages dus lutilisation de matriel de montage non approuv. Pour le systme imprial (tats-Unis):

Utilisez les vis tte plate/fraise 0,138-32 x 0,375 fournies. Pour le systme mtrique (UE, etc.):

Utilisez les vis tte plate/fraise M3,5 x 12mm fournies. PLT-03704, Rev. A.1 6 December 2019 2 Cblage du lecteur Version pigtail Version bornier 18" (0,46m) PIGTAIL BORNE DESCRIPTION Rouge Noir Blanc Vert Orange Jaune Bleu Marron Violet Nu Violet/Blanc 1 2 3 4 5 6 7 8 9 10

+V cc Masse (RTN) Donnes Wiegand 1 / Clock / RS485-A*

Donnes Wiegand 0 / Data / RS485-B*

Entre LED (VERT) Entre bip Entre Hold/entre LED (BLEU)*

Entre LED (ROUGE) Scurit 2 (RLY2) Scurit 1 (RLY1) Drain (modles pigtail seulement)

*Selon la configuration du lecteur. Remarque: Le cblage incorrect du lecteur peut entraner des dommages permanents. Remarque: Les prcdents lecteurs iCLASS comportaient un cblage RS-485 invers (P2-7 et P2-6 - A et B). Lorsdela mise niveau vers un lecteur HID Signo, effectuer les connexions appropries comme indiqu ci-dessus. Remarque: Les fils Data0 et Data1 pour Wiegand peuvent tre rutiliss pour OSDP. Cependant, le cble Wiegand standard peut ne pas tre conforme aux recommandations dutilisation de paire torsade RS-485. Remarque: Pour les cbles OSDP dune longueur suprieure 61m ou les interfrences de champ lectromagntique, installer une rsistance de 120 +/- 2 aux terminaisons RS-485. Remarque: Pour la configuration du pav numrique, avec un lecteur pav numrique fonctionnant en mode dmulation 26bits, entrer le code site suivi de # dans les cinq secondes suivant la mise sous tension. Le code site doit tre saisi manuellement sous forme de trois chiffres (par exemple, le code site 10 doit tre saisi sous la forme 0-1-0-#). En cas dchec, le voyant du lecteur reste allum en rouge. Le lecteur doit alors tre redmarr pour effectuer une nouvelle tentative de saisie du code site. Les lecteurs HID Signo utilisent des codes site compris entre 1 et 255 et aucune valeur par dfaut nest dfinie. Une fois le code site entr, le voyant du lecteur reste allum en violet, puis en rouge. Le lecteur doit ensuite tre redmarr. Si deux bips courts sont mis aprs la saisie du code PIN, le code site du lecteur nest pas configur. Le lecteur doit alors tre redmarr pour effectuer une nouvelle tentative de saisie du code site. PLT-03704, Rev. A.1 7 December 2019 3 Fixation du lecteur la plaque de montage 1 1. Accrochez le haut du lecteur avec lehaut de la plaque de montage. 2. Alignez le bas du lecteur avec le bas dela plaque de montage. 3. Fixez le lecteur la plaque de montage laide de la vis fournie 0,138-32 x 0,375. Vis de scurit/anti-vol:

Vis 0,138-32 x 0,375 (fournie) Vis sans scurit/standard:

Vis 0,138-32 x 0,375 (fournies) 2 3 4 Mise sous tension et essai du lecteur Mettez le lecteur sous tension. Le lecteur met un bip et le voyant clignote. Testez le lecteur avec une information didentification. Lelecteur met un bip et le voyant clignote. PLT-03704, Rev. A.1 8 December 2019 INSTALLATI ONSANLEITUNG HID Signo-Leser 13,56MHz / 125kHz / 2,4GHz Kontaktlose Leser und Leser mit Ziffernblock SRD-Modelle: 20, 20K, 40, 40K Lieferumfang HID Signo-Leser (1) Installationsanleitung (1) Linsensenk-Blechschrauben 0,138201,5Zoll (2) zur direkten Wandmontage des Lesers (ohne Anschlussdose) Linsensenk-Maschinenschrauben 0,138320,375Zoll

(3) zur Montage der imperialen Version (USA) der Anschlussdose (2) und Befestigung des Lesers an Montageplatte (1) Linsensenk-Maschinenschrauben M3,512mm (2) zur Montage der metrischen Version (EU usw.) der Anschlussdose Linsensenk-Sicherungsschraube 0,138320,375Zoll

(1) alternative manipulationssichere Schraube zur Befestigung des Lesers an der Montageplatte 5-polige Anschlussklemmen, nur Klemmenleistenmodelle (2) PLT-03704, Rev. A.1 Empfohlene Teile (nicht im Lieferumfang enthalten) Kabel, 510Leiter (Wiegand oder Takt/Daten), 4Leiter mit verdrillten Aderpaaren, voll geschirmt und UL-geprft, Belden3107A oder gleichwertig (OSDP) Zertifiziertes LPS DC-Netzteil Anschlussdose aus Metall oder Kunststoff Sicherheitswerkzeug HID 04-0001-03

(frmanipulationssichere Schraube) Bohrmaschine mit verschiedenen Bohrern frMontageteile Montageteile Leser-Abstandhalter fr Montage auf oder nahe Metall oder Anschlussdosen aus Metall. Informationen zu verfgbaren Optionen und Teilenummern finden Sie in der Anleitung zum Bestellen von Lesern und Anmeldeinformationen (PLT-02630). Anschlussdose Technische Daten EINGANGSSPANNUNG (VDC) 12V DC 20 20K 40 40K STROMSTRKE STANDBY AVG1 MAX AVG2 PEAK3 BETRIEBSTEMPERATUR KABELLNGE 60mA 70mA 250mA 65mA 75mA 250mA 65mA 75mA 250mA 70mA 80mA 250mA

-30 bis 150F (-35 bis 66C) Kommunikationsleitungen Wiegand = 500ft 18AWG (152m) 300ft 20AWG (91m) RS-485= Max. Buslnge: 4.000ft 24AWG (1.219m) Max. Lnge zwischen Knoten: 1.640ft 24AWG (500m) BEHRDLICHE REF.NUMMER 20 20K 40 40K FREQUENZ FCC-IDs BLE: 2,4002,480GHz, HF: 13,56MHz, LF: 125kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K IC-IDs 1 Standby AVG Effektive Stromaufnahme ohne Karte im HF-Feld. 2 Maximum AVG Effektive Stromaufnahme bei kontinuierlichem Kartenlesen. Nicht von UL bewertet. 3 Peak Hchste verzgerungsfreie Stromaufnahme whrend HF-Kommunikation. 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO20 2236B-SIGNO40K hi d g lo bal.com Optionale Funktionen Optische Verriegelung Standardmig aktiviert oder aktiviert bei Entfernen der Montageplatte. Die optische Verriegelung ist normalerweise geschlossen, bei nderung ffnet sich der Schaltkreis zwischen Steuerungsleitung Tamper1 und Tamper2. Die Steuerungsleitungen Tamper1 und Tamper 2 sind austauschbar. Eine beliebige dieser Leitungen kann mit dem Erdleiter des Lesers verbunden werden, um die Anzahl der im Leserkabel erforderlichen Kabeladern zu verringern. Tamper1 und Tamper2 sind auf 012VDC bei 100mA ausgelegt. Eingang halten Wenn aktiviert, wird je nach Konfiguration eine Karte (Standard) entweder in den Puffer geschrieben oder das Lesen bis zur Freigabe deaktiviert. 1 Montageplatte anbringen Beachten Sie die Vorsichtsmanahmen fr den Umgang mit ELEKTROSTATISCH GEFHRDETEN BAUELEMENTEN ACHTUNG VORSICHT: Montieren Sie das Lesegert auf einer ebenen, stabilen Oberflche. Andernfalls knnen die IP-Schutzart und/oder die Verriegelungsfunktion beeintrchtigt werden. Bei Montage auf oder in der Nhe von Metall wird ein Abstandhalter empfohlen, um eine optimale Leseleistung zu erzielen. Informationen zu verfgbaren Optionen und Teilenummern finden Sie in der Anleitung zum Bestellen von Lesern und Anmeldeinformationen (PLT-02630). VORSICHT: Verwenden Sie die mitgelieferten Schrauben, um den korrekten Sitz sicherzustellen und eine Beschdigung des Lesegerts oder der Montageplatte zu vermeiden. HID haftet nicht fr Schden, die durch die Verwendung nicht zugelassener Montageteile entstehen. Fr imperiale Version (US):

Verwenden Sie die mitgelieferten Linsensenk-Maschinenschrauben 0,138-32 0,375Zoll. Fr metrische Version (EU usw.):

Verwenden Sie die mitgelieferten Linsensenk-Maschinenschrauben M3,512mm. PLT-03704, Rev. A.1 10 December 2019 2 Leser verdrahten Version mit Anschlusslitze Version mit Klemmenleiste 18" (0,46m) ANSCHLUSSLITZE KLEMME BESCHREIBUNG Rot Schwarz Wei Grn Orange Gelb Blau Braun Violett/Wei Violett Ohne Farbe 1 2 3 4 5 6 7 8 9 10

+VDC Erde (RTN) Wiegand-Data1/ Takt/ RS485-A*

Wiegand-Data0/ Daten/ RS485-B*

LED-Eingang (GRN) Beeper-Eingang Eingang halten/ LED-Eingang (BLUE)*

LED-Eingang (RED) Tamper2 (RLY2) Tamper1 (RLY1) Erdungsleitung (nur Litzen-Modelle)

*Abhngig von Konfiguration des Lesers Hinweis: Eine falsche Verdrahtung kann den Leser dauerhaft beschdigen. Hinweis: Frhere iCLASS-Leser hatten eine umgekehrte RS-485-Verdrahtung (P2-7 und P2-6 A und B). Stellen Sie bei einem Upgrade auf den HID Signo-Leser die oben definierten Verbindungen sicher. Hinweis: Data0- und Data1-Wiegandleitungen knnen fr OSDP wiederverwendet werden. Standard-Wiegandkabel entsprechen jedoch mglicherweise nicht den Empfehlungen fr RS-485 Twisted Pair. Hinweis: Installieren Sie bei OSDP-Kabellngen von mehr als 200ft (61m) oder EMF-Interferenz zwischen den RS-485-Abschlussenden einen 120--Widerstand (+/-2). Hinweis: Geben Sie fr die Tastaturkonfiguration eines Lesers mit Zifferntastatur und 26-Bit-Emulation innerhalb von fnf Sekunden nach dem Einschalten den Einrichtungscode gefolgt von # ein. Der einzugebende Einrichtungscode muss dreistellig sein (d.h. fr den Einrichtungscode10 muss 0-1-0-# eingegeben werden). Wenn die Eingabe nicht erfolgreich war, leuchtet die LED des Lesers durchgehen rot. Schalten Sie den Leser aus und wieder ein, undversuchen Sie erneut, den Einrichtungscode einzugeben. HID Signo-Leser verwenden Funktionscodes zwischen 1 und 255, wobei kein Standardwert festgelegt ist. Nach Eingabe des Einrichtungscodes leuchtet die LED des Lesers violett und dann durchgehend rot. Schalten Sie den Leser aus und wieder ein. Wenn nach Eingabe der PIN zwei kurze Pieptne zu hren sind, ist der Code des Lesers nicht konfiguriert. Schalten Sie in diesem Fall den Leser aus und wieder ein, und versuchen Sie erneut, den Einrichtungscode einzugeben. PLT-03704, Rev. A.1 11 December 2019 3 Leser an der Montageplatte befestigen 1 1. Haken Sie die Oberkante des Lesers an der Oberkante der Montageplatte ein. 2. Richten Sie die Unterkante des Lesers an der Unterkante der Montageplatte aus. 3. Befestigen Sie den Leser mit der mitgelieferten Schraube (0,13832 0,375Zoll) an der Montageplatte. Sicherheits-/Manipulationsschutz-

schraube:

0,138320,375"-Schraube

(imLieferumfang enthalten) Standardschraube/Keine Sicherungsschraube:

0,138320,375"-Schrauben

(imLieferumfang enthalten) 2 3 4 Leser einschalten und testen Schalten Sie den Leser ein. Der Leser piept, und die LED blinkt. Testen Sie den Leser mit einer gltigen Anmeldeinformation. Der Leser piept, unddie LED blinkt. PLT-03704, Rev. A.1 12 December 2019 GUA DE INSTALACIN Lector HID Signo 13.56 MHz / 125 KHz / 2.4 GHz sin contacto y lectores de teclado Modelos SRD: 20, 20 K, 40, 40 K PLT-03704, Rev. A.1 Lista de piezas Lector HID Signo (1) Gua de instalacin (1) 2 tornillos 0.138-20 x 1.5" avellanados de cabeza plana autorroscantes para instalar el lector directamente alapared (sin caja para conexiones) 3 tornillos de mquina 0.138-32 x 0.375" avellanados de cabeza plana: 2 para instalar la caja para conexiones (sistema imperial, EUA) y 1 para sujetar ellector a la placa trasera 2 tornillos de mquina M3.5 x 12 mm avellanados de cabeza plana para instalar la caja para conexiones

(sistema mtrico, UE y otros) 1 tornillo de seguridad 0.138-32 x 0.375" avellanado decabeza plana: tornillo alterno de seguridad para sujetar el lector a la placa trasera 2 conectores de terminal de 5 pines, solo para modelos con regleta de terminal Lista de piezas recomendadas

(no incluidas) Cable de 5-10conductores (Wiegand o Clock-and-

Data), par torcido de 4 conductores, blindaje aprobado por la UL, Belden 3107A o equivalente (OSDP) Fuente de alimentacin de CC con certificacin LPS Caja para conexiones metlica o de plstico Herramienta de seguridad HID04-0001-03

(paratornillo contra sabotaje) Taladro con varias brocas para tornillera de montaje Equipo de montaje Espaciador del lector cuando se coloca sobre o cerca de cajas metlicas o cajas metlicas para conexiones.

(Consulte la Gua para realizar pedidos de lectores y credenciales (PLT-02630) para ver las opciones disponibles y los nmeros de pieza) Caja para conexiones Especificaciones VOLTAJE DE ENTRADA (V DC) CORRIENTE ELCTRICA PROM. EN MODO DE ESPERA1 PROM. MX.2 MX.3 TEMPERATURA DE FUNCIONAMIENTO LONGITUD DEL CABLE NMERO DE REFERENCIA REGULATORIO FRECUENCIA IDS de FCC 20 20 K 40 40 K 12V DC 60mA 70mA 250mA 65mA 75mA 250mA 65mA 75mA 250mA 70mA 80mA 250mA

-30 a 150F (-35 a 66C) Lneas de comunicaciones Wiegand = 500pies - 18AWG (152 m) 300pies - 20AWG (91 m) RS-485 = longitud mx. del bus: 4000pies - 24AWG (1219 m) Longitud mx. entre nodos: 1640 pies - 24 AWG (500 m) 20 20 K 40 40 K BLE: 2.4 - 2.480 GHz, HF: 13.56 MHz, LF: 125 kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K IDS de IC 1 PROM. en modo de espera: consumo de corriente en RMS sin una tarjeta en el campo de RF. 2 PROM. mx.: consumo de corriente en RMS durante la lectura continua de tarjetas. No evaluado por UL. 3 MX.: consumo mximo de corriente instantnea durante comunicaciones de RF. 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO20 2236B-SIGNO40K hi d g lo bal.com Caractersticas opcionales Tamper: Habilitado de forma predeterminada, se activa cuando se retira la placa de montaje. El tamper normalmente est cerrado y cambia a circuito abierto entre las lneas de control Tamper 1 y Tamper 2. Las lneas de control Tamper 1 y Tamper 2 son intercambiables. Cualquiera de estas lneas se puede conectar a la lnea de tierra del lector para reducir el nmero decables bsicos que requiere el cable del lector. Tamper 1 y Tamper 2 tienen la clasificacin de 0-12 VDC a 100 mA. Entrada de retencin: Cuando se activa, esta lnea almacena una tarjeta (valor predeterminado) o deshabilita una lectura de tarjetas hasta que se libera, segn cmo se configure. 1 Montar la placa de montaje Lea las precauciones antes de manipular DISPOSITIVOS SENSIBLES A DESCARGAS ELECTROSTTICAS ATENCIN PRECAUCIN: Instale el lector en una superficie plana y estable. De lo contrario, puede poner en riesgo la clasificacin IP y/o la funcin de manipulacin. Si se monta sobre ocerca de un metal, se recomienda utilizar un espaciador para un rendimiento de lectura ptimo. Consulte la Gua para realizar pedidos de lectores y credenciales

(PLT-02630) para ver las opciones disponibles y los nmeros de pieza. PRECAUCIN: Utilice los tornillos suministrados para asegurar un ajuste correcto y evitar daar el lector o la placa de montaje. HID nose hace responsable de los daos causados por el uso de equipo de montaje no aprobado. Para sistema imperial (EUA):

Utilice los tornillos avellanados decabeza plana 0.138-32 x 0.375"

incluidos. Para sistema mtrico (UE y otros):

Utilice los tornillos avellanados de cabeza plana M3.5 x 12 mm incluidos. PLT-03704, Rev. A.1 14 December 2019 2 Conecte los cables del lector Versiones con cables flexibles Versiones de regleta de terminales 18" (0.46m) FLEXIBLE TERMINAL DESCRIPCIN Rojo Negro Blanco Verde Naranja Amarillo Azul Marrn Violeta Liso Violeta/Blanco 1 2 3 4 5 6 7 8 9 10

+VCC Conexin a tierra (RTN) Datos Wiegand 1/Reloj/RS485-A*

Datos Wiegand 0/Datos/RS485-B*

Entrada para LED verde (GRN) Entrada de bper Entrada de retencin/Entrada de LED (AZUL)*

Entrada para LED rojo (RED) Tamper 2 (RLY2) Tamper 1 (RLY1) Drenaje (solo modelos flexibles)

*Depende de la configuracin del lector Nota: El lector puede sufrir un dao permanente si el cableado es incorrecto. Nota: Los lectores iCLASS anteriores tenan el cableado RS-485 invertido (P2-7 y P2-6 - A y B). Al actualizar aunlector HID Signo, asegrese de que las conexiones sean correctas como se muestra arriba. Nota: Los cables de datos 0 y 1 para Wiegand pueden reutilizarse para OSDP. Sin embargo, el cable Wiegand estndar puede no cumplir con las recomendaciones de par trenzado RS485. Nota: Para longitudes de cable mayores a 200 pies (61 m) o interferencia EMF, instale resistores 120 +/- 2 en losextremos de RS-485. Nota: Para la configuracin del teclado, con el lector de teclado funcionando como emulacin de bits 26, ingrese el cdigo de instalacin seguido de la tecla # dentro de los cinco segundos posteriores al encendido. El cdigo de sitio se debe ingresar en formato de tres dgitos (es decir, para un cdigo de instalacin de 10 ingrese 0-1-0-#). Si el cdigo es incorrecto, el LED del lector se encender de color rojo. Reinicie el lector y vuelva a ingresar el cdigo de sitio. Los lectores HID Signo utilizan cdigos de sitio del 1 al 255 y no se establece ningn valor predeterminado. Al ingresar un cdigo de sitio, el LED del lector se enciende de color violeta y luego rojo. Despus, reinicie el lector. Si escucha dos pitidos cortos despus de ingresar un NIP, quiere decir que el cdigo de sitio del lector no est configurado. Reinicie el lector y vuelva a ingresar el cdigo del sitio. PLT-03704, Rev. A.1 15 December 2019 3 Asegure el lector a la placa de montaje 1 1. Enganche la parte superior del lector ala de la placa de montaje. 2. Alinee la parte inferior del lector con lade la placa de montaje. 3. Asegure el lector a la placa de montaje con el tornillo incluido 0.138-32 x 0.375". Tornillo de seguridad:

0.138-32 x 0.375" (incluido) Tornillo estndar/no de seguridad:

0.138-32 x 0.375" (incluidos) 2 3 4 Encienda y pruebe el lector Encienda el lector. Ellector emitir un pitido y el LED parpadear. Pruebe el lector con una credencial. El lector emitir un pitido y el LED parpadear. PLT-03704, Rev. A.1 16 December 2019 HID Signo 13,56/125/2,4() SRD:20,20K,40,40K PLT-03704, Rev. A.1 HIDSigno1. 1. 0,13820x1,5-

/(2.)

(). 0,13832x0,375-

/(3.)

(2.)

(1.). M3,5x12/

(2.)

(..). 0,13832x0,375-/

(1.)

. 5-, 2.

,510(WiegandClock-and-Data),

,4,, UL,Belden3107A,(OSDP). HID04-0001-03

: (PLT-02630).

(, ) 12. 20 20 40 40 1 2 3 60 70 250 65 75 250 65 75 250 70 80 250 3566C(30150F). Wiegand=152(500)18AWG 91(300)20AWG RS-485=:1219(4000)24AWG

:500(1640)24AWG 20 20 40 40 BLE:2,42,480,:13,56,:125

() JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K 2236B-SIGNO20 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO40K 1.,-. 2.. UL. 3.. hi d g lo bal.com

,Tamper1Tamper2. Tamper1Tamper2. Tamper1Tamper2012100.

(). 1.

. IP-()

(PLT-02630).

. HID

0,13832x0,375.

M3,5x12. PLT-03704, Rev. A.1 18 December 2019 2. 0,46

(18)

1 2 3 4 5 6 7 8 9 10

() WiegandData1/Clock/RS485-A*

WiegandData0/Data/RS485-B*

() 2(RLY2) 1(RLY1)

*. . iCLASSRS-485(P2-7 P2-6AB).HIDSigno,. Data0Data1WiegandOSDP. WiegandRS485. OSDP61(200) RS-485120(2). ,26-

(..10010#). HIDSigno1255;

..PIN-

,. PLT-03704, Rev. A.1 19 December 2019 3. 1 1. 2. 3.

, 0,13832x0,375-.

0,13832x0,375-

0,13832x0,375-

(). 2 3 4.

. PLT-03704, Rev. A.1 20 December 2019 GUIA DE INSTALAO Leitor HID Signo Leitores com teclado e sem contato de 13,56MHz/125KHz/2,4GHz Modelos SRD: 20, 20K, 40, 40K PLT-03704, Rev. A.1 Peas fornecidas Leitor HID Signo (1) Guia de instalao (1) Parafusos autoatarraxantes de cabea chata/

escareada de 0,138-20x1,5 (2) para instalar o leitor diretamente na parede (sem caixa de juno) Parafusos de mquina de cabea chata/escareada de0,138-32x0,375 (3) dois para instalar a caixa dejuno Imperial (2) (EUA) e um para fixar o leitor naplaca de montagem (1) Parafusos de mquina de cabea chata/escareada M3.5x12mm (2) para instalar a caixa de juno desistema mtrico (UE e outras localidades) Parafuso de segurana de cabea chata/escareada de 0,138-32x0,375 (1) parafuso do tamper sobressalente para fixar o leitor na placa de montagem Conectores terminais de 5 pinos, apenas modelos de Peas recomendadas

(no fornecidas) Cabo com 5-10 condutores (Wiegand), cabo de par tranado com 4 condutores blindado e aprovado pela UL, Belden 3107A ou equivalente (OSDP) Fonte de alimentao CC com certificao LPS Caixa de juno de metal ou plstico Ferramenta de segurana HID 04-0001-03

(paraparafuso anti-tamper) Furadeira com vrias brocas para a montagem doequipamento Equipamento de montagem Espaador, se o leitor for instalado em ou prximo demetal ou caixas de juno de metal. Consulte oGuia de pedidos de leitor e credenciais (PLT-02630) para obter as opes disponveis e os nmeros de peas) Caixa de juno TENSO DE ENTRADA (V CC) 12VCC 20 20K 40 40K 60mA 70mA 250 mA 65mA 75mA 250 mA 65mA 75mA 250 mA 70mA 80mA 250 mA

-35C a 66C (-30F a 150F) Linhas de comunicao Wiegand = 500 ps - 18 AWG (152 m) 300 ps - 20 AWG (91 m) RS-485 = Comprimento mximo de barramento:

4.000ps - 24AWG (1.219m) Comprimento mximo entre os ns: 1.640 ps - 24 AWG (500 m) 20 20K 40 40K BLE: 2,42.480 GHz, HF: 13,56 MHz, LF: 125 kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K IC IDS 1 MDIA em repouso - consumo de corrente RMS sem um carto no campo RF. 2 MDIA mxima - consumo de corrente RMS durante leituras contnuas de cartes. No avaliado pela UL. 3 Pico - consumo de corrente instantneo mais alto durante a comunicao de RF. 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO20 2236B-SIGNO40K rgua de bornes (2) Especificaes CORRENTE MDIA DE REPOUSO1 MDIA MXIMA2 PICO3 TEMPERATURA DE OPERAO COMPRIMENTO DO CABO NMERO DE REFERNCIA REGULAMENTAR FREQUNCIA FCC IDS hi d g lo bal.com Recursos opcionais Tamper Habilitado por padro e ativado quando a placa de montagem removida. O tamper normalmente fechado e muda para abrir o circuito entre as linhas de controle de tamper 1 e tamper 2. As linhas de controle de tamper1 etamper 2 so intercambiveis. possvel conectar qualquer uma delas linha aterrada do leitor para reduzir onmeronecessrio de ncleos no cabo do leitor. O tamper 1 e o tamper 2 so classificados entre 0-12VCC a 100mA. Entrada de reteno Quando ativada, esta linha armazena um carto em buffer (padro) ou desativa sua leitura at ser liberada, de acordo com a configurao. 1 Monte a placa de montagem Observe as precaues para o manuseio de DISPOSITIVOS SENSVEIS A DESCARGAS ELETROSTTICAS ATENO CUIDADO: Instale o leitor em uma superfcie plana e estvel. Seisso no for feito, aclassificao IP e/o recurso de tamper podem ser prejudicados. Se amontagem for feita em ou sobre metal, recomendado o uso de um espaador para alcanar odesempenho de leitura ideal. Consulte o Guia de pedidos de leitores e credenciais (PLT-02630) para obter as opes disponveis eos nmeros de pea. CUIDADO: Use os parafusos fornecidos para garantir o encaixe correto e para evitar danos ao leitor e placa de montagem. AHID no responsvel por danos causados pelo uso de ferramentas de montagem no aprovadas. Para o sistema imperial (EUA):

Use os parafusos de cabea chata/

escareada 0,138-32 x 0,375 fornecidos. Para o sistema mtrico

(UE eoutras localidades):

Use os parafusos de cabea chata/

escareada M3.5 x 12mm fornecidos. PLT-03704, Rev. A.1 22 December 2019 2 Cabeamento do leitor Com cabo flexvel de conexo (rabicho) Verso com rgua de bornes 18" (0,46 m) CABO FLEXVEL DE CONEXO (RABICHO) TERMINAL DESCRIO Vermelho Preto Branco Verde Laranja Amarelo Azul Marrom Violeta/Branco Violeta Sem isolamento 1 2 3 4 5 6 7 8 9 10

+VCC Terra (RTN) Dados Wiegand 1/Relgio/RS485-A*

Dados Wiegand 0/Dados/RS485-B*

Entrada de LED (VERDE) Entrada de bper Entrada de reteno/entrada de LED (AZUL)*

Entrada de LED (VERMELHO) Tamper2 (RLY2) Tamper1 (RLY1) Drenagem (somente modelos com cabo flexvel de conexo (rabicho))

*Dependente da configurao do leitor. Nota: Se o cabeamento for feito de maneira incorreta, o leitor pode sofrer danos permanentes. Nota: Os leitores iCLASS anteriores tinham uma fiao RS-485 invertida (P2-7 & P2-6 - A e B). Ao fazer o upgrade para um leitor HID Signo, verifique se as conexes esto corretas conforme definido abaixo. Nota: Os cabos de dados 0 e 1 do Wiegand podem ser reutilizados no OSDP. No entanto, o cabo Wiegand padro pode no atender s recomendaes de par tranado RS485. Nota: Para comprimentos de cabo OSDP maiores que 61 m (200 ft) ou se houver interferncia por CEM, instale um resistor de 120 +/- 2 nas extremidades da fiao RS-485. Nota: Para a configurao do teclado, com o leitor do teclado operando como emulao de 26 bits, digite o cdigo da instalao seguido de # dentro de cinco segundos aps a inicializao. O cdigo da instalao deve ser digitado com trs dgitos (ou seja, para um cdigo de instalao de 10, digite 0-1-0-#). Se essa operao no for bem-sucedida, o LED do leitor ficar aceso em vermelho. Desligue e ligue o leitor e tente inserir o cdigo da instalao novamente. Os leitores HID Signo usam cdigos de instalao entre 1-255 e nenhum padro definido. Depois que um cdigo deinstalao inserido, o LED do leitor se acende na cor violeta e depois fica vermelho. Em seguida, ligue e desligue oleitor. Se houver dois bipes curtos aps a insero de um PIN, o cdigo da instalao do leitor no est configurado. Neste caso, desligue e ligue o leitor e tente inserir o cdigo da instalao novamente. PLT-03704, Rev. A.1 23 December 2019 3 Fixao do leitor na placa de montagem 1 1. Encaixe a parte superior do leitor parte superior da placa de montagem. 2. Alinhe a parte inferior do leitor parte inferior da placa de montagem. 3. Prenda o leitor na placa de montagem usando o parafuso 0,138-32 x 0,375 fornecido. Parafuso de segurana/anti-tamper:

parafuso 0,138-32 x 0,375" (fornecido) Parafuso de no-segurana/padro:

parafusos 0,138-32 x 0,375" (fornecidos) 2 3 4 Operao e teste do leitor Ligue o leitor. O leitor emite um sinal sonoro e o LED pisca. Teste o leitor com uma credencial. Oleitor emite umsinal sonoro eoLEDpisca. PLT-03704, Rev. A.1 24 December 2019 GUIDA ALLI NSTALLAZIONE Lettore HID Signo Lettori contactless e con tastiera 13,56 MHz/125 kHz/2,4 Modelli SRD: 20, 20 K, 40, 40K PLT-03704, Rev. A.1 Parti fornite Lettore HID Signo (1) Guida allinstallazione (1) Viti autofilettante a testa piatta/svasata da 0,138-20 x 1,5 pollici (2), per installare il lettore direttamente aparete (senza scatola di giunzione) Viti a testa piatta/svasata da 0,138-32 x 0,375 pollici

(3) per l'installazione della scatola di giunzione in formato imperiale (USA, 2) e per fissare il lettore allapiastra di montaggio (1) Viti a testa piatta/svasata M3,5 x 12 mm (2) per linstallazione della scatola di giunzione in formato metrico (UE, ecc.) Vite di sicurezza 0,138-32 x 0,375 pollici (1), vite antimanomissione alternativa per fissare il lettore allapiastra di montaggio Parti consigliate (non fornite) Cavo, conduttore 5-10 (Wiegand o Clock-and-Data), conduttore 4 con doppino intrecciato, completamente schermato e approvato UL, Belden 3107A o equivalenti

(OSDP) Alimentatore CC con certificazione LPS Scatola di giunzione metallica o in plastica Utensile di sicurezza HID 04-0001-03 (per vite antimanomissione) Trapano con varie punte per la minuteria di montaggio Minuteria di montaggio Distanziatore per lettore per il montaggio su o vicino a parti metalliche o scatole di giunzione metalliche. Fare riferimento alla guida Come ordinare lettore ecredenziali (PLT-02630) per le opzioni disponibili einumeri di parte Connettori del terminale a 5 pin (2) (solo nei modelli Scatola di giunzione con morsettiera) Specifiche CORRENTE MEDIA STANDBY1 MEDIA MAX2 PICCO3 TEMPERATURA DI ESERCIZIO LUNGHEZZA DEL CAVO TENSIONE IN INGRESSO (V CC) 12 V CC 20 20K 40 40K 60 mA 70 mA 250 mA 65 mA 75 mA 250 mA 65 mA 75 mA 250 mA 70 mA 80 mA 250 mA Da -35 a 66 C Linee di comunicazione Wiegand = 500 ft - 18 AWG (152 m) 300 ft - 20 AWG (91 m) RS-485 = Lunghezza bus max: 4.000 ft - 24 AWG (1.219 m) Lunghezza max tra i nodi: 1.640 ft - 24 AWG (500 m) NUMERO RIF. NORMATIVO 20 20K 40 40K FREQUENZA ID FCC BLE: 2,4-2,480 GHz, HF: 13,56 MHz, LF: 125 kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K ID IC 1 Media standby: corrente assorbita RMS senza tessera nel campo RF. 2 Media max: corrente assorbita RMS durante le letture continue delle tessere. Non valutato da UL. 3 Picco: corrente istantanea massima assorbita durante la comunicazione RF. 2236B-SIGNO40 2236B-SIGNO20 2236B -20K 2236B -40K hi d g lo bal.com Funzionalit opzionali Tamper: abilitato per impostazione predefinita e attivato quando viene rimossa la piastra di montaggio. Il tamper normalmente chiuso e passa al circuito aperto tra le linee di controllo Tamper 1 e Tamper 2. Le linee di controllo Tamper 1 e Tamper 2 sono intercambiabili. Ognuna di queste linee pu essere connessa alla linea di terra del lettore per ridurre il numero di conduttori richiesti nel cavo del lettore. Tamper 1 e Tamper 2 sono classificate come: da 0-12 V CC a 100mA. Ingresso Hold: se sostenuta, questa linea sostituisce una tessera (predefinita) o disattiva la lettura di una tessera fino al rilascio, in base alla configurazione. 1 Montare la piastra di montaggio Maneggiare con cura i DISPOSITIVI SENSIBILI ALLE SCARICHE ELETTROSTATICHE, attenendosi alle precauzioni ATTENZIONE ATTENZIONE: installare il lettore su una superficie piana e stabile. In caso contrario, si potrebbe compromettere la classificazione IP e/o la funzionalit antimanomissione. In caso di montaggio su o vicino al metallo, per prestazioni di lettura ottimali, si consiglia un distanziatore. Fare riferimento alla guida Come ordinare lettore e credenziali

(PLT-02630) per le opzioni disponibili e i numeri di parte ATTENZIONE: utilizzare le viti in dotazione per garantire il corretto montaggio ed evitare di danneggiare il lettore o la piastra di montaggio. HID non responsabile per danni causati dall'uso di minuteria di montaggio non approvata. Per il formato Imperial (US):

utilizzare le viti a testa piatta/svasata fornite da 0,138-32 x 0,375 pollici. Per il formato metrico (UE ecc.):

utilizzare le viti a testa piatta/

svasate da M3,5 x 12 mm in dotazione. PLT-03704, Rev. A.1 26 December 2019 2 Cablare il lettore Versione con cavo flessibile Versione con morsettiera 18" (0,46 m) CAVO FLESSIBILE TERMINALE DESCRIZIONE Rosso Nero Bianco Verde Arancione Giallo Blu Marrone Viola/Bianco Viola Scoperto 1 2 3 4 5 6 7 8 9 10

+V CC Terra (RTN) Wiegand Data 1 / Clock / RS485-A*

Wiegand Data 0 / Data / RS485-B*

Ingresso LED (GRN) Ingresso avvisatore acustico Ingresso Hold/Ingresso LED (BLU)*

Ingresso LED (RED) Tamper 2 (RLY2) Tamper 1 (RLY1) Terra (solo modelli con cavo flessibile)

*In base alla configurazione del lettore. Nota: un collegamento non corretto del lettore pu provocare in questultimo danni permanenti. Nota: i precedenti lettori iCLASS presentavano un cablaggio RS-485 inverso (P2-7 & P2-6 - A & B). Quando si passa aun lettore HID Signo, verificare la correttezza dei collegamenti come descritto in precedenza. Nota: i cavi dati 0 e dati 1 per Wiegand possono essere riutilizzati per OSDP. Tuttavia, il cavo Wiegand standard potrebbe non essere conforme ai requisiti per i doppini ritorti RS485. Nota: per cavi OSDP di lunghezza superiore a 200 ft (61 m) o interferenza EMF, installare una resistenza 120 +/- 2 alle estremit di terminazione RS-485. Nota: per la configurazione della tastiera, con il lettore con tastiera funzionante come emulazione a bit 26, immettere il codice struttura (facility code), seguito da # entro cinque secondi dall'accensione. Il codice struttura inserito deve contenere tre cifre (ad esempio, per un codice struttura di 10 immettere: 0-1-0-#). Se loperazione ha esito negativo, il LED del lettore sar rosso fisso. Spegnere e riaccendere il lettore, quindi riprovare a inserire il codice struttura. I lettori HID Signo usano codici struttura compresi tra 1 e 255 e non viene impostato alcun valore predefinito. Una volta immesso un codice struttura, il LED del lettore si illumina prima in viola, quindi in rosso fisso. Infine spegnere eriaccendere il lettore. Se dopo l'immissione di un PIN vengono emessi due brevi segnali acustici, il codice struttura del lettore non configurato. In tal caso, spegnere e riaccendere il lettore, quindi riprovare a inserire il codice struttura. PLT-03704, Rev. A.1 27 December 2019 3 Fissaggio del lettore alla piastra di montaggio 1 1. Agganciare la parte superiore del lettore alla parte superiore della piastra di montaggio. 2. Allineare la parte inferiore del lettore alla parte inferiore della piastra di montaggio. 3. Fissare il lettore alla piastra di montaggio utilizzando la vite da 0,138-32 x 0,375 pollici fornita in dotazione. Vite di sicurezza/anti-manomissione:

vite da 0,138-32 x 0,375 pollici (fornita) Vite standard/non di sicurezza:

viti da 0,138-32 x 0,375 pollici (fornite) 2 3 4 Alimentazione ed esecuzione del test sul lettore Accendere il lettore. Il lettore emetter un segnale acustico e il LED lampegger. Testare il lettore con le credenziali. Illettore emetter un segnale acustico e il LED lampegger. PLT-03704, Rev. A.1 28 December 2019 HID Signo 13.56 MHz / 125 kHz / 2.4 GHz SRD 20K 40 40K 20 PLT-03704, Rev. A.1 2 HID Signo

(1)

(1)

0.138-20 x 1.5 0.138-32 x 0.375

(2) M3.5 x 12mm 0.138-32 x 0.375

5

(2) 3

(1) 2 1 5-10 Wiegand

(OSDP) UL Clock-and-Data Belden 3107A 4 LPS HID 04-0001-03

(PLT-02630)

20 20K 40 40K 12V DC 60 mA 70 mA 250 mA 65 mA 75 mA 250 mA F

-30 65 mA 75 mA 250 mA C 66 70 mA 80 mA 250 mA C F

-35 150

- 20 AWG

- 18 AWG 91 152 Wiegand = 500 300 RS-485 =

1,640

- 24 AWG 500 4,000

- 24 AWG 1,219 20K 40 40K 20 BLE: 2.42.480 GHz, HF: 13.56 MHz, LF: 125 kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K 2236B-SIGNO20 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO40K AVG - RF AVG -

- RF RMS RMS UL

(V DC) AVG1 MAX AVG2 3 FCC ID IC ID 1 2 3 hi d g lo bal.com Tamper 1 Tamper 1 Tamper 2 Tamper 2 Tamper 2 Tamper 1 012VDC 100mA 1

IP

(PLT-02630) HID

0.138-32 x 0.375

M3.5 x 12mm PLT-03704, Rev. A.1 30 December 2019 2 18"

0.46

1 2 3 4 5 6 7 8 9 10

+VDC

(RTN) Wiegand Data 1 / Clock / RS485-A*

Wiegand Data 0 / Data / RS485-B*

LED

(GRN)

(BLUE)*

/ LED

(RED) LED Tamper 2 (RLY2) Tamper 1 (RLY1) iCLASS RS-485

(P2-7 P2-6 - A B) HID Signo Wiegand Data 0 Data 1 OSDP 200

(61m) EMF OSDP Wiegand RS-485 RS485 120

+/- 2 LED 26 10 0-1-0-

LED 1-255 HID Signo PIN PLT-03704, Rev. A.1 31 December 2019 1. 2. 3. 0.138-32 x 0.375"

0.138-32 x 0.375"

0.138-32 x 0.375"

3 1 2 3 4 LED LED PLT-03704, Rev. A.1 32 December 2019 HID Signo 13.56 MHz / 125 KHz / 2.4 GHz SRD 20K 20 40 HID Signo

(1)

(1)

(2) 0.138-20 x 1.5"

0.138-32 x 0.375"

0.138-32 x 0.375"

M3.5 x 12mm

(2)

(3)

(2)

(1)

(1) EU

5-

2 40K PLT-03704, Rev. A.1 Wiegand 10 5 Clock-and-Data Belden UL 4 3107A OSDP LPS DC HID 04-0001-03 PLT-02630 20 20K 40 40K 12V DC 60mA 70mA 250mA 65mA 75mA 250mA

-30 F 65mA 75mA 250mA C) 66 150 C F (-35 Wiegand = 500 ft - 18 AWG (152 m) 91 m - 20 AWG 300 70mA 80mA 250mA RS-485 =

:1,219 m - 24 AWG 4,000

:500 m - 24 AWG 20 20K JQ6-SIGNO20 BLE: 2.42.480 GHz JQ6-SIGNO20K 1,640 40 HF: 13.56 MHz 40K LF: 125 kHz JQ6-SIGNO40 JQ6-SIGNO40K 2236B-SIGNO20 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO40K AVG -

RF RMS RMS UL V DC AVG1 AVG2 3 FCC IDS IC IDS 1 2 3 AVG -

- RF hi d g lo bal.com 1 2 012VDC 100mA 2 2 1 1

1

IP PLT-02630 HID

0.138-32 x 0.375"

EU M3.5 x 12mm

PLT-03704, Rev. A.1 34 December 2019 2 18" (0.46m)

1 2 3 4 5 6 7 8 9 10 1 /

0 /

/ RS485-A*

/ RS485-B*

+VDC

(RTN) Wiegand Wiegand

LED LED

/ LED

2 (RLY2) 1 (RLY1)

: OSDP

iCLASS RS-485

: Wiegand 0 1 OSDP

(P2-7 P2-6 A B) HID Signo Wiegand RS485 61 m (200

) EMF 120

+/- 2 RS-485 HID Signo LED 255 1 26 3 10 5 0-1-0-

2 PIN LED PLT-03704, Rev. A.1 35 December 2019 3 1 1. 2. 3. 0.138-32 x 0.375"

0.138-32 x 0.375"

0.138-32 x 0.375"

2 3 4 LED LED PLT-03704, Rev. A.1 36 December 2019 HID Signo 13.56MHz/125KHz/2.4GHz SRD

: 20, 20K, 40, 40K

(1) HID Signo

(1) 0.138-20 x 1.5 0.138-32 x 0.375

) M3.5 x 12mm 0.138-32 x 0.375

(2)

(3)

(1)

(2)

(2)

(EU

(1) 5

(2) PLT-03704, Rev. A.1

, 5-10 UL

(OSDP)

(Wiegand

, Belden 3107A Clock & Data) , 4

) DC HID 04-0001-03 (

(PLT-02630) LPS

. 20 20K 40 40K 12V DC 60mA 70mA 250mA 65mA 75mA 250mA

-35 65mA 75mA 250mA F) 70mA 80mA 250mA C ~ 66 C (-30 F ~ 150 Wiegand = 500

-18AWG (152m) 300

- 20AWG (91m) RS-485 =

20K 20 4,000

- 24AWG (1,219m)

: 1,640

- 24AWG (500m) 40 40K BLE: 2.4 ~ 2.480GHz, HF: 13.56MHz, LF: 125kHz JQ6-SIGNO20 JQ6-SIGNO20K JQ6-SIGNO40 JQ6-SIGNO40K 2236B-SIGNO20 2236B-SIGNO20K 2236B-SIGNO40 2236B-SIGNO40K

- RF

- RF RMS RMS

. UL

(V DC) 1 2 3 FCC IDS IC IDS 1 2 3 hi d g lo bal.com 1

. 2 1 2

. 0 ~ 12VDC

. 100mA

. 1 2

) . 1

. IP

(PLT-02630)

. HID

. 0.138-32 x 0.375

(EU

M3.5 x 12mm PLT-03704, Rev. A.1 38 December 2019 2 18

(0.46m)

1 2 3 4 5 6 7 8 9 10

+VDC

(RTN) Wiegand Data 1/Clock/RS485-A*

Wiegand Data 0/Data/RS485-B*

LED LED

/LED

(GRN)

2 (RLY2) 1 (RLY1)

RS-485

. 0 1

. 200 26

iCLASS

: Wiegand

: OSDP

. 3 HID Signo

(P2-7 P2-6 - A B). HID Signo OSDP

. Wiegand RS485

(61m) EMF RS-485 120

+/- 2 1~255

. 10 0-1-0-#

) . 5 LED

. PIN

. LED PLT-03704, Rev. A.1 39 December 2019

. 1. 2. 3. 0.138-32 x 0.375

0.138-32 x 0.375

0.138-32 x 0.375

) 3 1 2 3 4

. LED

. LED PLT-03704, Rev. A.1 40 December 2019 Regulatory UL Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Suitable for outdoor use. Only Wiegand, OSDP, and Bluetooth communications have been evaluated by UL. HID Signo readers are compatible with HID Mobile Access version 3.0.0 and later using mobile devices with BLE version 4.2 and later listed at: https://www.hidglobal.com/mobile-access-compatible-devices. Install in accordance with NFPA70 (NEC) Local Codes, and authorities having jurisdiction. Follow all National and Local Codes. UL 294 Performance Levels MODEL #

ACCESS CONTROL LINE SECURITY 20 / 20K / 40 / 40K Level I Level IV LEVEL Level I LEVEL Level I DESTRUCTIVE ATTACK LEVEL ENDURANCE LEVEL STAND-BY POWER CONDITIONS FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada Radio Certification This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. PLT-03704, Rev. A.1 41 December 2019 CE Marking HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU. HID Global dclare par la prsente que ces lecteurs proximit sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 2014/53/EU. A HID Global, por meio deste, declara que estes leitores de proximidade esto em conformidade com as exigncias essenciais e outras condies da diretiva 2014/53/EU. HID Global besttigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU erfllen. HID Global dichiara che i lettori di prossimit sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 2014/53/EU. Download copies of the Radio Equipment Directive Declaration of Conformity (DoC) at:

http://www.hidglobal.com/certifications Taiwan According to Administrative Regulations on Low Power Radio Waves Radiated Devices Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-

frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Korean KCC 20, 20K, 40, 40K RFID:13.56 MHz RFID:13.56 MHz RFID: 10m 47.544mv DC 12.0V A1D X-tal RFID: ASK, NFC: GFSK Russia 140573,,.,,. . e-mail

+74952236008 local.declarant@gmail.com PLT-03704, Rev. A.1 42 December 2019 Japan MIC

(AC-) RFID Japan Giteki for BLE R xxx-xxxxxx Israel

, . Brazil Compliance Statement Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo 242/2000, e atende aos requisitos tcnicos aplicados. Para maiores informaes, consulte o site da ANATEL -

www.anatel.gov.br This product is homologated at ANATEL according to procedure regulated by Resolution 242/2000, and it complies with the applicable technical requirements. For more information, consult ANATEL website - www.anatel.gov.br RF Warning Statement Per Article 6 of Resolution 506, equipment of restricted radiation must carry the following statement in a visible location:

Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. This equipment operates in secondary character, meaning it does not have the right of protection against harmful interference, even against those the same character, and it cannot cause any interference to systems operating in the primary character. HHHHH-AA-FFFFF HHHHH-AA-FFFFF UAE TRA REGISTERED NO:

nnnnnnn DEALER NO:

DA37204/14 Singapore Complies with IMDA Standards DB106440 PLT-03704, Rev. A.1 43 December 2019 Indonesia

(Certificate Number)

(PLG ID Number) South Africa TA XXXX-YYYY APPROVED E4662 Australia and New Zealand PLT-03704, Rev. A.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HID Signo 40K 2019 HID Global Corporation Made in Mexico All rights reserved. Pat, www.hidglobal.com/patents 40KNKS FW: 00900-C.2 FCC ID: JQ6-SIGNO40K IC: 2236B-SIGNO40K S/N: LR191129-00-S1.100 Ratings: PLT-03703 Rev A.0 SRD Model: 40K 40K

: _WS_

 

 

HID Signo 40K 2019 HID Global Corporation Made in Mexico All rights reserved. Pat, www.hidglobal.com/patents 40KNWS FW: 00900-C.2 FCC ID: JQ6-SIGNO40K IC: 2236B-SIGNO40K S/N: LR191129-00-S1.100 Ratings: PLT-03703 Rev A.0 SRD Model: 40K 40K

: _WS_

 

 

HID Signo 40K 2019 HID Global Corporation Made in Mexico All rights reserved. Pat, www.hidglobal.com/patents 40KTKS FW: 00900-C.2 FCC ID: JQ6-SIGNO40K IC: 2236B-SIGNO40K S/N: LR191129-00-S1.100 Ratings: PLT-03703 Rev A.0 SRD Model: 40K 40K

: _WS_

 

 

HID Signo 40K 2019 HID Global Corporation Made in Mexico All rights reserved. Pat, www.hidglobal.com/patents 40KTWS FW: 00900-C.2 FCC ID: JQ6-SIGNO40K IC: 2236B-SIGNO40K S/N: LR191129-00-S1.100 Ratings: PLT-03703 Rev A.0 SRD Model: 40K 40K

: _WS_

 

 

 

 

 

 

 

 

 

 

Long Term Confidentiality Request Letter 9/21/2018 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR JQ6-SIGNO40K To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Block Diagrams, Schematics, Operational Descriptions, and BOM required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of our competition). Please contact me if there is any information you may need. Sincerely, Signature:

Name: Robert Cresswell Applicant: HID Global Corporation ADDRESS: 611 Center Ridge Drive, Austin, TX 78753 USA TEL: 952-221-5356 FAX: 952-826-7948 ________________

 

 

Short Term Confidentiality Request Letter 9/12/2018 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For JQ6-SIGNO40K To Whom It May Concern:

In accordance with sections 0.457 and 0.459 of CFR 47, HID Global Corp. requests short-term Confidentiality of following sections of this application for a period of 45 days after grant is issued. Test setup photos External photos Internal photos Users manual These documents contain detailed system and equipment descriptions and related information about the product, which HID Global Corp. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, HID Global Corp. feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature:

Name: Robert Cresswell Applicant: HID Global Corporation ADDRESS: 611 Center Ridge Drive, Austin, TX 78753 USA TEL: 952-221-5356 FAX: 952-826-7948 ________________